Note: This article contains affiliate links. If you click on these links and make a purchase, I may earn a small commission at no extra cost to you. This helps support my research and content. Read my full affiliate disclaimer here.
Picking the right engine mount for a Ford Escape matters because mounts control engine movement, affect ride comfort, and influence drivetrain longevity. If a mount is worn or poorly matched, you may notice extra vibration, clunks during shifts, or premature wear on related components. This guide covers seven shortlisted engine mounts chosen for their fit and expected performance. We evaluated noise and vibration control, durability, and installation practicality to help you focus on mounts that will stabilize the engine and restore a smoother driving experience.
Looking for other parts? See all Ford Escape parts & accessories.
Top Picks at a Glance
| Best Reviewed A top-rated pick with lots of positive feedback | A-Premium 3‑Piece Engine and Transmission Mount Kit for Ford Escape / Transit Connect |  |
| Most Popular A crowd favorite that many people choose with confidence | ENA Engine and Transmission Mount Set (3-piece) for Ford Focus 2.0L |  |
| Best Quality Built to a higher standard if you want something more solid | PHILTOP Engine Motor Mount Set for 2005–2012 Ford Escape (Set of 4) |  |
| Best Budget The cheapest option that still gets the job done reliably | Marketplace Auto Parts Rear Engine Mount for Ford Escape |  |
| Most Sold A high-volume bestseller chosen again and again | Yllhaoyuan 3-Piece Engine Motor Mount Set for 2013–2016 Ford Escape 2.0L/2.5L |  |
| Best Value for Money The sweet spot between price and what you get | Yllhaoyuan Complete 3-Piece Engine and Transmission Mount Set for Ford Escape (2013–2019) |  |
| Best Overall The best all-around choice for most situations | LOONGRIE Engine Motor Mount Set for Ford Escape / Mazda Tribute / Mercury Mariner (Set of 4) |  |
1. A-Premium 3‑Piece Engine and Transmission Mount Kit for Ford Escape / Transit Connect
| Fitment | Ford Escape 2013-2016 L4 2.0L/2.5L; Transit Connect 2014-2021 L4 2.5L (automatic transmission) |
|---|---|
| Set contents | Front motor mount, upper transmission mount, lower transmission mount |
| Manufacturer part number | APEM154 |
This three-piece mount kit is designed to replace the front engine mount plus the upper and lower transmission mounts on 2013–2016 Ford Escape and 2014–2021 Transit Connect models with automatic transmissions. Each mount in the kit is built to meet factory-spec fit and is intended for a direct replacement during routine repair or when vibration and drivetrain movement become noticeable. Buyers will appreciate the kit approach because replacing all related mounts at once reduces repeat labor and helps restore smoothness and NVH levels. The listing notes extensive testing and a one-year unlimited-mileage guarantee, which provides some reassurance about durability. Limitations to expect are typical of aftermarket mounts: longevity can vary with driving conditions and one review reported a missing piece on arrival, so inspect the kit on delivery. Installation is straightforward for a mechanically inclined DIYer or a shop, but alignment and torque sequence matter for proper performance.
Best for: Reliability-focused buyers who prioritize restoring factory-like smoothness and reducing drivetrain vibration without repeatedly paying shop labor, and who prefer replacing all related mounts in a single service.
Less Ideal for: Drivers seeking an OEM-branded part or the absolute longest-lasting factory-spec mount under heavy-duty use should consider dealer or premium OEM replacements instead.
- Complete three-piece kit addresses engine and transmission mounts at once to reduce future labor
- Designed to match factory fit and replace the specified mounting points directly
- Multiple customer reports of improved vibration reduction and good fitment on Ford Escape
- One customer reported missing mounts in a shipment so inspect kit contents on arrival
- Durability can vary compared with factory parts depending on driving conditions
Verdict A budget-friendly, complete mount kit that reliably reduces vibration and restores drivetrain stability for the specified Ford models, with the usual aftermarket variability in longevity.
2. ENA Engine and Transmission Mount Set (3-piece) for Ford Focus 2.0L
| Vehicle fitment | Ford Focus 2008–2011 2.0L |
|---|---|
| Number in pack | 3 |
| Mount material | Rubber |
| Mounting locations | Front, Lower, Rear Right, Transmission |
This ENA three-piece mount kit replaces the engine and transmission mounts that isolate vibration and hold the powertrain in place. It is typically used when worn mounts cause excessive engine movement, driveline vibration, or noise at idle and under acceleration. The set includes a lower torque strut, a transmission mount, and a front right motor mount made with rubber components to dampen vibration. In practice the parts fit the factory mounting points and let you reuse the vehicle brackets in many installations, which can speed up home repairs. Users report noticeably quieter operation and reduced stress on exhaust components after installation. Important limitations are variable build tolerance and occasional need to ream or adjust bolt holes for proper alignment, and some customers have reported premature failure on individual pieces, which suggests mixed long-term durability compared with higher-end replacements. Installation may require basic hand tools, a jack to support the engine, and familiarity with Focus mounting brackets.
Best for: Convenience-driven buyers who want an affordable, ready-made kit to stop vibration and get their vehicle back on the road quickly with a DIY-friendly installation approach.
Less Ideal for: Drivers seeking the longest-lasting, heavy-duty or performance-oriented mounts should consider premium replacement options or OEM-grade parts instead.
- Three-piece kit replaces common failed mounts to quickly reduce vibration
- Rubber construction helps dampen engine noise for a more comfortable ride
- Direct-replacement design fits factory mounting points and allows reuse of existing brackets
- Widely reported easy installation for DIYers with basic tools
- Some units require minor modification to bolt holes for correct alignment
- Build quality appears inconsistent with occasional reports of early failure
Verdict A practical, easy-to-install 3-piece replacement kit that restores quiet operation quickly but may show mixed long-term durability.
3. PHILTOP Engine Motor Mount Set for 2005–2012 Ford Escape (Set of 4)
| Vehicle fitment | 2005–2012 Ford Escape; select Mazda Tribute and Mercury Mariner models |
|---|---|
| Package contents | Front motor mount A5446, Front left A5481, Rear A5412, Transmission A5441 |
| Materials | Natural rubber and metal |
| Manufacturer part numbers | Includes A5412, A5441, A5481, A5446 |
This PHILTOP set supplies four replacement mounts — front motor mount, front left motor mount, rear motor mount, and transmission mount — sized to fit Ford Escape model years 2005–2012 and compatible Mazda Tribute and Mercury Mariner years listed by the manufacturer. Designed to match factory mounting geometry, the mounts use metal and natural rubber to absorb high-frequency vibration and lower cabin noise while restoring engine stability under acceleration and during gear changes. Buyers report straightforward installation and noticeably reduced vibration compared with old, hardened mounts. The kit follows factory layouts so it is suitable for DIY installation with basic tools or for a shop swap. Limitations are typical for aftermarket rubber mounts: they improve NVH and comfort but are not a performance upgrade for high-power or track use, and long-term durability will vary with driving conditions. Confirm vehicle fitment and OEM part number compatibility before ordering.
Best for: Performance-oriented buyers who prioritize restoring engine stability and reducing vibration on a Ford Escape and want a factory-style replacement that delivers improved NVH for everyday driving.
Less Ideal for: Drivers seeking heavy-duty or race-focused mounts or those who require reinforced or polyurethane mounts for tuned, high-horsepower builds should consider purpose-built performance options instead.
- Complete four-piece kit covering front, front-left, rear engine mounts and transmission mount for a full replacement job
- Designed to match factory mounting geometry so installation typically fits without modification
- Natural rubber and metal construction helps absorb engine vibration and reduce cabin noise
- Reportedly straightforward to install for DIYers and delivers noticeable improvement over old stiff mounts
- Not marketed as a performance or heavy-duty motorsport part and may not suit high-power or track-modified vehicles
- Long-term lifespan can vary compared with factory parts depending on driving conditions
Verdict A practical factory-style four-piece mount kit that restores ride comfort and reduces vibration for Ford Escape owners who want a quality replacement without stepping up to race-oriented mounts.
4. Marketplace Auto Parts Rear Engine Mount for Ford Escape
| Position | Rear |
|---|---|
| Compatible Models | 2005-2012 Ford Escape (specified engines/drivetrains) |
| Meets/Exceeds | Factory specifications |
This rear engine mount replaces the factory rear mount on compatible Ford Escape models and is intended to restore proper engine positioning and vibration isolation. It installs in the rear mounting location and is used whenever a worn or failed mount is causing excessive engine movement, vibration in the cabin, or driveline noise. The product is marketed as meeting or exceeding factory specifications and is produced under routine quality control checks, which suggests it will perform like a typical aftermarket replacement. Practical benefits include straightforward installation as a single-part swap and the potential to reduce engine movement and transmission of vibration when fitted correctly. Limitations are that fitment is specific to certain Escape model years and powertrains, so buyers must confirm compatibility with their exact year and drivetrain; also the listing provides minimal detail about materials or expected service life compared with higher-end replacements. For budget-focused repairs this is a functional, no-frills option to get a worn rear mount replaced quickly.
Best for: Budget-conscious owners looking for an affordable, factory-style rear engine mount to fix vibration or engine movement without upgrading to a premium performance part.
Less Ideal for: Drivers seeking long-term or performance-oriented engine mounts for aggressive driving or heavy-duty use should consider higher-end or heavy-duty alternatives.
- Sold as a direct rear mount replacement designed to match factory fit and position
- Stated to meet or exceed factory specifications, indicating consistency with OEM fitment
- Simple single-part swap that addresses engine movement and cabin vibration
- Compatible with a range of 2005–2012 Ford Escape engines and drivetrains listed
- Manufacturer provides limited information about materials and long-term durability
- Fitment is limited to specific Escape years and engine options so verification is required
Verdict A practical, budget-friendly rear engine mount that restores factory-style fit and reduces vibration when matched to the listed Ford Escape years and engines.
5. Yllhaoyuan 3-Piece Engine Motor Mount Set for 2013–2016 Ford Escape 2.0L/2.5L
| Compatible Vehicles | 2013-2016 Ford Escape 2.0L/2.5L |
|---|---|
| Set Contents | Front engine mount, upper transmission mount, rear torque strut mount |
| Manufacturer | Yllhaoyuan |
| Item Weight | 8.82 pounds |
This Yllhaoyuan kit supplies the three front mounts most commonly replaced together on 2013–2016 Ford Escape 2.0L/2.5L cars: the front engine mount, upper transmission mount, and rear torque strut. It is used to stabilize the powertrain, cut down cabin vibration, and reduce engine movement under acceleration and during gear changes. The listing claims direct factory-style fitment and lists matching part numbers so it bolts in without modification on compatible Escapes. Buyers will notice firmer engine positioning and less drivetrain noise after installation, which is useful whether you do the work yourself or have a shop swap them out. Installation can be straightforward for the front mounts but the driver-side and rear torque strut locations may require battery removal, jacking support, and some patience with confined bolts. The kit is a practical, budget-friendly replacement that restores ride refinement, though installer experience matters for the trickier fasteners and alignment steps.
Best for: Risk-averse mainstream buyers who prioritize restoring factory-level refinement and want a complete, vehicle-specific replacement to eliminate vibration without experimenting with partial repairs.
Less Ideal for: People looking for a universal or performance-oriented mount solution or those unwilling to tackle mounts that require battery removal and jacking support during installation.
- Complete three-piece set addresses the primary mounts that cause vibration when worn
- Designed to match factory part numbers for bolt-on installation on specified Escape models
- Stiff construction and reinforced materials aimed at improved vibration damping
- Reduces engine movement and drivetrain stress, improving cabin comfort
- Rear torque strut and some transmission-mount bolts can be difficult to access and install
- Fitment must be verified for exact year and engine variant before purchase
Verdict A practical, three-piece factory-replacement mount kit that restores engine stability and reduces vibration on 2013–2016 Ford Escape 2.0L/2.5L models, best suited to buyers who want a straightforward, vehicle-specific fix.
6. Yllhaoyuan Complete 3-Piece Engine and Transmission Mount Set for Ford Escape (2013–2019)
| Fitment years | 2013-2019 |
|---|---|
| Compatible engines | 1.5L (2017-2019), 1.6L (2013-2016) |
| Pieces included | 3 mounts |
| Replaces part numbers | A5592, A5520, A5612, 3352, 3214, 3238, EM-4190, EM-4057, EM-4121 |
This Yllhaoyuan kit supplies the three mounts most commonly replaced on the Ford Escape: the front engine mount, the rear lower torque strut, and the left transmission mount. It is intended for owners who need to eliminate idle shake, harsh shifts, and drivetrain movement by restoring solid attachment points between the engine, transmission, and chassis. The parts are described as factory-style replacements with reinforced metal brackets and high-density vibration-dampening rubber, which in practice means a noticeable reduction in cabin vibration and improved steering feel after installation. Fitment covers Escape model years 2013–2019 with 1.5L and 1.6L engines and it replaces several common part numbers for a direct swap. Expect typical DIY installation steps like lifting the engine slightly and removing obstructing components; some bolts can be tight and the transmission mount may require extra patience. While reviews indicate good performance for the price, results depend on careful installation and correct vehicle selection.
Best for: Practical optimizers who want the biggest improvement in ride comfort and drivability per dollar by replacing the key mounts that commonly wear on Ford Escape SUVs.
Less Ideal for: Buyers seeking a single-part replacement or those unwilling to perform moderate mechanical work should consider having a technician fit the mounts or sourcing individual factory-quality parts.
- Complete three-piece set covers the front engine mount, torque strut, and left transmission mount for a coordinated repair
- Designed to match factory fit and replace known part numbers for straightforward installation
- Reinforced metal brackets and high-density rubber aim to reduce cabin vibration and harsh shifting
- Good value by replacing multiple mounts at once instead of buying single pieces separately
- May require moderate mechanical skill and specialty hand access for some bolts during installation
- Transmission mount installation can be tight and may need transmission movement or extra tools to align
- Fitment is specific to Escape 2013–2019 1.5L/1.6L models so it is not universal
Verdict A cost-effective, factory-style 3-piece mount kit that restores Escape ride comfort and driveline stability when you need a practical, budget-minded repair.
7. LOONGRIE Engine Motor Mount Set for Ford Escape / Mazda Tribute / Mercury Mariner (Set of 4)
| Unit Count | 4.0 Count |
|---|---|
| Manufacturer | loongrie |
| Model | LG004 |
| Set Name | Set of 4 |
This LOONGRIE set supplies four engine mounts meant to replace worn factory mounts on compatible Ford Escape, Mazda Tribute, and Mercury Mariner models. Installers will use these as direct replacements to restore engine positioning and reduce excessive movement under throttle, typically fitted during routine maintenance or after a failed mount. The listing highlights full-metal brackets with bonded rubber and references multiple OEM part numbers for fitment, which helps match the correct locations when ordering. Buyers report easy bolt-up installation and noticeable reduction in vibration when parts fit correctly. Expect the benefit of restoring drivetrain alignment and smoother idle with a complete set, which is handy if multiple mounts are aged. Some users note variability in material feel across units and a few report the passenger-side mount can transmit more vibration than higher-end aftermarket options, so NVH improvements may vary. The kit comes as a bundled set of four which simplifies sourcing but check vehicle-year compatibility carefully before purchase.
Best for: Balanced buyers who want a practical, full replacement kit that simplifies a multi-mount service and prioritize value and convenience over premium NVH tuning.
Less Ideal for: Drivers seeking a noise- and vibration-optimized, premium mount from an established OEM-level supplier or racers needing reinforced performance mounts should consider higher-end alternatives.
- Sold as a complete four-piece kit so you can replace all worn mounts at once.
- Designed to match multiple factory reference part numbers to simplify correct fitment.
- Many buyers report straightforward bolt-up installation with no modification.
- Restores engine positioning and reduces excessive movement for improved drivability.
- Build feel varies compared with premium brands and some units can transmit more vibration into the cabin.
- Not explicitly marketed as a vibration-tuned or premium NVH solution.
- Compatibility limited to listed Ford Escape/Mazda Tribute/Mercury Mariner years and non-hybrid models only.
Verdict A convenient, full replacement kit that restores engine position and function for the specified Ford Escape family models, offering good value if you prioritize completeness over premium NVH performance.
Choosing the Right Ford Escape Engine Mount: Key Factors to Consider
Fitment and Vehicle Specificity
Correct fitment is critical because an engine mount designed specifically for the Ford Escape will align with factory mounting points and clear surrounding components. A precise fit reduces installation time, avoids stress on bolts or brackets, and helps maintain proper engine alignment. Poor fitment can introduce unwanted load paths that accelerate wear on the mount and adjacent parts.
When a mount matches the vehicle, torque specifications and bushing geometry are more likely to be appropriate, preserving drivetrain angles and minimizing vibration transfer to the chassis.
Material and Bushing Design
Materials and bushing design determine how a mount absorbs and transmits engine forces. Rubber bushings tend to isolate vibration well but can degrade faster under heat and oil exposure, while fluid-filled or hydraulic-style mounts provide better damping across a range of frequencies. Metal or solid mounts offer durability and precise control but may increase NVH, or noise, vibration, and harshness.
Evaluate the operating environment and driving style when choosing a bushing type. Consider materials with proven resistance to heat, oil, and road contaminants to maximize service life.
Durability and Corrosion Resistance
Engine mounts are exposed to road salt, moisture, and fluctuating temperatures, so durability is a practical concern. Corrosion-resistant hardware and coated metal components prolong useful life and reduce the likelihood of seized fasteners during maintenance. Weld quality and metal thickness influence structural integrity, especially where the mount handles high torque loads.
Long-lasting mounts reduce the frequency of replacement and lower downstream wear on connected components, making upfront attention to durability a worthwhile tradeoff.
Vibration and Noise Control
A core function of an engine mount is to control vibration and noise that can be transmitted into the cabin. Mounts with effective damping reduce noticeable vibration during idling, acceleration, and gear changes. The damping profile matters; some mounts prioritize low-frequency isolation while others target higher-frequency engine harmonics.
Select a mount whose damping characteristics align with your priorities, whether that is maximizing comfort for daily driving or maintaining firmer engine control for spirited driving.
Installation Ease and Serviceability
Ease of installation affects both the time and cost to replace a mount. Features like included hardware, clear instructions, and standard fastener sizes simplify installation for home mechanics and pros alike. Consider whether engine support or jack points are needed and whether the design allows straightforward access to bolts.
Serviceable mounts that use reusable hardware or come with replacement components make future maintenance easier and reduce the risk of damage during removal and reinstallation.
Load Capacity and Torque Handling
The mount must handle the engine's static weight and dynamic torque moments produced during acceleration, braking, and turning. A mount with inadequate load capacity can deform or fail, leading to increased movement and stress on adjacent parts. Torque handling is especially important where the mount resists twisting forces.
Choose a mount specified for the engine and drivetrain loads typical of the Ford Escape application to ensure reliable performance under real-world driving conditions.
FAQ
What are common symptoms of a failing Ford Escape engine mount?
Common signs often include increased vibration at idle, clunking or banging during acceleration or shifting, and a noticeable change in engine position under load. You may also notice unusual noises that seem to come from the engine bay when starting or stopping.
Can I replace an engine mount myself on a Ford Escape?
Many owners can replace a mount with basic tools, an engine support or jack, and clear instructions. Complexity depends on the mount location and surrounding components. If access is tight or torque specifications are critical, a professional installation can ensure correct fit and safe fastening.
How long do engine mounts typically last?
Lifespan varies based on driving conditions, exposure to contaminants, and mount design. Mounts often last several years under normal use, but frequent towing, aggressive driving, or exposure to oil and road salt can shorten service life. Regular inspection helps catch deterioration early.
Will a bad engine mount cause other damage?
Excessive engine movement can place extra stress on hoses, wiring, and drivetrain components, which may lead to premature wear or disconnection. Addressing a failing mount promptly reduces secondary damage risk and helps maintain proper engine alignment.
Are aftermarket mounts as reliable as OEM for the Ford Escape?
Aftermarket mounts can offer reliable performance, but quality varies between manufacturers. Look for mounts with clear vehicle-specific fitment, durable materials, and supportive technical information. Avoid components that lack compatibility details or robust construction.
How do I know if a mount needs replacement versus tightening bolts?
If vibration or movement persists after verifying fasteners are torqued correctly, the mount material or internal damping is likely compromised. Visual inspection for cracked rubber, separated components, or fluid leaks in hydraulic mounts helps determine if replacement is necessary.
How We Chose the Best Ford Escape Engine Mount
We prioritized fitment accuracy for the Ford Escape, structural durability of the mount materials, and the ability to reduce engine vibration under typical driving loads. Torque capacity and damping characteristics were included to assess how well a mount resists movement during acceleration, braking, and cornering. Ease of installation and clear compatibility information were considered so that replacement is straightforward for owners or technicians. We also looked for robust mounting points and corrosion-resistant hardware to ensure longer service life. Items were excluded if they lacked clear vehicle-specific fitment information, used unverified materials, or had a history of premature failure in owner reports. We did not include universal mounts that require extensive modification. The final picks balance practical installation, expected noise and vibration reduction, and long-term durability for Ford Escape applications.
Our full evaluation process is outlined in our review methodology.
Conclusion
When choosing an engine mount for a Ford Escape, prioritize correct fitment, appropriate damping characteristics, and durable materials. These factors determine how well the mount controls vibration, resists torque forces, and withstands environmental exposure. Weigh tradeoffs between comfort-focused damping and firmer mounts that offer precise engine control. Also consider installation practicality and corrosion resistance to reduce long-term maintenance needs.
Explore More:
- Check out all Ford Escape parts & accessories
- Explore Engine
- Browse all Auto Parts
