Note: This article contains affiliate links. If you click on these links and make a purchase, I may earn a small commission at no extra cost to you. This helps support my research and content. Read my full affiliate disclaimer here.
Choosing the right Hyundai Elantra engine mount matters for ride comfort, drivetrain longevity, and safe vehicle control. A worn or incorrect mount can increase vibration, create noise, and place extra stress on connected components, so selecting a quality replacement matters for everyday driving. This guide covers seven shortlisted engine mounts chosen for fitment and durability. We evaluated each option against key criteria including material construction and mounting accuracy to help you find the best solution for your Elantra. Read on to see the top picks and what to consider when replacing a mount.
Looking for other parts? See all Hyundai Elantra parts & accessories.
Top Picks at a Glance
1. TRQ Right Engine Mount for Hyundai Elantra and Select Hyundai/Kia Models
| Brand Name | TRQ |
|---|---|
| Material Type | Alloy Steel |
| Item Type Name | Engine Mount |
| Manufacturer Warranty Description | 2 years |
This TRQ right engine mount replaces the passenger-side factory mount on compatible Hyundai and Kia vehicles and is intended as a direct-fit replacement to restore engine support and reduce vibration and impact noise. Typical use is straightforward: remove the worn mount and install the pre-assembled TRQ unit in the same mounting locations as the original. Notable features include a factory-style alloy steel construction and pre-assembly that simplifies installation for DIYers or independent shops. In practice the mount eliminates engine movement that causes bangs over bumps and returns normal drivetrain alignment, improving ride refinement and preventing accelerated wear to other components. Limitations are that it is a single-side replacement and compatibility is limited to the listed model years and applications, so buyers should confirm fitment before purchase. The product carries a two-year manufacturer warranty and benefits from TRQ's installation guides and videos to help with correct installation.
Best for: Buyers prioritizing reliability who want a straightforward, factory-quality replacement to stop engine movement, vibration, and impact noises and prefer parts they can install with basic tools and guidance.
Less Ideal for: Those seeking a full engine-mount overhaul or looking for upgraded performance mounts; also not suited to vehicles outside the specific model years listed.
- Direct-fit design for passenger-side replacement on listed Hyundai and Kia models
- Pre-assembled unit speeds installation and reduces need for modifications
- Alloy steel construction aimed at matching factory strength and durability
- Manufacturer provides DIY videos and a two-year warranty for support
- Only replaces the right/passenger-side mount so other mounts may still need inspection or replacement
- Fitment limited to specific model years and trims so compatibility must be verified before purchase
Verdict A practical, factory-style passenger-side replacement that restores engine stability and reduces bangs and vibration on the supported Hyundai and Kia models.
2. AA Ignition Engine and Transmission Mount Set of 3 for Hyundai Elantra 1.8L (Automatic)
| Compatible Vehicles | Hyundai Elantra 1.8L automatic (2011–2016) |
|---|---|
| Set Components | Front upper mount, front lower torque strut, left transmission mount |
| Material Type | Rubber |
| Brand | AA Ignition |
This AA Ignition kit supplies the three mounts that commonly wear out on Elantra 1.8L automatic cars: front upper engine mount, front lower torque strut, and left transmission mount. It is used to replace fatigued mounts that cause clunks, excessive engine movement, or vibration during acceleration, braking, or idle. The parts are marketed as direct factory-style replacements and include rubber formulated to resist cracking in cold weather, which helps with longevity in winter climates. Buyers report straightforward installs for most mounts and noticeably reduced vibration when the worn mounts are replaced. Expect some variability in fit for certain vehicles and tight spots during installation that may require basic hand tools or a floor jack to access mounting points. This kit is a practical way to restore engine stability and reduce noise without paying dealership prices, but some users noted occasional fitment adjustments or minor hardware issues that required extra work or washers to secure brackets properly.
Best for: Convenience-driven DIYers who want a single purchase that fixes common mount-related vibration and noise problems on a Hyundai Elantra 1.8L quickly and without dealer visits.
Less Ideal for: Shoppers seeking an exact OEM part with guaranteed pin-point fit or professional installers who prefer dealer-sourced components for warranty-backed service.
- Includes the three most commonly replaced mounts for the front of the Elantra to restore engine stability.
- Rubber compound advertised with anti-freeze resistance to reduce cracking in cold climates.
- Sold as a matched set so weight distribution and vibration damping are balanced across mounts.
- Multiple customer reports of reduced vibration and quieter operation after installation.
- Some buyers reported inconsistent fitment on certain vehicles requiring minor modifications or additional fasteners.
- Not a genuine factory part so quality can vary compared with OEM replacements.
Verdict A convenient, cost-effective three-piece replacement kit that reduces engine vibration on 2011–2016 Elantra 1.8L automatics, though fit can require minor adjustments.
3. ikasus 3-Piece Engine and Transmission Mount Kit for 2017-2018 Hyundai Elantra 2.0L
| Vehicle fitment | 2017–2018 Hyundai Elantra 2.0L AUTO Tran |
|---|---|
| Included components | Motor mount, torque strut mount, transmission mount |
| Material Type | Iron |
| Manufacturer | ikasus |
This 3-piece kit from ikasus replaces the motor mount, torque strut, and transmission mount on 2017–2018 Hyundai Elantra 2.0L automatics to restore engine stability and reduce vibration. The parts are described as iron with rubber elements to absorb vibration and are intended as direct replacements for the listed Hyundai part numbers. Installation is typical for mount swaps: lift/support the engine, unbolt the old mounts and fit the replacements; professional installation is recommended. In use the kit should noticeably reduce engine movement under acceleration and idling vibration, improving perceived drivability and shifting smoothness. Customers report good fit and improved NVH. Limitations are that the listing provides no installation instructions and the mounts come from an aftermarket brand rather than the factory, so long-term durability may vary versus factory-quality parts. Expect routine workshop labor and verify torque specs during installation.
Best for: Performance-oriented buyers looking to restore firm engine support and reduce drivetrain movement for a more responsive, less-vibratory driving feel.
Less Ideal for: Drivers seeking guaranteed factory-longevity or who prefer dealer-sourced parts with manufacturer warranty should consider OEM replacements instead.
- Complete three-piece set covers motor mount, torque strut, and transmission mount for a full replacement
- Designed to fit 2017–2018 Hyundai Elantra 2.0L automatic transmissions with listed part-number equivalents
- Rubber elements combined with metal construction to reduce engine vibration and improve cabin smoothness
- Reported good fitment by multiple buyers, reducing installation adjustments
- No installation instructions included, so DIYers need service manual or professional help
- Aftermarket brand with limited long-term track record compared with factory replacement parts
Verdict A practical aftermarket three-piece mount kit that tightens engine movement and reduces vibration for improved driving feel on 2017–2018 Elantra 2.0L, with the usual aftermarket durability trade-offs.
4. Baxzl Right Engine Motor Mount for Hyundai Elantra/Kona/Veloster (replacement)
| Brand Name | Baxzl |
|---|---|
| Mounting Type | Chassis Mount |
| Included Components | Motor Mount |
| Manufacturer Part Number | JZZJ-F2000 |
This Baxzl right engine motor mount is a direct replacement-style unit intended to restore engine support and reduce vibration on compatible Hyundai vehicles. It installs where the right-side engine mount sits and is used when a worn mount causes excess engine movement, vibration, or drivetrain noise. The listing identifies compatibility with 2017–2020 Elantra and Elantra GT, 2018–2020 Kona, and 2019 Veloster models and references common part numbers for matching. Buyers will appreciate the straightforward chassis-mount design and that the part is manufactured to the referenced factory specifications, which helps with fitment and bolt-up during DIY or shop installs. Practical benefits include quick replacement to reclaim cabin refinement and avoid stress on adjacent parts. Limitations are typical for budget replacements: long-term durability may vary compared with higher-end aftermarket or dealer parts and the product relies on correct part-number matching for proper fitment.
Best for: Buyers prioritizing low cost and practical repairs who want a straightforward replacement part to stop vibration and restore normal engine mounting without paying dealer prices.
Less Ideal for: Those seeking the longest-lasting or performance-tuned mounts or buyers who prefer parts with extended manufacturer warranties should consider higher-end alternatives.
- Marketed to match factory reference specifications for straightforward fitment
- Compatible with multiple Hyundai Elantra, Elantra GT, Kona and Veloster model years listed
- Simple chassis-mount design that is suitable for DIY or professional replacement
- Widely reported by users to fit correctly and restore normal engine support
- Durability and long-term lifespan may not match OEM dealer parts
- Limited manufacturer-backed warranty period compared with some premium brands
Verdict A budget-friendly, factory-style right engine mount that fits listed Hyundai models and restores engine support at a much lower cost than dealer parts.
5. Dtomi Engine and Transmission Mount Kit (3-Piece) for Hyundai Elantra 2011–2016
| Brand Name | Dtomi |
|---|---|
| Item Type Name | Engine Motor Mount & Transmission Mount |
| Included Components | 71047 A71020 A71029 (3PCS) |
| Material Type | Iron |
This Dtomi kit supplies the front upper motor mount, torque strut (front lower) and transmission mount as a matched set for compatible Hyundai Elantra automatic models. It is used when worn mounts cause engine vibration, noise, or driveline movement; you replace the bad mounts to restore steadier engine positioning and smoother idling. The parts are cast iron with rubber interfaces and arrive powder coated to resist corrosion. Buyers report straightforward fitment for most front mounts and noticeable reduction in vibration after installation. The kit includes the three specific mount pieces and lists the factory replacement part numbers for cross-reference, which helps confirm fit. Limitations to expect are the typical variability of aftermarket rubber components, occasional misaligned or twisted rubber on the torque strut that can complicate installation in tight spaces, and the need to confirm automatic-transmission fitment before ordering. Overall this kit is a practical, budget-friendly option for routine mount replacement when you want a full front-mount refresh without sourcing individual OEM parts.
Best for: Risk-averse mainstream buyers looking for a tested, cost-conscious replacement to stop engine vibration and restore everyday driving comfort without sourcing individual OEM parts.
Less Ideal for: Drivers who prefer exact OEM-branded components or professional shops seeking guaranteed factory-spec parts for high-mileage restorations should consider alternative factory-quality mounts.
- Three-piece matched set replaces front upper motor mount, torque strut, and transmission mount to restore engine stability
- Cast iron construction with powder-coated finish for corrosion resistance
- Includes cross-reference to many factory part numbers to simplify fit verification
- Customers commonly report reduced engine vibration and straightforward installation for accessible mounts
- Fit is limited to automatic-transmission models and requires confirming compatibility with specific Elantra submodels
- Some buyers reported twisted or misaligned rubber on the torque strut that made installation difficult in cramped locations
Verdict A practical, budget-focused three-piece mount kit that reduces vibration for compatible Elantra automatic models but requires careful fit confirmation and occasional attention during installation.
6. OCPTY Engine and Transmission Mount Set for 2017–2018 Hyundai Elantra 2.0L (3pcs)
| Compatible Vehicle | 2017-2018 Hyundai Elantra 2.0L Automatic |
|---|---|
| Set Contents | Right motor mount, front lower torque strut, left transmission mount |
| Material Type | beaded |
| Mounting Type | Internal Mount |
| Finish | Powder Coated |
This OCPTY three-piece mount kit replaces the right motor mount, front lower torque strut, and left transmission mount on 2017–2018 Hyundai Elantra 2.0L automatic cars. It is intended as a direct replacement to restore engine stability and reduce vibration and noise that develop when original mounts wear out. The set is marketed as durable and powder coated to resist corrosion, and the pieces are shaped to match factory mounting points for straightforward installation without specialty tools. In practice it gives a noticeable reduction in engine movement during acceleration and smoother idle compared with worn mounts. Expect a budget-friendly alternative to dealer parts that gets the job done for routine repairs, though a few users note the fit and material finish are not premium. If you want long-term, high-mileage durability or a performance-oriented upgrade, a higher-end option may be preferable, but for a practical, cost-conscious repair this kit covers the essential mounts you need to restore normal operation.
Best for: A practical optimizer looking to repair worn mounts on a 2017–2018 Hyundai Elantra 2.0L without overspending and who values straightforward, functional fixes.
Less Ideal for: Drivers seeking a long-term, high-mileage OEM-quality replacement or a performance mount upgrade should consider more expensive factory-quality options.
- Three-piece kit includes motor mount, torque strut, and transmission mount needed for common replacements
- Designed to match factory mounting points for relatively simple, bolt-on installation
- Powder-coated finish improves corrosion resistance compared with raw metal parts
- Packaged specifically for 2017–2018 Hyundai Elantra 2.0L automatic fitment
- Material quality and finish are not as premium as higher-end or OEM replacements
- May not provide the long-term durability of more expensive factory-quality mounts
Verdict A cost-conscious, bolt-on mount kit that restores engine stability on 2017–2018 Elantra 2.0L models but stops short of premium, long-term durability.
7. A-Premium 3‑Piece Engine and Transmission Mount Set (fits Hyundai Elantra/Accent/Veloster/Kia Rio/Forte)
| Included components | Front lower torque strut mount, front right motor mount, left transmission mount |
|---|---|
| Material Type | Alloy Steel |
| Mounting Type | Corner Mount |
| Vehicle fitment note | Fits automatic-transmission L4 Hyundai/Kia models listed in description |
This A-Premium kit supplies a front right motor mount, a left transmission mount, and a front lower torque strut designed for automatic-transmission four-cylinder Hyundai Elantra and related models. It is used to replace worn mounts that cause engine vibration, harshness, and drivetrain movement; installation is a typical DIY or shop job that may require removing the battery, airbox, and wheel for access. The mounts are alloy-steel construction and the listing says they undergo durability testing to meet factory-quality dimensions, which users report fits and quiets vibration when properly installed. Common practical benefits are improved ride comfort and reduced engine movement under acceleration, and the set covers the main wear points so you can replace multiple mounts at once. Some owners note the parts feel stiffer than OEM which can slightly increase road harshness, and a few reports indicate variable long-term durability, so longevity may differ by driving conditions and installation. A one-year unlimited-mileage guarantee covers part replacement only.
Best for: Balanced all-round buyers who want a cost-effective, full mount replacement to restore ride comfort and drivetrain control without hunting individual parts.
Less Ideal for: Drivers seeking the softest possible ride or guaranteed long-term durability under heavy use should consider higher-end or OEM replacement mounts and professional inspection before purchase.
- Complete three-piece kit replaces the main worn mounts at once, avoiding piecemeal repairs
- Alloy steel construction with factory-quality fitment intent for direct replacement
- Reported to fit Hyundai Elantra applications with straightforward bolt-up installation
- Reduces engine vibration and drivetrain movement, restoring smoother operation
- Some units are firmer than OEM which can transmit more road harshness to the cabin
- Customer reports show mixed long-term durability in heavy-use applications
Verdict A practical, budget-friendly three-piece mount kit that restores engine stability for compatible Elantra models but may feel firmer than factory mounts over rough roads.
Choosing the Right Hyundai Elantra Engine Mount: Key Factors to Consider
Fitment and Alignment
Accurate fitment is essential because engine mounts position the engine and transmission relative to the chassis. A mount that does not match the Elantra's mounting points or raises the engine at a different angle can cause driveline binding, increased wear, and abnormal vibration. Verify bolt pattern, stud locations, and overall height tolerances to ensure the mount sits flush and aligns with existing components.
Poor alignment can also affect attachment hardware and lead to accelerated loosening or fatigue. Choosing a mount with precise dimensional specs reduces the risk of additional repairs after installation.
Material and Elastomer Quality
The elastomer compound and any bonded metal components determine how well a mount absorbs vibration and resists cracking over time. Higher-quality rubber formulations or multi-density compounds usually provide better isolation across a range of engine speeds while remaining resistant to oil and heat exposure common in engine bays.
Metal components, such as brackets and sleeves, should be corrosion resistant and precisely formed. Durable materials help the mount maintain its properties longer and avoid failures that can create noise or excessive movement.
Load Capacity and Reinforcement
A mount must support both static engine weight and dynamic loads from acceleration, braking, and road impacts. Check rated load capacity or design features like internal reinforcement that improve resilience under repeated stress. Reinforced mounts or those with additional structural features tend to control engine movement better under torque events.
Selecting a mount with appropriate load handling reduces transmission of force to the chassis and improves perceived solidity while driving.
Vibration Isolation Characteristics
Different mounts are tuned for varying tradeoffs between firmness and isolation. Softer mounts isolate vibration more effectively at cruising speeds but may allow perceptible engine movement during acceleration. Firmer mounts reduce movement but can transmit more vibration into the cabin. Consider the type of driving you do most often and choose a mount that balances these tradeoffs for comfort and control.
Look for descriptions of damping behavior or design features intended to reduce specific frequency ranges associated with engine operation to match your comfort priorities.
Hardware and Installation Ease
Complete mounting kits that include the correct bolts, washers, and sleeves simplify installation and reduce the chance of using incorrect hardware. Ease of installation also depends on whether the mount requires engine support, lifting, or special tools. A design that allows installation with common hand tools will lower labor time and the potential for incorrect torqueing.
Clear instructions and included hardware reduce installation errors that can lead to premature wear or failure.
Durability and Environmental Resistance
Engine mounts are exposed to heat, oil, road salt, and moisture. Components that resist chemical degradation and corrosion will last longer in real-world conditions. Look for corrosion-resistant coatings on metal parts and elastomer compounds rated for oil and heat exposure relevant to engine bays.
Durability features limit the frequency of replacements and maintain consistent performance over the life of the mount.
FAQ
What are common symptoms of a failing engine mount on a Hyundai Elantra?
Common signs often include increased vibration felt in the cabin, especially at idle, unusual clunking or banging during acceleration or when shifting, and noticeable engine movement when revving. You may also notice alignment-related issues like driveline vibration at higher speeds. These symptoms usually indicate the mount is no longer isolating or securing the engine properly.
Can I replace a Hyundai Elantra engine mount myself?
Many owners can perform a mount replacement if they have basic mechanical skills, an engine support method, and the right tools. The job often involves supporting the engine, removing mounting bolts, and installing the new unit with proper torque. If the task requires lifting heavy components or working in tight spaces, professional help is advisable to ensure safe and correct installation.
How long do engine mounts typically last on a Hyundai Elantra?
Mount lifespan varies with driving conditions, exposure to oil or heat, and build quality. Under normal driving conditions, mounts can last many years, but severe exposure or repeated heavy loads will shorten service life. Regular inspection for cracking, oil saturation, or excessive movement helps catch issues before they cause other damage.
Will replacing engine mounts reduce vibration and noise?
Replacing worn mounts usually reduces vibration transmitted to the cabin and can eliminate related noise like clunks or bangs. The extent of improvement depends on choosing a mount with appropriate damping characteristics and ensuring correct fitment. Some mounts prioritize firmness and may reduce movement at the expense of transmitting more high-frequency vibration.
Should I choose an OEM-style mount or an aftermarket alternative?
Both options can be valid depending on priorities. OEM-style mounts are often engineered to match original damping and fitment, while aftermarket units may offer different tuning or enhanced materials. Consider fitment accuracy, material specs, and warranty or support when deciding, and verify compatibility with Hyundai Elantra mounting points.
Does replacing engine mounts require new bolts or hardware?
Some replacements include new hardware, while others do not. Using the correct-grade bolts and proper torque is important for safety and longevity. If the old hardware shows corrosion or stretching, it is wise to replace it with appropriate new fasteners to ensure secure mounting.
How We Chose the Best Hyundai Elantra Engine Mount
We focused on mount options that match Hyundai Elantra factory fitment and that use durable materials suited to normal driving conditions. Our evaluation prioritized mounting accuracy and dimensional tolerance to minimize misalignment, as well as elastomer quality and reinforcement features that directly affect vibration isolation and lifespan. We also considered ease of installation in typical home or shop settings, compatibility with the engine and transmission mounting points, and general build quality indicators such as corrosion-resistant hardware. We excluded units that lacked clear fitment data for the Elantra, mounts intended for race-only applications, and products with unclear materials or missing hardware. The final list favors solutions that balance vibration control, secure positioning, and straightforward installation for owners seeking a reliable replacement.
Our full evaluation process is outlined in our review methodology.
Conclusion
When choosing a Hyundai Elantra engine mount, prioritize accurate fitment, material quality, and the mount's vibration isolation characteristics. Those factors most directly affect ride comfort, drivetrain stress, and long-term durability. Balance firmness against isolation based on your driving habits, and confirm the mount includes or matches the correct hardware for safe installation. Regular inspection after installation will help you catch any issues early and maintain a smooth, secure ride.
Explore More:
- Check out all Hyundai Elantra parts & accessories
- Explore Engine
- Browse all Auto Parts
