Note: This article contains affiliate links. If you click on these links and make a purchase, I may earn a small commission at no extra cost to you. This helps support my research and content. Read my full affiliate disclosure here.
Picking the right Scion xB engine mount affects more than just noise levels. A properly chosen mount reduces engine movement, cuts down vibration felt in the cabin, and helps protect drivetrain components over time. This guide covers the top shortlisted options for the Scion xB, each selected for specific strengths in durability, isolation, or fitment.Below we explain the criteria used to evaluate these mounts and what to expect when replacing a worn unit, then present the top picks for common use and common failure modes.
Looking for other parts? See all Scion xB parts & accessories.
Top Picks at a Glance
1. ENA Engine and Transmission Mount Set (4) for Scion xB 2008–2015 2.4L
| Set Name | Set of 4 |
|---|---|
| Material Type | Alloy Steel, Aluminum |
| Mount Material | Steel Rubber |
| Vehicle Fitment | Scion xB 2008-2015 L4 2.4L |
This ENA four-piece mount kit replaces the front, rear and two transmission mounts on 2.4L Scion xB models to reduce vibration and restore solid engine positioning. It is supplied as a set of four factory-style components made from steel and rubber with a painted finish, intended for straightforward bolt-in replacement during routine engine or transmission service. Buyers will notice quieter operation and reduced engine movement under acceleration compared with worn mounts, and the combo approach avoids sourcing individual pieces. Installation typically requires basic hand tools and moderate mechanical familiarity since access can be tight on some mount locations. The mounts are a cost-conscious aftermarket option that aims for durability, but long-term lifespan will depend on driving conditions and installation torque accuracy. This kit is best when you want a complete, like-for-like replacement to address vibration and alignment issues without upgrading to performance mounts.
Best for: Balanced all-round buyers who want a one-stop, factory-style replacement to restore ride comfort and reduce vibration on a daily-driven Scion xB without pursuing performance upgrades.
Less Ideal for: Drivers seeking high-performance or race-oriented engine mounts for aggressive driving should consider stiffer, performance-specific options instead.
- Complete set of four mounts covers front, rear and both transmission positions for a single repair
- Direct-replacement design for straightforward bolt-in installation with factory-style fit
- Steel and rubber construction balances vibration damping with structural support
- Painted or powder-coated finish helps resist corrosion on underhood components
- Durability may vary with driving conditions and is not guaranteed beyond standard expected life
- Installation can be moderately challenging in tight engine bay areas and may require minor disassembly
Verdict: A complete, factory-style mount kit that restores quieter operation and stable engine mounting for 2.4L Scion xB models.
2. MTC Engine Mount, Right Side, Fits Scion xA/xB and Toyota Echo (Model 9112 / 12305-21060)
| Manufacturer | MTC |
|---|---|
| Model | 9112 / 12305-21060 |
| Exterior | OEM Fit and Finish |
| OEM Part Number | 12305-21060 |
This MTC right-side engine mount is a direct-fit replacement intended for Scion xA and xB (2004-2006) and Toyota Echo (2000-2001, 2003-2005). It installs in the factory location to support the engine and reduce vibration transmitted to the chassis. The unit is marketed with OEM fit and finish and lists multiple OEM part numbers for cross-reference, which helps confirm compatibility when swapping a worn mount. In daily use it restores proper engine alignment and reduces movement during acceleration and deceleration, improving drivetrain feel on an older xB. The heavier-duty construction claimed by the manufacturer suggests longer life than a deteriorated factory rubber mount, but buyers should expect stiffer NVH characteristics compared with softer mounts if they prioritize comfort. Installation is straightforward using standard hand tools but may require engine support during the swap. Overall this is a practical, performance-oriented replacement for restoring engine stability on the specified Scion and Toyota models.
Best for: Performance-oriented owners who want a durable, factory-style replacement to restore engine stability and reduce movement under load while prioritizing drivetrain feel over ultimate cabin comfort.
Less Ideal for: Owners seeking the quietest, most comfort-focused ride who prefer softer vibration isolation should consider alternative mounts tuned for NVH reduction rather than stiffer performance replacements.
- Direct-fit design for specified Scion xA/xB and Toyota Echo models simplifies replacement
- Listed OEM part number cross-references aid correct fitment verification
- Manufactured with heavier-duty construction for improved longevity over worn factory mounts
- Factory-style exterior finish for a clean, stock appearance after installation
- Heavier-duty mount may transmit more vibration and noise into the cabin versus softer mounts
- Fitment limited to the listed model years only
Verdict: A factory-fit, heavier-duty right engine mount that restores engine stability and durability on eligible Scion xB and related models.
3. Yunnergo 4-Piece Engine and Transmission Mount Kit for Scion xB 2.4L (2008–2012, 2014–2015)
| Compatible Engine | 2.4L L4 |
|---|---|
| Fitment Years | 2008-2012, 2014-2015 |
| Unit Count | 4 |
| Material Type | Alloy Steel |
This Yunnergo 4-piece mount kit replaces the front, right, rear engine mounts and left transmission mount on Scion xB 2.4L automatic models. Made from alloy steel with a powder-coated finish, the set aims to restore factory-style support for the engine and transmission to reduce vibration, drivetrain movement, and engine bay noise. Installation is intended as direct-fit with the listed replacement part numbers, so it can be swapped in without modification when the mounts are worn or damaged. The metal construction gives a sturdy feel and should hold up under normal daily driving, while the package includes the four positions needed for a full mount refresh. Limitations include the kit being an aftermarket option rather than a factory-branded part and potential variation in fit or rubber hardness compared with original factory mounts, which can affect NVH character. For a practical owner looking to refresh worn mounts affordably, this kit delivers most of the needed components in one purchase.
Best for: Practical owners who prioritize value and want a straightforward, budget-conscious rebuild of the Scion xB 2.4L drivetrain mounts to restore comfort and stability without overspending.
Less Ideal for: Buyers seeking exact factory-matching ride and noise characteristics or those who prefer OEM-branded components for warranty and long-term assurance should consider factory-quality alternatives.
- Complete 4-piece kit includes front, right, rear engine mounts and left transmission mount for a full replacement
- Alloy steel construction with powder-coated finish for corrosion resistance and durability
- Direct-replacement design using common replacement part numbers to simplify installation
- Compact package reduces drivetrain movement and can noticeably lower engine vibration and noise when worn mounts are replaced
- Aftermarket unit so rubber durometer and NVH behavior may differ from factory mounts
- Not a branded factory part which can lead to fit or finish variation between batches
Verdict: A cost-conscious, complete replacement mount kit that restores engine and transmission stability for Scion xB 2.4L automatic models.
4. NewYall Engine and Transmission Mount Kit for Scion xA/xB (1.5L)
| Fitment | Scion xA/xB 1.5L 2004–2006 |
|---|---|
| Set contents | Rear motor mount, right motor mount, transmission mount |
| Brand | NewYall |
This NewYall kit provides the three mounts commonly replaced together on the Scion xB 1.5L: rear motor mount, right motor mount, and transmission mount. It is intended for DIY or independent-shop installs to quiet engine movement and reduce vibration when the factory mounts wear out. The listing shows vehicle-specific fitment for the 2004–2006 Scion xB 1.5L and the kit includes the three pieces needed for a basic mount refresh. Real-world buyers report the parts restore firmness and lower vibration, but some installers note fitment and alignment fiddliness during installation and uneven welds or threaded hardware that can complicate bolting in tight spaces. Because the kit is aftermarket, expect some extra patience to align bolts and press-in components compared with a factory-quality replacement, but the parts can deliver acceptable NVH improvement at a lower cost when fitted carefully.
Best for: Cost-conscious owners focused on getting a functional, budget-friendly mount refresh for their Scion xB 1.5L who plan to install the parts themselves or have an independent shop perform the replacement.
Less Ideal for: Owners seeking an exact factory-quality replacement with guaranteed bolt‑perfect fit and maximum longevity should consider higher-end or OEM-sourced mounts instead.
- Vehicle-specific fit for Scion xB 1.5L (2004–2006) covering engine and transmission mounts
- Includes the three mounts needed for a typical replacement job so you can change all worn points at once
- Reported to noticeably reduce engine vibration and restore firmer engine positioning
- Lower-cost aftermarket option compared with dealership or premium-brand kits
- Some units may have imperfectly aligned welded nuts or pressed bolts that require extra effort to fit
- Aftermarket fit can need additional adjustment, motor support, or light rework during installation
- Mixed quality reports from users suggest variable long-term durability compared with factory-quality parts
Verdict: A wallet-friendly, vehicle-specific mount kit that can restore vibration control on a Scion xB 1.5L but may require extra care during installation due to variable fitment.
5. PATEWIN Engine Mount Kit (2 Motor Mounts + 1 Transmission Mount) for Toyota Echo / Yaris / Scion xA/xB
| Kit Contents | 2 motor mounts and 1 transmission mount |
|---|---|
| Material Type | Rubber with steel components |
| Fitment | Direct OEM fitment for specified vehicles |
| Compatible Models | 2000-2005 Toyota Echo, 2004 Toyota Yaris, 2004-2006 Scion xA/xB |
This PATEWIN kit includes two motor mounts and one transmission mount designed as a direct-fit replacement for older Toyota Echo, Yaris and Scion xA/xB models. The mounts pair steel mounting components with bonded rubber to absorb engine vibration and limit movement under acceleration, which helps reduce clunks and driveline stress. Typical use is a like-for-like service replacement when original mounts show cracking, rubber separation, or excessive engine movement. Notable features are the factory-style fitment, multi-layer anti-corrosion treatment on metal parts, and the inclusion of all three locations commonly replaced together, which simplifies a coordinated repair. In practice the kit restores a firmer idle and reduces tactile vibration transmitted to the cabin, and its construction aims for durability against heat and road exposure. Limitations are that this is an aftermarket option so fitment should be confirmed against the vehicle VIN and it does not include hardware like specialty bolts or alignment aids that some installations may require.
Best for: Reliability-focused owners who prioritize restoring factory-like stability and reducing vibration on older Scion xB examples and want a coordinated kit to replace multiple mounts at once.
Less Ideal for: Buyers seeking vehicle-specific OEM parts tracking or those who need a mount set with included specialty bolts and alignment accessories should consider other options.
- Sold as a complete kit (2 motor mounts + 1 transmission mount) for coordinated replacement
- Engineered steel components with bonded rubber to absorb vibration and stabilize the powertrain
- Built for direct factory-style fitment to match original mounting points
- Anti-corrosion treatment on metal parts for longer service life in road conditions
- Aftermarket unit may require verification of exact fit using VIN or compatibility table
- Does not include specialty installation hardware or alignment tools that some shops use
Verdict: A practical, reliability-focused engine mount kit that restores powertrain stability and reduces vibration on older Scion xB and related Toyota models.
6. TRQ Engine and Transmission Mount Kit (3-piece) for Scion xA/xB and Toyota Echo
| Fitment Vehicles | Scion xA (2004-06), Scion xB (2004-06), Toyota Echo (2000-05) – Automatic Transmission |
|---|---|
| Quantity | 3 Piece |
| Brand | TRQ |
| Manufacturer Part Number | MTA34406 |
This TRQ kit supplies an engine mount, a rear engine mount, and a transmission mount intended as direct replacements for the original parts on Scion xA, xB, and Toyota Echo models with automatic transmissions. Typical use is a complete mount refresh when vibration, drivetrain movement, or noise indicates aging mounts. The mounts come preassembled and painted for corrosion resistance and are packaged as a matched set to restore factory alignment and reduce engine shake. TRQ highlights DIY support with installation videos that simplify the process for home mechanics and can cut shop time. Practical benefits include matching mounting points for a straightforward swap and a lower cost compared with dealer parts. Some buyers report occasional fitment quirks like missing small fasteners or tight access for certain studs, and a minority have experienced early failures on unrelated vehicle models, so long-term durability can vary by application. Expect noticeably reduced vibration after installation but plan for basic tools and possibly sourcing a small bolt if a hardware piece is not included.
Best for: Buyers who prioritize convenience and want a ready-to-install, lower-cost replacement kit that makes a full mount service doable at home with minimal guesswork.
Less Ideal for: If you prefer guaranteed long-term performance from dealer-sourced parts or need a lifetime-duty heavy-use solution, consider factory-quality replacements or upgraded performance mounts instead.
- Three-piece matched kit replaces engine, rear engine, and transmission mounts together for consistent fit and reduced drivetrain movement
- Preassembled direct-replacement design simplifies installation and preserves factory alignment
- Painted/powder-coated finish helps resist corrosion for longer service life
- TRQ provides DIY installation videos to guide home mechanics through the swap
- Some units may lack a small mounting fastener and require the buyer to source a bolt
- A few users reported early failure on certain vehicles, so longevity can be inconsistent across applications
Verdict: A convenient, budget-friendly matched mount kit that restores smoothness quickly for Scion xB drivers but may require minor hardware or expect variable long-term durability.
7. SCITOO Engine and Transmission Mount Set (fits 2004-2006 Scion xA / 2004-2006 Scion xB / 2000-2005 Toyota Echo / 2004 Toyota Yaris)
| Material Type | Alloy Steel, Aluminum |
|---|---|
| Mounting Type | Chassis Mount |
| Set Name | Engine Motor Mount and Transmission Mount Set (1 Piece) |
| Manufacturer | SCITOO |
This SCITOO engine and transmission mount set is a direct-fit replacement intended for Scion xA and xB models and certain Toyota Echo and Yaris years. It replaces worn mounts to reduce engine movement and vibration transfer into the cabin, restoring a smoother, more stable feel during acceleration and idle. Built from alloy steel and aluminum with a polished finish, the set is described as durable and heat resistant and ships as a one-piece mount set intended for chassis mounting. In real-world use this kind of kit is typically installed when original mounts show cracking, excessive engine sway, or increased vibration; it is suited to routine DIY swap-outs or shop installs. Important limitations are that fitment must be confirmed against the vehicle's exact part numbers and the listing covers specific model years only, so verification is necessary before purchase. The product offers a straightforward, cost-effective way to return factory-quality engine support without more complex drivetrain work.
Best for: Risk-averse mainstream buyers who prioritize restoring factory-like comfort and minimizing drivetrain vibration with a straightforward, factory-replacement style part.
Less Ideal for: Buyers seeking performance mounts with stiffer tuning or those who need a complete multi-mount overhaul across different model years should consider alternative options.
- Direct-fit replacement for listed Scion and Toyota model years to restore factory ride and reduce vibration
- Constructed from alloy steel and aluminum for heat and wear resistance
- Includes both engine and transmission mount components in a single set for coordinated replacement
- Polished finish and chassis-mount design match common factory installation methods
- Fitment is limited to the specific model years listed and requires confirming part numbers before installation
- Contains only the parts shown as a one-piece set so additional mounts may be needed for full drivetrain repairs
Verdict: A practical, factory-style replacement mount set that restores engine stability and reduces cabin vibration for the specified Scion and Toyota models.
Choosing the Right Scion xB Engine Mount: Key Factors to Consider
Fitment and Vehicle-Specific Design
Correct fitment is the most important factor because engine mounts must align with factory bolt patterns and engine orientation. A mount designed specifically for the Scion xB reduces installation time and avoids modifications that can compromise safety or introduce stress points.
Vehicle-specific designs also account for engine weight, transmission mounting points, and the geometry that affects how force is transmitted to the chassis. Choosing the right fit reduces the chance of accelerated wear on adjacent components and ensures the mount performs as intended under normal driving conditions.
Material and Construction
Materials determine a mount's resistance to heat, oil, and mechanical fatigue. Rubber compounds are common for vibration damping, while polyurethane or bonded metal designs trade some isolation for increased stiffness and longevity. Consider how exposure to engine oil or road contaminants will affect the chosen material over time.
Construction quality, such as the thickness of bonding layers and robustness of metal brackets, affects failure modes. A well-constructed mount will show consistent material bonding and corrosion-resistant metal finishes to prolong service life.
Vibration Isolation and Ride Comfort
A mount's ability to isolate vibration directly influences cabin comfort and perceived refinement. Softer mounts typically reduce high-frequency buzz and minor shakes, while firmer mounts control larger engine movements at the expense of transmitting more vibration.
Think about your driving priorities: daily commuting and comfort favor better isolation, while performance-oriented needs may prioritize stiffness. The right compromise will minimize audible noise and reduce fatigue on other drivetrain parts.
Torque Control and Load Management
Engine torque creates rotational forces that mounts must resist to prevent excessive movement under acceleration or deceleration. A mount with good torque control maintains alignment between the engine and transmission, reducing strain on driveline components and avoiding clunking or sudden shifts in engine position.
Design features such as internal fluid chambers, dampers, or reinforced brackets can improve torque resistance. Consider the engine's torque output and typical driving habits when judging how robust the torque management needs to be.
Durability and Maintenance Factors
Durability relates to how long the mount will function before showing signs of fatigue, cracking, or loss of damping ability. Frequent exposure to heat cycles, oil leaks, and road debris accelerates aging. Choose designs known for resistance to those stressors.
Maintenance factors include whether the mount is serviceable or requires complete replacement and how easy it is to inspect during routine servicing. Longer-lasting mounts reduce long-term maintenance frequency and the chance of secondary damage to connected components.
Installation Complexity and Serviceability
Installation difficulty affects total labor time and whether you can realistically replace the mount at home or need professional help. Some mounts require engine supports, transmission positioning, or torque on specialized fasteners to achieve correct alignment.
Availability of clear installation instructions, access to replacement hardware, and whether the mount uses standard torque specifications all influence the time and tools required. Factor in the physical access in the engine bay and whether adjacent components must be removed during replacement.
How We Chose the Best Scion xB Engine Mount
We prioritized parts that offer correct fitment and reliable attachment to the Scion xB chassis, focusing on mounts designed to meet factory fit and orientation. Durability under stress was assessed by considering construction materials and design features that resist oil degradation, heat, and fatigue. Vibration isolation performance was a key filter because passenger comfort and component longevity depend on how well a mount dampens engine movement. Torque control and resistance to rotational movement under load were evaluated to ensure smooth power delivery and reduce driveline strain. Ease of installation and the availability of installation information were also considered since many owners or technicians will replace mounts in modestly equipped shops.We excluded parts that lacked clear vehicle-specific fitment data, mounts designed only for motorsport applications with excessive stiffness, and listings without verifiable material or construction details. The final selection focuses on items that balance isolation, durability, and correct torque management for typical Scion xB use.
Our full evaluation process is outlined in our review methodology.
FAQ
What are common symptoms of a failing engine mount on a Scion xB?
Common signs usually include increased vibration in the cabin, especially at idle, noticeable engine movement during acceleration or deceleration, and unusual clunking noises when shifting. You may also feel more drivetrain harshness or notice misalignment that affects throttle response. Symptoms often progress gradually and can vary with engine load and temperature.
Can I replace a Scion xB engine mount myself, and what tools are typically needed?
Many owners with basic mechanical skills can replace a mount, but the task often requires safely supporting the engine, a range of sockets and wrenches, and torque tools to secure fasteners correctly. Some situations need special tools for engine support or access. If you are unsure about safely supporting the engine or following torque procedures, professional help is advisable.
How long do engine mounts usually last on a Scion xB?
Lifespan depends on driving conditions, exposure to contaminants, and material quality, but mounts often last several years under normal use. Heavy urban driving, frequent short trips, or exposure to oil leaks and extreme temperatures can shorten service life. Regular inspection during routine maintenance helps detect early deterioration.
Will a stiffer mount improve performance or just increase noise and vibration?
A stiffer mount can reduce engine movement and improve perceived responsiveness under load, which some drivers prefer for a firmer feel. However, increased stiffness usually transmits more vibration and noise into the cabin. The right choice depends on whether you prioritize isolation and comfort or a more direct mechanical connection.
What should I consider about torque specifications when installing a mount?
Correct torque on fasteners ensures the mount secures properly without causing premature stress or allowing movement that leads to wear. Follow vehicle-specific torque values and tightening sequences to maintain alignment and avoid distortion of mounting brackets. Incorrect torque can lead to accelerated failure or safety issues.
Do signs of engine mount failure always mean the mount must be replaced immediately?
Not always, but progressive symptoms like increasing vibration, visible cracking, or oil-soaked material usually indicate replacement is needed soon. In some cases, temporary measures or inspection can verify if other components contribute to symptoms. Prompt attention helps prevent secondary damage to the drivetrain or adjacent parts.
Conclusion
When choosing a Scion xB engine mount, prioritize correct fitment, appropriate vibration isolation, and sufficient torque control for your driving style. Balance material durability against how much vibration you are willing to accept for stronger torque resistance.Consider installation complexity and long-term maintenance when deciding between designs. Regular inspection and addressing early symptoms will keep drivetrain stress low and extend the service life of surrounding components.
Explore More:
- Check out all Scion xB parts & accessories
- Explore Engine Mounts Maintenance & Repair Guides
- Explore Engine
- Browse all Auto Parts
