Note: This article contains affiliate links. If you click on these links and make a purchase, I may earn a small commission at no extra cost to you. This helps support my research and content. Read my full affiliate disclosure here.
If you drive a BMW 7 Series, a worn or failed engine mount can cause noticeable vibration, clunks, and accelerated wear on other components. Choosing the right engine mount matters because fitment, material construction, and durability determine how effectively the mount isolates vibration and keeps drivetrain loads aligned.This guide highlights six shortlisted options that represent reliable design and fit for the BMW 7 Series. We evaluated each on durability, fitment accuracy, and noise and vibration control to help you find a suitable replacement. Read on for a clear overview before you inspect specific product listings.
Looking for other parts? See all BMW 7 Series parts & accessories.
Top Picks at a Glance
| Best overall The best all-around choice for most situations | TRQ 2-Piece Front Engine Mount Set for BMW 5/7 Series (Driver & Passenger) |  |
| Best Quality Built to a higher standard if you want something more solid | Engine Motor Mount Bracket Support Bearing for BMW 7 Series (E65/E66/E67) |  |
| Best Value The sweet spot between price and what you get | Bomunik 4-Piece Engine and Transmission Mount Kit for Select BMW 5/6/7 Series |  |
| Best budget The cheapest option that still gets the job done reliably | Rockplanet Engine and Transmission Mount Kit (4-Piece) Compatible with BMW |  |
| Highest Rated A top-rated pick with lots of positive feedback | maXpeedingrods Hydraulic Front Left & Right Engine Mount Kit for BMW 7 Series 730Li (2016–2019) |  |
| Best Seller A high-volume bestseller chosen again and again | Bopowo 3‑Piece Engine and Transmission Mount Set for BMW 7 Series (fits select 2011–2016 3.0L L6 models) |  |
1. TRQ 2-Piece Front Engine Mount Set for BMW 5/7 Series (Driver & Passenger)
| Brand Name | TRQ |
|---|---|
| Set Name | 2 Piece Engine Mount Set |
| Included Components | Front Driver and Front Passenger Engine Mounts |
| Material Type | Rubber, Metal |
This TRQ two-piece kit supplies the front driver and passenger engine mounts as direct replacements for specific BMW 540i, 740i, 740iL and 750iL model years. It is designed for DIY installation and comes preassembled to align with factory mounting points, which helps the new parts drop in without modifications in most cases. Typical use is swapping worn rubber mounts to reduce idle vibration, harshness under acceleration, and drivetrain movement; many installers report noticeably smoother idle and crisper shifts after installation. The kit is backed by TRQ's DIY videos and includes the two mounts needed for the front of the car, saving a trip to the parts counter. Limitations to consider are mixed long-term durability reports across different vehicles and occasional fitment quirks that may require retaining old hardware or sourcing a small bolt; buyers should verify fitment for their exact year and be prepared with metric deep sockets and basic engine support tools for safe installation.
Best for: Balanced, practical buyers who want a factory-style replacement that restores ride smoothness without paying dealer prices and are comfortable doing or supervising a DIY repair.
Less Ideal for: If you prioritize the absolute longest-lasting, premium OE-matching components or need parts guaranteed for heavy-track use, consider higher-end or OEM replacements instead.
- Direct-fit design for specified BMW 540i and 7 Series model years to simplify installation
- Preassembled mounts reduce prep work and align with factory mounting points
- Comes as a matched two-piece kit covering both front driver and passenger sides
- Extensive DIY video resources from the manufacturer to guide installation
- Some users report variable long-term durability on different vehicles
- May require reusing old fasteners or sourcing a small bolt in rare fitment cases
Verdict: A practical, budget-conscious direct-fit front engine mount kit for BMW 5/7 Series that restores ride smoothness for owners comfortable with DIY installation but with mixed long-term durability reports.
2. Engine Motor Mount Bracket Support Bearing for BMW 7 Series (E65/E66/E67)
| Compatible models | BMW 7 Series E65 E66 E67 (2001–2009) |
|---|---|
| Installation position | Left: 22116769185 / Right: 22116769186 |
| Package quantity | 1 |
This engine motor mount bracket is a direct-fit replacement for BMW 7 Series (E65/E66/E67) models and is intended to hold the engine and transmission firmly to the chassis while absorbing vibration. It installs at the left or right mount positions listed for 7 Series model years 2001 through 2009 and uses a structural design aimed at reducing resonance and the buzzing noise that can come from worn mounts. In use it stabilizes the powertrain during acceleration and braking, helping prevent component shift and improving perceived solidity of the vehicle. The part is sold singly and is compact and lightweight for straightforward handling during replacement. Limitations include minimal manufacturer information and aftermarket branding rather than a factory identifier, so buyers who want an exact factory-sourced part or documented testing may prefer a dealer or OEM remanufactured option.
Best for: Performance-oriented BMW 7 Series owners seeking a firm, vibration-reducing replacement that restores drivetrain stability and reduces noise during spirited driving.
Less Ideal for: Buyers who require an exact factory-sourced part, documented test certification, or a full set replacement service package should consider dealer options or OEM remanufactured mounts instead.
- Made to fit BMW 7 Series E65/E66/E67 model mount positions specified in the listing
- Designed to reduce engine-to-body resonance and eliminate buzzing noise from worn mounts
- Helps stabilize the engine and transmission during acceleration and braking
- Compact single-piece unit that is easy to handle during installation
- Aftermarket brand with limited manufacturer and testing information provided
- Sold as an individual unit so both sides may need separate purchase if multiple mounts are worn
Verdict: A direct-fit aftermarket mount that tightens engine hold and cuts resonance for a firmer, quieter BMW 7 Series driving feel.
3. Bomunik 4-Piece Engine and Transmission Mount Kit for Select BMW 5/6/7 Series
| Brand Name | Bomunik |
|---|---|
| Set Name | 4-Piece Set |
| Material Type | Metal |
| Included Components | 22116786528,22116777365,22326775916 |
This Bomunik 4-piece mount kit supplies left and right engine mounts and two transmission mounts intended as direct replacement parts for select BMW applications in the 5, 6, and 7 Series. It is typically used when worn or failed mounts are causing excessive vibration, engine movement, or drivetrain misalignment; the kit replaces matching mounting points to restore quieter operation and stable engine positioning. The listing emphasizes fitment checks and includes reference part numbers so you can confirm the shapes and attachment points before installation. Practical benefits are straightforward: a complete set for the front engine/transmission locations reduces the need to source individual pieces, and metal construction with a brushed finish gives a factory-replacement look. Important limitations are that fitment is specific and not universal, professional installation is recommended, and some buyers have reported mixed longevity which suggests quality control can vary. Inspect each mount against your old parts and follow the vehicle service procedure during installation.
Best for: Buyers focused on practical, cost-effective repairs who want a single kit to replace multiple worn mounts and prefer confirming fitment by reference numbers before purchase.
Less Ideal for: Drivers seeking guaranteed OEM-level longevity or universal-fit solutions should consider factory-quality parts or dealer replacements instead.
- Complete four-piece set covers left and right engine mounts plus two transmission mounts so you get all primary mounting locations in one purchase
- Metal construction provides a sturdy, factory-replacement appearance and durability for typical road use
- Includes manufacturer reference part numbers to help confirm fitment before ordering
- Fitment is specific to select BMW applications so it will not fit unrelated vehicles
- Reported variability in long-term durability across some buyer reports
Verdict: A single, practical kit that replaces the main engine and transmission mounts for select BMWs so you can restore stability without buying parts individually.
4. Rockplanet Engine and Transmission Mount Kit (4-Piece) Compatible with BMW
| Included components | 4.0 Count |
|---|---|
| Material Type | Alloy Steel, Aluminum |
| Mounting Type | Vehicle Mount |
| Manufacturer | Kepler |
This Rockplanet kit supplies two front engine mounts and two rear transmission mounts as a single replacement package for compatible BMWs. It is intended for owners tackling worn mounts that cause clunks, vibration, and excessive engine movement. The kit uses alloy steel and aluminum components with a corrosion-resistant coating and powder-coated finish, so the parts look robust and resist surface rust during normal use. Buyers report the mounts fit like factory replacements in many cases and eliminate the common noises caused by degraded mounts. Installation can be time-consuming and may require alignment effort and basic mechanical skill, and one or two reviews note inconsistent weld and bushing alignment on individual pieces. For the price this kit is an economical way to replace multiple mounts at once, but expect to spend time on fitment checks and careful installation rather than a plug-and-play dealer experience.
Best for: Budget-conscious BMW owners who need an affordable, full replacement of engine and transmission mounts and are comfortable checking fitment and doing hands-on installation.
Less Ideal for: Buyers seeking guaranteed factory-exact fit or those who prefer dealer-installed, warranty-backed components should consider OEM or professional-sourced alternatives.
- Includes a full set of four mounts so multiple worn units can be replaced in one job
- Alloy steel and aluminum construction with anti-corrosion coating improves durability versus untreated parts
- Powder-coated finish provides added surface protection and a factory-like appearance
- Many buyers report solid fit and elimination of clunks and vibration after installation
- Some reported quality variability in welds and bushing alignment that can complicate installation
- Installation requires mechanical skill and vehicle-specific alignment; not a quick bolt-on for inexperienced DIYers
Verdict: A cost-effective four-piece mount kit that can cure mount-related noise and vibration for BMWs if you accept potential quality variation and a hands-on installation.
5. maXpeedingrods Hydraulic Front Left & Right Engine Mount Kit for BMW 7 Series 730Li (2016–2019)
| Fitment | BMW 7 Series 730Li 2016-2019 (specified trims) |
|---|---|
| Mount Type | Hydraulic |
| Number in Pack | 2 PCS |
| Material | Aluminum, Iron, Rubber |
This maXpeedingrods kit supplies two hydraulic front engine mounts intended as direct replacements for BMW 7 Series 730Li (2016–2019) and several related BMW models. The mounts combine aluminum, iron, and rubber with hydraulic internals to damp vibration, lower engine noise, and help restore correct engine positioning. Installation is typical for front mounts and may take some time if you replace multiple mounts at once, but users report a straightforward fit when the part numbers match. The hydraulic design provides noticeably improved comfort over worn mounts and can improve handling stability by keeping the engine better located under load. Some buyers have reported fitment or hardware problems on non-matching cars, so confirming the listed part numbers and vehicle trim is important before ordering. The kit is sold new and meant to be a factory-style replacement rather than a performance stiffening upgrade.
Best for: Reliability-focused BMW owners who prioritize restoring factory comfort and reducing vibration after worn mounts, and who prefer a like-for-like replacement backed by a vendor with technical support.
Less Ideal for: Drivers seeking performance or track-oriented engine mounts that increase stiffness and engine feedback should consider aftermarket performance options instead.
- Hydraulic construction reduces engine vibration and noise compared with worn mounts.
- Direct-replacement fitment for covered BMW 7 Series 730Li 2016–2019 trims when part numbers match.
- Combination of aluminum, iron, and rubber aimed at balancing durability and damping.
- Includes both left and right front mounts so both sides can be replaced together.
- Some customers reported fitment or hardware quality issues on incompatible vehicles, so verification of part numbers is required.
- Not a performance-oriented or stiffer mount option for drivers seeking more engine control under aggressive driving.
Verdict: A direct-replacement hydraulic front mount kit that restores ride comfort and reduces vibration for the BMW 7 Series 730Li (2016–2019).
6. Bopowo 3‑Piece Engine and Transmission Mount Set for BMW 7 Series (fits select 2011–2016 3.0L L6 models)
| Set Name | 3Pcs Engine Motor Mount Transmission Mount Set |
|---|---|
| Material Type | Alloy Steel |
| Unit Count | 3.0 Count |
| Compatible Engines | L6 3.0L (automatic transmission, RWD listed) |
This 3‑piece mount set replaces the front left, front right, and rear transmission mounts on compatible BMW 3.0L inline‑6 models and is sold as a direct-fit aftermarket alternative to factory parts. Installation is typical of engine mount replacements: remove the old mounts, support the engine, and bolt the new mounts into the factory locations. The set is made from alloy steel and the listing references rigorous testing and matching OEM reference numbers, which suggests a focus on fit and basic durability. Practical benefits include receiving all three critical mounts in one package to restore engine stability and reduce vibration and movement under acceleration and braking. Reported issues in reviews include occasional fitment mismatches and variability in material longevity, so confirming vehicle compatibility before ordering is important and some users tapped bolt holes during installation. The set is a cost-effective route for owners wanting to replace worn mounts without buying dealer parts but may show mixed long‑term durability versus higher-end replacements.
Best for: Risk-averse mainstream buyers who want a full, budget-friendly replacement set to restore factory-like engine stability on compatible BMW 3.0L inline‑6 7 Series models without sourcing individual parts.
Less Ideal for: Owners seeking upgraded performance or heavy-duty mounts for track use or high‑power applications should consider performance-oriented alternatives.
- Complete three-piece kit covers both front motor mounts and the rear transmission mount
- Constructed from alloy steel and marketed to match OEM reference numbers for direct-fit installation
- Saves time and cost by providing all required mounts in one purchase
- Some buyers reported fitment problems on vehicles listed in the compatibility table
- Mixed feedback on durability with reports of mounts failing sooner than expected
Verdict: Provides a cost-effective, full three-piece replacement to restore engine and transmission support on compatible BMW 3.0L inline‑6 7 Series models.
Choosing the Right BMW 7 Series Engine Mount: Key Factors to Consider
Fitment and Vehicle Specificity
Exact fitment to the BMW 7 Series is essential because engine mounts carry heavy loads and must align precisely with factory fastening points. A mount that is a close but not exact match can cause misalignment, stress other components, or complicate installation.
Check for mounts that reference BMW 7 Series chassis codes or OEM mounting points, and confirm included hardware and bolt patterns. Proper fitment reduces installation time and minimizes the chance of additional adjustments or custom modifications.
Material and Construction
Mounts are typically made from rubber, hydraulic components, or polyurethane, often combined with metal brackets. Material choice affects vibration damping, durability, and how the mount responds to oil and heat exposure.
Rubber and hydraulic mounts provide good NVH isolation for everyday driving, while stiffer materials can transmit more feel but offer longer life in some conditions. Consider the engine bay environment and whether exposure to fluids or high temperatures requires specific material resistance.
Noise and Vibration Control
One of the primary functions of an engine mount is to reduce noise and vibration transmitted to the cabin. Different designs target distinct frequency ranges, and proper damping improves ride comfort and perceived vehicle quality.
Evaluate how a mount addresses both idle and load conditions. Look for mounts with documented NVH performance or designs aimed at minimizing resonance. Keep in mind that firmer mounts can improve handling feel while increasing transmitted vibration.
Durability and Environmental Resistance
Engine mounts must withstand repeated engine movement, exposure to heat, and contact with oil and road contaminants. Durability affects how long a replacement will perform before showing signs of wear such as cracking or loss of damping.
Seek mounts with reinforced components, corrosion-resistant brackets, and materials rated for automotive temperatures and chemical exposure. Longevity reduces the frequency of replacement and the risk of secondary damage to the drivetrain.
Installation and Alignment
Ease of installation matters if you plan to replace the mount yourself or want a straightforward job for a technician. Features that help include included mounting hardware, clear orientation markings, and designs that maintain factory alignment without additional shims.
Consider whether the mount requires engine supports, special tools, or torque specifications beyond basic workshop equipment. Proper alignment during installation ensures even load distribution and prevents premature failure.
Load Capacity and Torque Ratings
The mount must handle the engine's weight and torque reactions, especially during acceleration and gear changes. Load capacity and specified torque ratings indicate how effectively a mount will control engine movement under dynamic conditions.
Choose a mount with documented capacity appropriate for the BMW 7 Series powertrain. Undersized mounts can deform or fail, while overbuilt mounts may increase transmitted vibration without delivering additional practical benefit.
How We Chose the Best BMW 7 Series Engine Mount
To build this shortlist we focused on criteria that matter most for BMW 7 Series engine mounts. Primary filters included exact fitment to BMW 7 Series engine and chassis points, material and construction quality such as reinforced rubber or hydraulic designs, and manufacturer-specified torque capacity where applicable. Durability under road loads and resistance to oil and heat were evaluated because these directly affect service life. Noise, vibration, and harshness (NVH) control was another key factor since mounts are meant to isolate engine motion. Finally, we considered installation compatibility including mounting hardware and alignment tolerance.We excluded items that lacked clear vehicle-specific fitment data or that did not provide material and torque specs. We also filtered out mounts intended only for racing or non-street use, and any listing without adequate durability or NVH information. The result is a focused set of six options that meet core fitment and performance expectations for the BMW 7 Series.
Our full evaluation process is outlined in our review methodology.
FAQ
What are common symptoms of a failing engine mount?
Common signs often include increased vibration at idle or under acceleration, clunking or banging noises when shifting or starting, and a feeling of engine movement. These symptoms usually point to degraded damping or broken mount components, though other drivetrain issues can produce similar sensations.
Can I replace a BMW 7 Series engine mount myself?
Many owners can perform a replacement with moderate mechanical skill, basic tools, and an engine support or hoist. Some mounts require specific torque settings and careful alignment. If you are not comfortable supporting the engine safely or following torque specs, seek professional installation.
How long does a typical engine mount last?
Service life varies depending on driving conditions, exposure to oil and heat, and material quality. Mounts often last several years under normal use, but repeated heavy loads, harsh climates, or fluid leaks can shorten lifespan. Inspect mounts periodically for cracks, separations, or excessive movement.
Will a firmer aftermarket mount increase vibration?
Firmer mounts can transmit more engine vibration into the chassis because they isolate less. While they may improve perceived engine control and handling, expect a tradeoff with NVH. Choose a mount that balances stiffness and damping according to your comfort and driving priorities.
What should I check before buying a replacement mount?
Verify exact fitment for your BMW 7 Series chassis and engine variant, confirm included hardware, and review material and environmental resistance details. Also check recommended torque settings and whether the mount requires special installation steps or tools.
Can engine mounts cause engine misalignment or drivetrain wear?
Yes. Worn or improperly fitted mounts allow excess engine movement, which can stress transmission mounts, CV joints, and exhaust hangers. Replacing mounts with properly fitting units helps maintain alignment and reduces the risk of secondary component wear.
Conclusion
Prioritize exact fitment, material durability, and NVH performance when choosing a BMW 7 Series engine mount. Those factors most directly affect comfort, longevity, and how the engine reacts to torque loads.Balance stiffness against vibration control based on your driving preferences. Ensure proper installation and torque settings to maximize service life and avoid secondary drivetrain issues.
Explore More:
- Check out all BMW 7 Series parts & accessories
- Explore Engine Mounts Maintenance & Repair Guides
- Explore Engine
- Browse all Auto Parts
