Note: This article contains affiliate links. If you click on these links and make a purchase, I may earn a small commission at no extra cost to you. This helps support my research and content. Read my full affiliate disclosure here.
Choosing the right engine mount for your Nissan Frontier matters for ride comfort, drivetrain longevity, and safe handling. A faulty or poorly matched mount can transfer extra vibration into the cabin, increase wear on the transmission and axles, and affect shifting feel.This guide highlights the top shortlisted engine mounts selected for fit and vibration control. You will find why each option made the list and the evaluation criteria used to judge them, including fitment accuracy and isolation performance. Read on to find mounts suited to different priorities and installation contexts.
Looking for other parts? See all Nissan Frontier parts & accessories.
Top Picks at a Glance
| Best Overall The best all-around choice for most situations | ApplianPar Front Driver and Passenger Engine Mounts for Nissan Frontier and Compatible 4.0 Vehicles |  |
| Best Quality Built to a higher standard if you want something more solid | Nissan Front Engine Mount 11220-1PE0B (Genuine Nissan) |  |
| Best Budget The cheapest option that still gets the job done reliably | Advance Ignition Front Engine Motor Mount for Nissan Frontier 2005–2012 |  |
| Most popular A crowd favorite that many people choose with confidence | TRQ 2-Piece Engine Mount Set for Nissan Frontier / Xterra (3.3L V6) |  |
| Best Seller A high-volume bestseller chosen again and again | A-Premium Front Left and Right Engine Motor Mount Kit (2 pieces) |  |
1. ApplianPar Front Driver and Passenger Engine Mounts for Nissan Frontier and Compatible 4.0 Vehicles
| Manufacturer | ApplianPar |
|---|---|
| Model | 11220-ZG90A |
| Applicable Engines | 3.8 4.0 (specified Nissan models) |
| Compatible Vehicles | Frontier, NV1500/2500/3500, Pathfinder, Xterra |
These ApplianPar engine mounts replace the front driver and passenger mounts on several Nissan 4.0-liter vehicles and are intended to restore factory-style engine support and vibration control. Installation is typical for engine mounts: the engine is slightly supported while the old mounts are removed and the new mounts are bolted in place, so a basic set of hand tools and mechanical familiarity or a shop visit are recommended. The mounts are offered as direct-fit replacements for specified Frontier, NV1500/2500/3500, Pathfinder, and Xterra model years, which simplifies selection for those specific trucks and SUVs. In use the mounts should reduce excessive engine movement and help return drivetrain NVH to expected levels when the original mounts wear. Because these are aftermarket replacements, buyers should verify fitment for their exact engine and chassis code before ordering and expect installation labor similar to other front mount swaps. They are a practical option for owners who want a complete front mount replacement without sourcing multiple individual parts.
Best for: Balanced buyers looking for a reliable, ready-to-install front mount replacement to restore factory ride and vibration control on supported Nissan 4.0 vehicles.
Less Ideal for: Owners seeking OEM-branded mounts, or those unwilling to verify fitment details and arrange professional installation when needed should consider other options.
- Direct-fit replacement for specified Nissan Frontier, NV, Pathfinder, and Xterra 4.0 models
- Sold as a set covering both front driver and passenger mounts for a complete front-end replacement
- Restores engine support and reduces vibration and movement when original mounts are worn
- Aftermarket part may require confirming exact engine/chassis fit before purchase
- Installation requires supporting the engine and moderate mechanical skill or professional labor
Verdict: A convenient direct-fit front driver and passenger mount set for Nissan 4.0 trucks and SUVs that restores engine support and reduces vibration.
2. Nissan Front Engine Mount 11220-1PE0B (Genuine Nissan)
| Brand | Nissan |
|---|---|
| Model Number | 11220-1PE0B |
| Material Type | Metal |
This genuine Nissan front engine mount (11220-1PE0B) replaces the factory unit on 4.0L V6 models and is built to the same specifications as the original. It mounts in the front position and is intended to isolate engine vibration and hold engine position under load; typical installation requires raising the engine slightly and removing several fasteners, so expect a moderate DIY job or a quick shop install. The part is metal with a rubber insulator and lists direct replacement compatibility with full-size vans, Pathfinder, Frontier, and Xterra 4.0L engines. Practical benefits include factory-fit accuracy, predictable NVH control, and straightforward bolt-on installation when access allows. Some buyers reported aged rubber on shipped units and one poor longevity report, so inspect the bushing on receipt and consider conditioning if signs of oxidation appear. For performance-minded owners this part restores factory vibration damping and engine support without altering drivability, but it does not offer performance tuning or reinforced stiffness compared with aftermarket performance mounts.
Best for: Performance-oriented buyers seeking a factory-quality replacement that restores original engine mounting behavior and minimizes NVH without changing handling characteristics.
Less Ideal for: Drivers who want a stiffer performance mount to reduce engine movement under high power or track use should consider aftermarket performance mounts instead.
- Genuine Nissan factory replacement for direct fit and correct alignment
- Designed to restore factory vibration isolation and engine positioning
- Metal construction with rubber insulator matches original design
- Replaces several older Nissan part numbers for straightforward interchange
- Some units arrived with visible rubber aging or oxidation
- Not a stiffer or performance-oriented mount for aggressive tuning
Verdict: Choose this genuine Nissan front mount when you want factory-fit quality and reliable vibration control for 4.0L V6 Nissan trucks.
3. Advance Ignition Front Engine Motor Mount for Nissan Frontier 2005–2012
| Brand | Advance Ignition Technology |
|---|---|
| Model | TC-4349 |
| Position | Front Left or Front Right |
| Compatible vehicles | Nissan Frontier 2005-2012 2.5L |
This Advance Ignition front engine motor mount is a direct-fit replacement for the 2005–2012 Nissan Frontier 2.5L that positions on the front left or right side. It replaces a worn factory mount to restore proper engine alignment, reduce vibration and engine rocking under load, and help prevent added strain on transmission components. The mount is marketed as manufactured to meet factory-quality specifications and is offered in a single-piece design that is straightforward to install for a DIYer with basic mechanical skills. Practical benefits include restoring ride comfort and drivetrain stability without the premium price of OE parts. Limitations are typical of budget aftermarket mounts: long-term durability may vary compared with higher-end or factory-sourced units, and buyers should verify exact fitment and torqueing procedures for safe installation.
Best for: Budget-conscious owners looking to restore comfort and drivetrain stability on a 2005–2012 Nissan Frontier 2.5L without paying for a premium or dealer part.
Less Ideal for: Owners who prioritize maximum longevity or who need an exact factory-sourced replacement for high-mileage or heavy-duty use should consider higher-end or dealer parts.
- Direct-fit replacement for Nissan Frontier 2005–2012 2.5L front left or right positions
- Designed to reduce engine vibration and restore proper engine alignment
- Offered as a lower-cost alternative to factory replacement parts
- Simple single-piece design that is approachable for DIY installation
- Durability and long-term performance may be less consistent than higher-end or factory-mounted units
- Limited manufacturer information on materials and testing beyond general claims
Verdict: A wallet-friendly, direct-fit front engine mount that restores engine stability on the 2005–2012 Nissan Frontier 2.5L.
4. TRQ 2-Piece Engine Mount Set for Nissan Frontier / Xterra (3.3L V6)
| Fitment | Nissan Frontier 1999-2004 V6 3.3L; Nissan Xterra 2000-2004 V6 3.3L |
|---|---|
| Quantity | 2 Piece Engine Mount Set |
| Manufacturer | TRQ |
| Model | TRQ MTA71121 2 Piece Engine Mount Set |
This TRQ kit supplies the driver and passenger side engine mounts meant to replace worn mounts on the 3.3L V6 Nissan Frontier and Xterra. The mounts arrive pre-assembled to match factory fitment so a typical DIY install involves supporting the engine with a jack, removing the old mounts, and bolting the new units in place. TRQ highlights its how-to videos to simplify the procedure for home mechanics. In use these mounts reduce engine vibration and harshness for a smoother idle and crisper feel under acceleration. Customer reports show generally good fit and improved NVH, though a few users noted isolated durability failures and minor fitment quirks that can require reusing original hardware or sourcing a small bolt. Expect routine tools, deep sockets, and some engine lifting work during installation. For someone who wants a convenient direct-replacement option with supportive installation resources, this kit delivers solid value, while buyers seeking long-term, heavy-duty performance may prefer higher-end or OEM-specified parts.
Best for: Convenience-driven DIYers who prioritize easy, direct-fit repairs and clear installation guidance to restore a smoother ride without hunting for specialty parts.
Less Ideal for: Drivers seeking heavy-duty, performance-oriented mounts for off-road or high-torque applications should consider premium or OEM-equivalent options instead.
- Direct-fit replacement for Nissan Frontier/Xterra 3.3L V6 applications, simplifying installation
- Pre-assembled components reduce installation time and alignment hassle
- TRQ provides instructional videos to guide DIY installers through the process
- Noticeable reduction in engine vibration and improved driving smoothness for many users
- Some users report isolated premature failures on certain vehicles
- Occasional fitment quirks require reusing original fasteners or adding a small bolt not included in the kit
Verdict: A convenient, direct-fit replacement set that restores a smoother ride for Nissan Frontier/Xterra owners who want an easy DIY swap rather than an OEM or heavy-duty upgrade.
5. A-Premium Front Left and Right Engine Motor Mount Kit (2 pieces)
| Compatible Vehicles | Nissan Frontier, Pathfinder, Xterra, NV1500/2500/3500, Suzuki Equator (specified years/engines) |
|---|---|
| Material Type | Alloy Steel, Rubber |
| Mounting Type | Chassis Mount |
| Included Components | Front Left and Front Right Engine Mounts |
| Unit Count | 2.0 Count |
This A-Premium two-piece engine motor mount kit replaces the front left and right mounts on specified Nissan Frontier, Pathfinder, Xterra, NV-series and Suzuki Equator models. Installed as factory-replacement style mounts, the alloy steel and rubber construction is intended to support the engine while absorbing vibration and reducing noise for a smoother cabin feel. Typical use is direct replacement after mount wear or failure; the pair covers both front mounting locations so you can restore balance and reduce engine movement. Notable features include chassis-mount design and materials aimed at a precise fit. In practice the mounts fit the listed vehicles and are easy to swap in for DIYers with basic tools or for a shop to install. Limitations appear in user reports where some drivers experienced increased vibration compared with factory-quality mounts, so buyers seeking the quietest, longest-lasting OEM-equivalent damping may prefer factory-spec parts. The kit does include a one-year unlimited-mileage guarantee limited to part replacement only.
Best for: Risk-averse mainstream buyers who prioritize restoring reliable factory-like performance and want a ready-made replacement set for routine repair rather than performance upgrades.
Less Ideal for: Drivers focused on achieving the quietest, longest-lasting OEM-equivalent damping or those wanting performance-tuned mounts should consider factory-quality or premium aftermarket options instead.
- Designed as a direct-fit front left and right replacement for the listed Nissan and related models
- Alloy steel and rubber construction intended to absorb engine vibration and reduce noise
- Sold as a matched two-piece set so both front mounts are replaced together
- Includes a one-year unlimited-mileage guarantee covering the cost of the part
- Some users reported increased vibration compared with factory-quality mounts in real-world driving
Verdict: A cost-effective matched two-piece front engine mount kit built to restore engine support and reduce vibration for the specified Nissan Frontier-family models.
Choosing the Right Nissan Frontier Engine Mount: Key Factors to Consider
Fitment and Vehicle Specificity
Precise fitment is essential because an engine mount designed for the Nissan Frontier should match the factory mounting points and geometry. A correct fit reduces installation time and prevents stress concentrations that can accelerate failure. Using a vehicle-specific mount avoids the need for adapters or modifications that could change engine placement and affect driveline alignment.
Check that bolt patterns, bracket clearances, and overall dimensions align with your truck's model year and powertrain configuration. When fitment is accurate, the mount will distribute loads as intended and preserve the original handling and shift quality.
Vibration Isolation and Bushing Design
The primary function of an engine mount is to isolate engine movement and minimize vibration transmission into the cabin. Bushing material and geometry determine how effectively the mount absorbs engine pulses and road-induced frequencies. Softer elastomer bushings typically reduce vibration more effectively, while stiffer compounds control motion under heavy loads but may transmit more harshness.
Consider the balance you want between cabin comfort and precise engine control. Some mounts use multi-stage or fluid-filled designs to broaden isolation performance across different RPM and load ranges, which can be beneficial for everyday driving.
Torque Control and Load Support
Engine torque creates twisting forces that mounts must resist to keep the engine from excessive movement during acceleration or deceleration. A mount that handles torque loads effectively maintains consistent driveline geometry and reduces stress on hoses, wiring, and linkages. Poor torque control can lead to clunking noises and accelerated wear on adjacent components.
Look for designs that reinforce key load paths and preserve engine position under high-torque events. The way a mount anchors to the engine and chassis affects how torque is transmitted through the structure.
Durability and Material Quality
Mount longevity depends on materials, bonding methods, and resistance to heat, oil, and road contaminants. High-quality rubber compounds, polyurethane options, or fluid-filled elements each have tradeoffs in wear characteristics and comfort. Heat and chemical exposure in the engine bay can harden or degrade some materials faster than others.
Consider what kind of driving you do and inspect the mount materials for resistance to the environment they will face. Reinforced brackets and corrosion-resistant coatings can extend service life in wet or salty climates.
Ease of Installation and Hardware
Installation practicality matters if you plan to do the work yourself or want to minimize shop labor. A mount that uses factory bolt patterns, includes necessary fasteners, and fits without extensive access work reduces time and potential for installation errors. Some mounts require engine support or minor ancillary removal; others are direct swaps with minimal disassembly.
Evaluate whether the mount requires torque specifications, special alignment steps, or included hardware. Clear instructions and complete mounting kits make a straightforward job more likely.
Noise, Vibration, and Harshness Tradeoffs
Different mount designs manage noise, vibration, and harshness in distinct ways. Options tuned for comfort will absorb low-frequency vibration but may permit more engine movement under load. Performance-oriented or firmer mounts reduce movement but may increase perceptible vibration and noise in the cabin.
Decide which compromise you prefer based on daily driving, towing, or off-road use. Understanding how a mount will change NVH characteristics helps set expectations for comfort versus control.
How We Chose the Best Nissan Frontier Engine Mount
We focused on parts explicitly designed for the Nissan Frontier and evaluated candidates against four to six category-specific criteria that matter in real use. Primary filters included accurate vehicle-specific fitment, material and bushing design for vibration control, OEM-equivalent mounting points and dimensions, and expected durability under typical driving loads. We also assessed ease of installation from a hardware and access standpoint and whether the part preserves proper engine alignment to avoid driveline stress.We excluded universal or non-vehicle-specific mounts and any options lacking clear fitment data for the Nissan Frontier. Items that require major chassis modification or change engine position were not considered. The final selection favors mounts that balance isolation, longevity, and straightforward installation while maintaining proper torque support for the engine and transmission.
Our full evaluation process is outlined in our review methodology.
FAQ
What are common symptoms of a failing Nissan Frontier engine mount?
Common signs often include increased vibration in the cabin, noticeable engine movement during acceleration or gear changes, and unusual clunking or banging noises when shifting. You might also notice accelerated wear on hoses or exhaust components due to added movement. If symptoms occur intermittently, inspect mounts and related hardware for visible deterioration.
Can I replace an engine mount myself?
Many owners can replace an engine mount with basic tools if the design allows easy access and you have a safe way to support the engine. Some mounts require lifting the engine slightly and following specific torque sequences. If the job needs special tools or extensive disassembly, a professional installation may be more efficient and safer.
How does mount material affect ride comfort?
Softer rubber bushings generally absorb more vibration and improve ride comfort, while firmer compounds or polyurethane improve control but can transfer more harshness into the cabin. Fluid-filled mounts can offer a middle ground by damping a range of frequencies. Material choice influences how much engine motion and NVH you will experience.
When should I inspect my engine mounts?
Inspect mounts during routine maintenance or if you notice symptoms like vibration, clunks, or visible misalignment. Also check mounts after events that stress the drivetrain, such as heavy towing or off-road use. Regular visual checks for cracking, separation, or corrosion help catch issues before they cause secondary damage.
Will a firmer mount damage other components?
A firmer mount can change how forces are transmitted through the drivetrain and may increase stress on adjacent parts like hoses, exhaust hangers, or transmission mounts. This does not always cause damage, but it can accelerate wear in some cases. Balance your need for control with the potential for increased NVH and component stress.
Conclusion
Prioritize a mount that matches your Nissan Frontier's fitment and balances vibration isolation with torque control. Consider the environment and driving style when choosing bushing material and mounting design, since each option shifts tradeoffs between comfort and drivetrain stability.Give weight to accurate fit, durable materials, and straightforward installation to reduce future headaches. By focusing on these criteria you can restore smoother operation and maintain proper engine alignment for long-term reliability.
Explore More:
- Check out all Nissan Frontier parts & accessories
- Explore Engine Mounts Maintenance & Repair Guides
- Explore Engine
- Browse all Auto Parts
