Note: This article contains affiliate links. If you click on these links and make a purchase, I may earn a small commission at no extra cost to you. This helps support my research and content. Read my full affiliate disclaimer here.
If your Nissan Versa feels rattly, shudders during acceleration, or transmits engine vibration into the cabin, a worn engine mount is often the cause. Picking the right Nissan Versa engine mount matters because fitment, material, and load capacity affect how the car drives, how long the repair lasts, and how much vibration and noise reach the passenger compartment. This guide covers seven shortlisted engine mounts chosen for their relevance to common Versa issues and explains the evaluation criteria used for selection. Read on to understand what to prioritize when replacing an engine mount and what to expect from the top contenders.
Looking for other parts? See all Nissan Versa parts & accessories.
Top Picks at a Glance
1. SCITOO Engine Mount and Torque Strut Mount Set for Nissan Versa (2009–2011)
| Fitment | Nissan Versa 2009-2011 |
|---|---|
| Mounting Type | Chassis Mount |
| Finish Type | Polished |
| Unit Count | 1.0 Count |
This SCITOO kit replaces the engine, transmission, and torque strut mounts specified for the Nissan Versa 2009–2011. It is intended as a direct-fit factory-replacement style solution to restore engine positioning and reduce vibration and drivetrain movement that appear when mounts age. The parts use rubber bonded to metal with a protective adhesive coating, which in practice helps resist solvent and heat breakdown and keeps vibration dampening consistent under normal driving. Install is typical for a mount kit and suits routine DIY swaps or shop replacements when worn mounts cause noise, harshness, or excessive engine movement. Buyers should note some users reported fitment quality variance, so careful verification against the Versa mounting points is advised before installation. The kit offers a budget-friendly alternative to dealer parts with decent durability, but results depend on correct fit and installation alignment to avoid premature wear.
Best for: A reliability-focused buyer who prioritizes restoring factory-level vibration control and drivetrain stability on a Nissan Versa 2009–2011 without the premium cost of dealer parts.
Less Ideal for: Buyers seeking guaranteed factory-fit precision without any adjustment or those wanting manufacturer-backed warranty support should consider dealer or brand-specific alternatives.
- Specifically listed to fit Nissan Versa 2009–2011, simplifying selection for that model
- Rubber-to-metal bonded construction intended to resist heat, solvents, and vibration degradation
- Covers engine, transmission, and torque strut mounts in one kit for coordinated replacement
- Economical alternative to factory dealer mounts for routine maintenance or repair
- Some buyers reported inconsistent fit with a portion of the kit requiring return or replacement
- Not all installs will match OEM fit tolerances which can require minor adjustments during installation
Verdict A cost-effective replacement mount kit aimed at restoring engine stability on Nissan Versa 2009–2011, but verify fit carefully before installation.
2. OCPTY Engine and Transmission Mount Set for Nissan Cube and Versa (4-piece)
| Fitment | Nissan Cube 2009-2014, Nissan Versa 2007-2012 L4 1.8L |
|---|---|
| Pieces included | 4-piece set (front right motor, front torque strut, rear torque strut, transmission) |
| Manufacturer | OCPTY |
| Part numbers referenced | A4312 A4318 A4320 A4323 |
This OCPTY kit supplies the four primary engine and transmission mounts needed when replacing worn mounts on Nissan Versa (2007–2012) and Cube (2009–2014) 1.8L models. The set includes front and rear torque strut mounts, a front right motor mount, and a transmission mount so you can replace all key mounting points at once rather than sourcing single parts. It is marketed for simple installation and is typically used by DIY owners or mechanics doing a full mount refresh to reduce vibration and restore engine alignment. Practical benefits include getting a complete matched set in one purchase and reducing vehicle shake when the parts fit and hold up. Limitations seen in user reports include inconsistent durability versus factory-quality parts and occasional early failures, so installers should inspect parts on delivery and be prepared for warranty or replacement if a unit fails shortly after installation.
Best for: Buyers who prioritize convenience and want a single kit to replace all major mounts at once, minimizing sourcing time and repeat orders for routine maintenance or a one-off repair.
Less Ideal for: Drivers who place the highest priority on long-term OEM-level durability and those who prefer factory-sourced parts for peace of mind should consider OEM replacements instead.
- Complete 4-piece kit replaces all major engine and transmission mounts in one purchase
- Sold as a matched set to simplify DIY or shop installation and reduce parts-matching issues
- Advertised for easy installation so a competent DIYer or independent mechanic can fit without specialized tools
- Reported inconsistency in long-term durability compared with factory-quality mounts
- Some customers experienced premature failure requiring additional replacement or rework
Verdict A convenient matched 4-piece replacement kit for Versa/Cube owners who want to replace all mounts at once, but expect variable durability compared with factory-quality parts.
3. A-Premium Engine and Transmission Mount Kit (Set of 4) for Nissan Versa / Cube 1.8L
| Vehicle fitment | Nissan Versa 2007-2012, Cube 2009-2014 L4 1.8L DOHC petrol |
|---|---|
| Package contents | Front right motor mount, front torque strut mount, rear torque strut mount, transmission mount |
| Manufacturer part number | APEM033 |
| Item model number | 11360-EL00A |
This kit replaces the front right motor mount, two torque strut mounts, and the transmission mount to restore engine support and reduce driveline movement on Nissan Versa and Cube 1.8L DOHC petrol engines. Typical use is a full mount refresh when worn mounts cause excess vibration, engine rock, or exhaust leaks under the hood. Notable features include a matched set that covers the main mounting locations and manufacturing controls that the seller says meet or exceed factory-quality standards. In practice the kit can tighten up engine movement and make idling and acceleration feel smoother after installation, and buying all four pieces at once avoids mixing old and new mounts. Limitations reported by users include occasional defective parts out of the box and variable longevity compared with OEM replacements, so careful inspection at install and retaining the warranty paperwork are sensible. Professional installation is recommended if you are not experienced, since correct torque and alignment affect noise and vibration outcomes.
Best for: Performance-oriented owners who prioritize restoring tight engine control and reducing driveline movement on a Nissan Versa 2007–2012 or Cube 2009–2014 with a 1.8L engine; ideal for DIYers or shops replacing all mounts at once to regain factory-like response.
Less Ideal for: Drivers seeking a guaranteed OEM-level lifespan without any risk of early failure or those who prefer one-off component replacement rather than a full kit should consider alternatives.
- Complete four-piece kit covers front right motor mount, front and rear torque strut mounts, and transmission mount
- Sold as a matched set to avoid compatibility mismatches when replacing multiple mounts
- Manufacturer states parts are produced and tested to meet or exceed factory-quality standards
- Includes common reference/part numbers for straightforward fitment verification
- Some buyers reported defective or short-lived mounts in individual units
- Quality and stiffness can vary vs factory mounts which may affect NVH in cold climates
Verdict A convenient matched four-piece mount kit that can restore engine stability and feel on the Versa/Cube but inspect parts at install because quality has shown some variability.
4. Partuto Front Right Engine Motor Mount for Nissan Versa / Versa Note / Micra
| Position | Front Right |
|---|---|
| Material | Aluminum, Steel, Rubber |
| Compatible Engines | L4 1.6L models listed |
| Fitment Notes | Automatic transmission only |
This front right engine motor mount replaces the factory mount on compatible Nissan Versa, Versa Note, and Micra models with automatic transmissions. It is built from aluminum, steel, and rubber to absorb engine torque and reduce vibration while holding the engine in place during normal driving. Typical use is a direct replacement for a worn or broken passenger-side mount to restore smoother idle, lessen drivetrain movement, and prevent excess noise. The unit lists specific OEM reference numbers to aid fitment and ships as a single passenger-side mount. Practical benefits include straightforward swap-in installation for someone familiar with basic engine-bay work and a budget-friendly alternative to dealer parts. Important limitations are that it is for automatic transmissions only and this is a single mount so related mounts may also need inspection or replacement for best results. Fitment confirmation by year and engine before purchase is necessary to avoid installation issues.
Best for: Budget-conscious owners seeking an affordable, straightforward replacement to restore engine stability and reduce vibration on a Nissan Versa, Versa Note, or Micra with automatic transmission.
Less Ideal for: Drivers who prioritize premium or OEM-branded parts, those with manual transmissions, or buyers who want a multi-mount overhaul kit should consider other options.
- Designed to match factory fit for the passenger front position on specified Nissan models.
- Constructed from aluminum, steel, and rubber to balance strength and vibration damping.
- Sold as a single direct-replacement unit for quick repair of a failed passenger-side mount.
- Compatible only with automatic transmission models and will not fit manual-transmission vehicles.
- Only the passenger-side mount is included so other worn mounts are not addressed by this purchase.
Verdict A cost-effective passenger-side replacement that restores engine stability on the specified Nissan automatic models but is limited to the single mount and automatic transmissions.
5. Advance Ignition Engine and Transmission Mount Set for Nissan Kicks/Versa (3‑Piece)
| Brand | Advance Ignition Technology |
|---|---|
| Model | TC-M5027 |
| Compatible Vehicles | 2017–2022 Nissan Kicks 1.6L CVT; 2020–2021 Nissan Versa 1.6L CVT |
This three-piece mount kit replaces the rear torque strut, right hydraulic engine mount, and left transmission mount for compatible 1.6L Nissan Kicks and Versa models with CVT. It is used to restore factory-style engine positioning, reduce vibration and engine movement, and prevent added strain on drivetrain components that results from worn mounts. The set is marketed as a direct replacement with parts listed to match common factory part numbers, which makes it straightforward for a mechanic or competent DIYer to fit during a repair. Benefits include returning engine dampening and reducing noise, which can improve shifting feel and prevent premature wear to related parts. Limitations are the usual ones for aftermarket mount sets: fitment must match the specified years and engine/transmission combination, and buyers should confirm exact part numbers before installation. The kit does not include installation hardware or instructions beyond standard expectations, so professional installation is recommended if you are not experienced.
Best for: Risk-averse mainstream buyers looking for a direct, factory-style replacement to restore quiet operation and reliable engine support after mount wear; ideal for owners who prioritize correct fitment and predictable performance.
Less Ideal for: People needing universal or multi-vehicle coverage, or those seeking a performance-oriented polyurethane or specialty mount for increased engine movement control.
- Three-piece kit covers torque strut, right engine mount, and left transmission mount for a complete front driveline refresh
- Listed to match common factory part numbers for straightforward replacement
- Designed to restore engine stability and reduce vibration and noise
- Sold as a matched set which avoids sourcing separate parts individually
- Compatibility limited to specific 1.6L CVT Nissan Kicks (2017–2022) and Versa (2020–2021) US models
- No explicit mention of included installation hardware or detailed instructions
Verdict A practical three-piece factory-style replacement kit to restore engine stability and reduce vibration for the specified Nissan Kicks and Versa models.
6. YOUYIEN Engine and Transmission Mount Kit (3-piece) for Nissan Versa 2012–2017 / Versa Note 2014–2017 1.6L
| Fitment | Nissan Versa 2012-2017; Versa Note 2014-2017 1.6L |
|---|---|
| Unit Count | 3.0 Count |
| Mounting Type | Front Mount |
| Finish Type | Powder Coated |
This three-piece mount kit replaces the front engine mount, low torque strut, and transmission mount for Nissan Versa 2012–2017 and Versa Note 2014–2017 1.6L. It is used to replace aged or damaged mounts that cause engine vibration, drivetrain misalignment, and noise. The parts are powder coated and described as iron, aluminum, and rubber construction to manage engine torque and dampen vibration. In real use the kit can noticeably reduce idle and shift vibration when the mounts seat correctly and are installed with proper alignment. Several buyers report an OEM-like fit and easier installation compared with dealer parts, which makes it a practical repair option for DIYers and budget-conscious shops. Quality reports are mixed though; some users found the mounts durable and effective while a few experienced excessive engine movement after installation, indicating variability in part tolerances or batch quality. Expect a lower cost alternative to factory replacements that generally restores comfort but may not match long-term durability of higher-end units.
Best for: Practical optimizers seeking a cost-effective repair that balances price and function for routine maintenance or DIY replacement on a Nissan Versa 2012–2017 or Versa Note 2014–2017 1.6L.
Less Ideal for: Drivers who prioritize maximum long-term durability or who prefer dealership-sourced factory-quality parts should consider higher-end or OEM options instead.
- Complete three-piece kit covers front engine mount, low torque strut, and transmission mount for a single repair job
- Powder coated metal components aim to resist corrosion and provide a finished appearance
- Multiple reviews cite easy installation and a close fit to factory mounting points
- Lower-cost alternative to factory replacement parts that can restore comfort and reduce vibration
- Some buyers report inconsistent quality with units that allow excess engine movement after fitting
- Not every set lasted long-term for all users, suggesting variable durability between batches
Verdict A budget-friendly, three-piece mount kit that can restore comfort and alignment on applicable Nissan Versa models but with some variability in long-term quality.
7. LOONGRIE Engine Motor Mounts Set of 4 for 2012–2019 Nissan Versa/Versa Note 1.6L
| Compatible vehicles | 2012-2019 Nissan Versa/Versa Note 1.6L, 2014 Nissan Note |
|---|---|
| Unit count | 4 |
| Manufacturer | loongrie |
| Model | LG013 |
This LOONGRIE set supplies the four engine mounts needed when worn mounts cause vibration or drivetrain movement on 2012–2019 Nissan Versa and Versa Note 1.6L models. The mounts are metal with bonded rubber and come as a complete set so you can replace all mounting points in one job. In use they align with the factory bolt locations and several owners report straightforward bolt-up installation without modifications. The bonded rubber cushions engine movement and reduces vibration when the parts are in good condition, and the kit references the factory part numbers for fit confirmation. The kit is a budget-friendly aftermarket option, but build quality varies by piece and some reviewers noted a firmer-than-factory feel that can transmit more vibration into the cabin. If you want a cost-effective way to restore engine stability and eliminate clunking, this set does the job, though drivers seeking an exact factory match for NVH may prefer a different brand or an OEM replacement.
Best for: Balanced buyers who want a complete, lower-cost replacement to restore engine stability and reduce clunks without buying individual OEM parts, suitable for routine home or shop repairs.
Less Ideal for: Drivers prioritizing exact factory NVH characteristics or long-term durability above price should consider factory-quality replacements or higher-end aftermarket brands.
- Sold as a complete four-piece kit so all mounts can be replaced at once
- Designed to match listed Nissan Versa/Versa Note 1.6L factory part numbers for straightforward fitment
- Bonded metal and rubber construction restores engine support and reduces excessive movement
- Many users report easy installation and correct alignment with factory bolt points
- Aftermarket build quality can vary and some units feel firmer than factory mounts
- Firmer mounts may transmit more vibration and cabin noise compared with factory-style units
Verdict A budget-friendly four-piece replacement kit that restores engine support on Nissan Versa/Versa Note but may feel firmer and transmit more vibration than factory mounts.
Choosing the Right Nissan Versa Engine Mount: Key Factors to Consider
Compatibility and Fitment
Correct compatibility with the Nissan Versa model year and engine type is the most important consideration. A mount that does not match the vehicle's mounting points or torque specifications can cause misalignment, premature wear, or drivetrain strain.
Verify OEM-style mounting hole patterns, bracket orientation, and bolt sizes before purchase. Compatibility ensures the mount transfers loads as designed and reduces the risk of additional repairs caused by improper fit.
Material and Construction
Engine mounts are commonly made from solid rubber, hydraulic designs, or combinations with metal reinforcement. Material choice affects vibration isolation, durability, and how the mount responds to engine torque.
Rubber mounts are simple and cost-effective but may harden and crack over time. Hydraulic or fluid-filled mounts can offer superior damping for harsh vibrations, while reinforced metal brackets improve structural resilience under load.
Vibration Damping Performance
One of the primary roles of an engine mount is to reduce engine vibration transmitted to the chassis and cabin. The mount's damping characteristics determine how noticeable idle shake, acceleration shudder, and road-induced vibrations will be.
Consider mounts rated for enhanced vibration control if you prioritize a quieter ride. Keep in mind that stiffer mounts reduce movement but can increase noise and harshness, so choose a balance that suits your driving priorities.
Durability and Wear Resistance
Durability depends on materials, bonding quality, and resistance to heat, oil, and road contaminants. A mount exposed to high underhood temperatures or oil leaks will degrade faster if materials are not engineered for those conditions.
Look for features such as reinforced brackets, corrosion-resistant hardware, and bonded mounting faces that resist delamination. Durability impacts how long the mount will perform reliably and how often you may need to service it.
Load Capacity and Torque Handling
Engine torque and vehicle weight place dynamic loads on mounts during acceleration, deceleration, and cornering. A mount must handle these forces without excessive sag or movement that can cause driveline strain.
Check specifications for rated load or torque capacity where available, and prefer mounts designed for the engine output and typical driving conditions of the Nissan Versa. Proper load handling helps maintain alignment and reduces secondary wear on other components.
Serviceability and Installation
Ease of installation affects both cost and the likelihood of a correct repair. Features that aid serviceability include provisioned or included hardware, pre-applied thread treatments, and designs that allow safe vehicle lifting and engine support during replacement.
Also consider whether the mount requires special tools or alignment procedures. Simpler, well-documented installations reduce labor time and the chance of installation errors that could shorten mount life.
FAQ
What are common symptoms of a failing engine mount?
Common signs include increased engine vibration in the cabin, noticeable clunks or knocks during acceleration or shifting, and visible movement of the engine under load. Some symptoms depend on the mount location and the type of failure, so a combination of vibration and mechanical noise often indicates a mount issue.
Can I replace a Nissan Versa engine mount myself?
Many mounts can be replaced by a competent DIYer with basic tools, an engine support method, and clear instructions. However, some mounts require engine support or access that makes the job more complex. If you are unsure about safely supporting the engine or torqueing bolts to specification, professional installation is advisable.
How long do engine mounts typically last?
Lifespan varies widely depending on driving conditions, exposure to heat or oil, and mount material. Engine mounts often last several years under normal driving, but severe conditions such as frequent short trips, high heat, or oil exposure can shorten life. Regular inspection helps catch deterioration early.
Will a stiffer mount improve performance?
A stiffer mount can reduce engine movement and improve throttle response feel by limiting torque-induced movement. However, it usually transmits more vibration and noise into the cabin. Whether this is desirable depends on whether you prioritize NVH comfort or sharper drivetrain feel.
What should I check before buying a replacement mount?
Verify fitment to your specific Nissan Versa model year and engine, confirm bolt pattern and bracket orientation, and review the mount's material and damping characteristics. Also check whether replacement hardware or specific torque specs are required for installation.
Can a bad engine mount cause other damage?
Yes, excessive engine movement from a worn mount can stress hoses, wiring, exhaust connections, and drivetrain components. Over time, this added movement can accelerate wear on adjacent parts, so addressing a failing mount promptly helps prevent secondary damage.
How We Chose the Best Nissan Versa Engine Mount
We narrowed the field by focusing on criteria that directly affect performance and fitment on the Nissan Versa. Primary filters included correct chassis and engine compatibility, material construction such as rubber versus hydraulic designs, and rated load capacity to ensure the mount can handle torque and idle forces. We also evaluated build quality indicators like corrosion-resistant hardware and reinforced brackets, plus customer-reported longevity and resistance to common failure modes. Ease of installation and availability of replacement hardware were considered to reflect real-world serviceability. Finally, we excluded lightweight universal mounts and products lacking clear fitment documentation or applicable vehicle-specific specifications. The resulting list emphasizes mounts that balance durability, vibration control, and practical installation for the Versa.
Our full evaluation process is outlined in our review methodology.
Conclusion
Choosing the right Nissan Versa engine mount means balancing vibration control, durability, and correct fitment. Prioritize mounts that explicitly match your model year and engine, offer the damping characteristics you prefer, and use materials suited to underhood conditions. Keep in mind tradeoffs such as stiffer mounts increasing cabin vibration while softer or hydraulic designs improve comfort. Good fitment and proper installation will extend mount life and reduce the chance of collateral wear on nearby components.
Explore More:
- Check out all Nissan Versa parts & accessories
- Explore Engine
- Browse all Auto Parts
