Note: This article contains affiliate links. If you click on these links and make a purchase, I may earn a small commission at no extra cost to you. This helps support my research and content. Read my full affiliate disclaimer here.
Picking the right fuel injector for a Nissan Maxima matters because it affects throttle response, idle quality, and overall engine smoothness. If you drive regularly or rely on consistent performance, a mismatched or low-quality injector can cause hesitation, poor fuel delivery, or check-engine lights. This guide covers the top shortlisted options for Nissan Maxima fuel injectors and explains the evaluation criteria used to narrow the field. You will get practical information on fitment, flow performance, and durability to help you decide which injector type fits your needs. Read on for the picks and the factors that guided our selection.
Looking for other parts? See all Nissan Maxima parts & accessories.
Top Picks at a Glance
| Best Reviewed A top-rated pick with lots of positive feedback | X AUTOHAUX Fuel Injector Set (4) — Replacement for Nissan 16600-5L300 |  |
| Most Popular A crowd favorite that many people choose with confidence | Pjvmvo FBJC100 Fuel Injector Set (Set of 6) — Direct‑Fit Replacement for Nissan/Infiniti 3.0L–3.5L V6 (2001–2004) |  |
| Best Quality Built to a higher standard if you want something more solid | BuyAutoParts Fuel Injector for Nissan/Infiniti SR20DE VG30DE (oval connector) |  |
| Best Budget The cheapest option that still gets the job done reliably | Partuto 4-Pack Fuel Injectors for Nissan Sentra/Maxima (Fitment for Maxima A33 2.0L V6 2000–2003) |  |
| Most Sold A high-volume bestseller chosen again and again | BLUE ELF Fuel Injector Set (6) for Nissan Maxima / Infiniti I30 |  |
| Best Value for Money The sweet spot between price and what you get | GPMMWPG Fuel Injector Set 16600-JK20A — Set of 6 |  |
| Best Overall The best all-around choice for most situations | SZKAIDAG Premium Replacement Fuel Injectors (0280158005) – Set of 6 |  |
1. X AUTOHAUX Fuel Injector Set (4) — Replacement for Nissan 16600-5L300
| OE number | 16600-5L300, FBJB100, 800-1701N, FJ274, 155-0353 |
|---|---|
| Voltage | DC 12V |
| Pin Number | 2 |
| Orifice Type | 4 Holes Disc |
These X AUTOHAUX fuel injectors are sold as a set of four intended to replace worn injectors on compatible Nissan engines. Each injector is a high-impedance design that the listing says matches the original coil resistance and flow rate, and they arrive with O-rings preinstalled for straightforward installation by a qualified mechanic. In practice they are used to restore consistent fuel delivery, improve cold start response, and normalize air/fuel mixture when worn injectors cause rough idle or reduced fuel economy. The metal and plastic construction promises durability, and the four-hole disc orifice pattern should produce an even spray for better atomization. Important limitations: these are aftermarket parts and require proper installation and engine tuning to ensure correct operation, and the seller recommends a mechanic with a factory service manual. Also confirm exact fitment to your Nissan Maxima before ordering since fit and connector type must match the vehicle. For buyers focused on getting a reliable replacement set that mimics factory flow characteristics, these provide a practical option as long as installation and tuning needs are addressed.
Best for: Reliability-focused buyers who prioritize restoring factory-like fuel delivery and consistent engine behavior rather than aftermarket performance upgrades.
Less Ideal for: Buyers seeking performance injectors with higher flow rates or plug-and-play parts that require no post-install tuning should consider other options.
- Sold as a set of four for complete bank replacement
- High-impedance coils matched to stated OEM resistance for compatible operation
- Preinstalled O-rings simplify installation and reduce small-parts risk
- Four-hole disc orifice intended to provide even fuel atomization
- Aftermarket part so may require tuning after installation to restore optimal performance
- Installation should be done by an experienced mechanic with proper tools and service information
Verdict A practical, reliability-oriented four-pack replacement that matches stated OEM flow and impedance but requires professional installation and possible tuning.
2. Pjvmvo FBJC100 Fuel Injector Set (Set of 6) — Direct‑Fit Replacement for Nissan/Infiniti 3.0L–3.5L V6 (2001–2004)
| Brand | Pjvmvo |
|---|---|
| Item model number | FBJC100 |
| Manufacturer Part Number | EYFJC100 |
| Compatible engines/years | Nissan/Infiniti 3.0L–3.5L V6, 2001–2004 |
These Pjvmvo FBJC100 injectors are a direct-fit replacement kit sold as a set of six for Nissan and Infiniti 3.0L–3.5L V6 engines from the 2001–2004 model years. They arrive pre-tested, flow-matched and include O-rings and gaskets to simplify installation, so mechanics and DIYers can swap the injectors without major fuel-system modifications. The listing reports OEM-equivalent duty cycle and pulse width so the injectors should work with the factory fuel maps and maintain throttle response and idle quality. Practical benefits include matched flow for balanced cylinders, included seals to avoid extra parts hunting, and compatibility with factory connectors for plug-and-play fitment. Limitations are typical of aftermarket injectors: long-term durability may vary compared with factory-brand units, and buyers should verify exact fitment for their Maxima engine before installation. Also the listing focuses on fitment for specific V6 engines and years, so it is not a universal solution for other vehicles.
Best for: Convenience-focused owners who want a straightforward, full-bank replacement that restores factory-like fuel delivery with minimal fuss and parts-sourcing hassle.
Less Ideal for: Drivers seeking a long-term OEM-brand warranty or high-end performance injectors for modified engines should consider OEM replacements or performance-specific units instead.
- Sold as a complete set of six for full-bank replacement to ensure matched flow across cylinders.
- Flow tested and balanced at the factory to reduce cylinder imbalance and rough idle after installation.
- Includes O-rings and gaskets to simplify installation and avoid separate purchases.
- Built to maintain OEM duty cycle and pulse width for plug-and-play compatibility with factory fuel management.
- Long-term durability may not match factory-brand injectors in high-mileage or performance applications.
- Fitment is limited to specific 2001–2004 Nissan and Infiniti V6 engines so verification is required before purchase.
Verdict A convenient, plug-and-play six-injector kit aimed at restoring factory fuel metering on 2001–2004 Nissan/Infiniti 3.0L–3.5L V6 engines, with included seals and flow-matching to simplify installation.
3. BuyAutoParts Fuel Injector for Nissan/Infiniti SR20DE VG30DE (oval connector)
| Brand | BUYAUTOPARTS! |
|---|---|
| Model | Fuel Injector |
| Manufacturer Part Number | 35-01326AN |
| OEM Part Number | 13501326-101 13501326-102 13501326-103 1660010Y00 16600-10Y00 1660010Y01 16600-10Y01 166001P102 1660053F00 1660053F01 1660053J00 |
This BuyAutoParts fuel injector is a direct replacement for select Nissan SR20DE 4-cylinder and VG30DE V6 engines and is sold individually so you can replace a single failed injector or swap the set over time. It is engineered and manufactured to industry quality standards and ships ready to install with an OE-style oval electrical connector for a straightforward plug-and-play fit when matched to correct part numbers. In use the injector restores proper fuel delivery to a cylinder, improving idle quality and throttle response compared with a leaking or clogged unit. Practical benefits include eliminating the need for core returns and a one-year unlimited-mileage warranty for peace of mind. Important limitations are that this listing is for one injector only so cost adds up if you need all cylinder injectors, and correct fitment depends on matching OEM part numbers to your Maxima model year and engine variant before purchase.
Best for: Performance-oriented owners who prioritize restoring accurate fuel delivery and throttle response on a Nissan Maxima and prefer a high-quality aftermarket replacement that mirrors factory operation.
Less Ideal for: Buyers looking for a multi-injector kit or a bundled set for full-engine replacement should consider options sold in multi-packs to simplify installation and cost planning.
- Designed to match factory-style electrical connector for straightforward installation when the OEM part number matches
- Manufactured to ISO/TS 16949-quality standards and sold as brand new with no core required
- Backed by a one year unlimited-mileage warranty for added confidence
- Single-unit availability lets you replace only the failed injector without immediate full-bank replacement
- Sold individually so replacing all cylinders requires multiple purchases
- Fitment requires verifying OEM part numbers against your vehicle to ensure compatibility
Verdict A high-quality, factory-style replacement injector ideal for performance-focused Maxima owners needing a single-cylinder fix, but sold one at a time so factor in quantity for full-engine service.
4. Partuto 4-Pack Fuel Injectors for Nissan Sentra/Maxima (Fitment for Maxima A33 2.0L V6 2000–2003)
| Voltage | DC 12V |
|---|---|
| Pin Number | 2 |
| Orifice Type | 4 Holes Disc |
| OE Numbers | 16600-5L300, FBJB100, 800-1701N, FJ274, 155-0353 |
These Partuto fuel injectors are an economical replacement intended to match the factory coil resistance and fuel flow characteristics for the 2000–2003 Nissan Maxima A33 2.0L V6. Sold as a set of four, they use a 2-pin electrical connector, preinstalled O-rings, and a four-hole disc orifice to produce the spray pattern specified for this application. Installation requires lifting the fuel rail and swapping injectors one by one; the listing recommends a professional mechanic and a tune or calibration check after fitting because new injectors can change air/fuel mixture. In practical use they provide a direct-fit replacement option when original injectors are worn, with materials listed as metal and plastic and a DC 12V high-impedance coil for cold-start performance. Limitations are typical for budget aftermarket parts: they are not factory replacement parts, detailed performance verification beyond matching resistance and flow is limited, and buyers should confirm fitment for the Maxima A33 and inspect for leaks after installation.
Best for: Budget-conscious Nissan Maxima A33 owners who prioritize an affordable, direct-fit injector replacement and are comfortable arranging professional installation or tuning.
Less Ideal for: Owners seeking factory-quality, long-term OE-level parts or those who want components with extensive independent test validation should consider higher-end or OEM replacements.
- Sold as a complete four-pack for replacing all injectors at once
- High-impedance coils matched to OEM resistance for cold-start reliability
- Preinstalled O-rings simplify installation and reduce leak risk
- Four-hole disc orifice aimed to replicate factory spray pattern
- Aftermarket part so long-term durability and exact factory equivalence are not guaranteed
- Product description advises professional installation and potential tuning after fitment
Verdict A cost-focused direct-replacement injector set for 2000–2003 Nissan Maxima A33 V6 owners who need an affordable swap but are willing to have installation and tuning handled professionally.
5. BLUE ELF Fuel Injector Set (6) for Nissan Maxima / Infiniti I30
| Material | Metal, Plastic |
|---|---|
| Inlet Connection Type | O-ring face seal |
| Outlet Connection Type | O-ring face seal |
| Number of Ports | 12 |
This BLUE ELF kit supplies six fuel injectors intended as direct replacements for compatible Nissan Maxima and Infiniti I30 engines. Installed in place of the factory injectors, they restore fuel delivery across all cylinders and are intended for routine repair or engine refresh jobs. The injectors use metal and composite plastic construction with preinstalled O-ring face seals and internal seal rings to reduce sticking and improve durability in service. Practical benefits include a full-bank kit so you replace all injectors at once and parts that match common OEM part numbers for straightforward fitment when the correct part is confirmed. Limitations to note are that this is an aftermarket unit rather than a factory-branded injector and buyer verification of part number fitment is essential because multiple interchange numbers are listed. Expect typical installation to require basic fuel system care and standard tools or professional installation if you prefer a shop to handle fuel-rail work.
Best for: A risk-averse mainstream buyer who wants a complete replace-all-injectors solution to restore fuel delivery on older Nissan Maxima or Infiniti I30 engines and prefers readily available, tested aftermarket options.
Less Ideal for: Drivers seeking a factory-branded or performance-tuned injector or anyone unwilling to verify interchange numbers should consider other sources or OEM replacements.
- Full six-injector kit covers all cylinders for a consistent replacement job
- Preinstalled O-ring face seals simplify installation and reduce leak points
- Internal seal rings designed to resist fuel exposure and reduce sticking
- Lists multiple OEM interchange part numbers to help confirm fitment
- Aftermarket part rather than factory-branded injector which may vary from dealership units
- Requires careful part-number verification to ensure vehicle compatibility
Verdict A complete aftermarket six-injector replacement that offers an affordable, ready-to-install option for restoring fuel delivery on compatible Nissan Maxima and Infiniti I30 engines if you verify part-number fit.
6. GPMMWPG Fuel Injector Set 16600-JK20A — Set of 6
| Model | 16600-JK20A |
|---|---|
| Quantity | Set of 6 |
| Compatible Engine | 3.5L V6 |
| Brand | GPMMWPG |
This GPMMWPG six-piece fuel injector set is a direct-fit replacement designed for Nissan Maxima 3.5L applications and similar 3.5L engines. The injectors come with pre-installed seals and factory-style electrical connectors, which makes swapping out worn units straightforward for a DIYer or tech familiar with the Maxima intake. In use they aim to restore proper fuel atomization to cure rough idle, hesitation, and poor throttle response; several buyers report smoother acceleration and improved drivability after installation. The construction is described as corrosion-resistant with machined exterior components, which should hold up in the engine bay environment. Limitations to note are that longevity is not yet proven compared with long-established factory suppliers, and you should verify part reference 16600-JK20A for exact fit before purchasing. Also professional tuning or injector flow testing may be needed if you replace only some injectors to avoid imbalance. For a budget-focused replacement that restores function and fitment on Maxima 3.5L engines, this set offers solid practical value.
Best for: Practical optimizers looking for a cost-effective, plug-and-play replacement that restores drivability on a Nissan Maxima 3.5L without unnecessary premium features.
Less Ideal for: Those who prioritize factory-brand longevity or need guaranteed long-term warranty support should consider established OEM suppliers or professionally remanufactured injectors instead.
- Direct OEM-style fit and factory-compatible electrical connectors for straightforward installation on Maxima 3.5L engines.
- Includes pre-installed seals to reduce leak risk and shorten installation time.
- Reported to improve idle quality and throttle response by restoring proper fuel atomization.
- Machined exterior and corrosion-resistant materials aimed at durability in the engine bay.
- Long-term durability and flow consistency are less established compared with major OEM injector brands.
- May require flow matching or professional balancing if replacing only some injectors to prevent cylinder imbalance.
Verdict A budget-friendly, direct-fit six-injector replacement that restores performance and fitment on 3.5L Nissan Maxima engines while offering good short-term value.
7. SZKAIDAG Premium Replacement Fuel Injectors (0280158005) – Set of 6
| Compatible engines | 3.5L V6 Nissan applications (listed fitments) |
|---|---|
| Quantity | Set of 6 |
| Part cross-reference | 0280158005 / 842-12297 |
These SZKAIDAG injectors are a direct-fit replacement set for Nissan 3.5L V6 models and supply all six injectors needed when swapping a whole bank. They are used to restore even fuel delivery after worn or leaking injectors cause misfires, rough idle, or reduced fuel economy. The listing cites stainless steel internal parts and factory-fit dimensions to resist corrosion and match original connections, so installation is straightforward with standard fuel-rail and electrical connectors. In practice the injectors should smooth out idle and recover lost power and mileage when the originals are compromised. Important limitations are typical of aftermarket injectors: long-term durability is unproven compared with factory parts and thorough calibration or cleaning may be required if fuel quality has caused deposits. Also replacing the whole set is recommended rather than swapping a single unit to keep cylinder fueling balanced. For a balanced, budget-conscious buyer this set offers a practical way to refresh an aging Maxima fuel system without complex tuning.
Best for: Balanced all-round buyers looking for an affordable, practical way to restore a 3.5L V6 Nissan Maxima's drivability and fuel economy without extensive tuning or modification.
Less Ideal for: Buyers seeking guaranteed long-term OEM-level lifespan or those who want performance-tuned injectors calibrated for modified engines should consider other options.
- Complete set of six for bank replacement so all cylinders are matched
- Direct-fit design with factory-style connectors for straightforward installation
- Stainless steel internal components aimed at improved corrosion resistance
- Manufacturer claims aim for balanced fuel delivery to restore idle smoothness and performance
- Long-term durability compared with factory replacements is not established
- May require cleaning or replacement of related fuel-system parts if deposits or contamination are present
Verdict A cost-effective full-set replacement that restores balanced fueling for Nissan 3.5L V6 engines, with a practical fit-and-forget appeal for mainstream owners.
Choosing the Right Nissan Maxima Fuel Injector: Key Factors to Consider
Fitment and Connector Compatibility
Correct physical fit is the baseline requirement for any injector installed on a Nissan Maxima. The mounting geometry, fuel rail port size, and electrical connector type must match the vehicle’s original equipment to avoid leaks, poor seating, or unreliable electrical contact.
If an injector requires adapter parts or changed wiring, installation complexity rises and the chance of future failures increases. Confirming factory-style O-ring diameters and rail alignment reduces installation time and helps maintain a proper seal under pressure.
Flow Rate and Consistency
Flow rate determines how much fuel the injector delivers at a given pulse width. For a Nissan Maxima, matching the injector flow to the engine’s fueling requirements preserves air-fuel balance across operating conditions and helps prevent lean or rich running.
Consistent flow between cylinders is equally important. Significant variation can lead to uneven cylinder output, rough idle, and increased emissions. Look for injectors with documented flow tolerances and testing data that show minimal deviation among units in a set.
Spray Pattern and Atomization
The way fuel is dispersed into the intake port or combustion chamber affects how well it mixes with air. Good atomization and an appropriate spray pattern promote even combustion, smoother throttle response, and improved cold-start behavior in a Nissan Maxima.
Different engines and intake geometries respond better to specific spray shapes. Prioritizing injectors with suitable spray characteristics for port injection applications helps maintain combustion stability and reduce deposits over time.
Electrical Characteristics and Impedance
Injector electrical specs such as impedance and coil resistance determine compatibility with the vehicle’s wiring and driver circuits. Low-impedance injectors may draw more current and can cause issues if the ECU or wiring is not rated for them.
Matching the injector’s electrical profile ensures reliable operation, prevents heat buildup in wiring, and avoids triggering fault codes. Check that the connector type and terminal layout match the Nissan Maxima harness for a trouble-free installation.
Seal Materials and Durability
Seals and O-rings are the first parts to fail under thermal cycling and chemical exposure. For a Nissan Maxima, using injectors with high-quality, fuel-resistant seals reduces the chance of leaks and vapor intrusion into the intake.
Durable construction and corrosion-resistant materials for the injector body and internal components extend service life. Consider injectors that specify compatibility with common fuel formulations and that use elastomers rated for prolonged exposure to fuel and heat.
Serviceability and Support
Ease of maintenance and availability of replacement components matter if you plan to keep the vehicle long term. Serviceable features include replaceable filters or screens and clear guidance for routine inspection or cleaning.
Good documentation, accessible technical specifications, and vendor support make diagnosis and future repairs simpler, reducing downtime and the likelihood of unnecessary component replacement.
FAQ
How do I know if my Nissan Maxima needs new fuel injectors?
Common signs include rough idling, hesitation during acceleration, poor cold starts, or an illuminated check-engine light with fuel-related codes. Symptoms often overlap with other systems, so diagnosis usually involves fuel system pressure checks and injector electrical testing. Cleaning or testing injectors can help pinpoint whether replacement is necessary.
Can I replace individual injectors or should I replace the whole set on a Nissan Maxima?
Replacing the entire set is often recommended when injectors show uneven wear or flow variation, because matched flow rates promote balanced cylinder operation. However, if only one injector has failed and tests show the others are within spec, replacing a single unit can be acceptable provided the new injector matches flow and spray characteristics.
Is fuel injector cleaning effective for restoring performance?
Cleaning can restore spray patterns and remove deposits that impair atomization, and it often improves performance when clogging is mild to moderate. Effectiveness depends on the type and severity of deposits. Professional flow-bench cleaning yields better, measurable results than some at-home methods, but badly degraded injectors may still require replacement.
Do aftermarket injectors require ECU tuning on a Nissan Maxima?
It depends on how the aftermarket injector’s flow and electrical characteristics differ from the original. If flow rates or pulse response differ significantly, the engine management system may need recalibration to maintain proper fuel delivery. Minor differences that fall within factory tolerances often do not require tuning.
What maintenance helps extend injector life in a Nissan Maxima?
Using quality fuel, replacing fuel filters at recommended intervals, and periodic professional cleaning can reduce deposit buildup and stress on injector components. Also inspect O-rings and seals during routine service to catch leaks early, and address any fuel system issues promptly to avoid accelerated wear.
How We Chose the Best Nissan Maxima Fuel Injector
To assemble this list of Nissan Maxima fuel injectors we applied focused, vehicle-specific filters and technical checks to ensure compatibility and dependable operation. Primary evaluation criteria included fitment accuracy to the Nissan Maxima intake and rail connections, measured flow rate consistency across injectors, and the injector spray pattern or atomization quality relevant to the engine’s fuel-air mixing. Durability and materials were assessed with emphasis on corrosion resistance and seal longevity under typical engine temperatures and fuel types. We also considered electrical connector compatibility and impedance specs so the injectors work with stock wiring and ECU signals. We excluded any items lacking explicit compatibility data for the Nissan Maxima or those without clear flow specifications. Units with ambiguous connector types, undocumented flow variance, or poor reported seal materials were not considered. The final shortlist emphasizes mechanical fit, hydraulic performance, electrical compatibility, and long-term sealing durability.
Our full evaluation process is outlined in our review methodology.
Conclusion
When choosing fuel injectors for a Nissan Maxima, prioritize correct physical fit and flow characteristics that match the engine’s fueling needs. Pay attention to spray pattern, electrical compatibility, and seal materials because these attributes directly affect drivability, emissions, and long-term reliability. Balance the desire for long-term durability with ease of installation and serviceability. Where possible, choose injectors with documented flow specs and compatible connectors to minimize installation issues and maintain consistent cylinder-to-cylinder performance.
Explore More:
- Check out all Nissan Maxima parts & accessories
- Explore Fuel System
- Browse all Auto Parts
