Note: This article contains affiliate links. If you click on these links and make a purchase, I may earn a small commission at no extra cost to you. This helps support my research and content. Read my full affiliate disclaimer here.
If your Sentra feels rattly, vibrates at idle, or transmits extra movement during acceleration, a worn engine mount is often the culprit. Choosing the right Nissan Sentra engine mount matters because mount design and material affect ride comfort, drivetrain alignment, and long-term wear. This guide covers our short list of the top options for this vehicle and explains the evaluation criteria we used, including durability and noise isolation. Read on to see which mounts made the cut and what to consider before you replace one.
Looking for other parts? See all Nissan Sentra parts & accessories.
Top Picks at a Glance
1. AM Autoparts Engine Mount Front Right Passenger Side for Nissan Sentra 2.0L
| Vehicle Compatibility | 2007-2012 Nissan Sentra L4 2.0L Front Passenger Side |
|---|---|
| Manufacturer Part Number | AM-4282079375 |
| UPC | 192659160379 |
This AM Autoparts front right engine mount is a direct-replacement for 2007–2012 Nissan Sentra 2.0L passenger-side applications. It arrives pre-assembled to match the factory mounting points so installation requires minimal modification and is typical for a DIY swap or quick shop job. In use it isolates engine vibration and helps maintain alignment under torque, restoring the stable, quiet feel you expect from a good motor mount. The listing cites common reference numbers and shows multiple positive owners reports of good fit and reduced vibration after installation. Important limitations are that long-term durability depends on driving conditions and installation quality, and this is a single-side part so you may need additional mounts if multiple units are worn. For a reliability-minded owner this delivers the functional replacement you need without upgrades or added features.
Best for: Reliability-focused buyers who prioritize restoring factory-level drivability and vibration control on a Nissan Sentra 2.0L without modifying the vehicle, and who prefer straightforward, time-saving replacements.
Less Ideal for: Users seeking upgraded performance mounts for aggressive driving or track use should consider performance-oriented alternatives rather than this factory-style replacement.
- Direct-fit design for 2007–2012 Nissan Sentra 2.0L passenger side reduces installation time
- Pre-assembled unit removes the need for on-car assembly and simplifies replacement
- Positive owner reports of improved vibration control and precise fit
- No long-term durability data provided beyond short-term reviews
- Sold as a single mount so replacing other worn mounts requires separate purchases
Verdict A straightforward, direct-fit passenger-side replacement that restores factory-style vibration control for 2007–2012 Nissan Sentra 2.0L owners focused on reliability.
2. Yllhaoyuan Complete 4‑Piece Engine Mount Kit for 2007–2012 Nissan Sentra 2.0L
| Fitment | 2007–2012 Nissan Sentra 2.0L |
|---|---|
| Mounting Type | Chassis Mount |
| Manufacturer | Yllhaoyuan |
| Includes | Complete set of 4 mounts |
| Cross-reference | A4348, A4345, A4318, A4346 |
This kit supplies the four mounts needed to restore proper engine support and vibration control on a 2007–2012 Nissan Sentra 2.0L. Intended as a direct factory-quality replacement, the set covers front and rear engine mounts plus transmission mounts so you can replace the entire mounting system at once instead of sourcing parts separately. Buyers report the parts generally line up with factory locations and reduce engine vibration and noise when installed correctly, making the Sentra drive more settled. Construction is aimed at OEM-level durability and the kit is offered with cross-reference part numbers for fit verification. Expect a mix of experiences: many users find fit and finish acceptable and describe quick installations, while a minority report poor machining or mismatched holes that required extra work or replacement. This makes the kit a practical option for a convenience-focused DIYer or mechanic who wants one package to address worn mounts, but be prepared to inspect each piece on delivery and have basic tools and replacement fasteners available if minor adjustments are necessary.
Best for: Buyers prioritizing convenience who want a single kit to replace all worn mounts on a Sentra and prefer a ready-made solution that saves time sourcing individual parts.
Less Ideal for: Customers seeking guaranteed perfect factory-level fit without any inspection or those unwilling to address minor fitment or machining issues should consider dealer-sourced factory replacement parts instead.
- Complete kit replaces all engine and transmission mounts in one purchase reducing multiple orders
- Designed to match factory fit and cross-referenced to common aftermarket part numbers for easier verification
- Reported to noticeably reduce vibration and engine movement when correctly installed
- Some customers reported manufacturing defects or misdrilled holes that required rework or replacement hardware
- Quality control appears inconsistent so parts inspection on arrival is recommended
Verdict A convenient all-in-one replacement kit for 2007–2012 Sentra owners that can restore ride smoothness quickly but check each part on arrival for fitment issues.
3. A-Premium 3-Piece Engine and Torque Strut Mount Kit for Nissan Sentra 2007–2012 2.0L
| Vehicle fitment | Nissan Sentra 2007-2012 L4 2.0L DOHC, Automatic CVT |
|---|---|
| Package contents | Front right motor mount, front torque strut mount, rear torque strut mount |
| Manufacturer | PremiumpartsWhosale |
| Brand | A-Premium |
This A-Premium kit supplies the front right motor mount plus two torque strut mounts intended as direct factory-quality replacements for Nissan Sentra 2007–2012 2.0L CVT cars. It is typically used to replace worn mounts that cause vibration, engine movement under load, or transmission torque steer. The set is advertised as tested to meet factory specifications and includes the three most commonly failing mount positions so you can address front-end engine isolation in one job. In practice the parts let the engine sit firmer, reduce idle shake, and restore drivetrain alignment, especially under acceleration. Installation requires basic mechanical experience and common tools; one reviewer noted purchasing a couple of extra bolts for one side, so check fasteners before starting. The kit comes with a one-year unlimited-mileage guarantee which adds confidence, but it does not include hardware beyond the mounts themselves and fit is limited to the specified Sentra model and transmission, so confirm vehicle match before buying.
Best for: Performance-oriented buyers who prioritize restoring factory-level engine stability and minimizing vibration in their Nissan Sentra 2007–2012 2.0L CVT for a more controlled driving feel.
Less Ideal for: Drivers looking for a universal or multi-vehicle solution or those who need a kit that includes all fasteners and hardware should consider other options.
- Three-piece kit covers front right motor mount plus both torque strut mounts for a coordinated repair
- Engineered and tested to meet factory-spec performance for reduced vibration and firmer engine support
- Designed specifically for Nissan Sentra 2007–2012 2.0L with automatic CVT to simplify fitment
- Includes a one-year unlimited-mileage guarantee for added buyer confidence
- Does not include additional mounting hardware which may be needed for some installations
- Fitment is restricted to the listed Sentra model and transmission so it is not universal
Verdict A focused, factory-spec three-piece mount kit for Sentra owners who want to eliminate vibration and restore firm engine control, provided you confirm fitment and supply any missing hardware.
4. PAROD Engine Mount Kit for Nissan Sentra 2007–2012 2.5L (A4351/A4352)
| Vehicle fitment | Nissan Sentra 2007-2012 2.5L L4 |
|---|---|
| Includes | Front upper torque strut mount A4351 and front lower torque strut mount A4352 |
| Manufacturer | PAROD |
This PAROD kit supplies the front upper and lower torque strut mounts (A4351 and A4352) as a direct-fit aftermarket replacement for the Nissan Sentra 2007–2012 with the 2.5L engine. Installed where the factory torque mounts sit, these parts reduce engine movement, transmit less vibration into the cabin, and restore correct engine positioning for smoother shifting and throttle response. The kit is marketed as vehicle-tested and built to meet factory-quality performance while undercutting dealer-priced options, so it is suitable for DIY replacement during routine maintenance or when worn mounts cause clunks or excess vibration. Practical benefits include receiving both upper and lower mounts together and simpler sourcing compared with buying parts individually. Limitations are typical for value aftermarket parts: long-term durability may vary with driving style, and professional verification of fit is advised if the Sentra has aftermarket engine modifications. Expect a cost-effective replacement that handles normal daily driving well but may not match heavy-duty or performance-grade mounts.
Best for: Budget-conscious owners who prioritize an affordable, straightforward replacement to restore factory-like drivability and reduce vibration in daily-driven Nissan Sentra 2007–2012 2.5L sedans.
Less Ideal for: Drivers who use their Sentra for performance driving, towing, or engines with modifications that increase torque should look for performance-grade mounts instead.
- Includes both front upper and lower torque strut mounts for a complete front-mount replacement
- Sold as a vehicle-specific fit for Nissan Sentra 2007–2012 2.5L which simplifies compatibility
- Positioned as factory-quality performance at a lower cost than dealer parts
- Vehicle-tested claim suggests fit and function comparable to factory replacements for everyday driving
- Durability and lifespan may be shorter than premium or heavy-duty aftermarket mounts under aggressive use
- Not marketed for high-performance or heavily modified engines where stronger mounts are required
Verdict A cost-effective, vehicle-specific replacement kit that restores engine stability and reduces vibration for everyday Nissan Sentra 2.5L owners, but not intended for performance or heavy-duty use.
5. Yllshengyu 4-Piece Engine and Transmission Mount Kit for Nissan Sentra 2013–2019 1.8L
| Vehicle fitment | Nissan Sentra 2013-2019 1.8L |
|---|---|
| Unit count | 4-piece mount set |
| Manufacturer | Yllshengyu |
| Replaces part numbers | A7382, A7376, A4360, A4374, 113601KA0A, 113503SG0A, 112201KG0A, 112101KC0B |
This Yllshengyu kit supplies the four mounts you need to restore factory-style engine support on a Nissan Sentra 2013–2019 with the 1.8L engine. The set includes the rear torque strut, transmission mount, front lower torque strut, and front right engine mount so you can address worn mounts in a single job rather than sourcing parts separately. The listings state high-density rubber and solid brackets engineered to meet or exceed factory specification, which translates to reduced vibration, quieter cabin feel, and more stable engine alignment after installation. Buyers report straightforward fitment to the Sentra and clear improvement in vibration and harshness when mounts are replaced as a set. Expect typical DIY installation steps and some tight fastener access on lower torque mounts. Quality reports are mixed: many users find the parts perform like factory replacements for a budget option while a minority report shorter lifespan than OEM. For a risk-averse buyer prioritizing predictable compatibility with the Sentra and immediate NVH improvement, the kit is practical, but monitor longevity if you need a long-term, high-mileage solution.
Best for: Risk-averse mainstream buyers who want a single, compatible replacement kit to restore factory-like NVH and drivability on a Nissan Sentra 2013–2019 1.8L without hunting for individual parts.
Less Ideal for: Drivers seeking a long-term heavy-duty or performance upgrade for high-mileage or extreme-duty use should consider premium or reinforced mounts from specialist brands instead.
- Complete four-piece set covers rear torque strut, transmission mount, front lower torque strut, and front right engine mount so all worn mounts can be replaced at once
- Designed to fit Nissan Sentra 2013–2019 1.8L, simplifying compatibility and reducing guesswork
- Construction uses high-density rubber and solid brackets intended to match or exceed factory alignment and vibration control
- Some users report durability issues compared with OEM over long-term high-mileage use
- Lower-priced aftermarket finish and fitment tolerances may vary part-to-part
Verdict A convenient, vehicle-specific four-piece kit that restores factory support and reduces vibration on the Sentra, offered as a budget-friendly replacement with mixed long-term durability reports.
6. LOONGRIE Engine and Transmission Mount Kit (Set of 4) for 2013–2019 Nissan Sentra 1.8L
| Compatible vehicles | 2013–2019 Nissan Sentra L4 1.8L |
|---|---|
| Unit count | 4 |
| Manufacturer | loongrie |
| Model | LG052 |
This LOONGRIE mount kit supplies the four mounts needed when replacing worn engine and transmission brackets on a 2013–2019 Nissan Sentra with the 1.8L engine. Intended as a direct factory-quality replacement, the kit is used during routine mount failure repairs to restore engine alignment, reduce vibration, and eliminate clunks under acceleration or when shifting. Customers report straightforward installation and good fitment for Sentra applications, and the kit includes reference to the factory part numbers for verification. The practical benefit is a complete set that lets you swap all aging mounts at once rather than mixing old and new parts, which helps maintain consistent NVH and driveline behavior. Some buyers note minor variation in individual piece quality, so have a mechanic check torque specs and inspect bushings after installation. The product comes from an aftermarket brand that emphasizes quality control but is not a branded OEM part, so long-term durability may vary with driving conditions and installation quality.
Best for: Practical owners who want a cost-effective, single-purchase solution to replace all worn mounts on a 2013–2019 Sentra 1.8L and prioritize restoring drivability without overspending.
Less Ideal for: Buyers who prioritize guaranteed factory-brand longevity or who prefer dealer-sourced parts for warranty continuity should consider Nissan-branded replacements.
- Complete four-piece kit covers all engine and transmission mounts for the listed Sentra 1.8L years
- Advertised as a direct factory-quality replacement with factory part number references for fit verification
- Users report easy fit and straightforward installation when following standard procedures
- Replaces worn mounts at once to restore engine positioning and reduce vibration/noise
- Aftermarket manufacture means build consistency can vary between pieces
- Not a branded Nissan part so long-term lifespan may differ from factory replacements
Verdict A practical, budget-friendly full mount kit that restores NVH and driveline stability on 2013–2019 Sentra 1.8L models, with typical aftermarket variability in long-term durability.
7. sherxibo Engine Motor Mount & Transmission Mount Kit for Nissan Sentra / Rogue
| Compatible Models | Nissan Sentra 2007-2012 2.5L |
|---|---|
| Set Contents | Front upper torque strut, front right motor mount, rear lower torque strut, transmission mount |
| Manufacturer | sherxibo |
This sherxibo mount kit replaces the front upper torque strut, front right motor mount, rear lower torque strut, and transmission mount for Nissan Sentra 2.5L applications and related Rogue fitments. It is typically used when worn mounts cause excess vibration, engine movement, or clunking during acceleration and shifting. The set maps to several Nissan part numbers listed for direct-fit replacement, so installation is the usual bolt-in process for someone with basic mechanical skills or a shop. Buyers report the kit noticeably reduces vibration and smooths idling and high-speed stability. Practical benefits include restoring factory-aligned engine positioning and improving transmission feel without needing multiple separate purchases. Limitations are that some units may require minor trimming or adjustment during installation and long-term durability versus higher-cost factory-quality mounts is uncertain; if a vehicle has extensive corrosion or altered subframes the fit could be more challenging. The kit is a solid value for Sentra owners who want a full mount refresh in one purchase.
Best for: Balanced buyers who want a single replacement kit to restore Sentra drivability and reduce vibration without sourcing individual mounts.
Less Ideal for: Owners seeking factory-brand mounts for maximum longevity or those with heavily corroded mounting points who should consult a shop before buying.
- Complete four-piece kit covers engine torque struts and transmission mount for a single purchase
- Lists multiple Nissan replacement part numbers for direct-fit guidance
- Reported to significantly reduce engine vibration and improve idle/high-speed smoothness
- Works with common hand tools and can be installed by a competent DIYer or mechanic
- Some pieces may need minor trimming or adjustment to fit perfectly on certain vehicles
- Long-term durability compared with factory-quality mounts is not guaranteed
Verdict A convenient, cost-effective four-piece mount kit that restores Sentra engine stability and reduces vibration, with the usual DIY caveats about fit and long-term durability.
Choosing the Right Nissan Sentra Engine Mount: Key Factors to Consider
Material and Construction
Mount material determines how the unit absorbs vibration and handles loads. Rubber compounds offer good vibration isolation but can degrade from heat and oil exposure; bonded or reinforced rubbers extend life. Hydraulic mounts use fluid chambers to dampen oscillation and often reduce low-frequency vibration more effectively.
Construction quality, such as bonded interfaces and corrosion-resistant metal brackets, affects longevity. Look for designs that protect elastomers from direct exposure to engine fluids and heat. A well-constructed mount balances durability with the level of NVH control you need.
Vibration Isolation and NVH Performance
How a mount isolates vibration influences cabin comfort and perceived engine harshness. Softer mounts typically reduce vibration transfer at idle and light throttle but may allow more engine movement under load. Firmer mounts limit movement for a more connected feel but can transmit more vibration through the chassis.
Consider what matters most: a smooth, quiet ride or tighter engine control. For drivers bothered by engine mount symptoms vibration or increased noise during acceleration, prioritize mounts with proven damping features.
Fitment Accuracy and Compatibility
Correct fitment ensures proper alignment of the engine and transmission to the chassis. A mount that matches the Nissan Sentra's mounting points makes installation straightforward and avoids undue stress on adjacent components. Poorly fitting mounts can create new wear patterns, accelerate failure, or require additional adjustments.
Verify that bolt patterns, stud sizes, and bracket geometries match the vehicle. Compatibility also covers whether the mount is intended for the correct engine and transmission combination used in your Sentra.
Durability and Resistance to Contaminants
Engine compartments expose mounts to heat, oil, coolant, and road grime. Mounts made from materials resistant to oils and elevated temperatures will last longer. Reinforcements or protective coatings on metal parts reduce corrosion and extend service life.
Durability matters because replacing mounts can be labor intensive. Choosing a mount designed to resist common contaminants reduces the likelihood of premature replacement and keeps vibration and alignment stable over time.
Installation Complexity and Serviceability
Some mounts are direct replacements that use existing fasteners and straightforward engine support methods. Others may require engine support bars, transmission jacks, or removal of nearby components, increasing labor time. If you plan to do the work yourself, consider how accessible the mount is and whether special tools are needed.
Serviceability also covers whether replacement hardware is included and if the mount allows reuse of factory bolts. Lower installation complexity can reduce the chance of installation errors that affect performance.
Intended Use and Driving Style
Your driving habits influence the best mount choice. Daily commuting with an emphasis on comfort favors mounts that prioritize vibration isolation and NVH reduction. Drivers who push the car hard or perform spirited driving may prefer firmer mounts that reduce engine movement and maintain drivetrain responsiveness.
Also consider mileage and whether you expect to keep the car long term. Higher-mileage vehicles often benefit from more durable constructions that handle ongoing stress without sacrificing too much comfort.
FAQ
What are common symptoms of a failing engine mount on a Nissan Sentra?
Common signs include increased vibration at idle, clunks or bangs during acceleration or deceleration, and noticeable engine movement when shifting. You may also notice more engine noise transmitted into the cabin. These symptoms often depend on which mount is worn and how severe the deterioration is.
Can I drive safely with a bad engine mount?
Driving short distances with a worn mount is usually possible, but it may cause additional wear on surrounding components and create unsafe conditions if the mount fails suddenly. Address symptoms early to avoid more extensive drivetrain or exhaust damage and to maintain predictable vehicle handling.
How does installation difficulty vary between engine mounts?
Installation difficulty depends on the mount location and whether the mount is a direct fit. Some mounts are easily accessible and swap into place using common tools and engine support, while others require removing ancillary parts or using special supports. Expect more labor when the mount is hard to reach or when alignment procedures are required.
Are aftermarket mounts as reliable as OEM for the Nissan Sentra?
Aftermarket mounts can be reliable if they use quality materials and match factory fitment specifications. Reliability often depends on the manufacturer and construction quality. Look for mounts with clear fitment data and materials that resist heat and oil for longer service life.
What maintenance helps prolong engine mount life?
Avoid oil leaks and address them promptly since oil can degrade rubber components. Keep the engine bay clean and inspect mounts periodically for cracks, excessive movement, or corrosion. Replacing worn mounts before they fail can prevent collateral damage to engine accessories or the exhaust.
How do I know which mount is causing a problem?
Diagnosing which mount is at fault often involves visual inspection for cracks or separation, and observing engine movement while a helper revs the engine in park with the brakes engaged. A mechanic can also perform targeted tests by supporting the engine and checking for play at specific mount locations. Symptoms and movement patterns usually indicate which mount needs attention.
How We Chose the Best Nissan Sentra Engine Mount
We filtered candidate engine mounts for the Nissan Sentra by focusing on durability, vibration isolation, fitment accuracy, and ease of installation. We prioritized mounts constructed from proven elastomers or hydraulic designs that balance firmness with noise and vibration dampening. Fitment accuracy and correct attachment points were required to reduce extra drivetrain stress and ensure safe alignment. We also evaluated installation factors such as whether mounts use common fastener patterns, require special tools, or demand engine support procedures that increase labor complexity. Longevity indicators included material ratings and design features that limit oil contamination and premature fatigue. Noise isolation and NVH performance were judged based on how effectively mounts reduce idle and acceleration vibration. We excluded options that lacked clear vehicle-specific fitment information or had unverified durability claims. Mounts that required major vehicle modifications or altered engine geometry were also left out. The remaining choices reflect a balance of long-term reliability, vibration control, and realistic installation effort for Nissan Sentra owners.
Our full evaluation process is outlined in our review methodology.
Conclusion
Choosing the right Nissan Sentra engine mount comes down to balancing vibration control, durability, and installation complexity. Prioritize mounts that offer good NVH performance and are constructed to resist heat and oil if cabin comfort and long service life matter most. If you value tighter engine control, consider firmer designs but be aware they may transmit more vibration. Factor in fitment accuracy and the expected installation effort when making a final decision.
Explore More:
- Check out all Nissan Sentra parts & accessories
- Explore Engine
- Browse all Auto Parts
