Note: This article contains affiliate links. If you click on these links and make a purchase, I may earn a small commission at no extra cost to you. This helps support my research and content. Read my full affiliate disclaimer here.
When a Jeep Compass engine mount wears out, you can notice more vibration, unusual noise, or shifting under acceleration. Picking the right replacement matters because the mount affects ride comfort, drivetrain alignment, and long-term component wear. This guide highlights the top shortlisted options for Jeep Compass engine mount replacements and explains the practical criteria we used to evaluate them, such as fit accuracy, material durability, and vibration control. Read on to understand which features matter most and how the picks address common symptoms and installation concerns.
Looking for other parts? See all Jeep Compass parts & accessories.
Top Picks at a Glance
| Best Reviewed A top-rated pick with lots of positive feedback | DOFOCH Engine and Transmission Mount Kit for 2007–2016 Jeep Compass 2.0L/2.4L (4‑Piece) |  |
| Most Popular A crowd favorite that many people choose with confidence | Beck/Arnley 104-2224 Engine Mount |  |
| Best Quality Built to a higher standard if you want something more solid | A-Premium 4‑Piece Engine and Transmission Mount Kit |  |
| Best Budget The cheapest option that still gets the job done reliably | SCITOO Engine and Transmission Mount Set for Jeep Compass 2.4L (2007–2017) |  |
| Most Sold A high-volume bestseller chosen again and again | GXARTS Engine Mount Damper Compatible with Jeep Compass 2.4L (2017–2020) |  |
| Best Value for Money The sweet spot between price and what you get | RP Remarkable Power G158 Engine and Transmission Mount Kit (4‑Piece) |  |
| Best Overall The best all-around choice for most situations | Yllshengyu 3-Piece Engine Motor & Transmission Mount Kit for Jeep Compass 2.4L (2017–2022) |  |
1. DOFOCH Engine and Transmission Mount Kit for 2007–2016 Jeep Compass 2.0L/2.4L (4‑Piece)
| Compatible models | Jeep Compass 2007–2016 2.0L/2.4L |
|---|---|
| Included components | Front, front-right, rear engine mounts and transmission mount |
| Manufacturer | DOFOCH |
| Item model number | EMONUT-046 |
This DOFOCH kit supplies the front, front-right, rear engine mounts and the transmission mount intended as direct replacements for 2007–2016 Jeep Compass 2.0L and 2.4L models. The parts are steel-and-rubber assemblies built to stabilize the powertrain, reduce vibration, and limit engine movement under acceleration and when shifting. Typical use is a full kit swap during a repair to restore factory-like damping and reduce noise that develops when mounts age. Notable features include multiple replacement part numbers for cross-reference and a full set approach so balance and weight distribution are addressed at once. Practical benefits are improved ride comfort and drivetrain stability without sourcing individual pieces separately. Reported limitations include occasional fitment variance on the front mount that may require minor modification or extra installation time, so expect to verify bolt threads and clearances during replacement.
Best for: Reliability-focused buyers who prioritize restoring factory-level engine stability and quietness on a Jeep Compass and prefer replacing the whole mount set at once to avoid repeating the repair.
Less Ideal for: Buyers seeking a guaranteed bolt‑in, no‑tweak OEM exact fit or those who only need a single mount and want a one-off part rather than a full kit should consider other options.
- Complete four-piece kit covers front, front-right, rear engine mounts and transmission mount for a one-stop replacement.
- Steel and rubber construction aimed at resisting wear and maintaining stability under load.
- Cross-referenced part numbers make it easier to confirm compatibility with the Jeep Compass powertrains.
- Some buyers report the front mount needs minor trimming or fastener changes to fit, which can add installation time.
Verdict A practical, reliability-minded full mount kit for 2007–2016 Jeep Compass that restores stability and comfort, but check the front mount fit during installation.
2. Beck/Arnley 104-2224 Engine Mount
| Mounting Type | Engine Mount |
|---|---|
| Manufacturer | Beck/Arnley |
| Model | 104-2224 |
| UPC | 049797945583 |
This Beck/Arnley engine mount is a direct replacement-style unit intended to damp engine vibration and secure the powertrain to the vehicle. It is used when an original mount is worn, torn, or leaking and is installed in the engine bay to restore normal engine positioning and reduce noise and vibration. The listing and brand detail that the mount matches factory design and is engineered for harsh underhood conditions, which suggests it will fit and perform like the factory part for compatible applications. Practical benefits include premium materials aimed at vibration damping and durability and an application-specific design to help ensure correct fitment. Buyers should note fitment can be vehicle- and variant-specific; user reports indicate some fitment mistakes when configuration (for example diesel vs gasoline or side-specific mounts) differs, so confirm the Compass engine and mount side before ordering. This is a straightforward swap for routine repairs but not a performance or heavy-duty aftermarket upgrade.
Best for: Convenience-driven buyers who want a ready replacement that matches factory fit and restores normal drive comfort with minimal fuss during a routine repair.
Less Ideal for: Drivers needing upgraded performance mounts for motorsport or heavy towing use, or those who cannot confirm their Compass engine variant and mount side prior to purchase.
- Factory-quality fit and form intent to match OEM specifications
- Built from materials designed to damp engine vibration and resist underhood conditions
- Application-specific design to simplify correct installation
- Includes additional factory-style parts where applicable for a complete replacement
- Some vehicle variants may require side-specific or different-configured mounts and this part may not match those configurations
- Not designed as a performance or heavy-duty upgrade beyond factory-level durability
Verdict A practical, factory-style replacement for restoring normal engine isolation on the Jeep Compass when fitment matches the vehicle configuration.
3. A-Premium 4‑Piece Engine and Transmission Mount Kit
| Set Name | 4-Piece Set |
|---|---|
| Manufacturer | PremiumpartsWhosale |
| Item model number | A5416 |
| Manufacturer Part Number | APEM398 |
This four-piece A-Premium kit supplies the front, right, rear engine mounts and left transmission mount needed when worn rubber or broken brackets let the engine move excessively. Designed for Compass and similar 2.4L four-cylinder models with CVT or automatic transmissions, the set is installed as a direct replacement to bring back factory-style positioning and dampening. In real use the mounts noticeably reduce vibration and harshness transmitted to the cabin and can improve perceived shifting smoothness by keeping the drivetrain aligned. The kit includes all mounts for a coordinated replacement instead of swapping one at a time, which helps maintain balanced engine support. Expect a straightforward install for a competent DIYer or a quick job for a shop, but verify exact drivetrain (AWD/4WD vs 2WD) and transmission fitment before ordering since fit varies by configuration. The manufacturer backs the kit with a one-year unlimited-mile guarantee, though longevity compared with OEM parts will depend on driving conditions and installation torque accuracy.
Best for: Performance-oriented owners who prioritize restoring tight engine mounting and reducing vibration to preserve drivetrain feel and shifting crispness.
Less Ideal for: Buyers seeking a lifetime OEM-level part or those who prefer dealer-sourced factory replacements should consider alternative factory-quality options.
- Complete four-piece kit covers front, right, rear engine mounts and left transmission mount for a coordinated replacement.
- Direct-fit design for compatible Jeep Compass 2.4L CVT/automatic configurations simplifies installation.
- Reduces engine movement and cabin vibration, improving comfort and perceived drivetrain smoothness.
- Fitment depends on drivetrain and transmission type so incorrect selection can lead to mismatch.
- Aftermarket build quality can vary and may not match longevity of factory-quality mounts.
Verdict A convenient four-piece replacement that restores engine stability and reduces vibration for compatible Compass 2.4L CVT/automatic setups, with aftermarket value and a one-year guarantee.
4. SCITOO Engine and Transmission Mount Set for Jeep Compass 2.4L (2007–2017)
| Fitment | 2007–2017 Jeep Compass 2.4L |
|---|---|
| Unit Count | 4.0 Count |
| Mounting Type | Chassis Mount |
| Manufacturer | SCITOO |
This SCITOO mount set replaces the engine and transmission mounts on 2007–2017 Jeep Compass models with the 2.4L engine to reduce vibration and reestablish proper drivetrain alignment. The kit ships with four mounts and is intended as a budget-friendly aftermarket replacement for worn or failed factory mounts. Its construction is described as heat and wear resistant, which should hold up to normal driving and seasonal temperature changes. Installation is typical for mount replacement work and will usually require basic tools and moderate mechanical experience or a shop visit for safe engine support and torque procedures. The practical benefit is a quieter cabin and more secure engine positioning compared with degraded mounts. Limitations are typical of value aftermarket parts: fitment requires confirming part numbers before purchase and long-term durability may vary compared with higher-end or premium-name-brand replacements.
Best for: A budget-conscious buyer who needs an affordable, direct-replacement mount set to restore comfort and engine stability on a Jeep Compass 2.4L from 2007–2017.
Less Ideal for: Drivers seeking the longest-lasting, premium noise isolation or those who prefer OEM dealer parts for extended warranty and proven longevity.
- Complete four-piece set covers both engine and transmission mounting points for a single repair job
- Marketed fitment for 2007–2017 Jeep Compass 2.4L simplifies selection for that vehicle
- Made with materials rated for heat and wear resistance for everyday driving conditions
- Lower-cost option compared with dealer or premium-brand replacement mounts
- Requires careful part-number verification to ensure exact fit before installation
- May not match long-term durability and noise isolation of higher-end factory-quality replacements
Verdict A wallet-friendly complete mount kit that restores engine stability on the Jeep Compass 2.4L but requires part-number confirmation and accepts some durability trade-offs versus premium replacements.
5. GXARTS Engine Mount Damper Compatible with Jeep Compass 2.4L (2017–2020)
| Fitment | Jeep Compass 2.4L 2017-2020 |
|---|---|
| Part numbers | 68363755AA, 68278029AA, 68363756AA, others listed |
This GXARTS engine mount damper is marketed as a replacement support for the 2.4L Jeep Compass (2017–2020). It functions as the engine support that secures the powertrain while isolating vibration and absorbing road and engine shock to reduce noise and drivetrain movement. Typical installation replaces a worn factory mount to restore smoother idle, firmer engine positioning under acceleration, and reduced cabin vibration. The listing highlights durability and shock-absorption as selling points, so buyers can expect rubber isolation elements and a metal bracket designed for everyday driving conditions. Practical benefits include returning vehicle feel closer to factory behavior and preventing accelerated wear on other drivetrain components. Important limitations are that this is an aftermarket part where fit depends on correct part number matching and professional or experienced DIY installation may be needed to ensure alignment and torque specs are met. The product listing does not include explicit material grades or testing data, so conservative buyers may prefer to confirm compatibility before purchase.
Best for: Risk-averse mainstream buyers who prioritize restoring factory-like NVH and drivability in a Jeep Compass and prefer a straightforward replacement rather than performance upgrades.
Less Ideal for: Drivers seeking premium OEM-specified parts backed by manufacturer testing or those looking for performance-oriented mounts with stiffer tuning should consider other options.
- Listed specifically for Jeep Compass 2.4L 2017–2020 so fitment targets the vehicle in this article
- Designed to isolate engine vibration and absorb shocks to improve cabin comfort
- Aftermarket replacement intended to restore engine positioning and reduce drivetrain movement under load
- Manufacturer does not provide detailed material specs or independent durability test data in the listing
- Multiple part numbers are shown which requires careful cross-checking to ensure exact match
Verdict A practical aftermarket engine mount choice to restore factory-style vibration control for Jeep Compass 2.4L (2017–2020), but verify exact part number and fit before installation.
6. RP Remarkable Power G158 Engine and Transmission Mount Kit (4‑Piece)
| Fitment | 2007-2012 Caliber 2.0L; 2007-2016 Compass/Patriot 2.0L |
|---|---|
| Package | 4 pieces (front right, front, rear engine, transmission) |
This kit supplies the four engine and transmission mounts commonly replaced together when aging rubber mounts cause vibration and harshness in 2.0L Jeep Compass and Patriot models. It is intended to secure the engine and gearbox, reduce vibration transferred to the body, and restore driving comfort. The set includes the front right, front left, rear engine, and transmission mounts so a workshop can replace all worn points at once rather than piecemeal. Buyers report generally improved NVH after installation and that the parts are straightforward to install for a mechanically competent DIYer or a local shop. Fitment accuracy is mixed in some reports so confirm which rear mount variant your 2011–2016 Compass/Patriot uses before installing. Threads and minor trimming or drilling were needed in a few cases, and the kit does not include installation instructions or sensors, so professional installation is recommended if you want guaranteed alignment and torque values.
Best for: Practical optimizers looking to refresh worn mounts on a Jeep Compass or Patriot and willing to replace all mounts at once to get improved comfort and service life without paying OEM prices.
Less Ideal for: Drivers who require guaranteed factory-perfect fitment or those who prefer a plug-and-play OEM replacement without any chance of minor adjustments or additional parts.
- Complete 4-piece kit lets you replace all engine and transmission mounts at once
- Designed to fit the listed 2.0L Jeep Compass and Patriot applications so the parts correspond to common mounting points
- Noticeable reduction in vibration and driveline movement when the correct mount configuration is used
- Compatible with routine shop installation and suitable for experienced DIY installation
- Some customers reported fitment problems with the rear mount requiring confirming variant or ordering an alternate part
- No installation manual or included sensors so you must reference factory torque specs or pay for professional installation
- Occasional quality issues reported such as a damaged thread that required re-tapping
Verdict A budget-friendly full mount kit that restores comfort for 2.0L Jeep Compass and Patriot models if you confirm the rear-mount variant and accept possible minor fitment tweaks.
7. Yllshengyu 3-Piece Engine Motor & Transmission Mount Kit for Jeep Compass 2.4L (2017–2022)
| Unit Count | 3.0 Count |
|---|---|
| Finish Type | Powder Coated |
| Model | 3487 3499 3501 |
| Manufacturer | Yllshengyu |
This Yllshengyu 3-piece mount kit replaces the right motor mount, rear lower torque strut, and left transmission mount for Jeep Compass 2.4L (2017–2022) with EDE/EDD/ED6 engines. It is used as a direct factory-quality replacement to restore engine alignment, manage torque, and cut down noise and vibration after old mounts wear out. The kit is sold as a complete set so you can service the primary mounting points at once, and the powder-coated components aim to resist corrosion. Buyers report noticeably smoother idle and reduced cabin vibration once installed, and the kit matches many factory part numbers for straightforward fit. Some customers note build-quality variability compared with dealer parts and occasional shorter lifespan versus premium brands, so expect solid performance at a value price rather than an upgraded heavy-duty solution. Installation typically requires basic mechanical tools and moderate experience, with access around the torque strut being the tightest step.
Best for: Balanced all-round buyers who want a complete, factory-replacement mount kit to restore ride comfort and reduce vibration on a Jeep Compass without overspending.
Less Ideal for: Drivers seeking a heavy-duty or performance mount upgrade for track use or extended high-load towing should consider stiffer aftermarket options instead.
- Complete three-piece kit covers motor, torque strut, and transmission mounts for a single repair
- Powder-coated parts for improved corrosion resistance compared with unfinished replacements
- Designed to replace multiple factory part numbers for direct fit on Jeep Compass 2.4L (2017–2022)
- Consistent user reports of reduced vibration and smoother idle after installation
- Quality and longevity appear variable compared with higher-end or dealer parts
- May not match the durability of premium or heavy-duty mount upgrades
Verdict A value-focused, complete factory-replacement mount kit that reliably reduces vibration for Jeep Compass 2.4L owners but may not match premium OEM longevity.
Choosing the Right Jeep Compass Engine Mount: Key Factors to Consider
Fitment and Compatibility
Correct fitment is essential because an engine mount must align precisely with the Jeep Compass chassis and engine hard points to avoid undue stress. A mount that does not match bolt patterns or mounting geometry can cause misalignment, accelerated wear on other drivetrain components, and harder-to-diagnose vibrations.
Confirming vehicle year, engine variant, and mounting configuration matters when selecting replacement mounts. Where fitment is ambiguous, parts that provide detailed fitment data or factory-style mounting interfaces reduce the risk of installation problems and the need for additional brackets or modifications.
Material and Construction
The materials used in an engine mount determine durability and how well it absorbs and isolates vibration. Rubber-in-shear designs provide progressive damping, while bonded elastomer or hydraulic elements can offer improved vibration control and a smoother feel.
Look for mounts with corrosion-resistant metal components and high-quality elastomers that resist oil and heat degradation. Tougher construction can translate into longer service life in harsher driving environments, such as frequent stop-and-go traffic or exposure to road salt.
Vibration Isolation Performance
One of the mount's main jobs is to reduce engine vibration transmitted to the cabin. Different designs tune how frequencies are damped; some prioritize low-frequency isolation for idle and cruising comfort, while others focus on high-frequency damping to cut harshness during acceleration.
Assessing the mount's vibration performance helps set expectations for comfort and NVH outcomes. If you experience pronounced engine mount symptoms vibration or engine mount noise, choose a mount engineered for better damping rather than one built solely for rigidity.
Durability and Environmental Resistance
Durability affects service life and whether the mount will remain effective under varying conditions. Consider resistance to oil, fuel, and road contaminants, since exposure to these substances accelerates elastomer breakdown and reduces damping capability.
Temperature tolerance is also important because under-hood heat cycles place repeated stress on the mount. A design with reinforced bonding and treated hardware helps prevent premature failures and reduces the likelihood of motor mount signs reappearing soon after replacement.
Installation and Maintenance
Ease of installation influences total downtime and whether the job is practical for a DIYer or best left to a professional. Mounts that allow straightforward access to bolts and use standard fasteners reduce labor time and the chance of installation errors.
Consider whether special tools or support procedures are needed, such as engine support bars or torque specifications. Clear installation guidance helps avoid common mistakes that can lead to mis-torqued bolts or improper seating, which in turn can cause premature engine mount failure.
Service Life and Warranty
Expected service life and any warranty coverage provide insight into a mount's long-term value. A longer warranty can indicate confidence from the manufacturer in materials and assembly quality, and it may provide protection if a component fails prematurely.
Factor in typical driving conditions when evaluating service life claims. Durable mounts that balance damping and strength tend to last longer in everyday driving, while aggressive driving or poor environmental conditions can shorten lifespan despite good initial construction.
FAQ
What are common symptoms of a failing engine mount on a Jeep Compass?
Common signs often include increased vibration felt in the cabin, clunking or knocking during acceleration or gear changes, and noticeable engine movement when revving. You may also notice unusual noise from the engine bay or increased drivetrain vibration under load.
Can I replace a Jeep Compass engine mount myself?
Replacing a mount is often possible for a competent DIYer with the right tools and safety precautions, such as an engine support and proper torque tools. The difficulty depends on the mount location and bolt access; some mounts require lifting or supporting the engine to remove and reinstall safely.
How long should a typical engine mount last?
Mount lifespan varies with driving conditions and environment, but engine mounts usually last several years under normal use. Exposure to oil, heat, or aggressive driving can shorten life, so observed motor mount signs and regular inspections help determine when replacement is needed.
Will replacing an engine mount reduce vibration and noise?
Yes, installing a properly fitting, well-damped mount typically reduces vibration and engine-related noise by isolating the engine from the chassis. The degree of improvement depends on the mount design and the severity of existing wear or damage.
Do I need to worry about torque when installing a mount?
Proper torque is important because under- or over-torqued fasteners can lead to misalignment or premature failure. Follow the vehicle-specific torque specifications and use correct sequencing where applicable to ensure the mount seats correctly and maintains secure attachment.
How We Chose the Best Jeep Compass Engine Mount
We prioritized parts that provide reliable fitment, robust material construction, effective vibration isolation, and compatibility with the Jeep Compass mounting points. Key criteria included mount design and materials, measured vibration-damping performance in real-world use, corrosion resistance for longer service life, and hard-point alignment to avoid additional drivetrain stress. We also considered ease of installation for technicians and DIYers, including bolt access and whether additional components are commonly needed. Noise reduction properties and expected service life under typical driving conditions were factored in to reflect long-term value. Excluded items included universal or generic mounts that require major modifications, parts designed for heavy-duty or racing applications that sacrifice comfort, and any component without documented compatibility details for the Jeep Compass. The final list favors parts that balance fit, durability, and vibration control for everyday use.
Our full evaluation process is outlined in our review methodology.
Conclusion
Choose a Jeep Compass engine mount that prioritizes correct fitment and effective vibration isolation, since those factors most directly affect comfort and drivetrain longevity. Balance material durability and installation practicality to minimize future service and avoid repeat failures. Remember that tradeoffs exist between the stiffest mounts, which can reduce movement but increase transmitted harshness, and softer mounts, which damp vibration but allow more engine motion. Select the option that matches your driving style and maintenance preferences.
Explore More:
- Check out all Jeep Compass parts & accessories
- Explore Engine
- Browse all Auto Parts
