Note: This article contains affiliate links. If you click on these links and make a purchase, I may earn a small commission at no extra cost to you. This helps support my research and content. Read my full affiliate disclosure here.
If your Infiniti G37 feels bouncier than it should or you notice increased vibration and noise under load, a worn engine mount can be the cause. Choosing the right Infiniti G37 engine mount matters because the mount affects how power is transmitted to the chassis, how vibrations are isolated, and how the drivetrain aligns with other components. This guide highlights the top shortlisted engine mounts for the Infiniti G37, selected for their fitment, durability, and ability to address common engine mount symptoms. Below we explain the criteria used to evaluate options and point out the factors to consider before you replace a mount.
Looking for other parts? See all Infiniti G37 parts & accessories.
Top Picks at a Glance
| Best Reviewed A top-rated pick with lots of positive feedback | VekAuto Torque Rod Engine Mount Compatible with Nissan Sentra/Juke (113601KA0A) |  |
| Most Popular A crowd favorite that many people choose with confidence | TRQ 2-Piece Engine Mount Set for 2003–2008 Infiniti FX35/G35/Nissan 350Z |  |
| Best Quality Built to a higher standard if you want something more solid | A-Premium 3‑Piece Engine and Transmission Mount Kit |  |
| Best Budget The cheapest option that still gets the job done reliably | URO Parts Engine Mount 11811140985 (Left/Right) |  |
| Most Sold A high-volume bestseller chosen again and again | A-Premium Engine and Torque Strut Mount Kit for Infiniti (3.5L) |  |
| Best Value for Money The sweet spot between price and what you get | Beck/Arnley 104-2224 Engine Mount |  |
| Best Overall The best all-around choice for most situations | LOONGRIE Engine and Transmission Mount Set (Set of 4) |  |
1. VekAuto Torque Rod Engine Mount Compatible with Nissan Sentra/Juke (113601KA0A)
| Compatible vehicles | Lists Nissan Sentra 2013-2018 and Nissan Juke 2011-2017 |
|---|---|
| OE Number | 113601KA0A |
| Material | Metal and rubber |
| Position | Inner |
This torque rod engine mount is a straightforward replacement unit that controls engine torque and dampens vibration using a metal bracket bonded to a rubber isolator. It is typically used where worn mounts cause rattling during acceleration, reverse gear vibration, or a noticeable shift wobble; installing this part restores the engine restraint and reduces vibration transmitted to the chassis. The design combines metal for structural support with rubber for cushioning, which should deliver predictable NVH improvement and help protect adjacent mounts and drivetrain components from added stress. Installation is intended to be performed by a professional to ensure alignment and torque specifications are met. Limitations are that this is a non-factory replacement and may differ slightly from factory fitment or long-term durability compared with a factory-quality mount, and buyers should confirm exact compatibility before purchase.
Best for: Reliability-focused buyers who prioritize restoring quiet operation and preventing secondary drivetrain wear by replacing a worn torque rod with a direct-fit aftermarket option.
Less Ideal for: Buyers seeking an exact factory-quality or OEM-branded mount for warranty-conscious restorations should consider factory replacement parts instead.
- Metal plus rubber construction provides structural support while damping vibration
- Targets common symptoms like rattling during acceleration and reverse
- Straightforward single-piece replacement that protects other drivetrain mounts from excess stress
- Multiple customer reports of good fit and improved vibration control
- Non-factory aftermarket part so long-term durability may vary compared with factory-quality mounts
- Professional installation recommended to avoid misalignment or installation damage
Verdict A budget-friendly torque rod that reliably reduces engine vibration for vehicles matching part 113601KA0A, but it is an aftermarket unit best fitted by a professional.
2. TRQ 2-Piece Engine Mount Set for 2003–2008 Infiniti FX35/G35/Nissan 350Z
| Manufacturer | TRQ |
|---|---|
| Quantity | 2 Piece |
| Fitment | 2003–2008 Infiniti FX35/G35 (RWD) |
This TRQ kit supplies two replacement engine mounts intended as direct-fit replacements for the rear-wheel-drive Infiniti models listed. Installers will use the mounts when replacing fatigued or broken factory mounts to reduce engine vibration and restore smoother idle and driveline feel. The kit is sold as a two-piece set with preassembled components to simplify alignment and save time during DIY swaps. Buyers report solid hole alignment and noticeably reduced engine shake after installation, and TRQ provides installation videos to guide users through the typical jack-and-support procedure. Expect practical benefits like easier installation compared with generic aftermarket pieces and a price point below dealer parts. Limitations include mixed longevity reports on some vehicle applications and occasional accessory fastener fit issues that may require reusing original hardware or sourcing a specific bolt size. Professional installation recommended if you are uncomfortable supporting the engine safely during removal and replacement.
Best for: Convenience-driven buyers who want an affordable, mostly plug-and-play replacement to reduce engine vibration without visiting a shop and who prefer clear installation guidance.
Less Ideal for: Buyers seeking guaranteed long-term durability or those unwilling to deal with potential hardware fit quirks should consider higher-end factory-quality replacements or professional installation services.
- Direct-fit design for specified Infiniti models simplifies installation and alignment.
- Comes as a two-piece kit with preassembled components to reduce installation time.
- Comprehensive DIY support including manufacturer videos to guide nonprofessional installers.
- Generally reduces engine vibration and improves ride smoothness when replacing worn mounts.
- Some users reported premature failure on certain vehicles, indicating inconsistent long-term durability.
- May require reusing original nuts or sourcing a specific bolt if supplied fasteners do not fit access constraints.
Verdict A budget-friendly, largely direct-fit replacement that eases DIY installation and restores smoother engine operation, though longevity can vary.
3. A-Premium 3‑Piece Engine and Transmission Mount Kit
| Unit Count | 3.0 Count |
|---|---|
| Manufacturer | PremiumpartsWhosale |
| Set Name | A-Premium 3PCS Engine Motor Mount and Transmission Mount Kit |
| Item model number | A7355 |
This three-piece mount kit supplies a front left engine mount, front right engine mount, and a transmission mount designed as a factory-replacement style solution. It is typically used when aging mounts produce excess engine movement, vibration through the cabin, or drivetrain lash during acceleration and shifts. The listing emphasizes materials and testing intended to meet factory-spec performance and the kit includes the three commonly replaced pieces for a full front mounting refresh. In practice the mounts are installed as a matched set so engine alignment and NVH control remain consistent compared with replacing a single unit. Practical benefits include correct bolt-hole alignment and a one-year unlimited-mileage guarantee that covers early failures. Important limitations are that the product is specified for V8 5.6L 4WD automatic vehicles in the fitment notes, so fitment and tuning expectations for other engines or chassis require verification, and the rubber stiffness and longevity will vary from factory-original depending on driving style and load. Expect a competent DIY or professional installation for best results.
Best for: Performance-oriented buyers who prioritize restoring tight engine control and reducing drivetrain movement after worn mounts, and who want a matched set to keep engine alignment consistent.
Less Ideal for: Buyers seeking a product specifically engineered and calibrated for the Infiniti G37 or for non‑V8 applications should consider mounts listed explicitly for their vehicle and engine instead.
- Includes both left and right engine mounts plus the transmission mount for a matched replacement set
- Advertised to meet or exceed factory-spec performance with claimed material testing
- Bolt holes and fitment appear to align with factory mounting points for straightforward installation
- One-year unlimited-mileage guarantee provides short-term protection against early defects
- Fitment notes in the listing specify V8 5.6L 4WD automatic applications rather than the Infiniti G37 so compatibility is not guaranteed for the G37
- No detailed material durometer or lifetime fatigue data provided to predict long-term NVH performance
Verdict A matched three-piece replacement kit that aims for factory-spec fit and short-term coverage, but check fitment carefully for the Infiniti G37 before buying.
4. URO Parts Engine Mount 11811140985 (Left/Right)
| Manufacturer | URO Parts |
|---|---|
| Part Number | 11811140985 |
| Set Name | 2 |
| Unit Count | 1.0 Count |
This URO Parts engine mount is a cost-focused replacement intended to restore proper engine alignment and reduce drivetrain vibration on compatible vehicles. It is sold as a vehicle-specific unit and uses alloy and elastomer construction that claims resistance to heat and ozone, which helps durability compared with cheap rubber-only mounts. Typical use is a direct swap where the worn mount is removed and the URO unit is fitted to factory mounting points to quiet vibration and improve NVH. The notable strengths are factory-like fit reported by many owners and straightforward installation using the original fasteners on G-series cars. Limitations are that it is an aftermarket budget part rather than a factory part, so long-term longevity may vary depending on driving conditions, and replacement can be a labor-intensive job on the G37 that may require a lift or engine support. For buyers who need an affordable, well-fitting replacement to stop engine movement and vibration, this is a practical option; those seeking top-tier longevity or performance tuning features may prefer higher-end alternatives.
Best for: Budget-conscious owners looking for an affordable, functional replacement to stop vibration and restore normal engine positioning on an Infiniti G37.
Less Ideal for: Owners seeking a lifetime or performance-oriented mount or those who prefer dealer-sourced factory-quality parts should consider higher-end options.
- Vehicle-specific fit that many buyers report matches factory mounting points
- Alloy and elastomer construction marketed for improved heat and ozone resistance
- Restores engine alignment and reduces drivetrain vibration when installed correctly
- Affordable aftermarket option compared with dealer-sourced replacements
- Aftermarket budget part so durability can vary versus factory-quality mounts
- Installation on an Infiniti G37 can be labor-intensive and may require special tools
Verdict A wallet-friendly, vehicle-specific replacement that restores engine support and reduces vibration on the G37 but may not match premium longevity.
5. A-Premium Engine and Torque Strut Mount Kit for Infiniti (3.5L)
| Vehicle fitment | Infiniti JX35/QX60, Nissan Murano/Pathfinder (3.5L) — see fitment notes |
|---|---|
| Package contents | Front motor mount; Front right motor mount; Rear motor mount; Front right torque strut; Rear torque strut |
| Manufacturer part number | APEM1218 |
This five-piece kit replaces the front, front-right, rear engine mounts and two torque strut mounts to restore engine support and reduce vibration. Intended as a direct-fit, the parts are used during routine mount replacement or when worn mounts cause excessive vibration, engine movement under load, or driveline noise. The listing emphasizes quality control testing and states the components meet or exceed factory-spec standards, and the kit includes the specific mounting pieces needed for a full front-end mount refresh. Practical benefits include replacing multiple aging mounts at once to prevent matched-part mismatch and returning a firmer, quieter engine bay. Limitations are that these are aftermarket replacements so fit and endurance can vary versus dealer parts, and installation may require mechanical access and alignment beyond simple bolt swaps on some vehicles. A one-year unlimited-mileage guarantee is offered by the brand.
Best for: A cautious, risk-averse buyer seeking to restore factory-like engine support on their Infiniti G37 who prioritizes reliability over budget experiments and prefers a matched replacement set.
Less Ideal for: Buyers who prefer dealer-sourced factory parts, those seeking a single temporary fix rather than a full matched set, or owners unwilling to have a mechanic perform the installation should consider alternatives.
- Complete five-piece kit replaces front, front-right, rear engine mounts and two torque strut mounts
- Sold as a matched set to avoid mixing old and new mounts when servicing the engine support system
- Manufacturer states parts are tested and produced to meet or exceed factory-spec standards
- Includes the specific mount types typically required for a front-end mount service, simplifying parts sourcing
- Aftermarket components can vary in long-term durability compared with factory-quality parts
- Installation may require intermediate mechanical skill and vehicle-specific alignment to avoid drivetrain strain
Verdict A matched five-piece aftermarket mount kit that restores engine support and reduces vibration for risk-averse Infiniti G37 owners looking for a complete front-end replacement.
6. Beck/Arnley 104-2224 Engine Mount
| Mounting Type | Engine Mount |
|---|---|
| Manufacturer | Beck/Arnley |
| Model | 104-2224 |
This Beck/Arnley 104-2224 engine mount is a factory-replacement style mount intended to damp engine vibration and secure the powertrain in vehicles it fits. Installed in the engine bay, it replaces a worn or damaged mount to restore quieter operation and reduce engine movement during acceleration and shifting. The product is marketed as matching OEM form, fit and function and uses materials aimed at withstanding underhood conditions, which should make it a practical swap for routine repairs. Buyers will appreciate that the mount is application-specific to help ensure the correct fit for the vehicle, and additional factory-style parts are included where applicable to simplify installation. Limitations include the need to confirm exact G37 fitment before purchase since some listings and user reports indicate fit differences between diesel and gasoline variants and missing vacuum or bolt locations on incorrect units. Longevity is likely acceptable for standard driving but will depend on driving conditions and installation quality.
Best for: A practical optimizer looking for a cost-effective, factory-style replacement to restore normal engine support and reduce vibration on an Infiniti G37 during everyday driving and maintenance cycles.
Less Ideal for: Drivers seeking a performance or heavy-duty mount for aggressive driving, track use, or higher-than-stock engine torque should consider reinforced aftermarket options instead.
- Designed to match OEM form, fit and function for easier installation
- Engineered materials and construction intended for underhood durability and vibration damping
- Application-specific design to improve chances of correct fit for the vehicle
- Includes additional factory-style parts where applicable to simplify replacement
- Fitment can vary between engine variants so verification for the Infiniti G37 is required
- Some units may lack vacuum or specific bolt provisions found on certain factory mounts
Verdict A budget-minded, factory-style replacement that restores engine support for an Infiniti G37 when fitment is confirmed, but double-check variant-specific fit before buying.
7. LOONGRIE Engine and Transmission Mount Set (Set of 4)
| Mounting Type | Rubber Mount |
|---|---|
| Unit Count | 4.0 Count |
| Model | LG008 |
This LOONGRIE set supplies four replacement engine/transmission mounts designed as direct-fit factory-replacement style parts. Typical use is to replace worn or broken mounts to reduce engine movement, vibration, and drivetrain noise; installation is straightforward for a mechanically inclined owner and several reviewers report bolt-up fitment without modification. The listing calls out rubber-mounted construction and references multiple factory part numbers for cross-checking fit. Practical benefits include renewing worn mounts in one job so you do not chase individual pieces later and restoring smoother idle and thump-free shifts. Limitations to consider are mixed feedback on material quality where some users found the metal housings and rubber firmer or cheaper feeling than dealer parts, which can result in slightly increased vibration in certain placements. Also this kit targets specific 1.8L automatic applications, so confirmation of part numbers or compatibility with the Infiniti G37 is required before purchase.
Best for: Balanced, practical buyers who want a single kit to refresh multiple mounts and are focused on restoring day-to-day smoothness and drivability rather than OE-branded parts.
Less Ideal for: Owners seeking dealer-level, factory-brand mounts or those who prioritize absolute NVH isolation should consider higher-end OEM or premium aftermarket mounts.
- Complete four-piece kit lets you replace all worn mounts in one service interval
- Direct-fit design referencing factory part numbers for easier cross-checking and installation
- Rubber-mounted construction reduces engine movement and improves shift smoothness compared with a failing mount
- Some buyers report the metal and rubber feel firmer or lower-quality than factory-brand mounts which can transmit more vibration
- Kit is specified for certain 1.8L automatic vehicles and may not fit the Infiniti G37 without verifying part numbers
Verdict Good value for replacing multiple worn mounts at once, but confirm compatibility with the Infiniti G37 and expect construction that may be firmer than factory-brand parts.
Choosing the Right Infiniti G37 Engine Mount: Key Factors to Consider
Fitment and Bolt Pattern
Correct fitment is essential because the mount must align precisely with the Infiniti G37's engine and chassis bolt locations. A mismatch in bolt pattern or mount geometry can cause improper engine position, leading to accelerated wear on other components and increased vibration.
Verify mounting hole spacing and the orientation of locating tabs. Proper fitment reduces installation time and avoids the need for modifications that can compromise safety or long-term reliability.
Bushing Material and Compliance
The mount bushing material determines how well the mount isolates vibration while supporting engine torque. Stiffer materials reduce engine movement and can improve throttle response, but they transmit more vibration into the cabin. Softer, elastomeric materials absorb more vibration but allow more engine travel under load.
Consider the tradeoff between comfort and performance based on how you drive the vehicle. Also check material resistance to oil, heat, and ozone, since exposure to these elements shortens service life if the compound is not formulated to withstand them.
Durability and Environmental Resistance
Engine mounts are exposed to heat, coolant and oil drips, and road contaminants. Durability depends on both the material composition and the quality of bonding between metal and rubber components. Poorly bonded interfaces often separate over time, causing early failure and noticeable engine movement.
Look for mounts with corrosion-resistant metal parts and rubbers or polymers rated for automotive temperature ranges. Longevity reduces the frequency of replacements and prevents secondary failures in adjacent components.
Load Capacity and Torque Control
Mounts must withstand the engine's static weight and the dynamic torque produced during acceleration, deceleration, and gear changes. A mount with insufficient load capacity can deform or shift, affecting drivetrain alignment and shifting performance.
Assess rated load or application notes where available, and consider mounts designed to control torque reaction to maintain consistent engine position under varying loads. This factor is especially important if you frequently accelerate hard or tow, which increases torque demands on mounts.
Noise and Vibration Characteristics
Different mount designs control noise and vibration to varying degrees. Some mounts include tuned cavities, hydraulic fill, or layered compounds that damp specific frequencies common to the engine. Others rely on simple rubber isolation that works best at lower frequencies.
Understand the type of noise or vibration you are trying to address. If you experience vibration at certain engine speeds, seek mounts with damping characteristics aimed at that frequency range. Keep in mind that reducing one type of vibration can sometimes emphasize another, so balance is important.
Installation Complexity and Serviceability
Installation difficulty affects whether you can perform the replacement yourself and what tools are required. Some mounts are direct bolt-in replacements with straightforward access, while others may require lifting the engine, removing subframe components, or specialty sockets.
Consider whether the mount includes hardware and clear instructions. If a mount makes future servicing easier by providing better access to surrounding components, that can be a practical advantage for long-term ownership.
FAQ
What are common symptoms of a failing Infiniti G37 engine mount?
Common signs include increased vibration at idle or under acceleration, clunking or banging noises when shifting gears or during rapid throttle changes, and noticeable engine movement when revving. Symptoms often worsen gradually and may appear under specific loads or speeds.
Can I drive with a bad engine mount?
You can often drive short distances with a compromised mount, but prolonged driving risks further damage. A failed mount can strain other drivetrain and exhaust components, so addressing the issue promptly reduces the chance of secondary failures.
Is engine mount replacement difficult to do yourself?
Difficulty depends on the mount location and the required support for the engine during removal. Some mounts are accessible with basic tools and an engine support, while others need the removal of brackets or subframe components. If you are comfortable with under-the-hood work and have the right tools, you may be able to complete the job safely.
How long do engine mounts usually last?
Typical service life varies with driving conditions, exposure to oil and heat, and the mount material. Many mounts last several years under normal driving, but frequent aggressive driving, fluid leaks, or harsh environments can shorten that lifespan. Inspect mounts periodically for cracks, separation, or excessive movement.
Will a stiffer mount eliminate all engine vibration?
A stiffer mount can reduce engine movement and improve perceived responsiveness, but it often transmits more vibration into the cabin. It will not eliminate vibration entirely because some transmission to the chassis is necessary to support the engine. Choose a balance that fits your comfort and performance priorities.
How We Chose the Best Infiniti G37 Engine Mount
We prioritized parts that deliver correct fitment and proven durability for the Infiniti G37. Our selection process emphasized mounts engineered to match factory mounting points and torque characteristics, materials that resist oil and heat degradation, and designs that provide effective vibration isolation under typical driving loads. We also considered ease of installation, including whether mounts require special tools or subframe support, and the availability of clear installation guidance. Exclusions included units with unclear fitment data, unverified material claims, or insufficient technical documentation. We did not consider parts intended for other vehicle models or modified engine configurations. The key dimensions that mattered were bolt pattern alignment, bushing material and compliance, and overall mount geometry to maintain engine position and drivetrain alignment.
Our full evaluation process is outlined in our review methodology.
Conclusion
When choosing an Infiniti G37 engine mount, prioritize correct fitment, bushing material, and durability to ensure stable engine alignment and acceptable vibration isolation. Consider the tradeoffs between stiffness for torque control and compliance for cabin comfort, and factor in installation complexity when planning the replacement. Addressing a worn mount promptly prevents secondary damage and restores a smoother driving experience. Use the factors above to match the mount to your driving habits and maintenance preferences.
Explore More:
- Check out all Infiniti G37 parts & accessories
- Explore Engine
- Browse all Auto Parts
