Note: This article contains affiliate links. If you click on these links and make a purchase, I may earn a small commission at no extra cost to you. This helps support my research and content. Read my full affiliate disclosure here.
Choosing the right engine mount for your Volkswagen Atlas matters because the mount affects cabin vibration, drivetrain alignment, and long-term component wear. A poor choice can lead to increased noise, uneven engine movement, and premature stress on related parts.This guide shortlists the top options for the Atlas and explains the criteria we used, including fitment precision, material quality, and durability. Read on to understand which mounts made the list and why they are strong candidates for typical repair or upgrade scenarios.
Looking for other parts? See all Volkswagen Atlas parts & accessories.
Top Picks at a Glance
1. JTHKLAP Engine and Transmission Mount Kit, 4-Piece for VW Atlas/Atlas Cross Sport/Teramont 3.6L V6
| Compatible vehicles | VW Atlas 2018-2023, Atlas Cross Sport 2020-2023, Teramont 2019/2022 with 3.6L V6 (automatic) |
|---|---|
| Pieces included | 4-piece kit |
| Replaces part numbers | 3QF199262G, 5Q0198037A, 5QA199555F |
This 4-piece mount kit replaces the engine and transmission mounts on Volkswagen Atlas, Atlas Cross Sport, and Teramont models with the 3.6L V6 automatic transmission. The kit includes a hydraulic right engine mount, a hydraulic left transmission mount, and upper and lower rear engine bushings to restore factory-style support. In use it absorbs vibration, stabilizes the powertrain, and helps maintain consistent engine response under load, which improves cabin refinement and reduces stress on driveline components. The parts are described as high-grade and quality tested, and the kit is sold to match specific factory part numbers for straightforward swap-in fitment. Expect a practical improvement in NVH and a return to factory ride feel after installation, though professional installation or alignment checks are recommended because mounting work affects driveline geometry and can be labor intensive. This is a good replacement when the originals show wear or hydraulic mounts have lost damping ability.
Best for: Balanced owners focused on restoring factory ride and reducing vibration who want a full replacement kit that returns drivability and refinement to daily-driving Atlas or Teramont V6 vehicles.
Less Ideal for: Drivers looking for a budget temporary fix or for performance-tuned setups that require stiffer aftermarket mounts should consider other options.
- Complete 4-piece set covers engine and transmission mounting points for a full replacement job
- Hydraulic mounts restore factory-style damping to reduce vibration and improve cabin comfort
- Sold to match specific Volkswagen part numbers for direct-fit installation
- High-grade materials and claimed quality testing for improved durability over worn originals
- Installation can be labor intensive and may require professional service or alignment checks
- No vehicle-specific installation hardware or instructions included in the listing
Verdict: A complete, factory‑matched 4-piece mount kit that restores factory damping and reduces vibration for Atlas and Teramont 3.6L V6 owners.
2. Tivora 4-Piece Engine and Transmission Mount Kit for VW Atlas V6 3.6L
| Set Name | Tivora 4-Piece Engine & Transmission Mount Set |
|---|---|
| Included Components | 4PCS Engine Mounts & Transmission Mount |
| Material Type | Heavy-Duty High-Strength Metal, Oil Resistant Rubber |
| Finish Types | Powder Coated |
This Tivora 4-piece mount kit replaces the engine and transmission mounts on select VW Atlas and Atlas Cross Sport V6 3.6L models and is intended to restore factory-like stability and damping. The kit includes left and right hydraulic mounts plus upper and lower torque arm bushings and is made from high-strength metal with oil-resistant rubber to handle heat and road loads. In practice it reduces vibration and engine movement, quiets drivetrain noise, and keeps power delivery smooth under acceleration because the hydraulic elements absorb shock. The parts are powder coated for corrosion resistance and the seller notes tight dimensional tolerances for a bolt-in fit, which can make DIY replacement straightforward for a competent home mechanic. Expect longer service life compared with standard aftermarket kits, but bear in mind compatibility is limited to specific model years and automatic transmissions only, so confirm part numbers before buying.
Best for: Performance-oriented owners who prioritize restoring firm, factory-quality engine control and reduced vibration for spirited driving on VW Atlas V6 3.6L models.
Less Ideal for: Buyers seeking a universal or multi-vehicle kit or those unwilling to verify part numbers and model-year compatibility should consider other options.
- Made from heavy-duty high-strength metal and oil-resistant rubber for durability and heat resistance
- Hydraulic mounts and torque arm bushings reduce vibration and drivetrain noise for smoother power delivery
- Powder coated finish improves corrosion resistance for longer service life
- Designed with tight dimensional tolerances for a precise, bolt-in fit intended to simplify DIY installation
- Fitment is restricted to specific VW Atlas/Atlas Cross Sport/Teramont V6 3.6L model years and automatic transmissions only
- No manufacturer-backed warranty information is listed in the product details
Verdict: A durable, precisely made 4-piece mount kit built to restore firm, low-vibration engine mounting on specified VW Atlas V6 3.6L models.
3. Felievy Engine/Transmission Mount Replacement for 2018-2023 Volkswagen Atlas 3.6L FS1 4Motion (Replaces 3QF199555C)
| Compatible vehicle | 2018-2023 Volkswagen Atlas 3.6L FS1 4Motion (CA1, CA2, CA3) |
|---|---|
| Replaces part | 3QF199555C |
| Material | Aluminum, Iron |
| Mounting type | Screw Installation |
This Felievy replacement mount is a bolt-on engine/transmission mount specified for the 2018–2023 Volkswagen Atlas with the 3.6L FS1 4Motion engine and replaces part number 3QF199555C. It is constructed from iron and aluminum to withstand under-hood stresses and uses the factory mounting points for a straightforward screw installation when handled by a competent tech. In use it isolates engine movement, which reduces vibration and cabin noise and restores the firmer, more controlled feel you expect after a worn mount is removed. The unit is presented as a direct replacement, so it avoids modification and keeps engine alignment and driveline geometry intact. Practical buyers will appreciate the simple swap-in nature and the corrosion-resistant materials, though the part is sold as a single mount and professional installation is recommended to ensure correct torque and safety. This product targets owners seeking a budget-conscious but vehicle-specific replacement rather than an upgraded performance or adjustable solution.
Best for: Practical optimizers who want a vehicle-specific, budget-conscious replacement that restores factory fit and reduces NVH without paying for performance upgrades.
Less Ideal for: Drivers looking for performance-tuned or adjustable mounts, or those who prefer a full multi-mount replacement kit rather than a single piece.
- Direct-fit design that replaces factory part 3QF199555C for a simple bolt-on installation
- Aluminum and iron construction for durability and improved resistance to corrosion
- Specifically matched to 2018–2023 VW Atlas 3.6L FS1 4Motion to preserve engine alignment
- Designed to reduce engine vibration and cabin noise for a smoother driving feel
- Sold as a single mount rather than a complete set which may require purchasing additional mounts
- Manufacturer recommends professional installation which adds labor cost and complexity
Verdict: A vehicle-specific, value-oriented replacement mount that restores factory fit and reduces vibration for the VW Atlas 3.6L FS1 4Motion.
4. Roneeson Front Right Engine Motor Mount for Volkswagen Atlas 3.6L (2018-2023)
| Brand Name | Roneeson |
|---|---|
| Manufacturer Part Number | 3QF199262G |
| Included Components | Engine Motor Mount |
| Fitment | Volkswagen Atlas 2018-2023, Atlas Cross Sport 2020-2023 3.6L |
This Roneeson front right engine motor mount is a single-unit, vehicle-specific replacement for the Volkswagen Atlas and Atlas Cross Sport with the 3.6L engine. It installs in place of the factory mount to isolate engine vibration and hold the engine securely under normal driving loads. Typical use is straightforward mechanical replacement when an original mount becomes worn, cracked, or begins to transmit excessive vibration to the cabin. The product lists vehicle fitment for 2018 to 2023 Atlas models and ships as one engine motor mount, which simplifies ordering for a targeted repair. Practical benefits include restoring smoother idling and reducing drivetrain movement without the expense of a full OEM-priced assembly. The main limitations are that it is sold as a single mount so buyers replacing multiple mounts must purchase additional units, and compatibility is limited to the specified Atlas 3.6L models only. Installation may require basic mechanical tools or a shop for safe engine support during swap.
Best for: Budget-conscious owners seeking an affordable, direct-fit replacement to restore normal engine isolation on a Volkswagen Atlas 3.6L without paying OEM prices.
Less Ideal for: Drivers who want a multi-piece kit or are performing a complete mount overhaul in one service should consider buying multiple units or a full set from another source.
- Vehicle-specific fit for Volkswagen Atlas and Atlas Cross Sport 3.6L (2018–2023)
- Sold as a single replacement part for targeted repairs
- Restores engine stability and reduces cabin vibration when installed
- Lower-cost alternative to higher-priced factory-branded mounts
- Only one mount included so multiple purchases are needed for full-mount service
- Fitment limited to the 3.6L Atlas models and not suitable for other engines or years outside the listed range
Verdict: A cost-conscious, vehicle-specific front right engine mount replacement that restores engine stability for the Volkswagen Atlas 3.6L.
5. ShenBrala Engine & Transmission Mount Kit (4‑Piece) for Volkswagen Atlas / Atlas Cross Sport / Teramont V6 3.6L
| Included Components | 1 hydraulic left transmission mount, 1 hydraulic right engine mount, 1 rear lower engine mount (bushing), 1 rear upper engine mount (bushing) |
|---|---|
| Material Type | Metal, Rubber |
| Mounting Type | Bolt Mount |
| Fitment Note | Automatic transmission only; VW Atlas/Atlas Cross Sport/Teramont V6 3.6L |
This four-piece ShenBrala mount kit replaces the hydraulic engine and transmission mounts plus rear torque arm bushings used on VW Atlas, Atlas Cross Sport, and Teramont V6 3.6L models with automatic transmissions. It is typically used to stop excessive vibration, eliminate shift clunks, and restore factory drivetrain positioning after mounts wear out. The kit includes left and right hydraulic mounts and upper and lower rear bushings that are described as metal and rubber bolt-mount components and are sold as a matched set for direct fitment. In practice the mounts align with factory bolt holes and restore a firmer, quieter idle and crisper throttle response without introducing harshness when installed correctly. The main practical benefits are OEM-style fit, a full-set replacement to avoid mixing old and new parts, and simpler installation compared with sourcing individual pieces. Limitations are that this kit is specific to the V6 3.6L automatic fitment and does not cover other engines or manual transmissions, and buyer should verify part numbers or VIN to confirm exact compatibility before purchase.
Best for: Reliability-focused owners who prioritize restoring factory drivability and reducing vibration without frequent rework; ideal for those who want a complete, direct-fit set to return a VW V6 Atlas-family drivetrain to factory-like behavior.
Less Ideal for: Buyers seeking parts for non-V6 engines, manual transmissions, or multi-vehicle compatibility should look for a different kit that explicitly fits their configuration.
- Complete matched set includes hydraulic left and right mounts plus rear upper and lower bushings for one repair job
- Direct-fit bolt-mount design aligns with factory mounting points for straightforward installation
- Metal and rubber construction designed to balance vibration damping with drivetrain firmness
- Sold as a single kit so you replace all worn mounts at once and avoid uneven wear or mismatched feel
- Fitment is limited to VW Atlas, Atlas Cross Sport, and Teramont V6 3.6L models with automatic transmissions only
- Does not include fasteners or additional hardware beyond the four mount components listed
Verdict: A complete, direct-fit 4-piece mount kit that restores factory-like vibration control and drivetrain stability on V6 3.6L VW Atlas-family vehicles.
6. Ytrica 4-Piece Engine and Transmission Mount Kit for Volkswagen Atlas / Atlas Cross Sport / Teramont V6 3.6L (2018-2023)
| Fitment | 2018-2023 Atlas, 2020-2023 Atlas Cross Sport, 2019-2022 Teramont V6 3.6L |
|---|---|
| Set Name | 4-Piece Engine & Transmission Mount Kit |
| Manufacturer | Ytrica |
| Model Number | ZQ270 17123 |
This Ytrica 4-piece mount kit replaces the engine and transmission mounts on Volkswagen Atlas, Atlas Cross Sport, and Teramont V6 3.6L models to reduce vibration and eliminate drivetrain clunks. The kit includes the primary motor and transmission mounts built around a heavy-gauge steel core with rubber bushings pressed in place to control engine movement and maintain alignment. Installation requires supporting the engine but reviewers report the mounts line up with factory bolt holes and thread in smoothly, so a competent DIYer or a local shop can complete the job without part-fit headaches. In use the kit noticeably reduces idle shake and transmission shift clunking, improving cabin comfort and protecting surrounding components from excess movement. It is a direct replacement-style option that offers a lower-cost way to refresh worn mounts, though professional installation or proper tools are still needed for a safe, correct job and longevity depends on installation torque and driving conditions.
Best for: Convenience-driven buyers who want a straightforward, complete replacement kit to quickly restore smoothness and eliminate clunks without hunting for individual parts.
Less Ideal for: Drivers seeking upgraded performance or heavy-duty mounts for towing and aggressive use should look at specialty or reinforced options instead.
- Made to replace factory mounts for listed VW V6 3.6L models so fitment matches factory bolt locations
- Heavy-gauge steel internal framework for rigid support and maintained alignment
- Rubber bushings tightly pressed in place to control vibration and drivetrain movement
- Complete four-piece kit lets you replace all major mounts at once to restore cabin comfort
- Replacement-style parts may not match long-term durability of higher-end performance mounts
Verdict: A complete, factory-style mount kit that quickly restores smooth idle and eliminates drivetrain clunks on the VW Atlas family V6 3.6L models.
7. IROMEHONY Engine and Transmission Mount (replaces 3QF199555C) for Volkswagen Atlas / Atlas Cross Sport 2018–2023
| Replacement Part Number | 3QF199555C |
|---|---|
| Fitment | Volkswagen Atlas 2018-2023; Atlas Cross Sport 2020-2023 |
| Included Components | 1 x Engine Mount Transmission Mount |
| Brand | IROMEHONY |
This IROMEHONY engine and transmission mount replaces part number 3QF199555C and is sold as a single motor mount intended for Volkswagen Atlas and Atlas Cross Sport 2018–2023. It functions as a vibration isolation and drivetrain support component, securing the engine and transmission to the chassis while reducing vibration and movement under load. Typical use is as a like-for-like repair when a worn or broken mount is causing excess noise, vibration, or drivetrain misalignment. The listing emphasizes polymer construction, factory-style fitment and pre-delivery inspection, which suggests straightforward bolt-on installation for users with basic mechanical skills or for independent shops. Practical benefits include restoring a stable powertrain mounting, quieter operation, and avoiding dealer labor by allowing a DIY or local-shop replacement. Limitations are inherent to aftermarket single-piece mounts: material and long-term durability can vary compared with higher-end branded replacements and no detailed performance testing or extended lifespan data is provided in the listing.
Best for: Risk-averse mainstream buyers who prefer a factory-style, direct-replacement part to restore a quiet, stable ride without experimental upgrades; ideal for owners prioritizing reliable repairs and predictable compatibility.
Less Ideal for: Shoppers looking for premium performance mounts, race-oriented upgrades, or suppliers with certified long-term durability testing should consider higher-tier or OEM-sourced alternatives instead.
- Direct fit for Volkswagen Atlas and Atlas Cross Sport model years 2018–2023
- Sold as a single replacement mount for straightforward repair or swap
- Polymer construction aimed at vibration damping and durability
- Manufacturing inspection claimed to ensure consistent part quality
- Manufacturer provides limited independent testing or longevity data
- Sold as a single mount may require matching additional mounts if others are worn
Verdict: A straightforward, direct-fit replacement mount for Volkswagen Atlas owners who want to restore factory-like mounting and reduce vibration quickly.
Choosing the Right Volkswagen Atlas Engine Mount: Key Factors to Consider
Fitment and Compatibility
Accurate fitment ensures the mount aligns with factory mounting points and preserves driveline geometry. A mount designed specifically for the Volkswagen Atlas will reduce the need for modifications, prevent stress on adjacent brackets, and help maintain proper engine angle.
Compatibility also affects warranty and replacement intervals. Incorrect or loosely fitting mounts can shift under load, causing clutch or transmission linkage stress and accelerating wear on connected components.
Material and Construction
Mounts typically use rubber, polyurethane, or fluid-filled designs. Rubber offers good vibration isolation and cost efficiency, while polyurethane provides greater stiffness and longer service life but can transmit slightly more noise. Fluid-filled mounts use a hydraulic chamber to combine isolation and damping for a smoother feel.
Consider the operating environment of the Atlas, including exposure to heat, oil, and road salt. Materials that resist degradation from these factors will maintain performance and avoid premature failures.
Vibration and Noise Control
How a mount manages vibration affects cabin comfort and perceived build quality. Damping characteristics determine whether engine vibrations are isolated from the chassis or transmitted into the cabin. Softer mounts reduce harshness at idle but may allow more movement under load, while stiffer mounts limit movement but can make the cabin feel firmer.
Look for designs that balance idle refinement with control during acceleration to match your driving priorities, whether comfort-focused or performance-oriented.
Load Capacity and Torque Management
Mounts must withstand forces from engine torque, acceleration, and road impacts. A mount with adequate load capacity resists deformation and maintains engine position. Torque-management features, such as reinforced brackets or internal damping chambers, reduce engine rotation under load and protect transmission linkages.
Insufficient capacity can cause accelerated wear on the mount and connected components, leading to misalignment and the need for additional repairs.
Ease of Installation and Hardware
Installation complexity varies by design. Some mounts are direct-fit replacements that use factory hardware and bolt patterns, while others require additional brackets, adapters, or special torque procedures. Ease of installation affects labor time and the likelihood of correct reassembly.
Check whether the mount includes necessary fasteners and clear torque specifications. Proper installation protects against premature failures caused by incorrect torque or missing hardware.
Durability and Maintenance Life
Expected service life depends on material resilience and design quality. Durable mounts resist cracking, oil swelling, and fatigue under repeated load cycles. Maintenance intervals are influenced by driving conditions; frequent towing, off-road use, or exposure to contaminants can accelerate wear.
Prioritize mounts with higher lifecycle ratings or robust construction if you plan to keep the vehicle long term or use it in demanding conditions.
How We Chose the Best Volkswagen Atlas Engine Mount
We focused on components that meet fitment and durability expectations for the Volkswagen Atlas. Primary evaluation criteria included exact vehicle fitment and OEM-equivalent mounting points, material composition and resistance to heat and oil, load capacity and torque control under acceleration, and long-term durability tested via lifecycle ratings or manufacturer specifications. We also considered ease of installation and availability of mounting hardware to reduce installation variability. Noise and vibration control properties were assessed through material damping characteristics and design features that limit engine movement.We excluded components without clear Atlas-specific fitment information, products lacking material or load specifications, and items intended only for racing or highly modified engines. The end result is a list of options that prioritize correct fit, consistent performance, and predictable longevity for everyday driving conditions.
Our full evaluation process is outlined in our review methodology.
FAQ
What are common symptoms of a failing engine mount on a Volkswagen Atlas?
Common signs often include increased vibration in the cabin, especially at idle or during acceleration. You may notice unusual clunks or knocks when shifting from park to drive or when accelerating hard. Excessive engine movement during throttle application is another typical symptom that usually indicates a worn or damaged mount.
Can I replace a Volkswagen Atlas engine mount myself?
Replacing a mount is often manageable for someone with basic mechanical skills and the right tools. It typically requires supporting the engine safely, removing mounting bolts, and following torque specifications during reinstallation. Complex mounts or limited access may make professional installation advisable in some cases.
How long do engine mounts typically last?
Service life varies but many mounts last several years under normal driving conditions. Exposure to oil, road salt, heavy towing, or aggressive driving can shorten lifespan. Regular inspections for cracking, excessive movement, or degraded damping help identify when replacement is needed.
Will a stiffer mount reduce engine vibration?
A stiffer mount can limit engine movement and improve responsiveness, but it may transmit more vibration to the cabin. The best choice depends on whether you prioritize comfort or firmer engine control. Many drivers opt for a balanced design that reduces movement without creating excessive noise or harshness.
Do engine mounts require special torque during installation?
Yes, correct torque is important to ensure the mount functions as designed and to prevent stress concentrations. Manufacturer torque specifications should be followed and fasteners inspected for proper fit. Using the proper sequence and torque when tightening helps maintain alignment and avoid premature wear.
Conclusion
Prioritize fitment accuracy and material durability when selecting a mount for a Volkswagen Atlas. Balance vibration isolation against torque control based on whether you value everyday comfort or firmer engine restraint. Consider installation complexity and expected service life to align the choice with your driving habits and long-term ownership plans.Careful selection and proper installation reduce the chance of related issues and help preserve drivetrain components, so focus on mounts that deliver the right mix of compatibility, damping, and durability for your intended use.
Explore More:
- Check out all Volkswagen Atlas parts & accessories
- Explore Engine Mounts Maintenance & Repair Guides
- Explore Engine
- Browse all Auto Parts
