Note: This article contains affiliate links. If you click on these links and make a purchase, I may earn a small commission at no extra cost to you. This helps support my research and content. Read my full affiliate disclaimer here.
A faulty engine mount can cause vibration, clunks, and uneven power delivery that affect daily driving and long trips. Choosing the right GMC Sierra engine mount matters because the wrong unit can leave you with persistent noise, premature wear of related components, or installation headaches. This guide shortlists the top options for GMC Sierra applications and explains the practical tradeoffs buyers typically face. We evaluated each candidate for durability and fitment accuracy, plus ease of installation and expected longevity. Read on to find the options that best match your use case and symptom profile.
Looking for other parts? See all GMC Sierra parts & accessories.
Top Picks at a Glance
| Best Reviewed A top-rated pick with lots of positive feedback | Patewin Engine Motor Mount Kit with Heat Shield, 2-Pack |  |
| Most Popular A crowd favorite that many people choose with confidence | Mardarth Engine Motor Mount with Heat Shield, 2-Pack (fits 2007–2013 Sierra 1500) |  |
| Best Quality Built to a higher standard if you want something more solid | Vinsyut Engine Mount Set for 2021–2023 Cadillac Escalade / Chevrolet Tahoe / GMC Sierra 1500 |  |
| Best Budget The cheapest option that still gets the job done reliably | DOCAS Front Left Engine Motor Mount (84175583) |  |
| Most Sold A high-volume bestseller chosen again and again | iKer 2-Pack Engine Motor Mount Kit with Heat Shield Compatible with GMC Sierra 1500 (2007–2013) |  |
| Best Value for Money The sweet spot between price and what you get | Mardarth Replacement Front Motor and Transmission Mounts — Set of 3 |  |
| Best Overall The best all-around choice for most situations | ENA Front Engine and Transmission Mount Set (A5365) |  |
1. Patewin Engine Motor Mount Kit with Heat Shield, 2-Pack
| Unit Count | 2.0 Count |
|---|---|
| Manufacturer | PATEWIN |
| Model | Engine Mount Motor |
| OEM Part Number | 15854941 15854939 |
This Patewin engine motor mount kit replaces the front left and right mounts and is designed to restore engine stability and reduce vibration in affected vehicles. Installers typically fit these from beneath the front of the engine where the mounts bolt to the block; the kit includes preattached heat shields and rubber-lined mount bodies intended to dampen noise and engine movement. In practice the mounts match factory fit points so they slip into place for most installations, though some users needed to bend the heat shield slightly to access upper bolts. The rubber compound is described as a durable natural/SBR blend with anti-freeze treatment to resist cracking in cold climates, which supports long service life for reliability-focused buyers. Expect a straightforward replacement for worn or failing mounts that reduces clunks and engine bounce, but plan for a moderately hands-on job with a swivel socket, long extension, and basic mechanical experience for proper installation.
Best for: Reliability-focused owners who prioritize restoring factory-level ride smoothness and long-term durability on their GMC Sierra and prefer a parts-first repair over more extensive engine work.
Less Ideal for: Drivers seeking a plug-and-play, no-tools installation or those unwilling to work under the vehicle should consider professional installation or alternative solutions.
- Designed to match factory fit points for direct replacement on compatible vehicles
- Preattached heat shield protects the mount and surrounding components
- Rubber-lined mount body reduces engine vibration and cabin noise
- Anti-freeze treated rubber to resist cracking in cold climates
- Heat shield holes may not align perfectly with engine block bolts, sometimes requiring bending to access fasteners
- Installation can be awkward beneath the engine and benefits from a swivel socket and long extension
Verdict A budget-friendly, factory-fit replacement kit that restores engine stability for Sierra owners willing to do a hands-on installation.
2. Mardarth Engine Motor Mount with Heat Shield, 2-Pack (fits 2007–2013 Sierra 1500)
| Fitment years | 2007-2013 |
|---|---|
| Fitment model | Sierra 1500 |
| Includes | 2 pieces with heat shields |
| Manufacturer | Mardarth |
This two-piece engine motor mount set from Mardarth is a direct-replacement style mount intended for the 2007–2013 GMC Sierra 1500 and installs in place of the factory mounts to secure the engine and damp engine vibration. Each mount includes a stamped heat shield and rubber lining to isolate vibration and protect nearby components from heat; buyers report the bolt patterns and alignment match the factory points in most cases. Typical use is a like-for-like replacement when an original mount shows wear, tearing, or excess engine movement. Installation can be done in a home garage by a competent DIYer or a technician, but access around the wheel well and exhaust heat shield may be required and some bending of the heat shield might be needed to fit in tight spots. The mounts come as a matched pair so you replace both sides at once, which helps restore original engine position and reduce driveline vibration. Some customers noted the heat shield bolt holes can be slightly misaligned, so expect minor fitting adjustments during installation.
Best for: A convenience-driven buyer who wants a ready-made, vehicle-specific replacement that gets a Sierra 1500 back on the road quickly without hunting for individual parts.
Less Ideal for: Drivers who prioritize an exact factory-spec match or long-term high-mileage longevity may prefer purchasing a factory-quality replacement from a dealership or specialist supplier.
- Sold as a matched pair so both engine sides can be replaced at once
- Includes heat shields to protect surrounding components from exhaust heat
- Rubber-lined design reduces engine vibration and improves ride comfort
- Reported to align with factory mounting points in most installations
- Heat shield bolt holes may require minor bending or adjustment to fit on some vehicles
- Long-term durability compared with OEM units is not verifiable from the listing
Verdict A practical, vehicle-specific replacement set that restores engine support and reduces vibration for 2007–2013 GMC Sierra 1500s, though minor heat shield fitting tweaks may be needed.
3. Vinsyut Engine Mount Set for 2021–2023 Cadillac Escalade / Chevrolet Tahoe / GMC Sierra 1500
| Vehicle Fitment | 2021–2023 Cadillac Escalade, Chevrolet Tahoe, Chevrolet Suburban, GMC Sierra 1500 (5.3L/6.2L) |
|---|---|
| Included Components | Engine mount set |
| Manufacturer | vinsyut |
| Unit Count | 2.0 Count |
This Vinsyut engine mount set replaces the front left and right motor mounts on 2021–2023 GMC Sierra 1500 and closely related GM 5.3L/6.2L applications to firm up engine positioning and cut down vibration and drivetrain lash. Intended as a direct-fit replacement, the kit includes the two primary motor mounts with integrated heat shields and is used during service to restore ride smoothness and reduce clunking on acceleration or at idle. Construction calls out high-strength steel and rubber bushings which translate into tighter engine control and improved NVH compared with aged, collapsed mounts. Practical benefits include easier installation when supported correctly, and the set approach makes sense for owners who want consistent response across both sides of the engine. Limits to expect are typical of aftermarket mounts: rubber compliance versus stiffness is a balance, and longevity can vary versus factory parts depending on driving conditions. Verify part references and torque to spec during installation to avoid fitment or fastener issues.
Best for: Performance-oriented owners who prioritize firmer engine control and reduced drivetrain movement on a Sierra 1500 and want a quality aftermarket replacement that improves vehicle responsiveness.
Less Ideal for: Owners seeking an exact factory-source part or maximum OEM longevity who prefer dealer-sourced factory replacement components should consider factory-quality alternatives.
- Direct replacement fit for 2021–2023 GMC Sierra 1500 front mounts (matches listed part references)
- Integrated heat shields protect mounts from nearby exhaust heat
- High-strength steel construction aimed at improved durability over worn originals
- Designed to reduce vibration and drivetrain movement for smoother acceleration and idle
- Aftermarket rubber hardness and longevity can vary compared with factory-quality mounts
- Only the primary front mounts are included in this kit so additional mounts may be needed for a full refresh
Verdict A solid aftermarket option to tighten up engine control and reduce vibration on a 2021–2023 GMC Sierra 1500, but expect typical aftermarket variability in rubber durability and you may need additional mounts for a complete refresh.
4. DOCAS Front Left Engine Motor Mount (84175583)
| Manufacturer | DOCAS |
|---|---|
| Part Number | 84175583 |
| Finish Type | Coated |
| Included Components | 1 x motor mount |
This DOCAS front left motor mount is built as a direct factory-quality replacement for part number 84175583 and is intended to restore engine support and reduce vibration on compatible GMC Sierra 1500 models. Installation replaces the worn factory mount and is typically done during a service where the engine is slightly lifted to remove and bolt in the new unit. The mount features rubber that has passed hardness and compression testing and includes a coated metal bracket and a flexible heat shield. In everyday driving it should reduce vibration and engine movement similar to a factory unit. Practical benefits are straightforward fitment to supported Sierra model years and a solid, heavy-duty metal construction. Limitations are typical for aftermarket mounts: heat shields may need minor reshaping for perfect fit and installation in tight four-wheel-drive locations can be awkward and may require extra time or assistance. Long-term durability matches OEM expectations but will depend on driving conditions and installation quality.
Best for: Budget-conscious buyers who prioritize a low-cost, factory-style replacement to restore engine stability and reduce vibration on their GMC Sierra and want a practical parts-for-service approach.
Less Ideal for: Those seeking a performance or vibration-isolating upgrade beyond factory characteristics or owners who prefer fully plug-and-play parts that never require minor adjustments during install.
- Direct replacement for factory part 84175583 for compatible Sierra models
- Rubber tested for hardness and compression to help reduce engine vibration
- Coated metal bracket and substantial construction resist corrosion and feel heavy-duty
- Includes a flexible heat shield that can be adjusted for fit
- Heat shield may arrive bent and require straightening or minor modification
- Installation can be difficult in tight locations and may need a helper or shop tools
Verdict A heavy-duty, budget-friendly factory replacement for the Sierra's front left engine mount that restores stability but may need minor fitment tweaks during installation.
5. iKer 2-Pack Engine Motor Mount Kit with Heat Shield Compatible with GMC Sierra 1500 (2007–2013)
| Fitment | GMC Sierra 1500 2007-2013 |
|---|---|
| Unit Count | 2.0 Count |
| Mounting Type | Engine Bay Mount |
| Manufacturer | iKer |
This iKer two-pack replaces both left and right engine mounts on a GMC Sierra 1500 (2007–2013) and includes heat-shielding for the trans mount area. It is used to secure and position the engine, reduce vibration transfer to the chassis, and restore smoother idle and drive feel after worn mounts are removed. The kit pairs metal mounting components with molded rubber to balance durability and vibration damping, and reviewers report straightforward fit for Sierra installations when following removal of factory heat shields. Practical benefits include replacing two mounts at once for matched performance and a potentially lower-cost aftermarket option versus dealer parts. Expect some variability in material thickness compared with factory-quality mounts and the heat shields may require reusing the vehicle's original shields during installation. Installation can be awkward on certain Sierra configurations and may require moderate mechanical experience or a shop for the driver-side mount.
Best for: Risk-averse mainstream GMC Sierra owners looking for a ready-to-install replacement that restores everyday drivability without experimental upgrades.
Less Ideal for: Drivers who demand OEM-identical parts or who plan heavy-duty towing and need heavy-duty or performance-grade mounts should consider factory-quality or reinforced alternatives.
- Sold as a matched two-pack to replace both driver and passenger mounts at once
- Includes heat-shielding features intended for transmission/engine bay protection
- Metal and rubber construction aimed at balancing strength and vibration isolation
- Fits GMC Sierra 1500 models from 2007–2013 according to the listing
- Material appears thinner than factory mounts in some user reports which may affect long-term durability
- Installation can be difficult on the driver side and may require extra labor or tools
Verdict A budget-friendly matched two-pack that restores vibration control for 2007–2013 GMC Sierra 1500s but may feel lighter than factory mounts and can be tricky to install on the driver side.
6. Mardarth Replacement Front Motor and Transmission Mounts — Set of 3
| Fitment | 2007–2013 Sierra 1500 V8 4WD |
|---|---|
| Unit count | 3.0 Count |
| Manufacturer | Mardarth |
| Manufacturer Part Number | M-941-3 |
This kit provides the left and right front engine mounts plus the 4WD transmission mount intended as factory-replacement pieces for 2007–2013 GMC Sierra 1500 with V8 engines. Installation is the standard repair: support the engine or transfer case, remove the old mounts and bolts, and refit the new mounts in the same locations. Notable features include matched hardware locations and an included heat shield on at least one mount, which reviewers say helps with fit and avoids sourcing separate parts. In practice the mounts deliver a solid, OEM-like fit and reduce engine movement when accelerating or shifting. Some buyers report tight bolt hole alignment that usually lines up but may require minor bending of the heat shield or patience getting bolts started, so expect typical installation grunt work and the need for extensions and a support jack. Long-term durability is still user-reported rather than factory-certified, but customer feedback shows consistent fitment and value compared with dealer parts.
Best for: Practical optimizers who want the most reliable factory-style replacement for a GMC Sierra 1500 V8 without paying dealer prices and are comfortable doing a hands-on repair or supervising a shop install.
Less Ideal for: Drivers who want a lifetime performance upgrade or who prefer guaranteed long-term warranties from OEM-level suppliers should consider higher-end or dealer-sourced options instead.
- Sold as a complete three-piece kit covering both front motor mounts and the 4WD transmission mount
- Fits 2007–2013 Sierra 1500 V8 4WD applications and includes a heat shield on the motor mount
- Multiple customers report accurate alignment and solid, factory-replacement style fit
- Some heat shield bolt holes may need slight modification to fit perfectly
- Installation can be fiddly and may require jack support, extensions, and time
- Long-term lifespan is based on user reports rather than published durability specifications
Verdict A cost-conscious, full three-piece motor/transmission mount kit that delivers factory-style fit for 2007–2013 GMC Sierra 1500 V8 4WD with solid value but requires typical installation effort.
7. ENA Front Engine and Transmission Mount Set (A5365)
| Fitment | GMC Sierra 1500 2007–2013 V8 5.3L/6.0L/6.2L |
|---|---|
| Set contents | 2 front engine mounts and 1 rear transmission mount |
| Mount material | Composite metal and rubber |
| Manufacturer part number | ENAMMS137303 |
This ENA mount set replaces the two front engine mounts and the rear transmission mount on compatible GMC Sierra 1500 V8 trucks. It is intended as a direct-fit factory-replacement style kit that reduces engine vibration and noise and restores proper powertrain alignment after worn mounts are removed. Typical installation requires lifting or supporting the engine and accessing hard-to-reach bolts, especially on 4×4 trucks, so expect a moderately difficult DIY job or a short shop labor hour. The mounts use composite metal and rubber construction and include the transmission mount and two front mounts; buyers report the parts fit like factory pieces and noticeably reduce clunking and vibration. Some installers note the heat shield alignment can require swapping or slight modification and that the rubber feels a bit softer than some factory hydraulic units, which may allow more engine movement on startup. For a balanced buyer looking for a reliable aftermarket replacement at a lower cost than dealer parts, this set delivers good value with common installation challenges to plan for.
Best for: Balanced buyers who want a cost-effective, factory-style replacement that restores NVH control and drivetrain alignment on a 2007–2013 GMC Sierra 1500 V8 without paying dealer prices.
Less Ideal for: If you prioritize an exact factory hydraulic feel or want a part designed to eliminate every bit of startup flex, a different factory-specified mount or a branded OEM part may be a better choice.
- Direct-replacement design for a proper fit on compatible 2007–2013 Sierra 1500 V8 applications
- Includes both front engine mounts and the rear transmission mount so you can replace the whole set at once
- Composite metal and rubber construction aimed at vibration and noise reduction
- Widely reported as durable in real-world use with many buyers seeing long service life
- Installation can be labor intensive and requires engine support and access to concealed fasteners on 4×4 trucks
- Some heat shield holes may not align perfectly with the included shield requiring reuse or minor modification of the factory shield
Verdict A practical, lower-cost factory-style replacement set that restores stability and reduces vibration on compatible GMC Sierra 1500 V8 trucks while requiring moderate installation effort.
Choosing the Right GMC Sierra Engine Mount: Key Factors to Consider
Fitment and Compatibility
Correct fitment matters because engine mounts locate the powertrain precisely. If bolt patterns, stud locations, or thicknesses do not match, installation can be difficult or impossible. Even small dimensional mismatches can change engine position, which affects driveline alignment and can cause driveline vibration or premature wear of connected components.
When choosing a mount, verify the mounting interface and orientation for the specific GMC Sierra model and engine combination. Parts that reference exact chassis codes or engine families reduce the risk of a poor fit. Consider whether brackets or adapter plates are required and factor that into planning for installation time and complexity.
Vibration Damping Performance
The core job of an engine mount is to absorb and isolate vibration from the engine and drivetrain. Different mount constructions control vibration differently, with softer compounds reducing idle and low-frequency shake, while firmer designs can minimize movement under heavy load.
Think about your typical use: highway commuting, towing, or performance driving. A mount that balances comfort and control will reduce noticeable engine vibration inside the cabin without allowing excessive engine movement that could stress hoses and linkages.
Durability and Material Quality
Materials and manufacturing quality drive how long a mount will last in service. Look for mounts with reinforced rubber, bonded metal faces, or hydroformed sections where applicable. Resistant coatings on metal parts help prevent corrosion in regions with road salt or humidity.
Durability impacts lifecycle cost and reliability. A marginally stiffer but longer-lasting mount can be preferable to a softer unit that degrades quickly, especially if the vehicle is used for towing or operates in harsh environments.
Installation and Serviceability
Some mounts are straightforward to install with routine hand tools, while others require engine support, special tools, or dropping subframes. Ease of installation affects labor time and the likelihood you can perform the replacement yourself.
Consider whether the mount includes new fasteners and alignment sleeves, or if existing bolts must be reused. Clear installation access, comprehensive hardware, and documented torque specifications make a job more predictable and reduce the chance of rework.
Noise and Harshness Characteristics
Mount design influences how noise and harshness transmit into the cabin. A softer mounting element often reduces noise at idle but can allow clunking or increased noise under sudden throttle or gear changes. Firmer mounts improve control but may transmit more engine character.
Balance these traits against vehicle use. If quiet daily driving is the priority, prioritize mounts designed to minimize noise. For work or towing, prioritize mounts that control movement and prevent impact on hoses and linkages.
Maintenance Lifecycle and Replacement Planning
Engine mounts are wear items that eventually require replacement. Consider expected service life and how mounting failure signs present themselves, such as increased vibration, visible rubber cracks, or oil contamination of the mount element.
Plan for inspection intervals and know whether adjacent components should be serviced at the same time. Replacing multiple mounts at once can restore original alignment and reduce total labor compared with staggered replacements.
FAQ
What are common symptoms of a failing engine mount on a GMC Sierra?
Common signs often include increased vibration at idle or while accelerating, clunking noises during gear changes or when shifting between drive and reverse, and noticeable engine movement under load. You may also observe accelerated wear on hoses or exhaust hangers if the engine shifts excessively.
Can I perform an engine mount replacement myself?
Whether you can depends on your tools and experience. Some mounts are accessible with standard tools and an engine support jack, while others require supporting the engine from below or removing components for access. Review the vehicle-specific service procedure and be prepared to follow torque specs and safety procedures.
How long do engine mounts typically last?
Service life depends on materials and operating conditions but usually ranges from several years to over a decade. Vehicles used for towing, heavy loads, or driven in harsh climates may see faster deterioration, while normal commuting often extends mount life.
Will a stiffer mount reduce vibration?
A stiffer mount can reduce engine movement and improve perceived stability, especially under load. However, it may transmit more engine noise and harshness into the cabin. Choosing the right balance depends on whether comfort or control is your priority.
What causes engine mounts to fail prematurely?
Common causes include exposure to oil or coolant that degrades rubber components, frequent heavy loads or towing that increase stresses, and corrosion of metal parts that compromises mounting integrity. Poor initial fitment or installation errors can also lead to early failure.
Are there installation cost differences between mount types?
Installation complexity varies by mount design and vehicle access. Units that require dropping components or supporting the engine from below typically incur higher labor time. Simpler replacements with direct access are usually quicker to install, which reduces labor hours.
How We Chose the Best GMC Sierra Engine Mount
We selected products that meet practical durability and fitment expectations for GMC Sierra owners. Our editorial filters prioritized materials and construction quality, factory-correct mounting points and dimensions, and vibration-damping performance under typical driving loads. We also considered installation friendliness, including access to mounting hardware and whether standard tools and procedures suffice. Longevity indicators such as reinforced rubber compounds, bonded-metal designs, and corrosion-resistant finishes were important when assessing likely service life. Exclusions included units with unclear fitment data, poor user feedback about premature failure, or designs that required extensive vehicle modification. The result is a list focused on parts that balance reliable vibration control, accurate fitment, reasonable installation effort, and durable construction for GMC Sierra applications.
Our full evaluation process is outlined in our review methodology.
Conclusion
Prioritize correct fitment, vibration control, and durable construction when selecting a GMC Sierra engine mount. Think about how you use the vehicle and whether you value a softer mount for comfort or a firmer unit for load control. Also factor in installation complexity and expected service life so you can plan maintenance and avoid secondary wear on adjacent components. Balancing those tradeoffs will help you choose a mount that restores quiet operation and solid drivetrain alignment without introducing new issues.
Explore More:
- Check out all GMC Sierra parts & accessories
- Explore Engine
- Browse all Auto Parts
