Note: This article contains affiliate links. If you click on these links and make a purchase, I may earn a small commission at no extra cost to you. This helps support my research and content. Read my full affiliate disclosure here.
If you want a lower center of gravity and crisper handling on your 2018-2024 Toyota Camry, the right set of lowering springs makes a tangible difference. You will gain better body control in corners, reduced nose dive under braking, and a more aggressive stance without the complexity of full suspension swaps. That said, not every spring is a good match for daily-driven Camrys, so fitment, spring rate, and ride quality matter more than raw drop numbers.This guide covers our shortlisted top options for this model range and outlines the practical tradeoffs between comfort, handling, and installation. We evaluate each choice by drop height, ride comfort, durability, and fitment specifics for the 2018-2024 Toyota Camry to help you pick the right springs for your driving priorities.
Looking for other parts? See all Toyota Camry parts & accessories.
Top Picks at a Glance
| Best Overall The best all-around choice for most situations | Godspeed Traction-S Performance Lowering Springs for Toyota Camry (XV70) 2018-21 |  |
| Best Quality Built to a higher standard if you want something more solid | Godspeed Traction-S Performance Lowering Springs for Toyota Camry (XV70) 2018–2021 | |
| Best Value The sweet spot between price and what you get | DAZZLAIT TH-18CAMRY Lowering Coil Springs Set for 2018-2025 Camry |  |
| Best Budget The cheapest option that still gets the job done reliably | maXpeedingrods Lowering Springs for Toyota Camry 2018–2024 |  |
| Highest Rated A top-rated pick with lots of positive feedback | D2 Racing Sports D2 PRO Lowering Springs for 2018+ Camry |  |
| Most Popular A crowd favorite that many people choose with confidence | Toyota TRD Lowering Springs (PTR07-02140) |  |
Godspeed Traction-S Performance Lowering Springs for Toyota Camry (XV70) 2018-21
| Compatible Models | Toyota Camry L/LE/I4 XLE (XV70) 2018-2021 |
|---|---|
| Avg. Drop (Front/Rear) | 1.6 Inch / 1.6 Inch |
| Spring Rate (Front/Rear) | 3.92 kg/mm / 3.25 kg/mm |
| Material | SAE 9254 spring wire |
These Godspeed Traction-S lowering springs replace the factory coils on compatible Camry 4-cylinder trims to lower the car about 1.6 inches front and rear and sharpen handling. Cold-wound SAE 9254 wire with multi heat treatment and powder-coat finish aim to resist sagging and corrosion, and the springs are designed to work with the factory shocks though they pair better with high-performance dampers if you push handling limits. In everyday use they tighten turn-in and reduce body roll without making the ride excessively harsh for most drivers, improving cornering and the car's stance. Installation requires standard suspension work and alignment afterwards; because they are a drop-only spring set, ride feel depends heavily on your shock condition and wheel/tire setup. Some owners report a softer-than-expected ride while others praise the balance between comfort and response, so expectations should be realistic for a mid-range aftermarket spring. These are a practical choice if you want a visible drop and crisper handling without a fully track-focused setup.
Best for: Practical owners who want a noticeable but daily-drivable drop and crisper handling without committing to a full coilover setup; they value improved cornering and appearance while keeping comfort in mind.
Less Ideal for: Drivers seeking extreme track performance or the firmest possible ride should look at dedicated coilovers and matched dampers; owners of excluded Camry trims should choose a product specific to their configuration.
- Designed to lower the Camry ~1.6 inches front and rear for improved aesthetics and center-of-gravity benefits
- Cold-wound SAE 9254 spring wire with heat treatment for better tensile strength and resistance to sagging
- Powder-coat finish helps protect against corrosion in normal driving conditions
- Engineered to work with factory shocks while offering better results with upgraded dampers
- Set is spring-only so final ride quality depends on shock condition and may require upgraded dampers for aggressive driving
- Compatibility excludes Hybrid, SE, XSE, and V6 trims so fitment is limited to specified 4-cylinder Camry versions
Verdict: If you want a balanced, street-friendly drop and sharper handling for a 2018–2021 Camry 4-cylinder, these springs deliver visible stance and improved response without sacrificing daily comfort.
Godspeed Traction-S Performance Lowering Springs for Toyota Camry (XV70) 2018–2021
| Compatible models | Toyota Camry SE/XSE/V6 XLE (XV70) 2018-2021 |
|---|---|
| Average drop (F/R) | 1.6 Inch / 1.6 Inch |
| Spring rate (F/R) | 4.20 kg/mm / 2.82 kg/mm |
| Material | SAE 9254 spring wire |
These Godspeed Traction-S lowering springs are built to drop a 2018–2021 Camry about 1.6 inches front and rear and tighten up handling for more responsive turn-in and reduced body roll. Cold-wound SAE 9254 spring wire and multi-step heat treatment are intended to keep spring rates consistent and resist sagging over time. The springs are powder coated to help resist corrosion and are designed to be used with factory shocks, though they will pair better with higher-performance dampers if you want sharper control. In everyday driving they aim to retain a comfortable daily ride height and avoid frequent bottoming-out, while delivering a firmer, sportier feel on corners and highway transitions. Installation typically replaces all four springs and is a straightforward suspension refresh for someone upgrading handling; however, expect a firmer ride and slightly less compliance over rough roads compared with stock suspension. These springs improve appearance as well as cornering behavior but will not change damping characteristics on their own.
Best for: Drivers seeking sharper handling and a lower, sportier stance for a 2018–2021 Camry who prioritize on-road performance and improved cornering feel over plush ride comfort.
Less Ideal for: Buyers who want a softer, cushioned daily ride or who plan no other suspension upgrades for severe-road comfort should consider a different solution.
- Engineered spring steel and heat treatment for resistance to premature sagging
- Moderate and even drop front and rear for balanced stance and handling
- Powder coat finish provides corrosion protection
- Designed to work with factory shocks while benefiting from upgraded dampers
- Won’t change damping so shocks may need upgrade for best performance
- Firmer ride quality compared with stock suspension may reduce comfort on rough roads
Verdict: A performance-focused lowering spring set that tightens handling and gives a balanced lowered stance for 2018–2021 Camry drivers wanting sportier on-road dynamics.
DAZZLAIT TH-18CAMRY Lowering Coil Springs Set for 2018-2025 Camry
| Fitment | 2018-2025 Toyota Camry |
|---|---|
| Manufacturer | DAZZLAIT |
| Material Process | SAE 9254 wire, heat treated, cold-wound |
| Finish | Powder coat |
These DAZZLAIT lowering springs are a budget-friendly option for Camry owners who want a firmer, lower stance without replacing the rest of the suspension. The kit is designed to drop the front and rear ride height roughly 1.5 inches and increase spring rate progressively to resist bottoming during compression. In practice they are used as a direct replacement of factory springs to lower the center of gravity, which can improve turn-in and reduce body roll for street and light track use. The springs are cold-wound from SAE 9254 wire with heat treatment and a powder coat to guard against corrosion. Expect a firmer ride compared with factory springs and potential slight front/rear drop discrepancies that may require corner balancing or adjustable dampers to fine-tune. Installation is straightforward for a shop or experienced DIYer but alignment after fitment is required. These springs prioritize handling and appearance over a plush ride, so they suit drivers who want measurable handling gains on a daily-driven Camry.
Best for: Buyers who want a practical, cost-effective handling upgrade and a lower stance for daily-driven Camrys while accepting a firmer ride and may tune suspension afterward.
Less Ideal for: Drivers who prioritize a soft, comfort-oriented ride or those unwilling to perform alignment and suspension setup after installation.
- Lowers vehicle center of gravity to improve cornering and reduce body roll
- Progressive spring design increases rate during compression to help prevent bottoming out
- Powder-coated finish and heat-treated SAE 9254 wire for corrosion resistance and durability
- Designed specifically to fit 2018–2025 Toyota Camry for direct replacement installation
- Firmer ride quality compared with factory springs which may reduce ride comfort
- Reported uneven front/rear drop that can require additional setup or alignment
Verdict: A budget-minded lowering spring kit that tightens Camry handling and improves stance for drivers focused on sportier on-road performance.
maXpeedingrods Lowering Springs for Toyota Camry 2018–2024
| Fitment | Toyota Camry 2018-2024 FWD |
|---|---|
| Drop length | 2.0 inches |
| Material | SAE 9254 cold-wound steel |
| Durability tests | 200,000-cycle fatigue; 720-hour salt spray |
These maXpeedingrods lowering springs are a budget-focused option for lowering and tightening the handling of front-wheel-drive Toyota Camry models from 2018 to 2024. Made from SAE 9254 cold-wound steel with an anti-corrosion coating and powder finish, the springs are intended to give around a 2 inch drop (actual drop may vary by trim and engine) and are tested for fatigue and salt-spray durability. They install as direct replacements and are compatible with factory and most aftermarket shocks, so a typical install replaces the springs on the struts and reuses existing mounts. In use the springs reduce body roll and lower the center of gravity for a firmer, more controlled feel, though ride quality is slightly stiffer compared with factory springs and there can be initial settling noise. The product offers a solid-looking finish and durability testing at a price point that makes a visible stance and handling upgrade accessible, but expect a firmer ride and plan for professional spring compression if you are not experienced with suspension work.
Best for: Buyers looking to change the Camry's stance and sharpen handling on a limited budget who prioritize visible lowering and improved cornering over a plush ride.
Less Ideal for: Drivers who prioritize a soft, comfort-oriented ride or who want a guaranteed exact drop without variation should consider alternative suspension options.
- Direct bolt-on design works with factory and many aftermarket shocks for straightforward installation
- Cold-wound SAE 9254 steel and anti-corrosion coating with powder finish for durability in wet and salty conditions
- Tested for 200,000-cycle fatigue and 720-hour salt spray which supports long-term reliability
- Designed to lower vehicle center of gravity to improve cornering stability and reduce body roll
- Ride becomes noticeably firmer compared with factory springs, which may reduce comfort on rough roads
- Actual drop can vary by engine and trim so you may not get an even 2 inch reduction on all Camry configurations
Verdict: A cost-effective lowering spring kit that gives Camry owners a sportier stance and improved handling without a large investment.
D2 Racing Sports D2 PRO Lowering Springs for 2018+ Camry
| Material | Chrome Silicon Steel |
|---|---|
| Manufacturing Process | Cold-wound and heat-treated |
| Spring Design | Progressive-rate coils |
| Fitment | Direct factory replacement |
The D2 PRO lowering springs are a direct-fit replacement aimed at drivers who want a lower center of gravity and firmer handling without swapping to coilovers. Made from high-tensile chrome silicon steel with cold-wound, heat-treated construction and a durable finish, these springs use a progressive coil rate to reduce body roll and tighten cornering while preserving a street-friendly ride. Installation is typical of drop-in springs and keeps factory mounting points, so a standard spring swap and alignment will return the car to safe steering geometry. D2 highlights bench testing, ISO 9001 manufacturing, and TÜV approval, which supports a reliability-focused purchase. Expect improved road response and a sportier stance, but not the adjustability or extreme stiffness of coilovers. For drivers prioritizing long-term consistency, the corrosion-resistant finish and tested spring rates are practical benefits, though final ride height and comfort will vary with wheel, tire, and alignment choices.
Best for: Buyers who want a reliable, long-lasting lowering solution that sharpens handling while keeping daily comfort and minimizing ongoing adjustments.
Less Ideal for: Drivers seeking adjustable ride height or track-focused, highly stiff suspension should consider coilovers or adjustable systems instead.
- Progressive-rate design balances handling improvements with everyday ride comfort
- Cold-wound, heat-treated chrome silicon steel construction for consistent spring rates
- Durable surface finish improves corrosion resistance for long service life
- Direct-fit replacement that uses factory mounting points for straightforward installation
- Non-adjustable height so fine-tuning ride height requires different suspension components
Verdict: Choose these springs if you want a tested, durable lowering kit that improves Camry handling while maintaining everyday ride quality.
Toyota TRD Lowering Springs (PTR07-02140)
| Manufacturer | Toyota |
|---|---|
| Model | PTR07-02140 |
| Exterior | Machined |
| Item Weight | 18.16 pounds |
These genuine Toyota TRD lowering springs are a factory-quality replacement set intended to lower the vehicle slightly while sharpening handling. Installed in place of the factory springs, they provide a modest drop that tightens body roll and improves turn-in without introducing harshness or clearance problems for typical street use. Because they are Toyota-manufactured parts, fitment and finish match factory expectations and they install cleanly when using standard suspension tools or dealer installation. The springs produce a subtle visual lowering and firmer ride that many buyers find gives a sportier stance without radical ride changes. Limitations include the fixed drop height and the fact that springs alone do not address damping, so pairing with stock shocks can change ride feel and tire wear depending on condition of existing struts. These are best chosen by buyers seeking a conservative, reliable lowering solution from the factory brand rather than an aggressive aftermarket stance option.
Best for: Buyers who prioritize proven, factory-brand upgrades and want social reassurance from established parts when lowering a Camry for improved handling and appearance.
Less Ideal for: Drivers seeking an aggressive drop, adjustable ride height, or a full performance suspension package should consider aftermarket kits that include matched shocks and adjustable components.
- Genuine Toyota/TRD manufacturing for factory-quality fit and finish
- Modest drop that improves handling and reduces body roll without major clearance issues
- Designed to install with standard suspension tools and dealer-ready fitment
- Fixed lowering amount with no adjustability to tune ride height or stiffness
Verdict: Choose these TRD lowering springs when you want a conservative, factory-made lowering kit that improves handling and appearance with reliable fitment.
Choosing the Right 2018-2024 Toyota Camry Lowering Springs: Key Factors to Consider
Drop Height and Visual Goals
How much the springs lower the car affects both appearance and handling. A modest drop (often 1.0–1.5 inches) improves stance and reduces center of gravity without compromising ground clearance for driveways and speed bumps. Larger drops can look more aggressive and reduce body roll further but increase the risk of scraping and can change suspension geometry.
When choosing for the Camry, think about your typical routes. If you encounter steep driveways or frequent parking lot curbs, prioritize conservative drop heights to avoid rubbing and undercarriage contact. Also consider that larger drops may necessitate additional alignment work or bump-stop changes to maintain suspension travel and ride compliance.
Spring Rate and Ride Comfort
Spring rate determines how firm the suspension feels and how it reacts to bumps and cornering loads. Higher rates yield sharper turn-in and reduced body roll, but they transmit more road imperfections to the cabin. Lower rates preserve comfort but may allow more unwanted body motion during spirited driving.
For the Camry, a balanced spring rate that offers improved handling without turning the ride harsh is usually preferable. If you mainly commute and occasionally drive enthusiastically, choose springs with progressive or moderate rates that smooth small bumps while still supporting better control at the limit.
Compatibility With Stock Shocks
Lowering springs change suspension travel and load characteristics, and shocks tuned for stock springs may not perform optimally after lowering. Some springs are designed to work with factory dampers while others pair better with upgraded shocks or struts. Mismatched damping can cause excessive bounce, poor rebound control, or premature wear on components.
For a 2018-2024 Camry, confirm whether the springs are intended for use with original equipment dampers. If not, budget for compatible damping upgrades to retain predictable handling and avoid accelerated shock degradation.
Ride Height Consistency and Settling
Not all lowering springs settle to their advertised drop immediately; some compress further after a few thousand miles. Consistency of ride height over time affects alignment and handling predictability. Progressive springs typically settle less abruptly and can provide a more linear feel as they compress under different loads.
When planning modifications for a Camry, consider a spring that offers stable long-term height and predictable settling behavior. That reduces the need for frequent alignment checks and helps preserve tire wear patterns.
Durability and Corrosion Protection
Lowering springs endure constant stress and exposure to weather and road salts. Protective coatings, high-quality steel, and consistent manufacturing processes reduce the chance of premature failure or rust. Corrosion can accelerate material fatigue and change spring geometry over time.
Select springs with robust finishes and reputable manufacturing standards for the Camry to ensure longevity. This is particularly important in regions with winter road treatments or near-coastal environments where salt exposure is a factor.
Installation Complexity and Alignment Needs
Installing lowering springs typically requires spring compressors, proper torqueing of suspension fasteners, and a full alignment afterward. Some installations are straightforward on a lift, while others require additional tools or time due to tight clearances. Incorrect installation can lead to noise, premature wear, or unsafe handling.
Plan for post-installation alignment and an inspection of related components such as sway bar links and strut mounts on the Camry. If you prefer a lower-cost install route, choose springs noted for straightforward bolt-in fitment that work with stock hardware.
How Much Lowering Is Right for a Camry
Choosing the right drop for your Camry balances stance goals with everyday practicality. For most owners, a 1.0 to 1.5 inch front and rear drop yields a visually appealing stance and improved handling without making daily driving difficult. This range maintains usable ground clearance while reducing the car's center of gravity.
If you want a track-focused feel, slightly larger drops can tighten handling but expect increased risk of scraping and a greater likelihood that suspension geometry will require correction. Consider your ground clearance needs and whether you are prepared to accept tradeoffs in comfort and practicality.
- 1.0–1.5 inches: Sweet spot for daily-driven Camrys
- 1.5–2.0 inches: More aggressive look, potential clearance issues
- Over 2.0 inches: Typically requires additional suspension modifications
Progressive Versus Linear Spring Rates
Progressive springs change rate as they compress, providing a softer initial response for comfort and stiffer behavior under heavier loads. That makes them attractive for owners who want a comfortable daily ride with occasional spirited driving.
Linear-rate springs deliver a consistent feel through travel and can offer more predictable handling for performance-oriented setups. On a Camry used mostly for commuting, progressive rates often provide the best compromise between comfort and control.
- Progressive: Softer over small bumps, firmer in heavy cornering
- Linear: Consistent response, preferred for track-focused setups
Common Installation Considerations
Lowering springs require correct tools and procedures. Installers should compress springs safely, torque suspension fasteners to factory specs, and check for interference with brake lines and sway bar links. After installation, a full four-wheel alignment is essential to correct camber and toe changes caused by the altered ride height.
Also inspect related components during installation. If strut mounts, sway bar end links, or control arm bushings are worn, replacing them at the same time avoids transferring new loads onto old parts and improves long-term results.
- Use proper spring compressors and follow safety guidelines
- Always perform a four-wheel alignment after lowering
- Check and refresh worn suspension hardware during install
Effect on Tire Wear and Alignment
Lowering changes suspension geometry, often increasing negative camber and altering toe settings. Without a proper alignment tailored to the lowered height, you may see accelerated or uneven tire wear. Corrected alignment settings help maintain even contact patches and predictable steering response.
Regularly monitor tire wear patterns after installing springs and plan for alignment checks after the initial settling period. That ensures the Camry maintains safe handling characteristics and extends tire life.
- Expect camber and toe adjustments at alignment
- Recheck alignment after the first few hundred miles to catch settling
- Rotate tires more frequently if wear patterns change
When to Consider Upgrading Dampers
If the lowered Camry feels floaty, bouncy, or stops under control feel degraded, the stock dampers may not be damping correctly for the new spring rates. Upgraded shocks or valved struts help control rebound and compression, restoring composure and improving handling precision.
Match damper valving to the springs' target use. Softer valving favors comfort, while firmer valving supports aggressive driving. For many Camry owners, damper upgrades are not required for a mild drop, but are recommended for more significant lowering or performance-focused builds.
- Stock dampers may suffice for modest drops
- Upgrade dampers for larger drops or track use
- Choose valving to match comfort versus performance priorities
Still looking for the perfect fit?
Select your Toyota Camry configuration to see the most relevant Lowering Springs recommendations
How We Chose the Best 2018-2024 Toyota Camry Lowering Springs
We focused exclusively on components suited to the 2018-2024 Toyota Camry and applied specific, vehicle-relevant criteria to narrow the field. First, fitment accuracy: we prioritized springs engineered for the Camry chassis and suspension geometry to avoid unintended handling issues. Second, drop height and spring rate: candidates were evaluated for the drop they provide and how the spring rate balances sporty control with daily comfort. Third, ride quality reports: we assessed verified owner feedback and technical specifications to judge real-world comfort on typical road surfaces. Fourth, build quality and corrosion resistance: materials, coating, and manufacturing processes that extend service life on passenger cars were considered. Fifth, installation and compatibility: we considered whether the springs work with stock shocks or require additional damping upgrades.We excluded springs designed for racing-only applications, full coilover kits, and options lacking clear Camry fitment documentation. The final selections represent well-documented choices that suit common use cases from daily driving to spirited backroad use, while minimizing required complementary modifications.
Our full evaluation process is outlined in our review methodology.
FAQ
How much do lowering springs lower a 2018-2024 Camry?
Typical lowering springs for this Camry range provide about 1.0 to 2.0 inches of drop depending on the kit. The most common and practical drops fall around 1.0–1.5 inches to balance appearance and clearance.
Will lowering springs affect daily ride comfort?
Yes. Lowering springs often increase spring rates, which makes the ride firmer. Progressive-rate springs can mitigate harshness for daily driving, while stiffer linear springs will feel sportier but less comfortable on rough roads.
Do I need new shocks when I install lowering springs on a Camry?
Not always. For modest drops, factory dampers may perform adequately. However, if the springs have significantly higher rates or a larger drop, matching dampers is recommended to maintain control and prevent premature wear of the shocks.
How does lowering affect alignment and tire wear on this Camry?
Lowering typically alters camber and toe, so a four-wheel alignment is necessary after installation. Without proper alignment, uneven tire wear and altered steering characteristics can occur.
Are progressive lowering springs better for daily-driven Camry owners?
Often they are a strong choice because they combine compliance over small bumps with firmer support under load. That provides a comfortable everyday ride while still improving handling when you push the car.
What installation steps should I expect when fitting lowering springs?
Expect a procedure that includes safely compressing springs, torquing suspension fasteners to spec, and performing a full alignment afterward. It is also wise to inspect related components like strut mounts and sway bar links during the job.
Final Verdict
Choosing lowering springs for a 2018-2024 Toyota Camry is about balancing visual goals, handling gains, and daily practicality. Prioritize realistic drop heights that suit your driving environment, and match spring rate choices to how you use the car. Also consider whether your stock dampers will handle the new spring rates or if a damping upgrade is warranted.Focus on fitment accuracy, durable construction, and predictable ride height. With those priorities in mind you can pick a spring that sharpens handling and improves stance while retaining a comfortable, reliable daily-driving experience.
Explore More:
- Check out all Toyota Camry parts & accessories
- Explore Lowering Springs Maintenance & Repair Guides
- Explore Suspension & Steering
- Browse all Auto Parts
