Note: This article contains affiliate links. If you click on these links and make a purchase, I may earn a small commission at no extra cost to you. This helps support my research and content. Read my full affiliate disclaimer here.
Picking the right Hyundai Elantra oil filter housing matters because this component controls oil routing and sealing at the engine. A poor fit or a failing seal can lead to leaks, oil loss, or engine stress, while the correct housing keeps service simple and the lubrication system secure. This guide highlights seven shortlisted oil filter housings that meet common Elantra fitment needs. We evaluated each option on fit accuracy, sealing surfaces, and material durability to help you identify housings suited to long-term, trouble-free use. Read on to see the top picks and what to consider before you replace a housing.
Looking for other parts? See all Hyundai Elantra parts & accessories.
Top Picks at a Glance
| Best Reviewed A top-rated pick with lots of positive feedback | KUTTOLE Aluminum Oil Filter Housing Kit (26300-3LAA0) with Seal, Filter & Cap |  |
| Most Popular A crowd favorite that many people choose with confidence | ROVIKE Oil Filter Housing Cap with Drain Plug |  |
| Best Quality Built to a higher standard if you want something more solid | APSG Toyota Genuine Oil Filter and Aluminum Housing Cap Kit (A1 Full Kit) |  |
| Best Budget The cheapest option that still gets the job done reliably | A-Premium Oil Filter Housing Cap Assembly (3.3L/3.5L) Compatible with Kia and Hyundai V6 Models |  |
| Most Sold A high-volume bestseller chosen again and again | Yinlowa 15620-31060 Aluminum Oil Filter Housing Cap Assembly with Oil Plug |  |
| Best Value for Money The sweet spot between price and what you get | A-Premium Oil Filter Housing Cap with O-Ring (vehicle specific) |  |
| Best Overall The best all-around choice for most situations | XINLIN Aluminum Oil Filter Housing Complete Assembly (26300-3LAA0) |  |
1. KUTTOLE Aluminum Oil Filter Housing Kit (26300-3LAA0) with Seal, Filter & Cap
| Material | Aluminum |
|---|---|
| Thread Size | M16 x 1.5 |
| OEM Part Number | 26300-3LAA0 |
| Automotive Fit Type | Vehicle Specific Fit |
This KUTTOLE kit replaces the factory oil filter housing with an aluminum assembly and ships with the seal ring, filter and cap needed for a single service. It installs like a direct replacement and is intended to reduce leaks common with plastic housings by using metal construction and silicone-enhanced seals. The housing includes a built-in pressure relief intended to protect the engine if pressure spikes occur, and the seller claims the multi-layer filter traps metal debris to reduce wear. For a reliability-focused owner the practical benefits are clear: stronger housing material, extra sealing components in the kit, and a relief valve that can prevent catastrophic failure. Expect a straightforward install with basic tools but note the listing ties fitment to specific Hyundai/V6 models; confirm compatibility with your Elantra engine and year before buying. This is a preventive replacement aimed at owners who prioritize long-term durability over sticking with the factory plastic part.
Best for: Reliability-focused buyers who prioritize preventing oil leaks and engine damage and who prefer a stronger, longer-lasting replacement over keeping the original plastic housing.
Less Ideal for: Owners looking solely for the cheapest short-term repair or those who need a housing specifically certified for a different engine or model without confirming fitment.
- Aluminum housing offers greater resistance to heat and cracking than common plastic housings.
- Includes seal ring, oil filter and cap so you get all required replacement parts in one kit.
- Built-in pressure relief valve provides immediate protection during oil pressure spikes.
- Multi-layer filter design targets metal debris to help reduce engine wear.
- Product description lists fitment for V6 Hyundai/Kia/Genesis models so may not directly match Elantra variants without verification.
- Claims about lifetime warranty and performance improvements are vendor statements and may vary in real-world conditions.
Verdict A complete aluminum replacement kit aimed at reducing leak risk and improving durability for owners who want a more robust long-term oil filter housing solution.
2. ROVIKE Oil Filter Housing Cap with Drain Plug
| Material | Acrylonitrile Butadiene Styrene (ABS) |
|---|---|
| Compatible Part Numbers | 15620-36010, 15620-36020, 15643-31050 |
| Package Contents | Oil filter housing cap, cap plug, gasket |
This ROVIKE oil filter housing cap is a plastic replacement assembly that includes the cap, drain plug, and gasket for servicing the engine oil filter. It installs in place of the factory housing cap and is intended to let you remove and reinstall the filter cover during routine oil changes without needing the original part. The kit includes the small oil drain plug so you can drain filter housing oil more cleanly during service. Made from ABS plastic, the cap is lightweight and users report it fits like the factory part on compatible vehicles and stops leaks when installed and torqued correctly. Because it is plastic, care is needed to avoid over-torquing the threads; several buyers recommend using moderate torque on reassembly. This is a practical convenience item to keep on hand for simple at-home maintenance or to replace a worn or leaking cap, but it is not a metal upgrade and may wear faster under rough service conditions compared with metal alternatives.
Best for: Convenience-driven owners who prioritize straightforward, ready-to-install parts for routine maintenance and want a simple solution to replace a leaking or stripped oil filter cap.
Less Ideal for: Drivers seeking a heavy-duty, long-life metal upgrade or those who plan frequent high-stress track or towing use should consider more robust alternatives.
- Includes cap, drain plug, and gasket for a one-stop replacement
- Direct-replacement fit reported by multiple users for compatible vehicles
- ABS construction resists corrosion and is easy to handle during installation
- Helps contain oil when servicing the filter thanks to the integrated drain plug
- Plastic construction means threads can strip if over-tightened
- Not described as a reinforced or metal version for heavy-duty longevity
Verdict A convenient, ready-to-install plastic replacement that restores function and stops leaks for routine oil service but is not a heavy-duty metal upgrade.
3. APSG Toyota Genuine Oil Filter and Aluminum Housing Cap Kit (A1 Full Kit)
| Brand | APSG |
|---|---|
| Material | Aluminum, Paper |
| Thread Size | NPT 3/4" |
| Product Grade | Replacement Part |
This kit combines a factory-spec 04152-YZZA1 oil filter with an aluminum oil filter housing cap, cap plug, crush washer, and a dedicated cap wrench to simplify oil changes. It is intended to replace fragile plastic housing caps with a durable metal assembly that resists cracking during removal and provides a more robust sealing surface. Typical use is a direct replacement during routine oil service by a DIYer or technician; the included wrench and drain adapter speed removal and minimize cross-threading or damage to the housing. Buyers report the filter media fits as expected and the metal cap threads smoothly for a leak-free install. Limitations to note are that the kit is listed for specific Toyota, Lexus, Scion, and some Toyota platform vehicles and the filter element in the kit may not match every vehicle's exact part number without verification, so confirm compatibility before ordering. Some users needed to swap center tubes or found the plastic funnel sticky in the aluminum housing on removal.
Best for: Performance-oriented buyers who prioritize durable, factory-quality components and want a long-lasting upgrade that reduces the chance of housing damage during frequent oil changes.
Less Ideal for: Buyers seeking a universal or vehicle-agnostic oil filter kit or those who prefer to stick strictly to parts listed for Hyundai Elantra without verification should look elsewhere.
- Aluminum housing cap replaces fragile plastic for greater durability and longevity.
- Includes a dedicated cap wrench that fits the housing for easier, safer removal.
- Comes with a genuine-style oil filter and necessary crush washer for a cleaner service.
- Direct-fit replacement design minimizes installation fuss when vehicle compatibility is correct.
- Kit is specified for Toyota/Lexus/Scion applications so fitment to other makes is not guaranteed.
- Some users reported needing to swap internal parts like the center tube for certain models.
- The small plastic funnel included can stick in the aluminum housing during drain removal.
Verdict A durable aluminum housing and genuine-style filter kit built for long-term reliability, but verify vehicle compatibility before buying.
4. A-Premium Oil Filter Housing Cap Assembly (3.3L/3.5L) Compatible with Kia and Hyundai V6 Models
| Manufacturer Part Number | APOFH080 |
|---|---|
| OEM Part Number | 917-493;263503CAB1 |
| Brand | A-Premium |
This oil filter housing cap replaces the factory cap and is intended to secure the oil filter cartridge and maintain a reliable seal during operation. It ships with a replacement O-ring and installs with basic hand tools, so it is typically used during routine oil changes or when the original cap is damaged. The manufacturer states it is built to factory-spec dimensions for direct fitment, which simplifies installation and preserves the engine bay appearance. Practical benefits include a low price, an included O-ring, and generally positive user reports of correct fit on compatible V6 models. Notable limitations are occasional reports of fitment problems and oil leakage on certain vehicles, so careful inspection at installation is recommended. The product carries a one-year unlimited-mileage guarantee from the brand, which provides extra assurance for budget-focused buyers.
Best for: Budget-conscious owners who prioritize an inexpensive, direct-fit replacement cap for routine maintenance and prefer a simple DIY installation.
Less Ideal for: Drivers seeking a guaranteed perfect fit for vehicles not listed in the compatibility notes or those who prefer a premium OEM-priced replacement with manufacturer backing.
- Factory-spec design for direct-fit replacement on listed 3.3L and 3.5L V6 applications
- Includes a replacement O-ring to restore a proper seal during installation
- Low-cost option that reduces the expense of routine maintenance
- Easy installation with common hand tools and no special equipment
- Some user reports indicate fitment variance leading to leaks on certain vehicles
- Not explicitly referenced for Hyundai Elantra V4/V6 compatibility in the listing
Verdict A low-cost, factory-spec oil filter housing cap that works well for compatible V6 models but requires careful fit verification to avoid potential leaks.
5. Yinlowa 15620-31060 Aluminum Oil Filter Housing Cap Assembly with Oil Plug
| Material | Aluminum |
|---|---|
| Product Grade | Replacement Part |
| Automotive Fit Type | Vehicle Specific Fit |
| OEM Part Number | 15620-31060 / 1562031060; Plug 15643-31050 / 1564331050 |
This aluminum oil filter housing cap assembly replaces the stock plastic cover with a metal housing, and it includes the oil plug and gasket for a complete swap. It is intended to be used during routine oil service to stop leaks, prevent cracks that commonly affect plastic housings, and make future oil changes easier. The housing is constructed of aluminum for greater durability and the listing notes factory-quality fit and a hand-screw installation with a final wrench torque. Buyers report snug fitment and improved resistance to over-tightening compared with plastic caps. Practical benefits include longer service life, reduced chance of oil seepage, and easier handling at oil changes. Limitations to consider are occasional fitment variance compared with the original part and reports of slightly different internal shaft or filter depth on some units, so verifying compatibility with the specific vehicle and part number before ordering is important.
Best for: Risk-averse mainstream buyers looking for a more durable, low-maintenance replacement to avoid repeat repairs and minimize oil-leak risk during routine service.
Less Ideal for: Those who prefer strictly OEM parts or who need guaranteed fitment for a specific Hyundai Elantra year and engine without cross-checking part numbers should consider factory replacements instead.
- Aluminum construction resists cracking and handles over-tightening better than factory plastic caps
- Includes oil plug and gasket for a complete replacement during an oil service
- Direct-replacement design intended for straightforward hand-screw installation with minimal tools
- Some units show minor differences in internal shaft or filter depth compared with the original part
- Not an OEM Toyota or Hyundai part so exact factory interchange is not guaranteed
Verdict A durable aluminum replacement that reduces the common failure points of plastic housings, but confirm exact fitment for your Hyundai Elantra before installing.
6. A-Premium Oil Filter Housing Cap with O-Ring (vehicle specific)
| Manufacturer Part Number | APOFH073 |
|---|---|
| OEM Equivalent Part Number | MO365, 263503C701 |
| Material Type | Metal |
| Automotive Fit Type | Vehicle Specific Fit |
This oil filter housing cap replaces the factory cap on compatible Hyundai and Kia V6 applications and comes with a replacement O-ring for a single, complete repair. It is molded from engineering-grade plastic and built to match the listed OEM equivalent part numbers so it snaps into place and seals the oil filter housing without modification. Installation is straightforward for a DIY oil change: the cap is grippy for hand-starting and accepts a socket for final snugging, which speeds up the job and eliminates the need to reuse a worn factory cap. Practical benefits include a full parts kit in the box and a one-year unlimited-mileage guarantee for peace of mind. Limitations are that the cap is plastic rather than metal, so careful torque control is needed to avoid cracking the threads, and compatibility must be confirmed by vehicle year and engine before purchase because the listing is vehicle-specific.
Best for: Practical optimizers who prioritize getting a reliable, budget-conscious factory-style replacement part and want to handle routine maintenance themselves to save money.
Less Ideal for: Buyers who prefer metal components for long-term durability or those who need universal multi-model fitment should look for alternative options.
- Vehicle-specific fit designed to match OEM part numbers for a direct replacement
- Includes O-ring so you get everything needed for the housing cap swap
- Manufactured from engineering-grade plastic for heat resistance and durability
- Simple installation that can be completed during a standard oil change
- Plastic construction requires careful torqueing to avoid cracking threads or cap
- Fitment is limited to specific Hyundai/Kia V6 applications and must be verified against year and engine
Verdict A low-cost, vehicle-specific replacement cap that includes the seal and is easy to install, but handle with care because it is plastic and fitment is limited.
7. XINLIN Aluminum Oil Filter Housing Complete Assembly (26300-3LAA0)
| Brand | XINLIN |
|---|---|
| Material | Aluminum |
| Product Grade | Replacement Part |
| Vehicle Service Type | Car, Sports Utility Vehicle, Van |
This aluminum oil filter housing assembly replaces the common plastic cartridge housing with a machined metal unit that includes the filter, cap, and sealing ring for a one-piece swap. It is typically used when the factory plastic housing has cracked or started leaking; installation follows a standard oil-filter housing replacement flow and can be completed by a competent DIYer or a shop. Notable features include multiple oil flow channels and precision sealing points intended to reduce leaks and improve thermal durability compared with plastic housings. The package lists the housing, filter, cap, and seal ring sized to match the listed part numbers so you get a near-complete replacement in one purchase. Important limitations are that this is a vehicle-specific fit and must match the Elantra's engine platform and part number to be compatible, and some buyers have noted uncertainty about the quality of individual subcomponents like the pressure relief valve. Expect a sturdier, longer-lasting housing but verify fitment and inspect valve parts during installation.
Best for: Balanced owners who prioritize a reliable, longer-lived replacement over cosmetic OEM parity and want a mostly complete repair solution they can install themselves or hand to a shop.
Less Ideal for: Buyers who prefer fully validated dealer parts with manufacturer-backed support or those who need confirmed fitment for a vehicle not listed should consider dealer or model-specific alternatives.
- Aluminum construction offers higher heat and impact resistance than factory plastic housings
- Includes filter, cap, and sealing ring for a near-complete replacement
- Precision-machined oil channels and sealing points aimed at reducing leaks
- Vehicle-specific design for a closer, plug-and-play fit
- Compatibility is vehicle- and engine-specific so wrong part selection will prevent fitment
- Some users expressed concerns about the quality of internal valve components rather than the housing body
Verdict A stronger aluminum replacement housing that cuts leak risk and simplifies repair for owners seeking a durable upgrade, provided you confirm exact fitment.
Choosing the Right Hyundai Elantra Oil Filter Housing: Key Factors to Consider
Fitment and Mounting Accuracy
Accurate fitment matters because the housing must align precisely with the engine block, oil galleries, and filter housing studs or bolts. Misalignment can cause stress on mounting points, lead to oil leaks, or prevent proper sealing even if the gasket looks intact.
When choosing a replacement, confirm that bolt spacing, gallery ports, and overall housing shape match the vehicle's specifications. Proper fit reduces installation time and minimizes the chance of vibration-related loosening or wear that could compromise the oiling system.
Sealing Surface and Gasket Quality
The sealing surface and the included gasket are the primary defenses against oil leaks. A machined or precisely molded sealing face helps the gasket seat evenly, which is especially important on repeated service cycles when gaskets compress and age.
Assess the type and thickness of the gasket material and whether the housing accepts standard replacement gaskets or seals. Higher-quality gasket materials and a well-finished sealing surface will typically reduce the risk of seepage and make future maintenance more straightforward.
Material Strength and Resistance to Cracking
Housings are exposed to engine heat, oil, and mechanical stress, so material choice influences longevity. Metal housings and reinforced composites can offer different balances of weight, thermal expansion, and impact resistance.
Look for materials specified to withstand heat cycling and oil exposure without becoming brittle. A housing that resists cracking reduces the chance of sudden failures that can lead to rapid oil loss and engine damage.
Serviceability and Access
Consider how easy it is to access the housing and perform routine oil filter changes. Housings with convenient fastener locations and filter elements that are simple to remove can save time and reduce the likelihood of improper reassembly.
Service-friendly features also include clear torque specs for mounting bolts and designs that minimize interference with nearby hoses or components. A housing that makes maintenance simpler lowers the risk of installation errors that might cause leaks.
Compatibility with Standard Filter Elements
Some housings accept common, readily available filter cartridges while others require specialty elements. Compatibility with standard elements makes sourcing replacements easier and helps keep maintenance predictable over the vehicle's life.
Confirm that the housing supports the filter type recommended for the engine and that the housing's internal sealing for the filter element is robust, preventing bypass or improper oil flow during operation.
Durability Under Thermal and Chemical Stress
The housing must endure repeated temperature changes and exposure to engine oil and contaminants. Thermal expansion can affect sealing integrity, while long-term oil exposure can degrade certain plastics or seal compounds.
Choose a housing specified to resist heat cycling and chemical degradation. Durable construction reduces the chance of gradual failures such as warping, seal hardening, or thread damage that complicates later service and increase leak risk.
FAQ
What are the common symptoms of a failing oil filter housing?
Common signs include visible oil leaks around the housing, a drop in oil pressure, or warning lights related to oil pressure. You may also notice oil pooling under the vehicle after it sits. These symptoms often depend on the leak location and severity and should be investigated promptly to avoid engine damage.
Can I replace just the gasket or seal instead of the entire housing?
Often a failed gasket or seal can be replaced without swapping the entire housing, especially if the housing is undamaged and mounts correctly. However, if the housing shows signs of cracking, warping, or damaged mounting surfaces, replacing the whole housing is usually the safer option.
How do I know if a housing is cracking or just leaking at the gasket?
Inspect the housing closely for hairline fractures, stress marks, or oil tracks that originate away from the sealing face. Leaks at the gasket typically show oil concentrated at the seal interface, while cracks may produce oil seepage along a different path. Cleaning the area and then running the engine briefly can help locate the source.
Does replacing the oil filter housing require special tools?
Most replacements require standard hand tools such as sockets, torque wrenches, and possibly a seal puller. Some housings use specialized fasteners or require specific torque settings, so having a service manual or manufacturer torque specs is helpful. In tight engine bays, you may need extensions or universal joints for access.
What should I check after installing a new oil filter housing?
After installation, verify bolt torque to the specified values, install the correct gasket or seal, refill and check oil level, then run the engine and inspect for leaks. Recheck torque and oil level after a short test drive or a few heat cycles to ensure the seal has seated properly and there is no seepage.
How We Chose the Best Hyundai Elantra Oil Filter Housing
We prioritized housings that match Hyundai Elantra factory mounting points and oil gallery connections to ensure proper fit and function. Key evaluation criteria included precision of fitment, quality of sealing surfaces and gaskets, material strength and resistance to cracking, and compatibility with standard oil filter cartridges. We also considered how easy the housing is to service during routine oil changes, including accessibility of mounting fasteners and the filter element. Long-term durability factors such as resistance to heat cycling and oil exposure were examined, along with user reports related to leaks and seal failures. Exclusions included housings that required vehicle modifications, adapters, or did not clearly specify Hyundai Elantra fitment. We also excluded units with unclear material specifications or repeated reports of early cracking or persistent leaks. The resulting list focuses on housings that balance correct fit, reliable sealing, and practical serviceability.
Our full evaluation process is outlined in our review methodology.
Conclusion
When selecting a Hyundai Elantra oil filter housing, prioritize correct fitment and a high-quality sealing surface to minimize leak risk. Balance material durability and serviceability so the housing both lasts and makes routine oil changes straightforward. Expect tradeoffs between lightweight materials and long-term toughness, and focus on housings that clearly match the Elantra mounting points, accept standard filter elements, and use robust gaskets or seals. That approach reduces the chance of repeat visits and helps keep the engine properly lubricated.
Explore More:
- Check out all Hyundai Elantra parts & accessories
- Explore Engine
- Browse all Auto Parts
