Note: This article contains affiliate links. If you click on these links and make a purchase, I may earn a small commission at no extra cost to you. This helps support my research and content. Read my full affiliate disclosure here.
If you drive an Infiniti G35, a properly functioning EGR valve matters for emissions, throttle response, and engine smoothness. Faulty or clogged EGR valves can lead to rough idle, increased exhaust emissions, and diagnostic codes that affect drivability. This guide presents a shortlist of the top EGR valve options for the Infiniti G35, chosen for fitment, flow characteristics, and reliability.Below you will find the top picks along with the criteria used to evaluate them and practical considerations for replacement, cleaning, and diagnostics.
Looking for other parts? See all Infiniti G35 parts & accessories.
Top Picks at a Glance
| Best Overall The best all-around choice for most situations | Standard Motor Products EGV1134 EGR Valve | ![]() |
| Best Value The sweet spot between price and what you get | Standard Motor Products EGV658T EGR Valve | ![]() |
| Best Budget The cheapest option that still gets the job done reliably | Standard Motor Products EGR Valve EGV1149 | ![]() |
| Highest Rated A top-rated pick with lots of positive feedback | Standard Motor Products EGV537T EGR Valve | ![]() |
| Most Popular A crowd favorite that many people choose with confidence | Standard Motor Products EGV762 EGR Valve | ![]() |
| Best Seller A high-volume bestseller chosen again and again | Delphi EG10535 EGR Valve | ![]() |
1. Standard Motor Products EGV1134 EGR Valve
| Material | Stainless Steel |
|---|---|
| Number of Ports | 2 |
| Inlet Connection Type | Flare |
| Outlet Connection Type | Flare |
| Model | EGV1134 |
This Standard Motor Products EGV1134 is a vehicle-specific EGR valve intended as a factory-replacement style unit for cars that use this part. It replaces a stuck or failing valve to clear P0400-style codes, restore normal idle and throttle response, and return the EGR system to proper operation. Typical use is straightforward: remove the old valve, swap the gasket, and mount the new unit; reviewers report the part is heavy and feels like a factory-quality replacement and that installation can be completed in about 30 minutes on accessible engines. Notable features from the listing include stainless steel construction, machined finish, and two 3.6-inch flare connections which imply robust inlet and outlet fittings. Practical benefits include a direct-fit design that often clears the check engine light and a build that resists corrosion. Limitations include occasional fitment mismatches reported by a few buyers and variability in the supplied gasket quality, so keep the original gasket or have a higher-quality gasket on hand when doing the swap on an Infiniti G35.
Best for: Balanced buyers who want a factory-style, ready-to-install replacement to restore EGR function on their Infiniti G35 and prefer a part that prioritizes fit and corrosion resistance over aftermarket performance tweaks.
Less Ideal for: Anyone seeking a performance-modified or flow-enhanced EGR solution or those unwilling to verify exact part compatibility for their specific G35 model year should consider alternatives.
- Vehicle-specific direct-replacement design that simplifies installation when it matches the application
- Stainless steel construction and machined finish for corrosion resistance and a factory-like feel
- Includes gasket and mounting hardware in most cases so you can complete the repair in one visit
- Some buyers reported fitment issues on certain vehicles indicating the need to verify exact compatibility before purchase
- Supplied gasket construction may be less robust than OEM, so gasket replacement or reuse of OEM gasket is sometimes recommended
Verdict: A factory-style, corrosion-resistant direct-replacement EGR valve aimed at reliably clearing EGR faults and restoring normal operation on compatible Infiniti G35 models.
2. Standard Motor Products EGV658T EGR Valve
| Material | Metal |
|---|---|
| Inlet Connection Type | National Pipe Tapered |
| Outlet Connection Type | NPT |
| Number of Ports | 2 |
The Standard Motor Products EGV658T is a direct-fit replacement EGR valve intended for use where a vehicle-specific unit is required. It controls exhaust gas recirculation to reduce NOx emissions and typically mounts in place of the factory valve using the existing inlet and outlet ports. Notable features listed include machined metal construction, two ports with 0.84 inch NPT connections, and a factory-style inlet taper for straightforward plumbing. In practice this translates to a sturdy, serviceable component that installs without modification on compatible vehicles and restores proper EGR function to reduce rough idle and check-engine codes related to EGR faults. The product is simple and focused with no electronic extras, so benefits are reliability and easy replacement rather than performance gains. Limitations are that fitment is vehicle-specific so confirming Saturn Vue compatibility and matching the original valve is essential, and the part offers no gasket kit or extra hardware in the listing so you may need to supply seals during installation.
Best for: Balanced all-round buyers who want a reliable, no-frills replacement that restores proper EGR operation and keeps emissions systems working as intended on their Saturn Vue.
Less Ideal for: Drivers seeking performance upgrades, plug-and-play electronic enhancements, or a kit that includes all installation hardware should consider other options.
- Direct-fit, vehicle-specific design for straightforward replacement
- Machined metal construction for durability under exhaust conditions
- Standard NPT inlet/outlet sizing compatible with common EGR plumbing
- Simple, factory-style unit that restores emission control function without added electronics
- Listing does not include gaskets or installation hardware
- Not a performance or upgraded unit—designed as a factory-equivalent replacement
Verdict: A sturdy, vehicle-specific replacement EGR valve built to restore factory emission control function on compatible Saturn Vue models.
3. Standard Motor Products EGR Valve EGV1149
| Material | Stainless Steel |
|---|---|
| Inlet Connection Type | Flare |
| Outlet Connection Type | Flare |
| Number of Ports | 2 |
This Standard Motor Products EGR valve is a direct-replacement emission component intended to restore EGR function and clear related diagnostic trouble codes. It installs in the exhaust/EGR path and is used when a failed valve causes rough idle, stalling, or P040x codes. The unit is stainless steel with two ports and flare-style inlet and outlet connections, so it connects using standard fittings and hardware. In real-world use it delivers a factory-quality fit for many applications and has a reputation for straightforward bolt-on installation when access allows. Buyers report quick fixes for running issues and check-engine-light resolution; however some users encountered occasional calibration discrepancies at high load versus factory units and a few received poorly protected packaging. For a budget-focused replacement it offers solid value but technicians should clean the EGR passage during installation and verify operation with a scan tool to ensure proper duty cycle and flow.
Best for: Budget-conscious owners looking for an affordable, OEM-replacement style EGR valve to restore normal operation and clear EGR-related codes without paying dealer prices.
Less Ideal for: Performance-oriented owners who need guaranteed factory-flow characteristics at high engine load or those who require dealer-level calibration and testing should consider higher-spec or factory parts.
- Factory-style flare inlet and outlet connections for straightforward plumbing
- Stainless steel construction resists corrosion compared with cheaper metals
- Direct-replacement design intended to fit without modification
- Widely reported to clear common EGR-related fault codes when installed correctly
- Some users reported the valve did not reach OEM-specified flow at high load in rare cases
- Packaging protection has been inconsistent leading to bent seals on arrival
Verdict: A cost-conscious, direct-replacement EGR valve that delivers factory-style fit and solid value for restoring EGR function.
4. Standard Motor Products EGV537T EGR Valve
| Brand | Standard Motor Products |
|---|---|
| Specification Met | EPA |
| Inlet Connection Type | Threaded |
| Number of Ports | 2 |
This EGR valve is a direct-fit replacement designed to restore the vehicle's exhaust gas recirculation function and help clear related fault codes. It installs in the same location as the original part and is typically used during repair of rough idle, failed emissions tests, or check-engine codes tied to the EGR system. Notable features from the product listing include a painted steel construction, two ports, and threaded inlet connections, which point to a conventional valve built for routine service. For a reliability-focused buyer the practical benefits are straightforward: it provides a like-for-like replacement that many users report fits well and returns drivability and emissions performance to factory-like behavior. Important limitations are variability in long-term durability seen in some user reports and the need to carefully clean mounting surfaces and bolt threads during installation to avoid hardware issues. Expect standard replacement-level performance rather than performance upgrades.
Best for: Reliability-focused buyers seeking a straightforward, factory-replacement EGR valve to restore emissions and driveability on their Infiniti G35 and avoid repeated troubleshooting.
Less Ideal for: Buyers looking for performance upgrades, modification parts, or long-term enhanced durability beyond standard replacement components should consider upgraded aftermarket options.
- Direct-fit, vehicle-specific replacement designed to match factory mounting
- Painted steel construction for basic corrosion resistance
- Includes threaded inlet and two-port configuration matching common factory setups
- Some customers reported leaks or premature failure after extended use
- Installation can be complicated if original mounting bolts are seized and require careful cleaning
Verdict: A practical, vehicle-specific factory-replacement EGR valve aimed at reliably restoring emissions function and drivability.
5. Standard Motor Products EGV762 EGR Valve
| Valve Type | EGR Valve |
|---|---|
| Exterior Finish | Machined |
| Material Type | Metal |
| Included Components | EGR Valve |
This Standard Motor Products EGV762 is an aftermarket EGR valve intended to replace a failed factory unit. It controls exhaust gas recirculation to reduce combustion temperatures and NOx emissions and is typically used when the factory valve leaks, sticks, or triggers an emissions-related fault. The unit is metal with a machined finish and ships as a single component that installs in place of the original part. Practical benefits include a straightforward swap for compatible vehicles and an established aftermarket brand backing the part. Some buyers report reliable fit and improved drivability after installation, while other reports note compatibility and performance issues on certain older GM V8 applications, so careful fit verification is important. This valve is a simple mechanical/electrical replacement rather than an upgraded performance part, so expect factory-quality function rather than improved flow or durability beyond OEM levels.
Best for: Convenience-driven buyers who want a ready-to-install replacement that restores emissions control with minimal fuss and time in the garage.
Less Ideal for: Buyers seeking a performance upgrade, enhanced flow, or a part specifically tested and tuned for Infiniti G35 applications should consider alternatives designed and verified for that model.
- Factory-replacement style design intended for direct swap-in installation
- Machined metal construction for nominal durability
- Ships as a complete single-component unit for straightforward replacement
- Some users report fitment and drivability problems on certain older engines
- Not an upgraded or high-performance unit compared with specialty aftermarket options
Verdict: A straightforward, factory-style replacement EGR valve for drivers who want a quick, no-frills fix to restore emissions function.
6. Delphi EG10535 EGR Valve
| Exterior Finish | Machined |
|---|---|
| Inlet Connection Type | Flange |
| Outlet Connection Type | Flange |
| Number of Ports | 2 |
| Valve Type | Globe Valve |
The Delphi EG10535 is an aftermarket EGR valve intended as a direct replacement to restore proper exhaust gas recirculation and reduce emissions-related drivability issues. It installs in place of a failed valve and is used to regulate exhaust flow back into the intake to control combustion temperatures and prevent excessive NOx. Notable features include machined valve and seat surfaces, flange inlet and outlet connections, and a two-port globe valve design that aims for precise flow control and quiet operation. Delphi states the part is built in an ISO-certified facility with validated components and comes with gaskets to simplify installation. In practice this should provide stable operation and fewer installation hassles for a correct-fit application, though warranty handling is seller-dependent when purchased through some channels. Buyers should also confirm fitment to their specific Infiniti G35 year and engine since EGR configurations vary by model year and engine variant. Professional installation or diagnostic reset may be required to clear codes and adapt the system after replacement.
Best for: Risk-averse mainstream buyers seeking a reliable, factory-style replacement to address EGR-related check-engine lights and drivability issues on an Infiniti G35 who prioritize predictable parts performance and reduced installation fuss.
Less Ideal for: Buyers wanting a performance-modified EGR solution or those who need aftermarket parts with explicit seller-backed warranty terms should consider other options.
- Direct-fit design with flange connections and included gaskets to simplify installation
- Precision-machined valve and seat for consistent exhaust flow control
- Manufactured in an ISO-certified facility using validated components
- Two-port globe valve design intended for quiet and stable operation
- Warranty coverage varies depending on seller rather than being provided directly by the brand when purchased through some channels
Verdict: A factory-style, precision-machined replacement EGR valve built to provide dependable exhaust flow control and simplify direct-fit installation.
Choosing the Right Infiniti G35 EGR Valve: Key Factors to Consider
Fitment and Mounting Compatibility
Exact fitment to the Infiniti G35 is essential because the EGR valve must align with intake and exhaust ports and bolt patterns. Incorrect fit or offset mounting can create exhaust leaks or require manifold modification, which increases installation complexity and risk of failure.
Check that mounting holes, flange orientation, and electrical or vacuum connectors match the vehicle. Proper fit reduces the chance of gaskets failing and ensures the valve seals correctly under thermal cycling.
Valve Flow Characteristics
The EGR valve controls how much exhaust gas recirculates into the intake; its flow profile affects combustion temperature and emissions. A valve that restricts flow too much can reduce the intended EGR effect, while an overactive valve can cause rough idle or stalling.
Look for valves specified with flow rates or designed to match factory flow characteristics. Consistent and predictable flow across operating conditions helps maintain engine stability and emissions compliance.
Actuator Type and Reliability
EGR valves use either electrical actuators or vacuum diaphragms to modulate position. Actuator reliability affects how accurately the valve responds to engine control signals and how long the unit lasts under heat and vibration.
Consider the history of actuator failure modes in this category, such as sticking, loss of vacuum, or electrical corrosion. Durable connectors, protected wiring, and sealed actuators reduce the chance of intermittent faults and diagnostic trouble codes.
Materials and Corrosion Resistance
EGR valves are exposed to hot, corrosive exhaust gases and soot. Materials and coatings influence how quickly internal surfaces degrade or accumulate deposits that lead to sticking.
Choose valves constructed from corrosion-resistant metals and with finishes that tolerate high temperatures. Better materials reduce maintenance frequency and extend service life, especially in engines that experience heavy city driving or extended idling.
Serviceability and Installation
Ease of installation affects both DIY and professional replacements. Serviceability includes access to mounting bolts, whether a replacement uses the same gasket interface, and if the valve can be cleaned or rebuilt without full removal.
Valves that share factory bolt patterns and use standard gaskets simplify replacement. Consider whether the design allows cleaning of the pintle or passages and whether connector locations reduce the risk of damage during installation.
Diagnostics and Compatibility with Engine Controls
A compatible EGR valve must communicate properly with the vehicle control system to avoid false error codes and preserve drivability. Mismatched response characteristics can trigger codes related to flow or position and affect emission monitoring.
Confirm that the replacement reports expected position or follows typical response curves for the G35. Understanding common diagnostic codes and how the valve should behave helps when testing or troubleshooting after installation.
How We Chose the Best Infiniti G35 EGR Valve
We focused on components that directly affect emissions control and engine idle quality for the Infiniti G35. Key evaluation criteria included fitment accuracy to the G35 intake and exhaust ports, valve flow characteristics and backpressure implications, materials and corrosion resistance for long-term durability, actuator reliability for electrically or vacuum-operated units, and ease of installation including mounting and gasket interfaces.We prioritized items that matched factory mounting points and flow specifications to avoid drivability issues. We excluded products without clear fitment data for the Infiniti G35, universal units requiring major modification, and listings lacking documented material or actuator details. Practical serviceability and availability of compatible gaskets and hardware were also considered, as these affect installation success and long-term performance.
Our full evaluation process is outlined in our review methodology.
FAQ
What are common symptoms of a failing EGR valve on an Infiniti G35?
Common symptoms often include rough or fluctuating idle, reduced fuel efficiency, and increased exhaust emissions. You may also notice a check engine light with emission-related fault codes. Symptoms can vary depending on whether the valve is stuck open, stuck closed, or leaking.
Can I clean the EGR valve instead of replacing it?
Cleaning can be an effective short-term fix if the valve is clogged with carbon deposits and the actuator is otherwise functional. It usually involves removing the valve and cleaning passages and the pintle. However, if the actuator or valve body is damaged or corroded, replacement is often the more reliable long-term solution.
How do I test an EGR valve on an Infiniti G35?
Testing depends on actuator type. For vacuum units, you can apply controlled vacuum while monitoring engine response. For electrical units, check connector voltages and actuator movement with a controlled input. Many diagnosis steps also include scanning for related fault codes and observing live data for position or commanded duty cycle.
Do I need a new gasket when replacing the EGR valve?
Yes, it is usually advisable to replace the gasket whenever the EGR valve is removed. A fresh gasket helps ensure a proper seal between the valve and manifold, preventing exhaust leaks that can affect performance and emissions.
What does code P0401 mean and how is it related to the EGR valve?
Code P0401 indicates insufficient EGR flow. It often points to a clogged passage, a stuck valve, or an electrical/actuator fault preventing proper operation. Diagnosis typically involves inspecting the valve and passages, testing actuator function, and verifying control signals.
Are refurbished EGR valves a good option compared to new units?
Refurbished units can be cost-effective if they have been properly rebuilt and tested. Their suitability depends on the quality of the refurbishment, the condition of the actuator, and any warranty or testing documentation. New units offer the benefit of unused components but may cost more.
Conclusion
When choosing an EGR valve for the Infiniti G35, prioritize correct fitment, matching flow characteristics, and a reliable actuator to maintain emissions control and engine smoothness. Consider materials and serviceability to minimize future maintenance needs.Balance the tradeoffs between cleaning and replacement based on actuator condition and diagnostic findings. Replacing the gasket during any service and verifying proper operation with diagnostic testing will reduce the chance of recurring issues.
Explore More:
- Check out all Infiniti G35 parts & accessories
- Explore EGR Valves Maintenance & Repair Guides
- Explore Engine
- Browse all Auto Parts





