Note: This article contains affiliate links. If you click on these links and make a purchase, I may earn a small commission at no extra cost to you. This helps support my research and content. Read my full affiliate disclaimer here.
If your Nissan Altima is showing vibration, clicking, or grease near the wheel, selecting the right CV axle matters for safe, quiet driving. The right axle restores reliable power transfer to the front wheels and prevents further drivetrain damage. This guide covers our seven shortlisted Nissan Altima CV axle options and explains the practical reasons they made the cut. We evaluated fitment, joint durability, and seal quality to help you decide which replacement suits your needs. Read on for the factors to weigh before choosing a replacement CV axle and what to expect during installation.
Looking for other parts? See all Nissan Altima parts & accessories.
Top Picks at a Glance
| Best Reviewed A top-rated pick with lots of positive feedback | A-Premium Pair Front CV Axle Shaft Assembly for Nissan Altima 2013–2018 L4 2.5L Sedan |  |
| Most Popular A crowd favorite that many people choose with confidence | Carock Front CV Axle Pair for 2013–2018 Nissan Altima (Left & Right) |  |
| Best Quality Built to a higher standard if you want something more solid | A-Premium Front Right CV Axle Shaft Assembly for Nissan Altima/Rogue (Passenger Side) |  |
| Best Budget The cheapest option that still gets the job done reliably | TAUTOY CV Axle Shaft Assembly for Nissan Altima Front Right Passenger Side |  |
| Most Sold A high-volume bestseller chosen again and again | Autoround CV Axle Shaft Assembly, Front Right Passenger Side for Nissan Altima (2013–2018) |  |
| Best Value for Money The sweet spot between price and what you get | KAX Front Right CV Axle Shaft for 2013–2018 Nissan Altima |  |
| Best Overall The best all-around choice for most situations | TRQ Front Driver and Passenger CV Axle Assembly Set (2-piece) for Nissan Altima |  |
1. A-Premium Pair Front CV Axle Shaft Assembly for Nissan Altima 2013–2018 L4 2.5L Sedan
| Vehicle fitment | Nissan Altima 2013-2018 L4 2.5L Sedan |
|---|---|
| Location | Front left and right (driver and passenger side) |
| Axle nut | Included |
| Input shaft spline count | 27 |
| Output shaft spline count | 32 |
These A-Premium front CV axle assemblies replace both left and right half-shafts on Nissan Altima 2013–2018 L4 2.5L sedans and are intended as direct factory-replacement units. They come as a matched pair with axle nuts included and factory-style splines for straightforward installation by a mechanic or competent DIYer. Practical benefits include restoring driveline smoothness and eliminating common CV-axle symptoms such as clicking on turns or vibration under acceleration. Several buyers report easy fitment and durable performance, though there are some quality-control reports such as mismatched lengths or shipping damage in isolated cases, so inspect parts on arrival. The assemblies do not include an ABS ring, which means vehicles that rely on a preinstalled ABS tone ring will require transferring the original ring or sourcing one separately. A-Premium backs the parts with a one-year unlimited-mileage guarantee, making this a sensible reliability-focused replacement when you need both sides replaced together rather than piecemeal repairs.
Best for: A reliability-focused buyer who wants a complete front-axle replacement to restore drivability on a Nissan Altima 2013–2018 L4 2.5L sedan and prefers replacing both sides at once for consistent performance.
Less Ideal for: Shoppers who need an axle with a preinstalled ABS tone ring or those seeking a single-side quick repair should consider other options.
- Sold as a matched pair to ensure consistent fit and driveline balance
- Includes axle nuts for a more complete installation package
- Designed to match factory spline counts for direct connection to transmission/differential
- One-year unlimited-mileage guarantee provides backup after installation
- ABS ring is not included so vehicles needing a tone ring must transfer the original or source one separately
- Some buyers reported occasional fitment or shipping damage issues requiring inspection on arrival
Verdict A practical matched-pair replacement for front CV axles on 2013–2018 Nissan Altima 2.5L sedans that favors reliability and comes with a one-year guarantee, but it lacks a preinstalled ABS ring.
2. Carock Front CV Axle Pair for 2013–2018 Nissan Altima (Left & Right)
| Fitment | 2013-2018 Nissan Altima 2.5L (S SL SV SR Base Advance Sense) |
|---|---|
| Position | Front |
| Included | Driver and passenger axle assemblies |
| Manufacturer | Carock |
This Carock kit supplies both front CV axle shafts (driver and passenger) intended as direct replacements for 2013–2018 Nissan Altima 2.5L models. It is used to replace worn or torn CV joints and boots that cause clicking, vibration, or grease leakage. The listing emphasizes solid steel axle shafts and factory-quality inspection before shipping, which suggests durability and straightforward bolt-in fit when the correct fitment is selected. Buyers get both sides in one purchase, which simplifies servicing and saves the time of sourcing individual axles. Several customer reports mention good fit and easy installation, though a minority report early failure or fitment mismatch, so careful verification of vehicle submodel is important. Expect to install these when addressing driveline noise or handling issues; professional installation will save time for drivers who prefer convenience. The package may ship from multiple warehouses, so parts can arrive separately.
Best for: Drivers who prioritize convenience and want a ready-to-install matched pair to quickly restore a Nissan Altima 2.5L’s front driveline without hunting for separate parts.
Less Ideal for: Buyers who need guaranteed long-term commercial-grade durability or those unwilling to verify exact submodel fitment should consider sourcing from a dealership or higher-tier aftermarket brands.
- Sold as a matched pair so both front axles are replaced at once, reducing repeat labor.
- Solid steel axle shafts with factory inspection claimed for durability.
- Direct-fit replacement for specified 2013–2018 Nissan Altima 2.5L submodels when fitment is confirmed.
- Includes both driver and passenger assemblies to simplify repair planning.
- Some buyers reported premature failures, indicating variable long-term reliability.
- A few customers experienced fitment issues, so incorrect selection is possible.
- No explicit warranty information is provided in the product details.
Verdict A convenient matched pair of front CV axles for 2013–2018 Nissan Altima 2.5L that simplifies repair but requires careful fitment checking due to mixed reliability reports.
3. A-Premium Front Right CV Axle Shaft Assembly for Nissan Altima/Rogue (Passenger Side)
| Location | Front Right (Passenger Side) |
|---|---|
| Axle Nut Included | Yes |
| ABS Ring Included | No |
| Input Shaft Spline Count | 27 |
| Output Shaft Spline Count | 29 |
This A-Premium front right CV axle replaces the passenger-side half-shaft on compatible Nissan Altima and Rogue FWD models and restores power delivery from the transmission to the wheel. It is supplied as a complete assembly with axle nut and the correct spline counts so installation is straightforward for a competent DIYer or shop. Typical use is direct replacement after a worn CV joint or torn boot causes noise, vibration, or grease loss. Notable features listed by the manufacturer include a factory-style spline fit, included axle nut, and a one-year unlimited-mileage guarantee. In practice that means you can expect an OEM-like fitment and quick swap-in without chasing small parts. Limitations are that this specific part does not include an ABS ring and fitment is limited to specified Altima and Rogue model years and configurations, so verify vehicle submodel and transaxle before ordering. Some buyers report long-term reliability is mixed, so professional installation and post-install inspection are advisable for peace of mind.
Best for: Performance-oriented buyers who prioritize a factory-style replacement that restores driveline smoothness and allows quick, confident installation to get their Nissan Altima back to normal handling and NVH levels.
Less Ideal for: Buyers looking for a part that includes every accessory or ABS components built in, or owners who prefer to source locally for extended return windows and on-site support.
- Complete axle assembly with axle nut included for a faster direct replacement
- Factory-style spline counts for correct fit to the transmission and hub
- Straightforward swap-in that eliminates CV-joint noise and vibration when matched to vehicle fitment
- One-year unlimited-mileage guarantee from the brand for short-term coverage
- Does not include an ABS tone ring which may be required on some vehicles
- Fitment is specific to certain model years and FWD/transaxle configurations so it is not universal
- Some user reports indicate variable long-term durability compared with OEM parts
Verdict A solid factory-style passenger-side replacement for Altima/Rogue owners who want OEM-like fit and quick installation but verify ABS and exact model fitment before buying.
4. TAUTOY CV Axle Shaft Assembly for Nissan Altima Front Right Passenger Side
| Vehicle fitment | 2007-2013 Nissan Altima and specified Nissan models |
|---|---|
| Position | Front right passenger side |
| OEM part numbers | 39101ET80C, 39101JA010, 39101JG02C |
| Manufacturer | TAUTOY |
This TAUTOY front right CV axle shaft assembly is a direct-replacement half-shaft intended for use on compatible Nissan Altima and related Nissan models. It arrives as a complete axle with boots and grease installed so it is ready for installation during a front-end service or axle swap. The listing highlights precision-machined transmission seal diameter and high-temperature grease formulation, which should help the joint resist heat and torque in everyday driving. For a budget-focused buyer the practical benefits are clear: it provides a factory-style replacement without buying an expensive dealer part and the included grease and boots simplify installation. Limitations to expect are variable long-term durability with lower-cost aftermarket brands and mixed user reports on lifespan, so expect to verify fit and inspect boots after a few thousand miles. If you plan repeated heavy towing or performance use, a premium axle from a larger aftermarket supplier may be worth considering.
Best for: Budget-conscious owners seeking an affordable, ready-to-install front right CV axle replacement for routine repairs on a Nissan Altima who prioritize cost savings over premium long-term warranties.
Less Ideal for: Drivers who routinely tow, carry heavy loads, or demand maximum longevity should consider higher-end assemblies from established heavy-duty aftermarket brands instead.
- Complete assembly with boots and grease included for straightforward installation
- Manufacturer states precision-machined seal diameter for consistent fit
- Grease rated for high temperature and torque demands to support normal driving loads
- Fits specific Nissan Altima and similar Nissan front-right applications
- Durability can vary compared with higher-end aftermarket or OEM replacements
- Limited manufacturer reputation compared with larger established parts brands
Verdict A cost-focused, ready-to-install front right CV axle for Nissan Altima owners who want a factory-style replacement without paying dealer prices, with some compromise on long-term durability.
5. Autoround CV Axle Shaft Assembly, Front Right Passenger Side for Nissan Altima (2013–2018)
| Compatibility | Nissan Altima 2013-2018 L4 2.5L Sedan |
|---|---|
| Position | Front Right Passenger Side |
| Manufacturer Part Number | CTCV0218 |
| Brand | Autoround |
| Warranty | 3 year warranty |
This Autoround CV axle shaft assembly is a ready-to-install replacement for the front right passenger side of 2013–2018 Nissan Altima 2.5L sedans. It ships as a complete half-shaft assembly so installation is straightforward for a mechanic or competent DIYer replacing a worn or noisy axle. The listing states the part is manufactured to factory specifications and factory-tested for durability and performance, which suggests it is built to match fit and function of the original component. Buyers can expect typical benefits of a full-assembly replacement: faster installation because there is no need to transfer joints or boots, and a sealed joint out of the box. Reported customer feedback shows consistent fitment for several model years, though there are a few complaints about defective or reconditioned items arriving, so inspect the part on arrival. A three year warranty is offered, which provides additional reassurance for risk-averse buyers. Keep in mind quality can vary between aftermarket batches and fitting requires correct alignment and torque during installation.
Best for: Risk-averse mainstream buyers who prioritize a straightforward, factory-quality replacement that minimizes installation complexity and reduces uncertainty when restoring a Nissan Altima to reliable operation.
Less Ideal for: Shoppers looking for a universal axle or multi-vehicle compatibility, or those who prefer OEM dealer parts with guaranteed original manufacturing provenance should consider alternatives.
- Direct-fit replacement for Nissan Altima 2013–2018 2.5L sedans, simplifying part selection.
- Ships as a complete half-shaft assembly for faster installation without transferring components.
- Manufacturer states factory-guided production and factory testing for reliability and performance.
- Three year warranty provides added protection against early failures.
- Some buyers reported receiving faulty or reconditioned units, indicating inconsistent quality control.
- Limited to front right passenger side application and the specified Altima sedan fitment only.
Verdict A practical, direct-fit full CV axle assembly aimed at buyers who want a quick factory-style replacement for 2013–2018 Nissan Altima sedans, but inspect incoming parts due to occasional quality issues.
6. KAX Front Right CV Axle Shaft for 2013–2018 Nissan Altima
| Vehicle fitment | Nissan Altima 2013-2018 |
|---|---|
| Position | Front Right |
| OEM part numbers | 666431, 66-6431, 391003NT0A, APCVA875 |
| Manufacturer | KAX |
This KAX front right CV axle is a direct-replacement half shaft built to match factory fit for Nissan Altima 2013–2018. It is supplied as a complete axle assembly so installation is straightforward during a front-end service or axle swap, and buyers report it cures common vibration and noise issues. The listing emphasizes built-to-OEM dimensions and 100 percent inspection of critical butt measurements, which helps with fitment and reduces the need for modification. Components are heat-treated and finished to resist harsh road conditions, and the axle arrives painted to limit corrosion prior to installation. On the downside, a few users found dimensional variance between left and right parts, so careful pre-fit checks and having a backup plan with a mechanic is sensible. This unit is a practical, lower-cost alternative to dealer parts when you want a factory-style replacement without paying dealer rates.
Best for: Practical optimizers looking to restore Altima drivability on a budget will appreciate a factory-style replacement that balances cost and function for routine repairs.
Less Ideal for: Owners seeking a lifetime or heavily guaranteed premium axle from a dealership supplier or those who need guaranteed identical pair matching for performance builds should consider higher-end alternatives.
- Complete axle assembly for straightforward replacement without sourcing separate joints or shafts
- Manufactured to match OEM critical dimensions to improve fitment and reduce installation tweaks
- Heat-treated, one-piece treated components for improved durability in demanding conditions
- Painted finish to resist pre-installation corrosion
- Some reports of slight dimensional variance between units which may require verification at install
- No explicit warranty or coverage information provided in the product listing
Verdict A cost-conscious, factory-fit front-right CV axle for 2013–2018 Altima that restores drivability with reasonable durability but warrants fit verification at install.
7. TRQ Front Driver and Passenger CV Axle Assembly Set (2-piece) for Nissan Altima
| Vehicle fit | Nissan Altima (specified model years listed by manufacturer) |
|---|---|
| Kit contents | Front driver and front passenger CV axle assemblies |
| Boot material | Neoprene |
| Grease type | Moly greased |
This TRQ kit supplies both left and right front CV axle assemblies engineered as direct-fit replacements for compatible Nissan Altima models. Each axle arrives pre-assembled with neoprene boots, moly grease, and factory-style splines so the units install without modification and restore driveline smoothness. Practical benefits include improved boot durability over stock rubber and a grease formulation aimed at reducing premature wear, which helps cut repeat repairs. TRQ also provides installation guidance and DIY videos, which is helpful for home mechanics tackling a front-axle swap. Buyers should note that while many users report solid fit and quick restoration of handling, quality can vary between batches and some customers have experienced premature boot failure. That means keeping an eye on boot condition after installation and addressing any leaks promptly. For most Altima owners replacing worn or noisy CV axles, this kit delivers a convenient, value-focused replacement with generally good real-world performance but not necessarily identical long-term characteristics to higher-end factory-quality units.
Best for: Balanced, practical buyers who want a straightforward, value-minded front-axle replacement for a Nissan Altima and prefer a ready-to-install kit with DIY support.
Less Ideal for: Buyers seeking a factory-quality longevity upgrade for heavy-duty or performance driving should consider premium OEM-level options or professional-grade parts instead.
- Sold as a pair covering both front sides for a single repair job
- Pre-assembled direct-fit design eliminates the need for modifications
- Neoprene boots and moly grease intended to improve durability over stock components
- Includes manufacturer installation resources and DIY videos to aid home mechanics
- Some users report occasional early boot splits or grease leaks indicating variable batch quality
- Not guaranteed to match every long-term vibration-damping characteristic of higher-end factory-quality axles
Verdict A convenient, value-focused pair of front CV axles that restore drivability on Nissan Altima models with generally good fit and durability but with some variability in boot longevity.
Choosing the Right Nissan Altima CV Axle: Key Factors to Consider
Correct Vehicle Fitment
Correct vehicle fitment determines whether the axle installs without modification and maintains proper geometry. An exact fit prevents undue stress on wheel bearings, hubs, and suspension components, which can otherwise lead to premature wear or handling issues.
Verify spline count, shaft length, and orientation specific to the Nissan Altima. Proper fitment also ensures that ABS tone rings and flange patterns align, avoiding sensor faults and the need for additional parts during installation.
CV Joint Construction And Materials
The CV joint is the component that transmits torque through steering angles and suspension travel, so its construction directly affects longevity and noise levels. Look for hardened bearing surfaces, quality cage design, and precision machining that reduce wear and maintain smooth articulation over time.
Higher-quality joint materials and heat treatment reduce the risk of premature failure, especially for drivers who frequently encounter potholes, steep driveways, or heavy loads that increase joint stress.
Boot And Seal Quality
Boots and seals keep grease in and contaminants out, which is essential for joint life. A robust boot material and a secure clamp system resist tears and slipping, reducing the likelihood of grease leakage and grit ingress that cause joint wear.
Inspect the design for double clamps or reinforced lips where the boot meets the shaft. Better sealing improves reliability and reduces the frequency of future service due to boot failure.
Shaft Strength And Balance
The axle shaft must withstand repeated torque and bending forces without flexing excessively. Proper shaft diameter, material choice, and balancing reduce vibration at highway speeds and prevent cyclical loading that can damage other driveline parts.
Balanced shafts limit resonance that a worn or poorly made shaft might introduce. Consider shafts with documented balance processes or quality control measures to minimize vibration-related complaints.
Installation Hardware And Documentation
Complete installation hardware and clear documentation lower the risk of installation errors. Axles that include necessary nuts, bolts, or correct-length circlips cut down on installation time and ensure proper torqueing.
Clear fitment guides and labeled parts help both DIYers and professional installers verify compatibility quickly. Parts without proper hardware can add expense and complicate the repair.
Warranty And Support
A reasonable warranty signals manufacturer confidence and provides protection against early failure. Warranties that cover material and workmanship issues give peace of mind and can be decisive when choosing between otherwise similar axles.
Consider the warranty duration and what it covers, along with the availability of customer support or clear return processes in case of fitment or quality issues.
FAQ
What are common symptoms of a failing CV axle on a Nissan Altima?
Common signs include clicking or popping noises when turning, visible grease near the wheel or undercarriage, vibration during acceleration, and reduced steering smoothness. These symptoms often appear gradually and tend to worsen with use.
Can I drive my Altima with a torn CV joint boot?
You can often drive a short distance, but a torn boot allows grease to escape and contaminants to enter, accelerating joint wear. It is usually best to address a torn boot promptly to avoid full joint failure that would require axle replacement.
How different is half shaft replacement compared with a full axle swap?
A half shaft replacement usually refers to replacing the complete axle assembly, including the shaft and joints. Installing a full assembled axle is typically faster and reduces the risk of improper joint servicing compared with rebuilding individual joint components.
Will axle vibration at highway speed always mean the CV axle is bad?
Not always. Vibration at speed can stem from wheel imbalance, tire issues, worn wheel bearings, or drivetrain components. CV axle problems are one possible cause, especially if vibration changes with acceleration or steering angle, but diagnosis should check multiple systems.
How do I know if a replacement CV axle will fit my Altima?
Confirm fitment by matching the vehicle year, submodel, and whether the axle is for the front left or right position. Check spline count, shaft length, and any ABS or flange requirements listed in the part documentation to ensure correct fit.
How We Chose the Best Nissan Altima CV Axle
We focused on parts that provide correct fitment and durable joint performance for Nissan Altima models. Primary evaluation criteria included precise vehicle-specific fitment, CV joint material and construction, boot and seal quality, and overall shaft strength and balance. We also considered ease of installation, availability of replacement hardware, and the clarity of fitment documentation. Excluded from consideration were universal or generic shafts not explicitly designed for the Nissan Altima, components without clear fitment data, and parts lacking adequate sealing or materials information. Our intent was to shortlist axles that minimize drivetrain vibration, resist boot failure, and offer straightforward fitment for commonly encountered Altima driveline layouts.
Our full evaluation process is outlined in our review methodology.
Conclusion
Prioritize exact fitment, robust CV joint construction, and high-quality boot sealing when choosing a Nissan Altima CV axle. These factors most directly affect noise, vibration, and long-term reliability. Keep installation readiness and warranty support in mind as secondary priorities. Balancing those tradeoffs will help you select an axle that restores smooth steering and minimizes repeat shop visits.
Explore More:
- Check out all Nissan Altima parts & accessories
- Explore Transmission & Drivetrain
- Browse all Auto Parts
