Note: This article contains affiliate links. If you click on these links and make a purchase, I may earn a small commission at no extra cost to you. This helps support my research and content. Read my full affiliate disclosure here.
If your Mercedes-Benz GLE is showing extra vibration, clunking during shifts, or unusual engine movement, the right engine mount can restore refinement and protect drivetrain components. You want a mount that fits the vehicle precisely, dampens vibration effectively, and holds up to real-world driving without accelerating wear elsewhere. This guide highlights our shortlisted picks for Mercedes-Benz GLE engine mount options, each chosen for measurable fitment and vibration-control traits. Below we explain the criteria used to evaluate them and what to look for when choosing a replacement or upgrade.
Looking for other parts? See all Mercedes-Benz GLE parts & accessories.
Top Picks at a Glance
1. IROMEHONY Engine Support Motor Mounts Kit (Left & Right) for Mercedes‑Benz GLE 350/450E
| Included Components | 1 x Engine Support Motor Mounts Kit Left & Right |
|---|---|
| Manufacturer | IROMEHONY |
| Compatible Models | GLE350 (W167/C167) 2019-2024; GLE450E 2024-2025 |
| Replacement Part Numbers | 167-240-66-00, 167-240-51-00, 1672405100, A1672405100, 1672406600 |
This IROMEHONY kit supplies both left and right engine support mounts designed to replace the factory mounts on Mercedes‑Benz GLE350 (W167/C167) 2019–2024 and GLE450E 2024–2025. The kit's main role is to secure the engine relative to the vehicle frame to reduce movement under acceleration, braking, and cornering, restoring stable power delivery and reducing vibration. It ships as a complete pair so you can replace both sides at once instead of sourcing individual parts, and the listing references common Mercedes part numbers for fit confirmation. Practical benefits include a full-pair replacement that simplifies a coordinated mount swap and a pre-shipment quality inspection claim. Important limitations are that these are aftermarket replacements rather than factory parts, and the product does not include installation instructions so professional fitting is recommended. Buyers should also verify the specific part numbers against their vehicle before purchasing.
Best for: Balanced all‑round buyers seeking a straightforward, full-pair replacement to restore engine stability on specified GLE models and who value a one‑purchase solution over sourcing individual pieces.
Less Ideal for: Owners who require factory-branded parts, documented installation guides, or exact OEM provenance should consider alternatives or dealer-sourced mounts.
- Sold as a complete left-and-right kit so both mounts can be replaced in one service
- Fits specified Mercedes‑Benz GLE350 (W167/C167) 2019–2024 and GLE450E 2024–2025 according to listed part numbers
- Designed to restore engine positioning and reduce movement during acceleration, braking, and cornering
- Manufacturer states quality inspection before shipping
- Aftermarket part rather than a factory replacement which may differ slightly in fit or finish
- No installation instructions included, so professional installation is recommended
Verdict: A convenient full-pair aftermarket engine mount kit that restores engine stability for the specified Mercedes‑Benz GLE models.
2. Engine Motor Mount Right A1672407300 for Mercedes-Benz GLE W167
| Manufacturer | SMBHSM |
|---|---|
| Part Number | 4816456456737 |
| Size | Right A1672407300 |
| Date First Available | February 26, 2026 |
This right-side engine mount is a direct replacement designed to secure the engine to the chassis and damp vibration for Mercedes-Benz GLE W167 vehicles. It installs on the lower/side position of the engine and is used during routine mount replacement or when worn mounts cause excess vibration, noise, or engine movement. The part is metal-bodied with rubber buffering to absorb engine motion and protect drivetrain components from vibration damage. In practice the mount restores stable engine posture and reduces NVH that can accelerate wear on surrounding components. Installation requires proper engine support with a jack or lift and basic hand tools to remove the old mount and torque the fasteners to factory specification. Limitations include the need for correct fitment to the right A1672407300 position and that this aftermarket unit may require careful alignment during install to match factory mounting points.
Best for: Performance-oriented Mercedes-Benz GLE owners who prioritize ride quality and drivetrain stability and want a robust, high-quality replacement mount to reduce vibration and preserve component life.
Less Ideal for: Drivers seeking a universal or multi-vehicle solution or those unwilling to perform or pay for professional installation should consider alternatives.
- Designed to reduce engine vibration and improve driving comfort
- Metal construction with rubber buffering to protect drivetrain components
- Made to fit the right A1672407300 mounting position on GLE W167
- Restores stable engine posture to prevent excessive movement
- Aftermarket part may require careful alignment to match factory mounting points
- Requires vehicle support and mechanical skill for safe installation
Verdict: A durable right-side replacement engine mount built to restore engine stability and reduce vibration on Mercedes-Benz GLE W167 models.
3. MUNIK 2-Piece Engine Mount Set for Mercedes‑Benz GLE/GLS/ML (1662405817, 1662405917)
| Brand Name | MUNIK |
|---|---|
| Set Name | 2-Piece Motor Mount Set |
| Manufacturer Part Number | 1662405817 1662405917 |
| Included Components | 1662405817 1662405917 |
This MUNIK two-piece engine mount set replaces worn mounts on compatible Mercedes‑Benz GLE, GLS and M‑Class vehicles to restore engine stability and reduce vibration. It is intended as a direct-fit replacement for the listed part numbers, so installation follows the same mounting points as factory gear and is typically performed during a routine mount swap or engine service. The listing emphasizes fitment-focused design and basic quality checks, which translates to straightforward installation and dependable daily performance when matched to the correct part references. Practical benefits include quieter cabin feel and reduced driveline movement after replacement. Limitations are that fitment is specific to certain model years and part numbers, so buyers must confirm compatibility before purchasing, and this is a standard replacement part rather than an upgraded performance mount for aggressive driving. Expect a solid, cost-conscious option for maintaining factory handling and NVH characteristics on the supported Mercedes models.
Best for: Practical optimizers looking to restore factory ride comfort and reduce engine vibration on supported Mercedes‑Benz GLE/GLS/ML vehicles without paying for premium aftermarket upgrades.
Less Ideal for: Drivers seeking heavy-duty or performance mounts for track use or aggressive driving should consider performance-specific alternatives instead.
- Designed to match factory mounting points for straightforward installation
- Sold as a two-piece set to replace both related engine mounts at once
- Focus on fitment and everyday usability for reliable daily driving performance
- Workmanship tested by the brand to ensure basic quality control
- Compatibility is limited to specific Mercedes‑Benz models and years and requires careful part number confirmation
- Not marketed as an upgraded or performance-oriented mount for sporty driving
Verdict: A practical, budget-conscious replacement set that restores factory-style engine stability on supported Mercedes models when the correct part numbers are confirmed.
4. HOPESPANNER Engine Motor Mount A1662405817 for Mercedes-Benz GLE W166 (Left)
| Position | Left |
|---|---|
| Item model number | A1662405817 |
| Manufacturer | HOPESPANNER |
| Application | Mercedes Benz GLE320 GLE W166 2015-2019 3.0T 7A/MT |
This HOPESPANNER engine motor mount is a direct replacement-style left mount for the Mercedes-Benz GLE W166 3.0T (2015–2019). It is constructed from metal and is intended to damp engine vibration and prevent those forces from transferring into the cabin, which improves driving comfort. Typical use is as a like-for-like factory replacement when an original mount shows wear, cracking, or excessive engine movement. The listing emphasizes simple durability and straightforward installation but recommends a professional fitment because engine mounts require lifting and alignment. Practical benefits include lower cost compared with dealer parts and a basic metal construction that resists immediate collapse. Important limitations are that this appears to be a budget aftermarket part with limited product background and no stated warranty details, and buyers should expect installation by a competent technician to ensure correct alignment and avoid driveline strain.
Best for: Budget-conscious owners seeking an inexpensive, functional replacement mount to restore normal engine support and reduce vibration without paying dealer prices.
Less Ideal for: Drivers looking for factory-backed parts, performance mounts, or extended warranty coverage should consider factory-quality or upgraded alternatives.
- Made of metal for straightforward durability under normal driving loads
- Designed specifically for Mercedes-Benz GLE W166 left-side 3.0T fitment (2015–2019)
- Reduces engine vibration transmission to the cabin, improving comfort
- Sold as a single direct-replacement piece suitable for targeted repairs
- Limited manufacturer information and no clear warranty or support details
- Installation is recommended for a professional due to alignment and lifting needs
Verdict: A low-cost, metal left-side replacement engine mount for Mercedes‑Benz GLE W166 that restores vibration control without the dealer price.
5. A-Premium 3-piece Engine and Transmission Mount Kit for Mercedes-Benz GLE/GLS/ML
| Set Name | 3-piece set |
|---|---|
| Included Components | 2x Front Right Motor Mount, 1x Transmission Mount |
| Material Type | Alloy Steel, Aluminum, Plastic, Rubber |
This A-Premium kit supplies two front right motor mounts and one transmission mount intended as direct factory-replacement style parts for specific Mercedes-Benz GLE, GLS, and ML V6 models. Installers typically use the set when worn mounts cause increased vibration, engine movement, or drivetrain noise; the kit is meant to return the engine to correct alignment and absorb road and torque forces. The listing highlights alloy steel, aluminum, rubber, and plastic construction and claims testing to meet or exceed factory specifications, which suggests durability for daily driving and long highway runs. A one-year unlimited-mileage parts guarantee covers the mount kit itself. Expect straightforward fitment for the listed model years, but note this is an aftermarket replacement and may have slight differences from factory parts in fit or finish. Installation requires moderate mechanical skill or a professional due to lifting and alignment steps. The kit is a practical, reliability-focused option for restoring a stable, quieter ride on the compatible Mercedes models.
Best for: Reliability-focused buyers who prioritize restoring factory-like engine stability and reducing vibration on Mercedes GLE/GLS/ML vehicles and prefer replacing multiple worn mounts at once.
Less Ideal for: Buyers seeking an exact factory-sourced part or a warranty that covers installation and related service costs should consider alternatives or dealer parts and service.
- Sold as a complete three-piece kit so both front motor mounts and the transmission mount are replaced together
- Materials list (alloy steel, aluminum, rubber) suggests components designed for load and vibration damping
- Made to match fitment for specific Mercedes V6 models, simplifying part selection for those vehicles
- Includes a one-year unlimited-mileage parts guarantee covering defects in the mount kit itself
- Aftermarket part so slight variations in fit or finish compared with factory parts are possible
- Warranty covers only part cost and excludes installation, towing, or related labor expenses
Verdict: A practical aftermarket kit to restore engine stability on compatible Mercedes V6 models, offering a complete three-piece replacement with a one-year parts guarantee.
6. maXpeedingrods Engine Mount Set (Left & Right) for Mercedes-Benz GLE/GLS/M-Class 2011–2019
| Application | Mercedes‑Benz GLE W166 2015–2018; GLE Coupe C292 2015–2019; GLS X166 2015–2019; M‑Class W166 2011–2015; GL‑Class X166 2013–2015 |
|---|---|
| Material | Aluminum and Rubber |
| Package | 2 × Engine Mounts (Left and Right) |
| Manufacturer Part Number | SI90VR |
This maXpeedingrods engine mount set replaces the factory left and right motor mounts for a range of Mercedes‑Benz GLE, GLS, M‑Class and GL‑Class models and is sold as a complete two-piece kit. It is constructed from aluminum with rubber bushings to reduce vibration while keeping weight low, and the listing specifies direct plug-and-play installation so a competent DIYer or technician can swap the mounts without fabrication. In practice the mounts offer a near-equivalent fit to factory parts and can restore engine stability and reduce driveline movement when old mounts are worn. Some customers report solid fit and noticeably reduced vibration after installation, while a few reviews mention fitment or bushing issues on non-matching vehicles, so careful selection by model year and inspection during install is important. The parts come as left and right units which simplifies replacing both sides at once, but buyers should be prepared to spend time accessing all mount fasteners during removal and replacement.
Best for: Convenience-driven owners who want a ready-to-install replacement set that restores engine stability without custom work and prefer a straightforward parts swap to avoid extended downtime.
Less Ideal for: Buyers seeking a high-performance or race-oriented mount with stiffer damping, or those who need mounts for vehicle models outside the specified Mercedes-Benz GLE/GLS/M‑Class/GL‑Class fitment.
- Direct plug-and-play design intended for bolt-in replacement on specified Mercedes-Benz models
- Aluminum body with rubber bushings aims to balance durability and vibration damping
- Sold as a left and right set so both mounts can be replaced at once
- Multiple customer reports of good fit and restored engine stability after installation
- Some reviewers reported fitment or bushing issues on vehicles that were not exact matches
- Installation can be time consuming due to access and removal of factory fasteners
Verdict: A plug-and-play left and right engine mount set that restores factory-style engine stability on the specified Mercedes‑Benz GLE/GLS/M‑Class/GL‑Class models.
7. maXpeedingrods Engine Motor Mount Set (Left & Right) for Mercedes-Benz GLE/GLS/M-Class W166 X166 C292 2011–2019
| Application | Mercedes‑Benz GLE W166 2015-2018; GLE Coupe C292 2015-2019; GLS X166 2015-2019; M‑Class W166 2011-2015; GL‑Class X166 2013-2015 |
|---|---|
| Replaces Part Numbers | 1662405817, 1662405917 |
| Material | Aluminum and Rubber |
| Package Included | Left engine mount and Right engine mount |
This maXpeedingrods set includes left and right engine mounts sold as a direct replacement for Mercedes‑Benz part numbers 1662405817 and 1662405917. Intended for plug‑and‑play installation, the mounts pair an aluminum housing with rubber bushings to absorb engine vibration and restore driving stability on GLE W166, GLE Coupe C292, GLS X166 and related W166/X166 model years. Buyers report the parts match factory appearance and can noticeably reduce harshness when original mounts are worn, while installation can be time consuming because access and removing old mounts often requires lifts and basic mechanical experience. Several reviews praise fitment and value, but there are isolated reports of fit issues or one side failing to hold the bushing; those suggest checking parts on arrival and using experienced installation to avoid stripped fasteners or improper torque. The set is a practical, lower‑cost replacement that works well for most maintenance jobs but benefits from careful installation and inspection before final assembly.
Best for: Risk‑averse mainstream buyers who want a direct replacement to restore factory driving comfort without experimenting with performance or aftermarket stiffening parts, and who prefer a straightforward maintenance solution for Mercedes‑Benz GLE/GLS/M‑Class models.
Less Ideal for: Drivers seeking performance‑oriented or upgraded mounts with stiffer characteristics should look at specialty performance options, and buyers without access to proper tools or mechanical help may prefer professional installation services.
- Includes both left and right mounts for a complete replacement job
- Built with aluminum housing and rubber bushings to reduce vibration and improve stability
- Sold as direct-replacement fit for Mercedes part numbers 1662405817 and 1662405917
- Plug-and-play installation style intended to match factory mounting points
- Some buyers reported fitment problems or component failures on a small number of units
- Installation can be time consuming and may require lifts or mechanical experience to reach all mounting points
Verdict: A budget‑minded, factory‑style two‑piece replacement that restores ride comfort on the specified Mercedes‑Benz GLE/GLS/M‑Class models.
Choosing the Right Mercedes-Benz GLE Engine Mount: Key Factors to Consider
Fitment and Compatibility
Exact fitment matters because mounting geometry controls engine position and load paths through the chassis. A mount that matches the Mercedes-Benz GLE's original mounting points ensures correct alignment of drivetrain components and avoids introducing stress to adjacent parts. Incorrect fitment can lead to premature wear of transmission mounts, misaligned driveshaft angles, or additional vibration.
Check that the mount is specified for the GLE model year and engine variant you have. Bolt pattern, stud orientation, and height tolerances are all important because small differences can change engine attitude and compromise performance.
Vibration Damping Performance
Effective damping reduces perceived vibration and cabin noise while preventing harmonic amplification at certain engine speeds. The mount's internal elastomer design, durometer rating, and any added hydraulic or fluid chambers influence how well it isolates engine motion. Too soft a mount can allow excessive movement under load; too stiff a mount can transmit more vibration to the chassis.
Consider the driving conditions you encounter. If you spend a lot of time in stop-and-go traffic, mounts tuned to absorb low-frequency torque pulses are beneficial. For highway driving, look for mounts that control resonance at common cruise RPMs.
Durability and Material Resistance
Mounts are exposed to heat, oil, and road contaminants that degrade rubber and bonding agents over time. Materials and bonding techniques determine resistance to cracking, swelling, and separation. Reinforced designs, higher-grade elastomers, and corrosion-resistant metal components extend service life and reduce the chance of sudden failure.
Assess whether the mounting will face harsh conditions such as frequent short trips, heavy towing, or exposure to engine leaks. Choosing a mount built to withstand those environments reduces maintenance frequency and the risk of related drivetrain damage.
Mount Type and Tuning
Mounts come in different constructions, including solid, rubber, hydraulic, and dual-density or torque-specific designs. Each type prioritizes a balance between isolation and positional control. Hydraulic mounts often provide superior NVH performance by using fluid chambers to dampen vibrations, while stiffer torque mounts limit engine movement during acceleration.
Think about your priorities: a comfort-oriented setup favors softer or hydraulic designs for reduced cabin vibration, while performance-minded drivers may accept firmer mounts that improve throttle response and maintain drivetrain geometry under load.
Installation and Serviceability
Ease of installation affects labor time and the chance of installation-related issues. Mounts that match OEM mounting points and use standard hardware simplify replacement. Look for designs that do not require extensive disassembly of adjacent components, and consider whether alignment aids or preinstalled studs are included to reduce shop time.
Also factor in maintenance considerations such as replaceable bushings or rebuildable cores if you prioritize long-term serviceability. Clear installation guidance and proper torque specifications help ensure a safe, reliable fit.
Warranty and Support Documentation
A clear warranty and accessible technical documentation indicate confidence in product durability and provide recourse if defects occur. Coverage length, claim process clarity, and included installation instructions matter when evaluating long-term value. Good technical support can help with fitment questions and torque recommendations.
Consider whether the manufacturer provides material specs, load ratings, or test results that substantiate claims about vibration isolation and lifespan. Products with transparent testing information reduce uncertainty when making a selection.
How We Chose the Best Mercedes-Benz GLE Engine Mount
We focused on factors that directly affect fitment, NVH reduction, and long-term durability in Mercedes-Benz GLE applications. Key evaluation criteria included precise vehicle-specific fitment to ensure correct isolation and alignment, measured vibration-damping characteristics to minimize in-cabin shake, material and construction quality for resistance to oil and heat, and mounting-point durability to avoid premature failure. We also considered ease of installation, availability of OEM-spec or equivalent components, and documented compatibility with common GLE engines and subframes.We excluded universal or generic mounts that require significant modification, parts with unclear fitment claims, and any products lacking verifiable material or performance information. The resulting shortlist emphasizes mounts that balance accurate fit, effective vibration control, and robust construction for reliable service in the Mercedes-Benz GLE.
Our full evaluation process is outlined in our review methodology.
FAQ
What are common symptoms of a failing engine mount in a Mercedes-Benz GLE?
Common signs often include increased vibration in the cabin, especially at idle or during acceleration, noticeable clunking or banging when shifting or changing throttle, and excessive engine movement visible under the hood. These symptoms can vary with engine load and may be more apparent during cold starts or aggressive acceleration.
Can I replace a Mercedes-Benz GLE engine mount myself?
Replacement is sometimes feasible for experienced DIYers who have proper tools and a safe means of supporting the engine. Some mounts require lifting the engine slightly to remove and reinstall hardware. If the job requires removing major components or dealing with torque-sensitive mounts, professional installation is usually safer.
How long do engine mounts typically last in a GLE?
Lifespan depends on driving habits and conditions. Under normal driving, mounts often last many tens of thousands of miles, but exposure to oil, heat, or frequent hard acceleration can shorten service life. Regular inspection for cracking or excessive movement helps catch issues before they cause related drivetrain damage.
Will a stiffer mount increase vibration in the cabin?
A stiffer mount tends to transmit more vibration to the chassis while limiting engine movement. This tradeoff can improve throttle response and preserve alignment under load but may make low-frequency vibration more noticeable. Choosing the correct mount type depends on whether you prioritize comfort or tighter engine control.
What should I know about torque specifications when installing a mount?
Proper torque on mounting bolts is important to maintain clamping force and avoid loosening or distortion. Bolt torque values depend on the mount design and hardware grade, so follow manufacturer or factory specifications. Using correct torque sequences and checking fasteners after initial driving reduces the risk of premature loosening.
Are there signs that indicate a mount failed suddenly rather than gradually?
Sudden failure often presents as an abrupt increase in engine movement, immediate clunking under acceleration, or a sudden change in noise and vibration levels. Gradual failures usually show progressive symptoms like increasing vibration or minor noises that worsen over time. Either scenario warrants inspection to prevent collateral damage.
Conclusion
When choosing a Mercedes-Benz GLE engine mount, prioritize accurate fitment and the vibration-damping characteristics that match your driving needs. Balance durability and material resistance with the mount type that suits your priorities, whether comfort or tighter engine control. Consider installation complexity and available warranty support as part of the decision.Recognize the tradeoffs between isolation and control: softer or hydraulic designs reduce cabin vibration while firmer mounts improve positional stability. Use the factors discussed here to match a mount to how you drive and maintain your vehicle.
Explore More:
- Check out all Mercedes-Benz GLE parts & accessories
- Explore Engine Mounts Maintenance & Repair Guides
- Explore Engine
- Browse all Auto Parts
