Note: This article contains affiliate links. If you click on these links and make a purchase, I may earn a small commission at no extra cost to you. This helps support my research and content. Read my full affiliate disclosure here.
When a motor mount starts to fail it can make daily driving uncomfortable and accelerate wear on drivetrain components. Choosing the right Acura TLX engine mount matters because fit, material, and vibration isolation directly affect cabin comfort, transmission behavior, and long-term reliability. This guide presents our shortlisted picks for the best options in this category and explains the criteria used to evaluate them, including durability and vibration performance. Read on to understand which features matter most and how each top pick addresses common symptoms.
Looking for other parts? See all Acura TLX parts & accessories.
Top Picks at a Glance
| Best Reviewed A top-rated pick with lots of positive feedback | TRQ Front Right Engine Mount for Acura TLX and Honda Accord L4 2.0/2.4L |  |
| Most Popular A crowd favorite that many people choose with confidence | maXpeedingrods Front Right Engine Motor Mount for Acura TLX 2.4L (2015–2017) |  |
| Best Quality Built to a higher standard if you want something more solid | SKP SKM9737 Hydraulic Front Engine Mount |  |
| Best Budget The cheapest option that still gets the job done reliably | Hoypeyfiy Right Front Engine Motor Mount (50820T2FA01) |  |
| Most Sold A high-volume bestseller chosen again and again | TRQ Rear Engine Mount for Acura TLX 2.4L and Honda Accord 2.4L |  |
| Best Value for Money The sweet spot between price and what you get | A-Premium Front Right Engine Motor Mount for Acura TLX 2.4L (Passenger Side) |  |
| Best Overall The best all-around choice for most situations | PATEWIN Engine Mount Set (Front + Right) for 2.4L Acura TLX |  |
1. TRQ Front Right Engine Mount for Acura TLX and Honda Accord L4 2.0/2.4L
| Manufacturer | TRQ |
|---|---|
| Model | TRQ MTA79727 Engine Mount |
| Fitment | Front right for Acura TLX 2015-20 and specified Honda Accord L4 models |
This TRQ front right engine mount is a pre-assembled direct-replacement designed for the passenger-side front position on 2015–2020 Acura TLX and several Honda Accord four-cylinder years. It replaces the factory mount to reduce engine movement and vibration transmitted to the chassis, restoring a firmer, quieter feel after the original begins to fail. TRQ highlights machined exterior finish and includes reference part numbers for fit confirmation, and the part comes ready to install which speeds up DIY or shop replacement. For reliability-focused buyers the benefit is predictable, factory-quality fitment that simplifies installation and avoids modification. Limitations are typical for aftermarket mounts: long-term durability depends on driving habits and installation quality, and buyers should verify vehicle-year fitment before purchase. This part is best when you need a straightforward, like-for-like replacement to return NVH and engine positioning to factory expectations.
Best for: Reliability-focused owners who prioritize a straightforward, factory-quality replacement to restore original ride comfort and reduce vibration without modifying the vehicle.
Less Ideal for: Shoppers seeking upgraded or heavy-duty mounts for motorsport or high-torque applications should consider specialty performance mounts instead.
- Direct-fit pre-assembled replacement for front right position, simplifying installation
- Matches factory fit and reference part numbers for straightforward compatibility checks
- Machined exterior finish suggests precise manufacturing tolerances
- Includes manufacturer support resources and DIY installation videos
- Long-term durability may vary with driving conditions and is not guaranteed beyond typical part life
- Not a performance-enhancing or heavy-duty upgrade over factory equipment
Verdict A practical, direct-fit replacement that restores factory ride quality for reliability-minded Acura TLX and compatible Accord owners.
2. maXpeedingrods Front Right Engine Motor Mount for Acura TLX 2.4L (2015–2017)
| Vehicle fitment | Acura TLX 2.4L 2015-2017 |
|---|---|
| Reference numbers | A65054, EM-7134, 50820-T2F-A01 |
| Manufacturer | maXpeedingrods |
This maXpeedingrods front right engine motor mount is a direct-fit replacement for the 2.4L Acura TLX (2015–2017) and is intended to restore factory-style vibration isolation. It installs where the OEM right front mount sits and uses a high-strength metal guard plate combined with a natural rubber bushing to absorb engine movement and lower noise and resonance. In everyday use you can expect smoother idle and reduced driveline shudder compared with a worn mount, and many DIYers and independent shops report straightforward installation when following factory access procedures. The mount is positioned and shaped for a factory-quality fit, but buyers should note it is a single replacement part rather than a full mount set, so replacing only one side may leave other aged mounts to influence NVH. Build quality appears consistent with replacement-grade parts and the seller offers technical support and a limited warranty for peace of mind.
Best for: Convenience-driven TLX owners who want a quick, direct replacement to reduce engine vibration without sourcing dealer parts and who prioritize ease of installation and supplier support.
Less Ideal for: Drivers seeking an OEM-branded mount for exact factory materials or those who prefer replacing all engine mounts at once as part of a comprehensive drivetrain refresh.
- Direct-fit design for Acura TLX 2.4L (2015–2017) intended to match factory mounting points
- Metal guard plate and natural rubber bushing combination reduces vibration and engine noise
- Many users report straightforward installation with common mechanical tools
- Manufacturer provides lifetime technical support and a one-year limited warranty
- Sold as a single mount so other aging mounts may still affect overall vibration if not replaced
- Not an OEM part, so material stiffness and long-term durability can vary versus factory units
Verdict A convenient, direct-fit front right replacement for the 2.4L Acura TLX that restores vibration control affordably but is sold as a single non-OEM mount.
3. SKP SKM9737 Hydraulic Front Engine Mount
| Fits vehicles | Acura TLX 2015 (and specified Honda/Acura models listed) |
|---|---|
| Item model number | SKM9737 |
| Mount type | Hydraulic engine mount |
This SKP SKM9737 hydraulic engine mount is built to replicate the factory mount’s shape and rubber hardness so it installs without modification and keeps engine vibration and harshness at factory levels. It is used as a direct replacement for a worn or failed front mount; installation follows the same mounting points and fasteners as the original part. Notable features include a hydraulic design for improved damping, reinforced construction, and included fasteners on select applications to simplify installation. In real-world use the mount reduces engine movement under load and minimizes vibration transmitted to the cabin, which benefits drivers seeking a firmer, more controlled feel during acceleration and cornering. Limitations are that it is sold individually rather than as a multi-mount set and compatibility is specific to the listed model years, so you must confirm fitment before ordering. The product is backed by a 12 month limited warranty and is aimed at buyers who want a factory-quality replacement without aftermarket modification.
Best for: Performance-oriented buyers who prioritize factory-quality damping and controlled engine movement for a tighter driving feel in their Acura TLX.
Less Ideal for: Buyers looking to replace multiple engine mounts at once or those who prefer adjustable or performance-tuned mounts should consider other options.
- Factory-style hydraulic design for OEM-like vibration damping
- Exact fit design to install without vehicle modifications
- Robust construction and testing aimed at long-term reliability
- Includes OE-equivalent fasteners for simpler installation on select applications
- Sold as a single mount rather than a matched set
- Fitment limited to specific model years and applications so verification is required
Verdict A factory-style hydraulic front mount that restores OEM vibration control and stability for performance-focused Acura TLX owners seeking a direct replacement.
4. Hoypeyfiy Right Front Engine Motor Mount (50820T2FA01)
| Mounting Type | RM |
|---|---|
| Manufacturer | Hoypeyfiy |
| Part Number | 50820T2FA01 |
| Included Components | Right Front Engine Motor Mount |
This Hoypeyfiy right front engine motor mount is a budget-focused replacement designed to fit the 2.4L Acura TLX (2015–2017) and Honda Accord 2.4L (2013–2017). It installs at the right front position to support the engine and isolate vibration from the chassis, restoring stability and reducing noise that develops when an original mount wears out. The listing includes a single replacement mount and lists multiple interchange part numbers for fit confirmation. As a value-oriented part it offers straightforward function and a compact, factory-style profile that makes it suitable for routine DIY swaps or shop installations. Expect the practical benefit of improved engine alignment and reduced driveline vibration without paying for premium branding. Limitations are typical for economy aftermarket mounts: finish and fitment may need minor adjustments during installation and long-term durability may not match higher-end factory-quality replacements.
Best for: Budget-conscious owners looking to restore engine support and reduce vibration affordably while prioritizing cost over brand-premium parts.
Less Ideal for: Drivers seeking longest-lasting, high-end factory-quality replacements or those who prioritize refined finish and maximum longevity should consider higher-grade mounts instead.
- Direct-fit replacement listed specifically for Acura TLX 2.4L (2015–2017) and Honda Accord 2.4L (2013–2017).
- Single-piece right front mount designed to restore engine support and reduce vibration.
- Includes common interchange part numbers to help confirm compatibility before purchase.
- May require minor fitment or alignment adjustments during installation compared with factory-quality mounts.
- Long-term durability and materials finish are not presented as premium and may age faster than higher-end replacements.
Verdict A cost-focused, direct-fit right front motor mount that restores engine support for 2.4L Acura TLX models at a lower cost but with modest trade-offs in long-term refinement.
5. TRQ Rear Engine Mount for Acura TLX 2.4L and Honda Accord 2.4L
| Fitment | Rear engine mount for Acura TLX 2015-20 L4 2.4L and Honda Accord 2013-17 L4 2.4L |
|---|---|
| Manufacturer part number | MTA79730 |
| UPC | 191213797303 |
| Exterior | Machined |
This TRQ rear engine mount is a direct-fit replacement intended to restore engine support and reduce vibration on 2.4L four-cylinder Acura TLX and Honda Accord models. It arrives pre-assembled and machined for a factory-style fit, which simplifies installation for routine DIY repairs or a quick shop swap. The listing emphasizes compatibility and includes reference part numbers to help verify fitment before buying. In use the mount should provide the same basic function as the factory unit: stabilize the engine under load and isolate engine vibration from the chassis. The practical benefits are straightforward: easier installation thanks to the pre-assembled design and TRQ's supporting DIY videos to guide less experienced installers. Limitations are that this is a single replacement mount and not a performance upgrade, so drivers seeking firmer engine control or reduced movement during aggressive driving will not see added stiffness. Also, verify compatibility against your vehicle's VIN or part numbers to avoid fitment mistakes.
Best for: Risk-averse buyers who prioritize a straightforward, factory-style replacement and want clear fitment guidance and installation support.
Less Ideal for: Drivers seeking performance mounts with increased stiffness or track-focused engine control should look at aftermarket performance-specific options.
- Direct-fit design aimed at factory-style replacement for specified Acura TLX and Accord 2.4L models
- Pre-assembled, machined exterior reduces installation time and the need for modifications
- Includes reference part numbers to confirm fitment and avoid ordering errors
- Manufacturer provides DIY videos to guide installation for less experienced users
- Designed as a like-for-like replacement rather than an upgraded or performance-oriented mount
- Compatibility must be double-checked against VIN or parts list to ensure correct fit
Verdict A straightforward, pre-assembled factory-style rear engine mount for TLX/Accord owners who want a reliable, do-it-yourself replacement rather than a performance upgrade.
6. A-Premium Front Right Engine Motor Mount for Acura TLX 2.4L (Passenger Side)
| Vehicle fit | Acura TLX 2015-2020 L4 2.4L |
|---|---|
| Location | Front Right, Passenger Side |
| Material | Steel and Rubber |
| Mounting holes | 4 |
| Quantity sold | One Piece |
This front right engine motor mount replaces the passenger-side mount on Acura TLX models with the 2.4L four-cylinder engine from 2015 through 2020. It is a steel-and-rubber unit with four mounting holes sold as a single piece and is intended to hold the engine in position while isolating vibration and reducing noise. In practice it installs where the factory-style mount did and performs the same basic function: stabilizing the engine during acceleration and smoothing out drivetrain vibration at idle. The steel construction and rubber damping give a familiar balance of strength and compliance for everyday driving. Buyers should expect a straightforward swap for TLX fitment when bolt patterns match, but this is an aftermarket replacement so finish and long-term durability may not match higher-end factory-quality parts. The listing also notes a one-year unlimited-mileage guarantee, which can ease concerns about early failures but does not replace rigorous fit and torque verification during installation.
Best for: Practical optimizers who want a cost-conscious, direct-fit replacement for a TLX 2.4L passenger-side mount and prioritize sensible performance and upfront value.
Less Ideal for: Drivers seeking a premium factory-quality longevity solution or those who prefer a matched set replacement for multiple mounts should consider OEM or high-end alternatives.
- Made for Acura TLX 2015–2020 2.4L passenger-side fitment so bolt locations and orientation match common replacements.
- Steel frame with rubber insert provides conventional vibration damping for smoother idle and reduced cabin noise.
- Sold individually which lets you replace only the failed side without buying a kit.
- Includes a manufacturer one-year unlimited-mileage guarantee for added short-term protection.
- Aftermarket build quality can vary and may not match factory-quality longevity under heavy use.
- Listing does not specify torque specs or installation hardware so additional parts or professional installation may be required.
Verdict A budget-friendly, direct-fit passenger-side replacement for Acura TLX 2.4L that restores engine support and vibration damping at a practical price.
7. PATEWIN Engine Mount Set (Front + Right) for 2.4L Acura TLX
| Vehicle fitment | 2015-2020 Acura TLX 2.4L |
|---|---|
| Set contents | Front mount (A65072) and Right mount (A65054) |
| Bracket material | Carbon steel |
| Finish Type | Rubber |
This PATEWIN two-piece engine mount kit replaces the front and right mounts on 2.4L Acura TLX models and is intended to restore the factory mounting geometry and damping. Designed with carbon steel brackets bonded to rubber insulators, the kit secures the engine, reduces cabin vibration and clunking during gear changes, and helps prevent extra stress on related components like axle joints and exhaust flex pipes. Typical use is a paired replacement when worn mounts cause engine movement, steering tremor at idle, or increased NVH. The direct-fit claim and inclusion of the OEM-equivalent positions (A65072 and A65054) make installation straightforward for a mechanic familiar with TLX engine supports. Limitations include the usual variability between aftermarket and factory parts in long-term durability and occasional fitment labeling errors reported by some buyers, so verify transmission/application details before installation. For a buyer wanting an affordable matched pair to restore ride refinement, this kit covers the essential locations without extra components.
Best for: Balanced buyers who want a practical, cost-conscious repair that restores cabin refinement and powertrain alignment on a 2.4L Acura TLX without overpaying for dealer parts.
Less Ideal for: Shoppers seeking guaranteed factory-level longevity or those who prefer dealer-sourced parts with factory warranty should consider OEM replacements or dealer service alternatives.
- Direct-fit replacements for the front and right 2.4L TLX mount locations (A65072 and A65054)
- Rubber insulators bonded to steel brackets to reduce vibration and restore NVH characteristics
- Sold as a matched two-piece set to address engine alignment and distribute loads evenly
- Designed to protect related components by controlling engine pitch and movement
- Aftermarket construction may not match long-term durability of factory parts
- Some listings have had fitment or transmission-application labeling errors reported by buyers
Verdict A practical matched front-and-right mount kit that restores NVH and engine alignment on 2.4L Acura TLX models at a lower cost than dealer options.
Choosing the Right Acura TLX Engine Mount: Key Factors to Consider
Fit and Vehicle Compatibility
A correct fit matters because the mount must match the Acura TLX's mounting points and engine orientation exactly. Even small deviations in hole spacing or bracket geometry can cause stress concentrations that accelerate failure or lead to vibration transfer. When a mount is designed for the specific chassis, it distributes loads properly and simplifies installation.
Compatibility also affects torque distribution during acceleration and deceleration. A vehicle-specific mount reduces the risk of interferance with surrounding components and ensures that service technicians can follow standard removal and installation procedures without custom adapters.
Material and Construction Quality
Mount materials determine how the component handles heat, oil exposure, and mechanical fatigue over time. High-quality rubber compounds or hydraulic elements resist cracking and maintain damping properties longer than inferior materials. Metal subframes and brackets should be corrosion-resistant and stamped or cast to precise tolerances.
Construction quality matters for long-term value because manufacturing defects or poor bonding between rubber and metal accelerate separation under load. Robust construction also helps the mount maintain consistent NVH characteristics across its service life.
Vibration Isolation and NVH Performance
The primary purpose of an engine mount is to isolate engine vibrations from the cabin and drivetrain. Different designs achieve this with solid rubber, dual-density compounds, or hydraulic damping. The effectiveness of isolation influences perceived comfort, especially at idle and during gear shifts.
Consider how the mount balances isolation with control. Excessive compliance can reduce harshness but allow too much engine movement, which can impact shifting feel. A well-engineered mount reduces engine mount symptoms vibration and minimizes engine mount noise without compromising alignment.
Torque Control and Engine Movement
Torque mounts limit engine roll and forward-back movement when the engine produces torque pulses. Good torque control keeps driveline angles stable, reducing stress on axles, transmission mounts, and exhaust hangers. If a mount is too soft in torsion it can create clunks or increased wear in connected components.
Evaluate how a mount manages dynamic loads during acceleration, deceleration, and sudden throttle changes. Stiffer elements may improve throttle response and shifting precision, while tuned compliance can reduce shock loads transmitted to the chassis.
Durability and Resistance to Environmental Factors
Road salt, oil leaks, and heat from the engine bay all challenge mount longevity. Look for mounts specified to resist oil and ozone degradation and for coatings or materials that withstand high temperatures. Durability reduces the frequency of engine mount replacement and lowers the chance of secondary damage to adjacent parts.
A durable mount maintains its damping characteristics over many miles and is less likely to develop motor mount signs such as cracking or bond failure. Service history and material specifications offer useful indicators of expected lifespan.
Installation and Serviceability
Ease of installation affects labor time and the risk of installation errors. Features such as clear torque specifications, access to mounting bolts, and compatibility with factory hardware simplify service. Some mounts include bushings or studs that align the unit and reduce installation steps.
Consider whether the mount requires engine support tools or special alignment procedures. Accessible designs lower installation complexity and may reduce engine mount installation cost in terms of shop time, while more complicated installs may need professional service to ensure proper torque and fit.
FAQ
What are common symptoms of a failing Acura TLX engine mount?
Common signs often include increased vibration at idle, noticeable engine movement during acceleration, and clunking noises when shifting or when the engine is under load. You may also notice unusual thumping during rapid throttle changes. These symptoms usually appear gradually and can vary with driving conditions.
Can I replace an Acura TLX engine mount myself?
Many mounts can be replaced by a competent DIYer with the right tools and a clear service manual. Tasks typically involve supporting the engine, removing fasteners, and installing the new mount to specified torque values. However, some mounts require tight clearances or special tools, so evaluate your comfort level and consider professional help if access is limited.
How long do engine mounts usually last on a vehicle like the Acura TLX?
Mount lifespan depends on driving habits, exposure to oil or heat, and the mount's construction. They often last many years under normal driving but can fail sooner if exposed to constant high heat or oil contamination. Regular inspection helps catch deterioration before secondary components are affected.
Will a stiffer mount improve shifting feel in the Acura TLX?
A stiffer torque-control element can reduce engine movement and make shifts feel more precise because driveline angles stay more consistent. That said, stiffer mounts can transmit more vibration into the cabin. The right choice balances the desire for crisper shifts against comfort preferences.
What affects engine mount installation cost?
Installation cost is influenced by labor time, the need to support or slightly reposition the engine, and whether special tools are required. Easier-to-access mounts with standard fasteners usually take less time, while designs that require subframe support or removal increase labor. Regional labor rates and shop practices also affect total cost.
Are aftermarket mounts as reliable as OEM parts?
Aftermarket options vary widely in quality. Some match or exceed OEM performance, while others use inferior materials or weaker bonding processes. Look for clear specifications on material, testing, and fitment. Products with good documentation and warranty coverage are generally safer choices.
How We Chose the Best Acura TLX Engine Mount
To build this list we screened many available mounts and prioritized items that meet the real-world needs of Acura TLX owners. Our selection criteria emphasized mounting fit and compatibility with the vehicle's chassis geometry, material construction and resistance to oil or heat degradation, and vibration isolation measured by design features such as bonded rubber or hydraulic damping. We also evaluated mechanical strength and torque-control characteristics to ensure the mount can handle engine movement under acceleration and during gear changes. Ease of installation and the availability of clear installation guidance were included so owners and technicians can assess labor needs. We excluded generic, unspecified-fit units and products lacking clear technical specs or durability data. The final list focuses on mounts that balance longevity, NVH reduction, and reliable mechanical performance for this vehicle.
Our full evaluation process is outlined in our review methodology.
Conclusion
When choosing an Acura TLX engine mount, prioritize correct fit, material quality, and the mount's vibration isolation characteristics. Balance torque-control needs against cabin comfort so the mount reduces engine movement without transmitting excessive noise or harshness. Consider durability and ease of installation as practical tradeoffs. A well-chosen mount will minimize engine mount noise and symptoms, extend the life of adjacent drivetrain components, and keep the vehicle feeling stable and comfortable in everyday driving.
Explore More:
- Check out all Acura TLX parts & accessories
- Explore Engine
- Browse all Auto Parts
