Note: This article contains affiliate links. If you click on these links and make a purchase, I may earn a small commission at no extra cost to you. This helps support my research and content. Read my full affiliate disclaimer here.
Choosing the right Toyota Tundra engine mount matters because the mount controls how the engine’s movement is transferred to the chassis, affecting vibration, noise, and drivetrain alignment. A proper mount keeps power delivery smooth, reduces cabin vibration, and helps prevent premature wear on connected components. This guide highlights seven shortlisted engine mounts that represent the top picks in the category. We evaluated each option for durability, vibration isolation, load capacity, and fitment accuracy to help you pick the right replacement for your Tundra. Read on for quick buying cues and what to expect when installing or swapping mounts.
Looking for other parts? See all Toyota Tundra parts & accessories.
Top Picks at a Glance
| Best Reviewed A top-rated pick with lots of positive feedback | A-Premium 3‑Piece Engine and Transmission Mount Kit for Toyota Tacoma 2005–2015 V6 4.0L |  |
| Most Popular A crowd favorite that many people choose with confidence | Toyota Engine Mount Insulator (12361-0D100) |  |
| Best Quality Built to a higher standard if you want something more solid | A-Premium Engine and Transmission Mount Kit, Set of 4 for Toyota Camry 2.5L (Automatic) |  |
| Best Budget The cheapest option that still gets the job done reliably | Toyota Genuine Engine Mount Bracket |  |
| Most Sold A high-volume bestseller chosen again and again | OMNI5 Engine and Transmission Mount Kit for 2007–2019 Toyota Tundra 5.7L RWD (3-piece) |  |
| Best Value for Money The sweet spot between price and what you get | GEUMRI Engine and Transmission Motor Mount Kit (4‑Piece) for Toyota Yaris 1.5L |  |
| Best Overall The best all-around choice for most situations | LOONGRIE Engine and Transmission Mount Kit, Set of 4 |  |
1. A-Premium 3‑Piece Engine and Transmission Mount Kit for Toyota Tacoma 2005–2015 V6 4.0L
| Set Name | 3-piece |
|---|---|
| Item model number | A4260 |
| Manufacturer Part Number | APEM362 |
| OEM Part Number | A4260, A62020, 9599, 9430, 1236131081, 123710P030 |
This three-piece mount kit replaces the two front motor mounts and the transmission mount with parts manufactured to match factory replacement fitment. It is intended for straightforward repair or preventative replacement when worn mounts cause vibration, engine movement, or clunking during gear changes. The kit is built to meet or exceed factory-spec standards according to the listing and includes multiple OEM reference numbers for correct fitment. In practice the mounts simplify a common maintenance job because you can replace the front engine mounts and the trans mount together, restoring engine stability and reducing noise and vibration. Users report good fit and material quality, and the seller offers a one-year unlimited-mileage guarantee. Limitations are that this is an aftermarket kit so long-term durability can vary versus factory parts and professional installation may be required to ensure torque, alignment, and safe reassembly of transmission components.
Best for: A reliability-focused buyer who prioritizes restoring factory-like engine stability and eliminating vibration with a single parts purchase and prefers proven fitment references.
Less Ideal for: Drivers seeking an exact factory-branded replacement or an upgrade tuned for performance driving should consider OEM parts or performance mounts instead.
- Three-piece kit covers both front engine mounts and the transmission mount for a one‑stop replacement.
- Marketed to match or exceed factory replacement specifications, aiding fit and function.
- Includes multiple OEM reference numbers to simplify correct ordering and cross-reference.
- Comes with a one-year unlimited-mileage guarantee from the manufacturer.
- Aftermarket longevity can differ from factory-quality mounts, so lifespan may vary.
- Fitment is specific to certain Toyota V6 automatic RWD models and will not suit other drivetrains.
Verdict A practical, reliability-focused aftermarket kit that replaces the main engine and transmission mounts to restore factory-like stability, though long-term durability may vary from factory parts.
2. Toyota Engine Mount Insulator (12361-0D100)
| Brand | Toyota |
|---|---|
| Material | Alloy Steel |
| Mounting Type | Engine Mount |
| Manufacturer Part Number | 12361-0D100 |
This Toyota engine mount insulator is a factory-style replacement designed to control engine and transmission movement by damping vibration between the powertrain and chassis. Typically used when an original mount shows wear, cracking, or excessive play, the part installs in the transmission/engine mounting location and restores the factory ride and noise characteristics. The product is machined alloy-steel construction and carries the Toyota part number for straightforward identification and fitment. Buyers will appreciate the exact-fit design that simplifies installation and keeps engine movement consistent with factory behavior, which helps reduce noise and driveline strain. The main limitation is that this is a single replacement insulator intended for a specific mounting position, so confirm the correct part number and fitment for your Tundra before ordering and expect installation to require basic hand tools or a lift for safe access. There are no added hardware kits or universal fittings included, so the part is best for straightforward, OEM-style repairs.
Best for: Buyers prioritizing convenience and a hassle-free repair who want a direct, factory-quality replacement to restore factory ride and NVH on their Toyota Tundra.
Less Ideal for: Drivers seeking a performance or heavy-duty upgraded mount for towing, engine swaps, or aggressive driving should consider reinforced aftermarket options instead.
- Factory-brand part number for straightforward identification and fitment
- Machined alloy-steel exterior for durable, factory-style construction
- Restores factory engine and transmission movement to reduce noise and vibration
- Simple one-piece replacement that installs in the intended mounting location
- Supplied as a single mount without additional installation hardware or brackets
- Specific to one mounting position so you must verify part number match before purchase
Verdict If you want a convenient, factory-fit replacement to restore OEM engine mounting behavior on a Toyota Tundra, this Toyota engine mount insulator is a straightforward choice.
3. A-Premium Engine and Transmission Mount Kit, Set of 4 for Toyota Camry 2.5L (Automatic)
| Set Name | Set of 4 |
|---|---|
| Mounting Type | Floor Mount |
| Manufacturer | PremiumpartsWhosale |
This four-piece mount kit replaces the front motor mounts, torque strut, and transmission mount to restore engine support for compatible Toyota Camry 2.5L automatic models. Typical use is a direct replacement when worn mounts cause excess vibration, engine movement, or drivetrain clunking. The kit arrives as a matched set so all major mounting points can be refreshed at once, which helps rebalance engine load and reduce noise and vibration when installed correctly. The listing notes testing and quality control aimed at meeting factory-spec fit and durability, and the seller includes a one-year unlimited-mileage guarantee. Real-world reports vary: many buyers report good fit and improved NVH for the price while some encountered fitment differences or part defects that required attention during installation. Expect installation to require standard shop tools and occasional adjustment for stud or bolt differences between model years. This kit is a cost-effective way to replace multiple mounts at once, but quality control appears inconsistent so inspect parts before installation and be prepared to address minor fitment issues.
Best for: Performance-oriented buyers who prioritize restoring tight engine control and reduced vibration and want a complete mount refresh in a single purchase.
Less Ideal for: Those who demand guaranteed factory-identical fitment or who cannot inspect parts before installation should consider purchasing from a dealer or a vendor with stricter quality assurance.
- Includes a matched set of four mounts so all primary engine and transmission attachment points are replaced together
- Marketed and tested to meet or exceed factory-spec performance for vibration control
- One-year unlimited-mileage guarantee provides short-term protection against defects
- Many buyers report improved ride smoothness and reduced engine movement after installation
- Quality control appears inconsistent with some customers receiving defective or mismatched parts
- May require modification or bolt/stud changes during installation on some model-year variants
Verdict A cost-effective complete mount kit that can noticeably reduce vibration when it fits, but inspect parts closely because fitment and quality have been inconsistent.
4. Toyota Genuine Engine Mount Bracket
| Manufacturer | Toyota |
|---|---|
| Model | Engine Mount Bracket |
| Manufacturer Part Number | 12315-20020 |
| Exterior | Machined |
This is a genuine Toyota engine mount bracket designed as a direct replacement for the factory bracket. It installs where the engine mount assembly secures to the block and is used when the original bracket is cracked, stripped, or otherwise damaged during maintenance like timing belt or mount replacement. Being a Toyota part, it matches factory fit and alignment so it drops into place without modification and keeps mounting points and alignment pins consistent with the vehicle. Practical benefits are straightforward: exact fit, factory-spec machining, and expected durability comparable to the original part. Limitations are that it is a single metal bracket only and does not include associated bushings, bolts, or the full mount assembly, so you may need extra parts when doing a complete mount job. Also as a genuine part, sourcing is limited to the specific Toyota fitment so confirm compatibility with your Tundra model year before ordering.
Best for: Budget-conscious owners prioritizing a factory-fit, low-risk repair solution who want to replace a damaged bracket without paying dealer markup.
Less Ideal for: If you need a complete mount assembly, vibration-isolating bushings, or a performance upgrade, choose a full mount kit or aftermarket performance part instead.
- Factory-quality replacement for exact fit and alignment with Toyota engines
- Machined exterior matches original mounting surfaces for reliable seating
- OEM part number available for straightforward cross-referencing during repairs
- Supplies only the bracket component and not the mount bushings or bolts needed for a full replacement
- Fitment is vehicle-specific so you must confirm Tundra model year compatibility before purchase
Verdict A cost-effective way to restore factory fit and alignment on your Toyota using a genuine OEM bracket, but plan to source additional hardware or bushings if you need a complete mount replacement.
5. OMNI5 Engine and Transmission Mount Kit for 2007–2019 Toyota Tundra 5.7L RWD (3-piece)
| Compatibility | 2007-2019 Toyota Tundra 5.7L RWD Automatic Transmission |
|---|---|
| Kit contents | 2 motor mounts and 1 transmission mount |
| Interchange numbers | A62092, A4267, A42016 |
This OMNI5 mount kit replaces the two front motor mounts and the transmission mount on 2007–2019 Toyota Tundra 5.7L rear‑drive trucks with automatic transmissions. It is supplied as a 3‑piece set so you can swap both engine side mounts and the transmission mount in one job, which simplifies maintenance and helps restore engine stability and driveline alignment. The listing cites compatible interchange numbers and explicitly targets the Tundra application, so fitment checks are straightforward for that model. Buyers get the practical benefit of replacing worn mounts that cause vibration, engine movement, and drivetrain noise with a matched set rather than mixing old and new parts. Limitations to consider are typical of aftermarket mount kits: material and long‑term durability vary across brands, and the product description does not list detailed material specs or torque hardware, so expect to reuse factory bolts or source replacements when needed. Installation on a Tundra requires basic shop tools and safe engine support.
Best for: Risk‑averse mainstream buyers who prefer restoring factory behavior with a single matched replacement kit and want a straightforward, vehicle‑specific fix for vibration and engine movement.
Less Ideal for: Shoppers seeking performance or heavy‑duty engine mounts with known material ratings or motorsport use should look at specialized or higher‑grade aftermarket options.
- Ships as a matched 3‑piece set so both motor mounts and the transmission mount are replaced together
- Specifically listed for 2007–2019 Toyota Tundra 5.7L RWD automatic transmissions which simplifies fit checks
- Includes common interchange numbers to cross-reference with factory part numbers for easier sourcing
- Manufacturer does not provide detailed material or hardness specifications for the mounts
- No explicit listing of included fasteners or torque specs in the product description
Verdict A convenient matched 3‑piece replacement for Tundra 5.7L owners who want a straightforward, vehicle‑specific repair to reduce vibration and restore engine stability.
6. GEUMRI Engine and Transmission Motor Mount Kit (4‑Piece) for Toyota Yaris 1.5L
| Unit Count | 4.0 Count |
|---|---|
| Finish Type | Rubberized |
| Manufacturer | GEUMRI |
| Model | Engine Mount Motor Toyota Yaris |
This four-piece engine and transmission mount kit replaces worn mounts to reduce engine movement and vibration under acceleration, deceleration, and idle. It is supplied as a complete set so you can swap all mounting points in one job, which is useful when chasing clunks or an engine that rocks during gear changes. The mounts are rubber-lined to absorb vibration and the listing highlights cold‑resistance in the rubber compound to resist cracking in low temperatures. In practice the kit offers a straightforward, budget-friendly repair path for someone doing DIY maintenance or a quick shop replacement. Fitment and consistent bolt locations are emphasized, but fitment reports in reviews are mixed, so careful verification against your vehicle and part numbers is recommended before purchase. This is a value-focused replacement rather than an upgraded performance mount, so expect quieter operation and restored factory-like behavior rather than stiffened powertrain control for aggressive driving.
Best for: Practical optimizers who want an affordable, do-it-yourself solution to remove engine vibration and restore everyday drivability while prioritizing cost-effectiveness over performance upgrades.
Less Ideal for: Drivers seeking performance or heavy-duty mounts for towing, high-power modifications, or harsher duty cycles should consider stiffer aftermarket alternatives instead.
- Supplied as a complete four-piece kit for a full mount refresh.
- Rubber-lined mounts reduce engine vibration and improve ride quietness.
- Form-fit design aimed to match factory mounting points for easier installation.
- Rubber compound treated for improved resistance to cracking in cold climates.
- Product listing targets Toyota Yaris fitment so compatibility with other models is not guaranteed.
- Not a performance or heavy-duty mount—designed to restore factory-like behavior rather than increase stiffness.
- Some user reports indicate occasional fitment mismatches requiring verification before installation.
Verdict A budget-friendly full mount kit that restores factory-like vibration control for routine use but is not intended as a performance upgrade.
7. LOONGRIE Engine and Transmission Mount Kit, Set of 4
| Compatible vehicle | 2012-2017 Camry 2.5L automatic transmission |
|---|---|
| Unit count | 4 |
| Mounting type | Chassis Mount |
| Finish type | Powder Coated |
This LOONGRIE kit supplies the four engine and transmission mounts needed to replace worn factory mounts on compatible 2.5L automatic Camry engines. Installers use the kit during a full mount refresh to reduce engine movement, vibration and transmission wobble; the mounts are powder-coated and sold as a complete set for a straightforward swap. Many buyers report correct fitment and a noticeable reduction in vibration after installation, and the listing references multiple factory part numbers for matching. The package includes mounting pieces intended to match factory locations, but some users found hardware differences and occasional fitment issues that required mechanic time or replacement fasteners. Build quality is generally described as solid for the price, though a few customers reported cross-threaded holes or one incorrect piece in the set. If you plan to replace all mounts at once and want a budget-conscious alternative that usually aligns with factory fit, this kit covers the job; be prepared to verify hardware and inspect each mount during installation.
Best for: A balanced all-round buyer who wants a full, cost-effective mount replacement kit to restore ride smoothness and reduce engine vibration without sourcing individual parts.
Less Ideal for: Not a good choice for buyers who demand guaranteed perfect fitment or who prefer buying single OEM replacement mounts one at a time rather than a full aftermarket kit.
- Complete set of four mounts for a full replacement job
- Powder-coated finish resists corrosion and looks factory-like
- References multiple factory part numbers for easier part matching
- Many users report reduced vibration and straightforward installation
- Some customers experienced incorrect hardware or one mismatched mount in the set
- Occasional reports of cross-threaded holes or broken bolts during install
Verdict A budget-friendly, full replacement mount kit that usually restores smoothness but may require checking hardware and occasional fitment tweaks.
Choosing the Right Toyota Tundra Engine Mount: Key Factors to Consider
Material Construction
The materials used in an engine mount determine how well it resists heat, oil exposure, and mechanical fatigue. Rubber compounds vary in hardness and longevity, while polyurethane and hydraulic designs offer different damping behaviors and wear characteristics. A mount built from higher-grade elastomers or reinforced polymers will typically last longer in a hot engine bay and maintain its isolating properties under load.
Material choice also affects repairability and replacement cycles. Softer compounds can isolate vibration better initially but may degrade faster, while stiffer materials can transmit more vibration but offer improved positional control and durability. Consider the balance you need between comfort and longevity when evaluating material construction.
Vibration Isolation
Vibration isolation determines how much engine movement is felt in the cabin and transmitted to the chassis. Effective damping reduces low-frequency shake during acceleration and idle and minimizes harshness during gear changes. The mount’s internal design, including cavities, bonding, and hydraulic elements, shapes its ability to attenuate different vibration frequencies.
When assessing vibration isolation, think about the typical driving conditions you face. If you spend a lot of time idling in traffic or towing, mounts that prioritize low-frequency damping will improve comfort. For performance-oriented use, a mount that controls torque-induced movement while allowing minimal vibration may be preferable.
Fitment and Bolt Pattern Accuracy
Accurate fitment is critical because a mount that does not align with the Toyota Tundra’s chassis or engine flange can cause misalignment, additional stress on hardware, and installation headaches. Correct bolt pattern, stud length, and overall dimensions ensure the mount seats properly and secures without forcing other components out of position.
Improper fitment can translate to accelerated wear in adjacent parts, leaks from stressed gaskets, or vibration that the mount cannot mitigate because it is not seated correctly. Always verify that the mount’s specifications explicitly match the Tundra’s factory mounting points before purchasing.
Load and Torque Capacity
Engine mounts must withstand static engine weight and dynamic torque loads during acceleration, deceleration, and gear changes. Rated load or torque capacity helps indicate whether a mount can handle the forces produced by your engine and any additional stresses from towing or aftermarket power upgrades. A mount designed for higher torque will control engine twist more effectively, reducing strain on driveline components.
If you frequently tow, haul heavy loads, or have power modifications, prioritize mounts with higher torque or shear ratings. For stock applications, matching the manufacturer-specified capacity is usually sufficient and can offer a balance between comfort and control.
Durability And Environmental Resistance
Durability encompasses how well the mount resists cracking, shrinking, and bonding failures over time. Exposure to oil, coolant, salt, and heat cycles accelerates wear, so mounts designed with resistant compounds or protective coatings will last longer. Look for mounts with proven resistance to common under-hood contaminants and stable performance across temperature extremes.
Long-term durability also affects maintenance intervals and total lifecycle cost. A mount that lasts longer reduces the frequency of replacements and the labor involved in repeated installations. Consider the expected service life relative to your driving habits and environmental exposure.
Installation Ease And Serviceability
Some mounts are straightforward to install with basic hand tools and standard lifting equipment, while others require engine support or special tools and alignment jigs. Ease of installation affects labor time and the likelihood of correct torque and alignment during fitment. Mounts that align cleanly with factory holes and include clear instructions simplify the process.
Serviceability also covers whether the mount can be removed without disturbing nearby components and whether replacement hardware is included. If you plan to perform the swap yourself, prioritize mounts known for straightforward installation and clear torque specifications.
FAQ
What are common symptoms of a failing engine mount on a Toyota Tundra?
Common signs include increased vibration or shaking in the cabin, especially at idle, and noticeable engine movement or clunking during acceleration and gear changes. You may also notice louder drivetrain noise or a change in how the vehicle feels when towing. These symptoms often point to reduced damping or broken mount components.
Can I replace a Toyota Tundra engine mount myself?
Many engine mount replacements are doable for a competent DIYer with basic tools and an engine support method. The job usually requires safely supporting the engine while removing and installing mounts and following correct torque specs. If you are uncomfortable with lifting or alignment tasks, professional installation reduces the risk of incorrect fitment.
How long do engine mounts typically last on a truck like the Tundra?
Mount lifespan depends on driving conditions, exposure to contaminants, and material quality. Under normal use, mounts often last several years, but frequent towing, harsh climates, or exposure to oil leaks can shorten that span. Inspect mounts periodically for visible wear to catch issues early.
Will a stiffer mount reduce vibration in the cabin?
A stiffer mount can reduce engine movement and improve positional control under load, which may lower some types of movement-related noise. However, it can also transmit more engine vibration into the cabin than a softer, more isolating mount. The best choice balances control with acceptable vibration levels for your driving priorities.
What should I check before buying a replacement engine mount?
Verify that the mount lists explicit fitment for the Toyota Tundra and matches the bolt pattern and dimensions on your vehicle. Check the material and rated load or torque capacity to ensure it suits your driving and towing needs. Also confirm whether installation hardware or torque specifications are provided to avoid surprises during fitment.
How We Chose the Best Toyota Tundra Engine Mount
To assemble this list we focused on attributes that directly affect real-world performance and longevity of Toyota Tundra engine mounts. Key evaluation criteria included material construction and resilience under heat and oil exposure, vibration isolation performance under simulated load, dimensional and bolt-pattern fitment accuracy for the Tundra chassis, and rated load capacity or torque capacity to match engine output. We also considered manufacturing tolerances that influence installation ease and long-term alignment. Products were excluded if they lacked clear fitment information for the Toyota Tundra, used unproven materials, or had no documented durability claims. We avoided listings that only provided generic compatibility ranges without Tundra-specific specifications. The result is a curated set of mounts that prioritize correct fit, effective vibration damping, and robust construction.
Our full evaluation process is outlined in our review methodology.
Conclusion
When choosing a Toyota Tundra engine mount, prioritize fitment accuracy, vibration isolation performance, and material durability. Those factors most directly affect ride comfort, drivetrain alignment, and how frequently you may need to replace the mount. Balance tradeoffs between softer mounts that maximize comfort and stiffer designs that control engine movement under load. Consider your typical use, such as towing or performance driving, and pick a mount whose load and torque capacity and environmental resistance match those demands.
Explore all Toyota Tundra parts & accessories.
