Note: This article contains affiliate links. If you click on these links and make a purchase, I may earn a small commission at no extra cost to you. This helps support my research and content. Read my full affiliate disclaimer here.
If your Chrysler Town & Country is experiencing extra vibration, clunking during shifts, or visible engine movement, choosing the right engine mount matters for comfort and drivetrain longevity. The mounts you pick affect how the powertrain transmits forces to the chassis, how well the vehicle isolates road and engine vibration, and how long related components last. This guide presents a shortlist of the top seven engine mounts for the Chrysler Town & Country. Each pick was chosen for real-world durability and accurate fitment. Below we outline the criteria used to evaluate these mounts and what to watch for when making a selection.
Looking for other parts? See all Chrysler Town & Country parts & accessories.
Top Picks at a Glance
1. XINEAT Engine and Transmission Mount Set (4 pcs) for 2008–2010 Chrysler Town & Country / Dodge Grand Caravan
| Compatible Vehicles | 2008–2010 Chrysler Town & Country, 2008–2010 Dodge Grand Caravan V6 |
|---|---|
| Included Components | Front motor mount, front-right hydraulic motor mount, rear transmission mount, transmission mount |
| Material Type | Aluminum |
| Mounting Type | RM |
This XINEAT four-piece mount kit replaces the engine and transmission mounts on 2008–2010 Chrysler Town & Country and Dodge Grand Caravan V6 models to restore factory-style support and reduce vibration. The set includes front, front-right hydraulic, rear transmission, and transmission mounts packaged to match original bolt patterns for straightforward installation by a professional or experienced DIYer. Buyers report snug fitment, clean manufacturing, and rubber components that damp engine movement effectively, which translates to reduced idle and acceleration vibration and more stable powertrain feel. The aluminum components have a protective coating to resist corrosion and the hydraulic front-right mount helps control movement under load. Limitations are typical for aftermarket parts: long-term durability versus OEM can vary by driving conditions, and professional installation is recommended to ensure correct torque and alignment. For reliability-focused owners the kit offers a cost-effective route to restoring factory ride quality without extensive modification.
Best for: Buyers who prioritize reliable restoration of factory ride and vibration control for a Chrysler Town & Country or Grand Caravan and prefer a value-minded replacement that mirrors OEM fit and function.
Less Ideal for: Owners seeking lifetime performance guarantees or heavy-duty upgrades for extreme towing or racing should consider heavy-duty or specialized mounts instead.
- Complete four-piece kit matched to original bolt patterns for direct replacement
- Hydraulic front-right mount reduces engine movement under load
- Aluminum components with protective coating for corrosion resistance
- Multiple user reports of good fitment and reduced vibration after installation
- Long-term durability may vary compared with factory-brand parts depending on use
- Professional installation is advised to ensure correct alignment and torque
Verdict A practical, reliability-focused four-piece replacement kit that restores factory-style support and reduces vibration for 2008–2010 Town & Country and Grand Caravan V6 models.
2. AA Ignition Engine and Transmission Mount Kit (Set of 4)
| Compatible Engines | 3.3L, 3.8L, 4.0L |
|---|---|
| Fitment | Chrysler Town & Country, Dodge Grand Caravan, Routan (2008–2010 ranges indicated) |
| Set Contents | Front, Front Right, Rear, Transmission mount |
This AA Ignition kit replaces the engine and transmission mounts on Chrysler Town & Country, Dodge Grand Caravan, and Routan vehicles with 3.3L, 3.8L, or 4.0L engines to stop engine movement, reduce noise, and restore drivetrain alignment. The set includes the front, front-right, rear, and transmission mounts so you can replace all critical mounting points at once rather than piecing parts together. Buyers report the mounts cut vibration and clunks during acceleration, braking, and turns, and many installations are straightforward with basic hand tools and a jack. The mounts are aftermarket but marketed as direct factory-style replacements that fit the original mounting locations. Expect practical benefits like quieter operation and improved feel after installation, but be prepared for some fitment variation on older or modified cars and occasional extra effort aligning brackets or fasteners during install. For owners who prefer a full kit and convenience over sourcing individual pieces, this offers an efficient single-purchase solution.
Best for: Convenience-driven buyers who want a single, ready-to-install kit to quickly eliminate engine vibration and avoid sourcing multiple parts.
Less Ideal for: Shoppers seeking guaranteed perfect factory-fit for heavily modified or high-mileage vehicles should consider checking fitment with a trusted parts supplier or choosing a dealer-sourced replacement.
- Complete set replaces front, front-right, rear, and transmission mounts so you can do the job in one visit.
- Marketed as direct fit replacements for the specified Town & Country, Grand Caravan, and Routan models to simplify selection.
- Notable reduction in engine vibration and noise reported by multiple users after installation.
- Relatively simple installation for most mounts using common garage tools and a floor jack.
- Aftermarket fit can require extra alignment or minor modifications on some vehicles.
- One or two mounts may be more difficult to access or install, increasing labor time for do-it-yourselfers.
Verdict A convenient full-kit replacement that restores quieter operation and drivetrain stability for Town & Country and Grand Caravan owners, with occasional fitment fiddling possible.
3. ENA Engine and Transmission Mount Set for Chrysler/Town & Country/Grand Caravan/Voyager (3.3L & 3.8L)
| Vehicle Fitment | Chrysler Town & Country, Grand Caravan, Voyager 2001–2007 (3.3L & 3.8L) |
|---|---|
| Mounting Locations | Front Left, Front Right, Center, Rear Left |
| Material Type | Rubber |
| Set Name | Engine Mount Set |
This ENA mount kit replaces the two front engine mounts plus center and rear transmission mounts to restore engine stability and reduce vibration in 2001–2007 Chrysler Town & Country, Grand Caravan and Voyager vans with 3.3L or 3.8L engines. Supplied as a set of four rubber mounts, it is intended for straightforward bolt-in replacement and is typically used when worn mounts cause noise, harsh vibration, or rough shifting. Buyers report the parts fit like factory replacements, lower engine/transmission movement, and noticeably quieter operation after installation. Because the mounts are molded rubber they absorb vibration well and are a low-cost way to bring back factory-like NVH and shifting behavior. Some users have found occasional molding or fitment defects, so careful inspection before installation is wise. Professional installation is recommended if you lack tools or access to a lift since replacing multiple mounts can be time consuming and requires aligning components for proper bolt-up.
Best for: Performance-oriented buyers who want to restore factory-level stability and NVH control in a Chrysler Town & Country/Grand Caravan/Voyager and prioritize driving feel and drivetrain smoothness.
Less Ideal for: Shoppers seeking premium hydraulic mounts or extreme-duty performance upgrades should consider higher-end or specialty options instead.
- Complete four-piece kit covers both engine mounts and two transmission mounts for a full replacement job
- Rubber construction effectively reduces engine and transmission vibration and noise
- Reported to fit Chrysler Town & Country, Grand Caravan and Voyager models with 3.3L/3.8L engines without modification
- Lower cost than buying individual mounts from parts stores while delivering factory-style function
- Made from molded rubber so longevity can vary compared with higher-end hydraulic mounts
- Some customers reported occasional molding or fitment defects that prevented bolt-up
- Replacing all mounts can be labor intensive and may require professional alignment to avoid installation issues
Verdict A cost-effective four-piece rubber mount kit that restores engine stability and reduces vibration for 2001–2007 Chrysler minivans, but inspect parts closely and plan for proper installation.
4. A-Premium Front Side Engine Motor Mount for Chrysler Town & Country/Dodge Grand Caravan (3.6L)
| Vehicle fitment | Chrysler Town & Country 2011-2016 (3.6L) |
|---|---|
| Location | Front Side |
| Material Type | Alloy Steel, Rubber |
| Mounting Type | Corner Mount |
| Mounting Hole Quantity | 3 |
This A-Premium front side engine motor mount replaces the factory unit on 3.6L V6 Town & Country and compatible Dodge/Routan/Ram C/V models to stabilize the engine and soak up vibration. It installs in the front-side position and uses a steel-and-rubber construction with three mounting holes, so it functions like a direct replacement for a worn bracket. In typical use it keeps engine movement under control, reduces driveline shudder at idle and helps quiet cabin noise. Buyers report straightforward fitment and a denser rubber compound than some economy alternatives, which suggests a longer service life. Because it is a single-piece mount sold individually, expect to replace only the failed location rather than a multi-mount set. The product carries a one-year unlimited-mileage guarantee limited to the part cost, and some installations may require minor trimming at the crossmember if corrosion or factory deformation exists. This is a practical, budget-focused replacement that balances fit and durability for routine repairs on the specified models.
Best for: Budget-conscious owners seeking a cost-effective, factory-style replacement mount to restore normal engine behavior without overspending on premium aftermarket options.
Less Ideal for: Drivers looking for an uprated or performance-oriented mount for aggressive driving or heavy towing should consider performance mounts instead.
- Designed for direct fit on 3.6L Town & Country and related models, simplifying replacement.
- Steel and rubber construction with three mounting holes for stable engine support.
- Denser rubber compound compared with some economy brands, improving vibration damping.
- Single-piece unit sold individually lets you replace only the failed mount.
- Includes a one-year unlimited-mileage part guarantee covering the cost of the part.
- Sold as one piece only so other mounts may still need replacement for complete engine stabilization.
- Guarantee covers the part cost only and does not include labor or related repair expenses.
Verdict A practical, budget-friendly front engine mount that restores factory-like vibration control on 3.6L Town & Country models with mostly straightforward fitment.
5. Dilomber Engine and Transmission Mount Kit (4‑Piece) for Chrysler Town & Country / Dodge Caravan / Volkswagen Routan (2008–2010)
| Compatible Vehicles | 2008–2010 Town & Country, Grand Caravan/Caravan, Routan with 3.3L/3.8L/4.0L engines |
|---|---|
| Set Components | Engine mounts (front, rear) and transmission mount, 4 pieces |
| Manufacturer | Dilomber |
| Included Part Numbers | A5654 A5480 A5465 A5493 |
This four-piece Dilomber mount kit replaces the front, rear and transmission mounts on compatible 2008–2010 Town & Country, Grand Caravan/Caravan and Routan models to reduce engine and transmission vibration and hold driveline components securely in place. Installation is the typical vehicle-level repair: remove the old mounts, position the new pieces and torque the fasteners to factory specifications. The listing calls out direct-fit replacement part numbers for a close match to factory geometry and several customer reports show straightforward fit and simple swap times. Benefits include quieter cabin feel, reduced drivetrain movement and a full set so you can address worn mounts at once. Expect some variance in fit quality on a small number of units, so verify bolt locations and alignment before final torqueing. This kit targets cost-conscious replacements that aim for factory-like function rather than upgraded performance or heavy-duty durability.
Best for: A risk-averse mainstream buyer looking for an affordable, factory-style replacement kit to restore quiet operation and normal drivability on an older Town & Country or Caravan.
Less Ideal for: Drivers seeking heavy-duty mounts for towing, aggressive driving, or performance improvements should consider reinforced aftermarket options instead.
- Full 4-piece set covers front, rear and transmission mounts so all worn points can be replaced at once
- Sold as direct-replacement part numbers for easier fitment checks against factory references
- Designed to reduce engine and transmission noise and vibration for a smoother cabin experience
- Multiple customer reports of quick installation and good fit for many vehicles
- Some buyers reported one piece with poor fit requiring adjustment or replacement
- Not marketed as a heavy-duty or performance upgrade compared with factory-plus aftermarket mounts
Verdict A practical, complete factory-style mount kit for restoring quiet, stable operation on 2008–2010 Chrysler Town & Country and similar vans, but inspect fitment carefully before final installation.
6. Yllhaoyuan Complete Engine Motor Mount Set of 4 for 2011–2017 Dodge Grand Caravan 3.6L
| Compatible Vehicles | 2011-2017 Grand Caravan 3.6L; Chrysler Town & Country 2011-2015; Ram C/V 2012-2015; VW Routan 2011-2014 |
|---|---|
| Set Contents | Front motor mount, front right hydraulic motor mount, rear motor mount, transmission mount |
| Brand | Yllhaoyuan |
| Manufacturer Part Number | YYAA03 |
This Yllhaoyuan kit supplies all four engine and transmission mounts needed when replacing worn mounts on 3.6L Chrysler/Dodge minivans. The set includes front, front-right (hydraulic), rear, and transmission mounts so you can restore the van's factory mounting system in one job. In use it reduces engine vibration and drivetrain movement, which reviewers report cuts cabin rattles and smooths low-speed ride harshness. The listing states the parts are engineered to meet factory-quality standards and cross-references common OEM part numbers for straightforward fitment. Installation is a typical garage job for someone with basic tools though a jack to support the engine and some patience removing tight bolts is required; some buyers had to slightly enlarge bolt holes or source a replacement bolt during install. If you want a complete replacement that addresses vibration without paying dealer prices, this kit offers strong value, but expect to spend time on fitment details during installation.
Best for: Buyers who prioritize practical, cost-effective repairs and want a full factory-style replacement kit to quietly restore drivetrain stability on a Chrysler Town & Country or Grand Caravan.
Less Ideal for: Owners who prefer hassle-free, guaranteed bolt‑perfect plug-and-play parts or who lack tools and experience should consider professional installation or an alternative with confirmed identical-fit fasteners.
- Complete four-piece kit covers front, front-right (hydraulic), rear, and transmission mounts for a single repair
- Cross-references common OEM part numbers for easier verification of fitment
- Engineered to factory-quality standards to reduce vibration and restore smoothness
- Many users report clear reduction in engine movement and cabin rattles after installation
- Occasional minor fitment issues reported such as needing to enlarge torque mount holes or replace a bolt
- Installation can be time-consuming and may require jacks and some mechanical experience
Verdict A full, budget-friendly mount kit that restores engine stability and reduces vibration but may require some hands-on fitting during installation.
7. Dngbymx Engine Motor Mount Set for Chrysler Town & Country 3.6L (2011–2016)
| Finish Type | Powder Coated |
|---|---|
| Unit Count | 5.0 Count |
| Manufacturer | Dngbymx Auto Parts |
| Compatible Engines | 3.6L (listed vehicle fitment) |
This Dngbymx engine motor mount kit supplies the four drivetrain mounts needed to replace worn mounts on Chrysler Town & Country 3.6L models. The kit includes front, front-right, rear engine mounts and a transmission mount so you can refresh all major mounting points in one job. Parts are cast iron and aluminum with rubber isolators and arrive powder coated, which helps resist corrosion while restoring engine stability and reducing vibration and harshness through idle, acceleration and gear changes. Fitment is vehicle-specific and many buyers report straightforward bolt-on installation with factory-style mounting points, so it is typically used as a direct replacement during routine repairs or when diagnosing excessive engine movement. Limitations to expect are the occasional early failure reported by some users and the fact this is an aftermarket kit rather than a branded factory part, so long-term durability can vary by driving conditions and installation quality. For those replacing multiple mounts at once this kit saves time versus buying pieces individually and brings the drivetrain back to near-factory behavior when the parts perform as intended.
Best for: A balanced all-round buyer who wants a single, ready-made replacement kit to restore engine stability and reduce vibration without sourcing parts separately.
Less Ideal for: Drivers seeking guaranteed long-term, heavy-duty performance or commercial-use longevity should consider higher-end or OEM-sourced mounts and professional inspection before purchase.
- Complete five-piece kit covers front, front-right, rear engine mounts and transmission mount for a single repair event
- Powder coated metal components resist corrosion and present a factory-style appearance
- Designed for direct fit to Chrysler Town & Country 3.6L so installation is typically bolt-on with no modification
- Includes common replacement part numbers for easy cross-referencing during installation
- Some buyers report premature rubber damage on a small number of units indicating variable long-term durability
- Aftermarket supplier rather than factory-branded part so material quality and consistency can vary
Verdict A convenient, vehicle-specific five-piece mount kit that restores engine stability affordably but may show variable longevity compared with higher-end or OEM options.
Choosing the Right Chrysler Town & Country Engine Mount: Key Factors to Consider
Fitment and Compatibility
Exact fitment to the Chrysler Town & Country is essential because engine mounts must align with factory mounting points and torque specifications. A mount that does not match the vehicle’s mounting pattern can cause improper load distribution, accelerated wear, and abnormal vibration.
Check that the mount is specified for the Town & Country model year you own and that it lists exact mounting locations. Proper fitment reduces installation time and limits the risk of needing modification or additional brackets.
Material and Durability
Mount materials determine how well the part resists oil, road salt, and heat from the engine bay. Common designs combine metal brackets with rubber or hydraulic inserts. Higher-quality elastomers hold up better against heat and oil exposure, while robust metal components resist corrosion and cracking.
Durability affects long-term isolation performance. Inferior materials can crack or delaminate, leading to loss of vibration damping and premature replacement. Consider mounts made from proven elastomers and plated or stainless metals for longevity.
Vibration Isolation and Comfort
The mount’s ability to dampen engine vibration directly affects cabin comfort and perceived refinement. Stiffer mounts transfer more vibration but can improve engine control under heavy loads. Softer mounts reduce transmitted vibration but may allow more engine movement during acceleration and deceleration.
Choose a balance that suits your driving: if you prioritize a quiet ride, select mounts designed with enhanced damping. If you need firmer control for towing or heavy use, a higher-rate mount may be appropriate.
Load Capacity and Design
Each mount must handle the static and dynamic loads produced by the engine and transmission. Design aspects like load rating, insertion geometry, and reinforcement ribs influence how the mount distributes stress.
Undersized or poorly designed mounts can tilt or deform under load, causing stress on adjacent components such as exhaust or driveline parts. Confirm that the mount’s design matches the Town & Country’s engine and transmission configuration to avoid load-related failures.
Installation Hardware and Instructions
Mount replacement is often performed during routine repairs, so included hardware and clear instructions speed installation and reduce errors. Kits that include bolts, washers, and alignment guidance help maintain correct torque values and positioning.
Lack of proper hardware can force reusing old fasteners that may be stretched or corroded. Detailed instructions or torque specifications also help ensure the mount is tightened to safe values, reducing the chance of misalignment or fastener failure.
Maintenance and Serviceability
Consider how easy it is to inspect and replace the mount in the future. Some mounts are straightforward to access, while others require removing ancillary components. Ease of service affects labor time and overall ownership cost.
Select mounts that do not require excessive disassembly for routine checks and that provide clear replacement intervals in technical guidance. Components that are serviceable and easy to reach lower long-term maintenance disruption.
FAQ
What are common signs that a Chrysler Town & Country engine mount is failing?
You will often notice increased vibration in the cabin, especially at idle, and clunking or banging during acceleration or gear changes. Visual signs include cracked or separated rubber and excessive engine movement when the vehicle is revved. These symptoms usually prompt inspection and, if confirmed, replacement.
Can I do an engine mount replacement myself?
Many people can replace an engine mount with basic mechanical skills and the right tools, but some mounts require engine support and careful alignment. Preparation includes securing the engine with a jack or support and following torque specifications. If you are unsure about safely supporting the engine or torque values, seek a qualified technician.
How long do engine mounts typically last on the Town & Country?
Mount lifespan varies with driving conditions, exposure to oil and heat, and load cycles. Under normal driving, mounts often last many years but may wear sooner with frequent towing, rough roads, or oil leaks that degrade the rubber. Inspect mounts during major services to spot wear before it affects other components.
Will replacing an engine mount fix vibration issues?
If vibration is caused by a deteriorated mount, replacing it typically reduces or eliminates that source of vibration. However, vibration can also come from other sources such as driveline imbalance, worn suspension parts, or misfires. It is advisable to confirm the mount is the root cause before replacement.
Are there tradeoffs between firmer mounts and softer mounts?
Yes. Firmer mounts provide better control of engine movement under load and can improve responsiveness, but they tend to transmit more vibration into the cabin. Softer mounts improve ride comfort by absorbing vibration but may allow more engine movement, which can stress adjacent components. Choose based on your priorities for comfort versus control.
How We Chose the Best Chrysler Town & Country Engine Mount
We focused on factors that directly influence long-term performance and proper function on the Chrysler Town & Country. Primary evaluation criteria included fitment accuracy to the specific model and model years, material quality and resistance to oil and heat, vibration isolation characteristics, and load capacity for the vehicle's engine and transmission mounting points. We also considered mounting hardware completeness and the clarity of installation instructions. We excluded options with vague fitment information, non-durable materials, or missing essential hardware. We did not include speculative or unverified performance claims. The result is a list that prioritizes correct application, robust materials, and predictable vibration control for typical driving conditions.
Our full evaluation process is outlined in our review methodology.
Conclusion
When selecting an engine mount for your Chrysler Town & Country, prioritize correct fitment, durable materials, and the damping characteristics that match your driving needs. Proper alignment and the right load capacity reduce the risk of secondary damage to nearby components. Balance comfort against control by choosing a mount that offers the vibration isolation or firmness you need, and consider ease of installation and included hardware to minimize labor and future service disruption.
Explore More:
- Check out all Chrysler Town & Country parts & accessories
- Explore Engine
- Browse all Auto Parts
