Note: This article contains affiliate links. If you click on these links and make a purchase, I may earn a small commission at no extra cost to you. This helps support my research and content. Read my full affiliate disclosure here.
If your Ford Edge is showing rough idling, intermittent misfires, or difficulty starting, swapping a faulty ignition coil can often fix those driveability issues. Choosing the right Ford Edge ignition coil matters because the correct fit and consistent electrical output affect ignition timing, fuel economy, and long-term engine health. This guide shortlists the top options for this vehicle and focuses on fitment, coil output consistency, and durability under typical driving conditions. Read on to see which coils made the cut and learn the main factors we considered when evaluating each pick.
Looking for other parts? See all Ford Edge parts & accessories.
Top Picks at a Glance
| Best Reviewed A top-rated pick with lots of positive feedback | LCWRGS Set of 4 Ignition Coil Packs for 2.0L Ford Edge (2012–2018) |  |
| Most Popular A crowd favorite that many people choose with confidence | TRQ 6-Piece Ignition Coil Set (direct-fit) |  |
| Best Quality Built to a higher standard if you want something more solid | ENA Set of 6 Ignition Coils and Iridium Spark Plugs for 3.5L Turbo EcoBoost |  |
| Best Budget The cheapest option that still gets the job done reliably | ECCPP Ignition Coil Pack Set (6) — Replacement for Ford Edge/Flex/Fusion/Mustang/Taurus and Lincoln models |  |
| Most Sold A high-volume bestseller chosen again and again | NPAUTO UF553 DG520 Ignition Coil Pack Kit, Pack of 6 |  |
| Best Value for Money The sweet spot between price and what you get | X4XZ UF670 Ignition Coil and LTR6BHX Double Iridium Spark Plug Kit |  |
| Best Overall The best all-around choice for most situations | LCWRGS Set of 6 Ignition Coil Packs and Spark Plugs for 3.5/3.7L V6 Ford (2008–2016) |  |
1. LCWRGS Set of 4 Ignition Coil Packs for 2.0L Ford Edge (2012–2018)
| Fitment | Ford Edge 2.0L 2012-2018 |
|---|---|
| Package | Set of 4 ignition coil packs |
| Installation Type | Coil pack |
| OEM Part Numbers | UF670, DG546, 5C1873, C1816, 6736203, CM5Z12029A |
These LCWRGS ignition coil packs are a direct-fit replacement aimed at restoring reliable spark delivery for the 2.0L Ford Edge (2012–2018). Sold as a set of four, they plug into the factory harness and replace common part numbers such as UF670 and DG546. The manufacturer states construction using highly conductive copper windings and high-dielectric epoxy for longer service life and improved connectivity, and the listing claims about 15% more energy than the original coil for firmer ignition and fewer misfires. In practice this part is used when a failed coil causes misfires, rough idle, or a check engine light; swapping all four avoids uneven performance between cylinders. Install is straightforward for anyone with basic hand tools and limited engine access because these are vehicle-specific fit. Important limitations: this is an aftermarket replacement so long-term durability can vary compared with factory-brand parts, and replacing coils alone may not fix problems caused by worn spark plugs, wiring, or fuel/engine issues. For reliability-focused maintenance on a Ford Edge, these offer a practical, factory-style swap with good real-world feedback from users.
Best for: Reliability-focused Ford Edge owners who prioritize restoring consistent engine operation and avoiding intermittent misfires through a direct-fit, vehicle-specific coil replacement.
Less Ideal for: Owners seeking an OEM-brand part with an extended verified lifespan or those troubleshooting ignition-like symptoms caused by spark plugs, fuel, or engine mechanical issues rather than coils.
- Vehicle-specific fit for 2.0L Ford Edge 2012–2018 reduces fitment hassles
- Sold as a complete set of four to replace all coils at once and prevent uneven cylinder performance
- Manufacturer cites enhanced conductive copper windings and high-dielectric epoxy for improved connectivity
- Compatible with common factory part numbers (UF670, DG546, C1816) for straightforward cross-referencing
- Aftermarket part so long-term durability may not match factory-brand coils
- Claims of higher energy output are manufacturer-stated and may vary by vehicle and conditions
Verdict A practical, vehicle-specific four-pack replacement that restores ignition reliability on 2.0L Ford Edge models without complex installation, though it is an aftermarket option rather than a factory-branded coil.
2. TRQ 6-Piece Ignition Coil Set (direct-fit)
| Kit quantity | 6 Ignition Coils |
|---|---|
| Connector Gender | Male-to-Female |
| Installation Type | Professional Installation |
| Automotive Fit Type | Vehicle Specific Fit |
This TRQ six-piece ignition coil set replaces all coils on a Ford Edge to restore smooth running and eliminate misfires. It is sold as a direct-fit, pre-assembled kit intended for straightforward replacement of worn factory coils, so typical use is swapping the old coils one-for-one during scheduled maintenance or when diagnostic trouble codes point to ignition failures. The kit highlights a rubber/silicone or phenolic resin shell to reduce premature boot wear and an application-specific design that requires no modifications. In practice you get a complete set that simplifies installation and helps ensure consistent spark across cylinders, which can improve idle quality, throttle response, and drivability. Some owners report excellent longevity and factory-quality fit, while others have experienced early failures or connector fitment issues on certain vehicles, so results can vary. Professional installation is recommended if you are not comfortable with ignition work, and bear in mind that aftermarket coils sometimes differ slightly from factory units in thermal behavior and connector clearance.
Best for: Convenience-driven buyers who prioritize an easy, all-in-one replacement that gets a Ford Edge back to reliable running without searching for individual parts or modifications.
Less Ideal for: Buyers who expect OEM lifetime durability or who need custom high-performance coils should consider higher-end or vehicle-specific performance options instead.
- Complete six-coil kit covers all cylinders for one maintenance job
- Direct-fit, pre-assembled parts intended to install without modifications
- Boots use rubber/silicone or phenolic resin to help resist premature wear
- Manufacturer resources include DIY installation videos to guide replacement
- Some users report early failures on a minority of units
- Connector locking tabs may not seat cleanly on every harness design
Verdict A practical, ready-made six-coil replacement that simplifies restoring a Ford Edge's ignition performance, though longevity can vary between units.
3. ENA Set of 6 Ignition Coils and Iridium Spark Plugs for 3.5L Turbo EcoBoost
| Vehicle Service Type | Car |
|---|---|
| Connector Gender | Female-to-Male |
| Installation Type | Plug In |
| Voltage | 12V |
| Terminal Quantity | 3 |
This kit pairs six plug-and-play ignition coils with six iridium spark plugs intended for 3.5L turbo EcoBoost engines that use the UF646-style 3-pin connector. Installation is straightforward on turbocharged engines with accessible coil packs; the coils are bolt-on and locate on the valve cover while the plugs come pre-gapped to 0.039 inches. For a Ford Edge with the 3.5L EcoBoost, this set will restore lost spark, clear misfires, and can improve throttle response and fuel burn compared with worn components. Buyers will appreciate the complete set approach when replacing multiple cylinders at once and the factory-style connector for direct fit. Important limitations: this kit fits turbo 3-pin coils only and will not work on naturally aspirated or 2-pin variants, so verifying the connector type is essential before purchasing. Aftermarket longevity can vary compared with factory-brand parts, so expect mixed lifespan reports across users.
Best for: Performance-oriented buyers who prioritize restoring top-end power and smooth multi-cylinder operation on a 3.5L EcoBoost Edge and prefer replacing the entire ignition set at once.
Less Ideal for: Owners with non-turbo or 2-pin ignition setups on their Edge or those who prefer OEM-brand coils for proven long-term durability should look elsewhere.
- Complete set replaces all six coils and plugs at once for consistent performance across cylinders
- Plug-and-play 3-pin connector and bolt-on mount simplify installation on turbo EcoBoost engines
- Iridium spark plugs arrive pre-gapped for immediate use and better longevity than standard plugs
- Designed to address misfires and restore throttle response and fuel efficiency
- Compatible only with turbo 3-pin coil applications and will not fit 2-pin or non-turbo engines
- Aftermarket quality and long-term durability may not match factory-brand parts
Verdict A convenient, performance-focused full set for 3.5L EcoBoost Edges with 3-pin turbo coils that restores spark and drivability but is limited to turbo 3-pin applications.
4. ECCPP Ignition Coil Pack Set (6) — Replacement for Ford Edge/Flex/Fusion/Mustang/Taurus and Lincoln models
| Voltage | 12 Volts |
|---|---|
| Installation Type | Bolt-On |
| Connector Gender | Male |
| Automotive Fit Type | Vehicle Specific Fit |
This ECCPP kit supplies six ignition coils intended to replace factory coils on compatible Ford and Lincoln V6 engines. Buyers typically use the set when addressing misfires, rough idle, or an illuminated check engine light; installing all six at once is convenient for older vehicles or when swapping out multiple failing coils. The product is marketed as a direct replacement built to factory-style specifications, runs at 12 volts, and ships as a vehicle-specific fit intended for bolt-on installation. The practical benefits are straightforward: a full set reduces diagnostic uncertainty and avoids mixing new and old coils, and many users report easy installation and immediate improvement in drivability. Limitations to expect are variable long-term durability across installs and occasional reports of early failure on some vehicles, which means more cautious owners might prefer a well-known OEM or premium aftermarket brand for critical long-term reliability. Verify exact fitment against your vehicle before ordering to avoid fit mistakes.
Best for: Budget-conscious buyers who want a complete, low-cost replacement to fix misfires or rough idle on Ford Edge-family V6 engines without paying dealer prices.
Less Ideal for: Owners seeking longest-term reliability or extended warranties who would rather pay for a branded premium coil should consider higher-end alternatives.
- Full set of six coils simplifies replacement for V6 engines and avoids mixing old and new units
- Designed as vehicle-specific, bolt-on replacements to match factory fit and connector gender
- Many buyers report straightforward installation and immediate improvement in idle and misfire symptoms
- Aftermarket brand quality can be inconsistent with some reports of premature failures
- Not a branded premium coil so long-term durability is less certain than higher-end replacements
Verdict A cost-conscious way to replace all six coils and restore drivability on compatible Ford/Lincoln V6s, but expect variable long-term durability compared with premium options.
5. NPAUTO UF553 DG520 Ignition Coil Pack Kit, Pack of 6
| Fitment | 3.5L and 3.7L V6 Ford vehicles (vehicle specific fit) |
|---|---|
| Package | 6 ignition coils |
| Installation Type | Bolt-On |
| Connector Gender | Male |
This NPAUTO coil pack kit supplies six replacement ignition coils intended for naturally aspirated V6 3.5L and 3.7L Ford engines. It is used to fix misfires, rough idle, and loss of power by replacing failed coils across all six cylinders, and buyers typically install the set when doing a full-coil refresh or when diagnosing recurrent misfires. The listing highlights vehicle-specific fitment for many Ford V6 applications and includes common interchange part numbers so you can match it to the factory part. In practice the coils offer a direct bolt-on installation but some engines require intake removal which adds labor. Owners report improved idle and restored performance after installation, though a minority experienced early failures or damage to the coil tip during removal. The kit is a cost-effective aftermarket alternative to factory replacements, but results depend on correct fit and careful installation to avoid connector or tip damage.
Best for: Risk-averse mainstream buyers who prioritize restoring reliable day-to-day drivability on a Ford Edge and prefer replacing the entire coil set rather than swapping single units.
Less Ideal for: Buyers who want the longest possible factory-backed lifespan or who prefer dealer-sourced parts with direct manufacturer warranty coverage should consider alternatives.
- Full kit of six coils covers all cylinders for a complete replacement
- Vehicle-specific fitment for Ford 3.5L and 3.7L V6 engines simplifies matching to the Edge
- Direct bolt-on design intended to restore misfire-free operation and smooth idle
- Includes common interchange part numbers to help confirm compatibility
- Some users reported premature failure on individual coils within months of installation
- Removal can be difficult on certain engines and one user reported the coil tip separating during extraction
Verdict A budget-friendly complete coil pack kit for Ford V6 engines that can quickly restore drivability if fitted and installed carefully, but occasional early failures have been reported.
6. X4XZ UF670 Ignition Coil and LTR6BHX Double Iridium Spark Plug Kit
| Brand | X4XZ |
|---|---|
| Connector Gender | female |
| Installation Type | Screw-In |
| Automotive Fit Type | Vehicle Specific Fit |
This kit pairs four ignition coil packs with four double-iridium spark plugs to replace failing coils and plugs on compatible Ford engines. It is used as a direct swap when diagnosing misfires, rough idle, hard starting, or reduced fuel economy; you remove the old coils and plugs and install these plug-and-play replacements. Notable features include double-iridium electrodes for longer spark life and a thermoplastic coil connector with an internal ferrite suppressor to reduce radio frequency interference. In practice the kit restores smoother idling, crisper throttle response, and can improve fuel consumption when worn parts are the issue. Installation is straightforward for a home mechanic with basic tools and the complete four-pack saves time compared with buying parts separately. Potential limitations are typical of aftermarket kits: fit and longevity can vary by vehicle and one-off reports of a defective coil mean it is wise to bench-test components before final reassembly. The kit does not include an instruction manual so beginners should reference a repair guide or seek professional help for first-time installations.
Best for: Buyers who value convenience and want a one-stop replacement bundle to quickly restore drivability without sourcing individual parts; ideal for owners who prefer doing a single full-ignition service in one visit to the garage or at-home session.
Less Ideal for: Buyers seeking a factory-branded, dealer-sourced part or those who prefer professional installation only should consider dealership parts or service alternatives instead.
- Complete kit with four coils and four spark plugs for a full tune-up in one purchase
- Double iridium spark plugs designed for longer service life and consistent spark
- Thermoplastic coil connector and ferrite noise suppressor reduce electrical interference
- Plug-and-play design intended for vehicle-specific fit to simplify installation
- No printed installation instructions included
- Aftermarket components can vary in longevity compared with factory parts
Verdict A convenient all-in-one coil and iridium plug kit that makes a full ignition refresh simple for owners wanting a fast, do-it-once solution for Ford Edge tune-ups.
7. LCWRGS Set of 6 Ignition Coil Packs and Spark Plugs for 3.5/3.7L V6 Ford (2008–2016)
| Fitment | 2008–2016 Ford 3.5L/3.7L V6 applications |
|---|---|
| Package | Set of 6 ignition coils and spark plugs |
| Installation Type | Screw-In |
| Connector Gender | Female |
This kit provides six direct-fit ignition coil packs and matching spark plugs intended for Ford 3.5L and 3.7L V6 engines used in Edge, Taurus, Flex and several Lincoln models from 2008–2016. It is designed as a full replacement set, so you swap all six coils and plugs in one job to eliminate misfires, rough idle, and poor fuel economy caused by worn ignition components. The product claims enhanced conductivity and higher energy output than factory coils, which in real-world use should improve throttle response and stabilize idle. Installation is straightforward for a competent DIYer, though accessing the rear cylinders may require intake removal on some engines which adds labor time. The kit includes vehicle-specific connectors and screw-in plugs to match factory fitment. Keep in mind this is an aftermarket kit, so while many buyers report reliable fit and resolved check-engine lights, longevity may vary compared with dealer parts and some users choose OEM plugs while using the supplied coils.
Best for: A balanced all-round buyer who wants a single, vehicle-specific kit to restore ignition performance without hunting parts across multiple orders; ideal for owners comfortable doing a full six-cylinder replacement to solve misfires and improve drivability.
Less Ideal for: Drivers who prefer dealer-sourced parts for maximum long-term reliability or those who only want to replace a single failed coil should consider buying individual factory-quality components instead.
- Complete six-cylinder kit covers all coils and spark plugs in one purchase
- Direct-fit design for Ford 3.5L/3.7L V6 applications simplifies installation
- Manufacturer claims higher energy output and improved conductivity versus factory coils
- Multiple buyers report resolved misfires and smoother idle after installation
- Rear cylinders can be difficult to access and may require intake removal increasing install time
- Aftermarket components may not match OEM longevity in every case
Verdict A convenient, vehicle-specific six-pack that restores V6 ignition performance for a practical, DIY-minded buyer who wants a full replacement in one purchase.
Choosing the Right Ford Edge Ignition Coil: Key Factors to Consider
Exact Fitment and Compatibility
Correct fitment is the foundation for a successful ignition coil replacement. An ignition coil that matches the Ford Edge engine mount points and electrical connector prevents installation issues, poor electrical contact, and vibration-induced failures. Using a coil specified for your engine ensures the terminal layout and housing shape align with the ignition system and spark plug orientation. Mismatched fit can lead to stress on wiring, heat-soak problems, or difficulty seating the coil over the spark plug, all of which can cause intermittent misfires or additional component wear. Verify year and engine code compatibility before purchasing to minimize installation time and avoid returns.
Electrical Output and Resistance Specs
The coil’s electrical characteristics determine spark energy and consistency. Key specs include primary and secondary resistance and the coil’s ability to generate adequate secondary voltage for reliable spark under load. A coil with unstable or inappropriate resistance values can cause weak sparks, misfires, reduced fuel efficiency, and rough idling. For Ford Edge applications, choose coils that match OEM or documented specifications so the ignition control module can properly manage timing and dwell. When specs are available, they provide a useful benchmark for technicians diagnosing ignition-related faults.
Build Quality and Thermal Durability
Ignition coils operate in high-heat engine bays and must resist thermal degradation and oil exposure. Materials, potting compounds, and housing design influence longevity. Better-sealed coils limit moisture ingress and oil contamination that can create internal shorts or degrade insulation. Heat-resistant components reduce the chance of coil winding breakdown over time. For drivers in hotter climates or for engines with higher under-hood temperatures, prioritizing coils with proven thermal durability lowers the likelihood of premature failure. Durable construction also helps maintain consistent spark performance over the life of the part.
Connector and Boot Quality
The electrical connector and spark-plug boot are critical interfaces that affect signal transfer and spark delivery. A secure connector reduces the risk of intermittent contact or arcing, while a well-designed boot provides electrical insulation and a reliable seal around the spark plug. Boots that resist cracking and maintain elasticity with heat cycles help prevent misfires caused by poor insulation. Choose coils with boots and connectors designed to withstand repeated installation and removal without deforming. Good contact geometry also makes testing and troubleshooting simpler for mechanics.
Reliability and Warranty
Long-term reliability matters because ignition coil failures can be sporadic and costly in terms of time and effort. Look for products with solid warranty terms and a history of consistent field performance. Warranties provide a measure of manufacturer confidence and offer protection if a defect appears soon after installation. Field reliability also reflects manufacturing quality control and materials selection. When evaluating options, weigh warranty length alongside reported longevity and common failure modes to judge expected service life.
Ease of Installation and Serviceability
Ease of installation reduces labor time and the chance of installation errors. Coils that are straightforward to remove and reinstall, with accessible fasteners and clear connector release tabs, make both DIY and professional swaps simpler. Serviceable features such as replaceable boots or clear alignment tabs help ensure correct seating during installation. Consider how the coil is mounted in your Ford Edge engine bay and whether reaching the coil requires special tools. Easier installations lower the barrier for routine maintenance and make troubleshooting faster when diagnosing ignition issues.
FAQ
How do I know if my Ford Edge ignition coil is failing?
Common signs often include rough idling, engine misfires under load, difficulty starting, or a sudden drop in fuel economy. You may also notice a check engine light with misfire-related diagnostic trouble codes. Symptoms can vary, so combine visual inspection for cracked boots or corrosion with electrical testing for more confidence.
Can I test an ignition coil myself on a Ford Edge?
Yes, basic testing is possible with a multimeter to check primary and secondary resistance against published specifications. A scope or specialized ignition tester provides more definitive insight into coil waveform and spark energy. If you are unsure, have a technician confirm results to avoid misdiagnosis because ignition issues can stem from multiple system components.
Should I replace all ignition coils at once on my Ford Edge?
Often drivers replace only the failed coil, especially when replacement is straightforward. However, if your vehicle has high mileage or multiple coils show wear, replacing several at once can prevent staggered failures and additional labor down the road. Consider condition, age, and how long you plan to keep the vehicle when deciding.
Do ignition coil symptoms always mean the coil is bad?
Not always. Similar symptoms can be caused by bad spark plugs, faulty wiring, fuel delivery problems, or an ignition control module issue. Use a combination of visual checks, electrical testing, and diagnostic codes to narrow the cause before swapping parts.
Is installing an ignition coil on a Ford Edge a DIY-friendly task?
Many ignition coil replacements are straightforward and suitable for DIYers with basic hand tools and mechanical familiarity. Access can vary by engine layout, so factor in required clearance and whether special tools are needed. Follow proper safety steps and torque guidelines when reinstalling to avoid damage.
How We Chose the Best Ford Edge Ignition Coil
To build this list we focused on the attributes that matter most for Ford Edge ignition coil replacements. Key evaluation criteria included exact vehicle fitment across model years and engine types, measured or specified secondary voltage and coil resistance values, build quality and material durability to resist heat and oil exposure, and electrical connector reliability to ensure a solid signal path. We also considered warranty coverage and reported field reliability from technicians and vehicle owners, plus ease of installation for DIY-minded drivers. We excluded units lacking clear fitment information or missing basic electrical specifications. Parts meant for generic or multi-vehicle use without Ford Edge-specific references were omitted. The aim was to highlight coils that offer correct fit, stable electrical performance, and durability in real-world driving conditions.
Our full evaluation process is outlined in our review methodology.
Conclusion
When choosing a Ford Edge ignition coil, prioritize exact fitment and electrical specifications so the part integrates cleanly with the vehicle’s ignition control system. Pay attention to build quality, connector and boot durability, and warranty support to reduce the chance of repeat failures. Balancing reliability, thermal resilience, and ease of installation will help you pick a coil that restores smooth starts and consistent engine performance while minimizing future maintenance headaches.
Explore More:
- Check out all Ford Edge parts & accessories
- Explore Engine
- Browse all Auto Parts
