Note: This article contains affiliate links. If you click on these links and make a purchase, I may earn a small commission at no extra cost to you. This helps support my research and content. Read my full affiliate disclaimer here.
Picking the right engine mount for your BMW 5 Series matters because mounts directly affect vibration, noise, and drivetrain alignment. The wrong mount can make everyday driving feel rougher and can accelerate wear on transmission and exhaust components. This guide covers the top shortlisted engine mounts selected for reliability and vibration isolation, explaining the tradeoffs buyers typically face. Below you will find clear guidance on what to look for and why each evaluation criterion matters, followed by our top picks for BMW 5 Series engine mount options.
Looking for other parts? See all BMW 5 Series parts & accessories.
Top Picks at a Glance
| Best Reviewed A top-rated pick with lots of positive feedback | EMTMOUN Engine Mount Kit (Front Left & Right) |  |
| Most Popular A crowd favorite that many people choose with confidence | Rockplanet Engine and Transmission Mount Kit (4‑Piece) for BMW 3 Series / 5 Series / Z3 / Z4 |  |
| Best Quality Built to a higher standard if you want something more solid | A-Premium Engine and Transmission Mount Set (4-Piece) |  |
| Best Budget The cheapest option that still gets the job done reliably | MOTOKU Engine Motor Mounts (Driver and Passenger) for BMW 5 Series |  |
| Most Sold A high-volume bestseller chosen again and again | Condor Speed Shop Engine and Transmission Mount Kit — Polyurethane & Aluminum |  |
| Best Value for Money The sweet spot between price and what you get | AUTOKAY Engine Motor Mounts (2-pack) for BMW — Replacement 22116760330 |  |
| Best Overall The best all-around choice for most situations | TRQ 2-Piece Front Engine Mount Set for BMW 5-Series and 7-Series |  |
1. EMTMOUN Engine Mount Kit (Front Left & Right)
| Brand | EMTMOUN |
|---|---|
| Model | Engine Mount Kit |
| Manufacturer Part Number | EM-ZJ338 |
| Compatible OEM Replacements | A4082 (Front Right), A4086 (Front Left) |
This EMTMOUN engine mount kit supplies front left and right motor mounts intended as direct replacements for factory mounts on compatible BMW models. It is typically used when worn mounts cause increased vibration, noise, or engine movement; the kit installs as a bolt-on replacement to restore factory alignment. The parts are described as reinforced steel with high-strength rubber and an advanced damping design, which in practice means they should absorb engine vibration and reduce cabin noise compared with failed mounts. Buyers will appreciate the stated exact-position fit for a straightforward swap and materials aimed at resisting cracking and deformation over time. Limitations to consider are that this is an aftermarket kit rather than a manufacturer part and long-term durability can vary with driving conditions. Also confirm the listed OEM reference numbers match your vehicle before ordering since fitment is specific to certain BMW engines and model years.
Best for: A reliability-focused buyer who prioritizes restoring factory-like vibration control and stable engine support without repeated trips to a shop, aiming for a durable, practical repair.
Less Ideal for: Drivers seeking an OEM-sourced mount or a performance-tuned engine mount for aggressive driving or track use should consider alternatives.
- Direct-fit replacement designed to match factory mounting locations for straightforward installation
- Rubber and reinforced steel construction aimed at reducing engine vibration and lowering cabin noise
- Sold as a matched pair to ensure balanced support and consistent performance across both sides
- Aftermarket part so material longevity may differ from factory-quality mounts
- Fitment is specific to certain BMW models and engine variants requiring verification before purchase
Verdict A practical, direct-fit aftermarket pair that restores engine stability and reduces vibration for reliability-minded BMW owners, provided you confirm exact model fitment.
2. Rockplanet Engine and Transmission Mount Kit (4‑Piece) for BMW 3 Series / 5 Series / Z3 / Z4
| Included components | 4 pieces (2 front engine mounts, 2 rear transmission mounts) |
|---|---|
| Material type | Alloy Steel, Aluminum |
| Mounting type | Vehicle Mount |
| Manufacturer | Kepler |
This Rockplanet kit supplies two front engine mounts and two rear transmission mounts intended to replace worn factory mounts on compatible BMW models. It is used during engine/transmission support repair to stop clunks, reduce vibration, and restore normal drivetrain alignment. The parts are claimed to be alloy steel and aluminum with anti‑corrosion treatment and powder coat finish for basic durability. Buyers report the set installs like the originals and noticeably reduces engine movement and noise when the old mounts are failing. Because it is an aftermarket combo, quality can vary part to part; several customers found fit and finish good while a few reported misaligned welds or bushings that made installation difficult. Expect a hands‑on install that may require alignment effort and some mechanical experience. This kit is a cost‑effective option to replace multiple mounts at once, but if you require precision factory‑level fitment or professional-grade weld quality you may prefer a higher‑end or dealer part.
Best for: Buyers prioritizing convenience and value who want a complete replacement set to quickly address engine/transmission movement and noise on older BMWs without sourcing individual parts.
Less Ideal for: People seeking guaranteed factory‑level tolerances, professional restorations, or zero‑compromise weld quality should consider dealer or premium aftermarket alternatives instead.
- Complete four‑piece kit replaces both front engine mounts and rear transmission mounts so multiple worn units can be swapped at once.
- Anti‑corrosion coating and powder coated finish help resist road corrosion for longer service life.
- Multiple reviewers report a strong fit and noticeable reduction in engine vibration and clunking after installation.
- Aftermarket fitment is inconsistent for some units which can require extra alignment or modification during installation.
- A minority of customers reported poor weld quality or misaligned bushings that prevented bolt installation.
- Not a factory dealer part so finish and tolerances may be lower than premium OEM replacements.
Verdict A budget‑minded four‑piece replacement kit that restores engine stability for compatible BMW models but may require extra care during installation due to variable aftermarket fitment.
3. A-Premium Engine and Transmission Mount Set (4-Piece)
| Set Name | Engine and Transmission Mount Set |
|---|---|
| Included Components | 2x Front Engine Mounts (hydraulic), 2x Transmission Mounts |
| Material Type | Alloy Steel, Aluminum, Rubber |
| Manufacturer | PremiumpartsWhosale |
This A-Premium kit replaces the front left and right engine mounts plus the left and right transmission mounts for compatible BMW models. It is intended for direct replacement use to restore engine positioning and reduce vibration transferred to the chassis. The set uses alloy steel, aluminum and rubber components with powder-coated finishes and is sold as a four-piece kit that meets factory-style fitment references. Typical use is a DIY or shop installation when worn mounts cause excess engine movement, vibration, or noise under acceleration. The practical benefit is a complete front mount refresh in one purchase so you avoid mixing old and new components. The included one-year unlimited-mileage guarantee offers added confidence, and the parts are marketed as having been tested to meet factory-spec standards. Limitations are that this is a direct-fit replacement so it does not upgrade performance damping or offer adjustable mounts for motorsport tuning, and installation may require alignment and standard shop labor to achieve correct engine placement.
Best for: Performance-oriented buyers seeking a high-quality, factory-style replacement to restore engine stability and vibration control in their BMW and who prioritize durable, tested components over aftermarket performance tuning.
Less Ideal for: Drivers looking for stiffer or adjustable mounts for track use or those wanting a performance-focused upgrade rather than a factory-equivalent replacement should consider specialty performance mounts instead.
- Complete four-piece kit covers both front engine mounts and both transmission mounts for a coordinated replacement
- Constructed from alloy steel, aluminum and rubber to match factory-style materials
- Powder-coated finish improves corrosion resistance and longevity
- Sold with a one-year unlimited-mileage guarantee for parts coverage
- Not an upgraded or adjustable performance mount and will not reduce engine movement beyond factory characteristics
- Installation requires correct alignment and may need professional labor for some users
Verdict A factory-style four-piece mount kit that restores engine stability and reduces vibration for buyers who want durable, tested replacements rather than performance upgrades.
4. MOTOKU Engine Motor Mounts (Driver and Passenger) for BMW 5 Series
| Brand Name | MOTOKU |
|---|---|
| Included Components | 2x Engine Motor Mounts |
| Manufacturer Part Number | 22116761089 |
| Compatible Models | BMW 525i 2004-2007, 528i 2008-2009, 530i 2004-2007, 535i 2008-2009 |
These MOTOKU engine motor mounts replace the driver and passenger side mounts on compatible BMW 5 Series models. Sold as a two-piece kit, they install where the engine connects to the subframe and are intended to reduce vibration and maintain correct engine alignment after original mounts wear out. Typical use is a direct replacement during routine repairs or when worn mounts cause excess engine movement, vibration, or drivetrain noise. The listing highlights compatibility with 525i, 528i, 530i, and 535i model years specified, and the pair format makes it straightforward to swap both sides in one job. As a budget option the mounts give a practical way to restore drivetrain stability without paying for factory-brand parts, but buyers should expect basic materials and a possible shorter lifespan compared with higher-end or OEM units. Fit and bolt alignment appear correct for the listed cars, but professional installation and inspection of surrounding components is recommended to ensure long-term performance.
Best for: Budget-conscious owners seeking a low-cost, practical replacement to restore engine stability on the specified BMW 5 Series model years without paying for premium parts.
Less Ideal for: Drivers who prioritize maximum longevity or track/performance use should consider higher-end or factory-quality mounts instead.
- Sold as a matched pair for driver and passenger sides to simplify replacement.
- Listed compatibility with specific BMW 525i, 528i, 530i, and 535i model years for straightforward fitment.
- Lower-cost alternative to factory-quality mounts for budget repairs.
- Compact, direct-replacement design that keeps engine alignment and reduces vibration when functioning properly.
- Likely made with basic materials and may not match the longevity of higher-end or factory-quality mounts.
- Limited to the specific BMW model years listed and not suitable for other years or models.
Verdict A cost-effective, matched pair of replacement engine mounts for specified BMW 5 Series years that restores basic engine stability at a budget price.
5. Condor Speed Shop Engine and Transmission Mount Kit — Polyurethane & Aluminum
| Brand Name | Condor Speed Shop |
|---|---|
| Set Name | Polyurethane |
| Included Components | Polyurethane Engine + Transmission Mount Set |
| Mounting Type | E36 | E46 | Z3 | Z4 | +5mm |
This kit replaces both engine and transmission mounts with a matched set of polyurethane and machined aluminum components to reduce drivetrain movement and sharpen response. It is typically used during performance upgrades, swaps, or when replacing worn rubber mounts to restore a firmer, more connected feel under acceleration, braking, and shifting. Notable features include precision-machined aluminum hardware intended to resist flex and heat and polyurethane bushings for increased stiffness compared with factory rubber. In practice the kit delivers a noticeably tighter driveline and improved shift feel, but the stiffer mounts can transmit more vibration to the cabin, especially at idle. The design raises the engine position by about 5 mm which can affect clearance and may require minor supporting modifications on some chassis setups. Manufactured in the USA, the kit targets builders who want a durable, performance-oriented replacement rather than a comfort-focused OEM-like mount.
Best for: A risk-averse mainstream buyer looking for a reliable, factory-quality performance upgrade for a BMW 5 Series who prioritizes consistent manufacturing and a firmer driving feel over refined comfort.
Less Ideal for: Drivers who prioritize a smooth, quiet daily commute or who cannot tolerate increased vibration and potential clearance changes should consider softer, comfort-oriented replacement mounts instead.
- Complete matched set for engine and transmission to stabilize the whole driveline
- Precision-machined aluminum components resist flex and heat under hard driving
- Polyurethane bushings provide firmer drivetrain control and improved shift feel
- Made in USA manufacturing for consistent machining and materials
- Stiffer mounts increase vibration and harshness at idle and low RPM
- Engine sits approximately 5 mm higher which may require minor chassis or clearance changes
Verdict This matched aluminum and polyurethane mount kit delivers a firmer, more immediate driveline feel for BMW owners willing to accept increased vibration and a slight engine height change.
6. AUTOKAY Engine Motor Mounts (2-pack) for BMW — Replacement 22116760330
| Replace Part Number | 22116760330 |
|---|---|
| Fits For | BMW 128i, 325i, 325xi, 328i, 328i xDrive, 328xi, 330i, 330xi, 335i, 335i xDrive, 335is, 335xi, Z4 (various years) |
| Package Include | 2x Engine Motor Mounts |
| Manufacturer | AUTOKAY |
These AUTOKAY engine motor mounts are a budget-focused, direct-replacement pair intended to restore engine support and reduce vibration on compatible BMW models. They install in the same locations as the factory mounts and are typically used when worn mounts cause excess engine movement, vibration in the cabin, or driveline shudder. The listing identifies the part number 22116760330 and includes two mounts so you can replace both sides in one job. Practical benefits seen in user reports include improved smoothness, straightforward installation and a noticeably lower vibration level compared with failed originals. Some buyers note the mounts are slightly less stiff than factory-spec parts, which can be softer under heavy load but often provides a more compliant ride. A minority of customers reported early failure on a single unit, so longevity may vary with driving style and installation care. These are a cost-effective option if you need a working replacement now and are willing to accept potential variability in long-term durability compared with higher-end, OEM-grade units.
Best for: Practical optimizers who prioritize fixing vibration and restoring usable performance for a reasonable cost rather than chasing OEM-level longevity.
Less Ideal for: Drivers seeking a long-term, high-performance or track-oriented engine mount should consider premium or factory-quality alternatives instead of this budget-focused set.
- Sold as a two-piece set to handle both sides in one service visit
- Direct-fit replacement listed to replace part number 22116760330 for compatible BMW models
- Users report clear reduction in engine vibration and improved ride smoothness after installation
- Affordable aftermarket option compared with factory-quality replacements
- Some units may be less stiff than factory-style mounts, which can change engine feel under high load
- A few reviewers report premature failure on one mount, indicating possible variability in durability
Verdict A cost-effective two-pack replacement that restores engine stability and reduces vibration but may not match OEM stiffness or long-term durability.
7. TRQ 2-Piece Front Engine Mount Set for BMW 5-Series and 7-Series
| Brand Name | TRQ |
|---|---|
| Set Name | 2 Piece Engine Mount Set |
| Material Type | Rubber, Metal |
| Included Components | 1 Front Driver Side Engine Mount, 1 Front Passenger Side Engine Mount |
This TRQ kit supplies both front driver and passenger side engine mounts as direct-replacement parts for the listed BMW 5- and 7-Series model years. It is intended for DIY or shop installation to restore worn mounts, reduce engine vibration, and improve ride smoothness. The mounts arrive pre-assembled where applicable and use rubber-and-metal construction with powder-coated finishes for corrosion resistance. Buyers will appreciate the included compatibility references and TRQ's installation videos that walk through removal and fitment, which helps when working in tight engine bays. Reports from users show reliable hole alignment and a noticeable reduction in engine shake after installation. Limitations to expect are the normal variability of aftermarket longevity compared with factory parts and the occasional need for small hardware adjustments during installation, such as swapping nuts or obtaining a specific bolt, so some basic tools and patience are required. The kit covers front left and right positions only, so additional mounts may be needed for a complete drivetrain refresh.
Best for: Balanced buyers who want a cost-effective, direct-fit replacement to reduce engine vibration and restore ride comfort on older BMW 5- and 7-Series without paying for dealer parts.
Less Ideal for: Drivers seeking factory-quality longevity under heavy use or those who prefer a full drivetrain mount overhaul should consider OEM replacements or a complete mount set instead.
- Includes both front driver and passenger mounts for a matched replacement
- Pre-assembled components and direct-fit design simplify installation
- Rubber-and-metal construction with powder-coated surfaces for corrosion resistance
- Vendor provides DIY installation videos and clear compatibility references
- Aftermarket durability can vary versus factory-quality mounts
- Kit includes only front mounts so other worn mounts are not addressed
Verdict A practical, budget-friendly direct-fit front mount kit for specified BMW 5- and 7-Series that restores comfort quickly but may not match OEM longevity for heavy-duty use.
Choosing the Right BMW 5 Series Engine Mount: Key Factors to Consider
Compatibility and Fitment
Correct compatibility ensures the mount aligns with factory bolt patterns and clearances. A precisely matched mount reduces the risk of stress on adjacent components, prevents premature fastener wear, and avoids interference with intake, exhaust, or accessory brackets.
Fitment also affects installation time and whether additional brackets or spacers are required. Choosing a mount specified for the BMW 5 Series minimizes guesswork, ensures proper driveline geometry, and helps preserve engine and transmission alignment over time.
Vibration Isolation
Vibration isolation determines how much engine movement and vibration reach the cabin and chassis. Softer mounts absorb more vibration, improving ride comfort and reducing perceived engine harshness, but may allow more engine movement under load which can stress linkages.
Stiffer mounts limit movement and can improve throttle response and shifting crispness, but they may transmit more noise and vibration. Consider how much NVH you can tolerate versus how much control you want during spirited driving or towing.
Material and Construction Quality
Mounts are commonly made from rubber, hydraulic fluid-filled elements, or polyurethane; each material has different damping and durability properties. High-quality materials resist oil, coolant, and road contaminants that accelerate degradation.
Robust metal brackets and solid bonding methods reduce the chance of separation under load. Inspect construction notes such as bonded bushings, reinforcement plates, and corrosion-resistant coatings to anticipate longevity and maintenance intervals.
Load Capacity and Torque Handling
The mount must handle the engine's static load and the dynamic torque generated during acceleration and gear changes. A mount rated for insufficient load can deform, leading to misalignment and accelerated wear, while an overbuilt mount might be unnecessarily stiff for daily comfort.
Look for specifications that describe peak load, shear strength, or compatibility with the engine and transmission variants used in the BMW 5 Series to ensure the mount will perform under real driving conditions.
Serviceability and Installation
Ease of installation affects labor time and the likelihood of proper replacement. Mounts that require engine support, special tools, or removal of ancillary parts increase the complexity and cost of installation. Clear access to mounting bolts and well-documented torque specifications make service easier.
Also consider whether replacement requires repositioning the drivetrain or specialist alignment checks afterward. Choosing a mount with straightforward installation reduces shop time and the chance of incorrect fitting.
Durability in Heat and Contaminants
Engine compartments expose mounts to high temperatures, oils, and road salt. Materials that resist heat aging and chemical breakdown retain their damping properties longer and reduce the frequency of replacement.
Evaluate whether the mount design protects critical bonded areas from exposure and whether finishes prevent corrosion. Long-term durability reduces maintenance intervals and keeps vibration and noise characteristics stable over the mount's lifespan.
FAQ
What are common symptoms of a failing engine mount on a BMW 5 Series?
Common signs often include increased vibration felt through the cabin, especially at idle, noticeable clunks or bangs during acceleration or shifting, and unusual movement of the engine under load. Symptoms can vary depending on which mount is worn and the vehicle's driving conditions.
Can I replace a BMW 5 Series engine mount myself?
Many mounts can be replaced by a competent DIYer with proper tools, an engine support, and access to torque specifications. Some mounts require lifting or supporting the engine and may need removal of other components, so assess the needed tools and your mechanical comfort level before attempting a replacement.
How long do engine mounts typically last on a BMW 5 Series?
Mount lifespan depends on driving habits, exposure to oil and heat, and the mount material. Under normal conditions, mounts often last several years or tens of thousands of miles, but frequent spirited driving or leaks that contaminate the mount can shorten service life.
Will a stiffer engine mount reduce vibration in the cabin?
A stiffer mount usually reduces engine movement and can improve perceived control, but it may transmit more vibration and noise into the cabin. The right balance depends on whether you prioritize comfort or sharper drivetrain feedback.
What should I tell my mechanic when ordering a replacement mount?
Provide the vehicle year, engine type, and whether the car has any performance or chassis modifications. Also mention any symptoms you are experiencing, such as vibrations or clunks, so the technician can verify fitment and recommend the appropriate mount spec.
How We Chose the Best BMW 5 Series Engine Mount
We focused on mounts designed specifically for the BMW 5 Series and evaluated candidates across multiple practical dimensions that affect real-world use. Key criteria included material and construction quality to judge durability, vibration isolation performance to assess NVH reduction, fit and mounting geometry to ensure proper drivetrain alignment, and load capacity to match engine and transmission torque. We also considered resistance to oil and heat for longevity and serviceability such as ease of access and replacement. We excluded universal or generic mounts that do not list fitment for the BMW 5 Series and any options that lacked clear specifications on materials or load rating. Our selection emphasizes mounts that balance isolation with control, are built to handle the model's engine torque, and have clear installation considerations and maintenance profiles.
Our full evaluation process is outlined in our review methodology.
Conclusion
When choosing a BMW 5 Series engine mount, prioritize proper fitment, vibration isolation, and material durability. Consider how much engine movement you can tolerate versus the level of control you want under acceleration and shifting. Balance long-term durability and serviceability with the mount's damping characteristics. Paying attention to load ratings, construction quality, and installation complexity will help you select a mount that meets your driving style and reduces NVH while protecting drivetrain components.
Explore More:
- Check out all BMW 5 Series parts & accessories
- Explore Engine
- Browse all Auto Parts
