Note: This article contains affiliate links. If you click on these links and make a purchase, I may earn a small commission at no extra cost to you. This helps support my research and content. Read my full affiliate disclosure here.
If you drive an Infiniti QX60, the cooling fan plays a key role in keeping engine temperatures in a safe range and preventing heat-related damage. Choosing the right Infiniti QX60 cooling fan affects cabin comfort, engine longevity, and how the vehicle performs in traffic or hot weather.This guide covers the top shortlisted cooling fans for the QX60, explaining why each made the list and the criteria we used to evaluate them, including airflow capacity and electrical reliability. Read on to find the options that match your priorities and typical driving conditions.
Looking for other parts? See all Infiniti QX60 parts & accessories.
Top Picks at a Glance
| Best Overall The best all-around choice for most situations | Dorman Engine Cooling Fan Assembly for Select Infiniti/Nissan Models |  |
| Best Value The sweet spot between price and what you get | labwork Radiator A/C Condenser Cooling Fan Assembly for Nissan Pathfinder / Infiniti QX60 |  |
| Best Budget The cheapest option that still gets the job done reliably | PartsFlow Radiator and Condenser Cooling Fan (fits Infiniti QX60 / JX35 / Nissan Pathfinder) |  |
| Highest Rated A top-rated pick with lots of positive feedback | waltyotur Dual Radiator Fan Assembly with Control Module (Replacement for NI3115149) |  |
| Most popular A crowd favorite that many people choose with confidence | Fekuar Dual Radiator and Condenser Fan Assembly (no motor) |  |
| Best Seller A high-volume bestseller chosen again and again | PartsFlow Radiator and Condenser Cooling Fan with Control Module for Infiniti QX60 / Nissan Pathfinder Fitment |  |
1. Dorman Engine Cooling Fan Assembly for Select Infiniti/Nissan Models
| Power Connector Type | 6-Pin |
|---|---|
| Voltage | 12 Volts |
| Wattage | 80 watts |
| Maximum Rotational Speed | 3500 RPM |
This Dorman cooling fan assembly replaces the radiator fan on select Infiniti QX60, JX35 and Nissan Pathfinder model years and is built to match factory fit and function. It arrives as a complete assembly with motor and wiring harness so you can swap the unit in without sourcing separate components. The motor is tested in laboratory settings and the assembly uses the same materials and mounting points as the original, which helps restore cooling performance and keeps engine temperatures in check during daily driving and towing. Installers report the part can be tight to position under the hood and may require battery or module removal for clearance, so plan several hours if you are doing the job yourself. Some buyers noted the control module or connector differs from the factory piece, which can require wiring attention if reusing original modules. Given its price point versus dealer parts, this assembly is a practical, cost-effective option for owners who need a full replacement fan and expect near-factory cooling performance.
Best for: A balanced all-round buyer who wants a reliable, cost-conscious factory-quality replacement for cooling issues on Infiniti QX60 or the listed Nissan models and is comfortable with a moderate DIY install or working with a local shop.
Less Ideal for: Buyers who want exact factory-identical electrical modules for reuse without any wiring changes or those unwilling to tackle a multi-hour installation should consider a dealer-supplied unit or professional installation alternatives.
- Complete assembled unit including motor and harness for one-step replacement
- Engineered to match factory fit and cooling performance
- Motor tested in laboratory settings for functional reliability
- Lower-cost alternative to dealership replacement parts
- Installation can be difficult in tight engine bays and may require removing battery or modules
- Aftermarket control module and connectors may not match the original and could need wiring changes
Verdict: A complete, factory-style cooling fan assembly that restores radiator cooling at a fraction of dealership cost.
2. labwork Radiator A/C Condenser Cooling Fan Assembly for Nissan Pathfinder / Infiniti QX60
| Compatible Models | Nissan Pathfinder 2013-2017; Infiniti QX60 2014-2019; Infiniti JX35 2013 |
|---|---|
| Power Connector Type | 3-Pin or 4-Pin |
| Noise Level | 40 Decibels |
| Maximum Rotational Speed | 2500 RPM |
This labwork cooling fan assembly is a direct-fit replacement designed for Nissan Pathfinder (2013–2017) and Infiniti QX60/JX35 (2013–2019) applications. It mounts in place of the original fan assembly to provide engine and A/C condenser cooling when the vehicle demands extra airflow at idle or during hot-weather driving. The unit includes a dual fan setup and a multi-pin connector option to match factory wiring harnesses and is built with metal components where needed. In practice the fan is straightforward to install and can restore lost cooling performance without replacing the entire shroud or radiator. Buyers report the price is attractive compared with dealer parts, but quality is mixed: some units fit and run quietly while others have shown early bearing failure, connector mismatches, or noisy operation. If you need a budget replacement to get your QX60 back on the road, this assembly can work, but expect to check fit and wiring before final installation and be mindful that longevity may vary compared with higher-end options.
Best for: Practical optimizers looking to fix a cooling or A/C airflow problem on a budget and willing to trade some brand-new longevity for a significantly lower purchase cost.
Less Ideal for: Owners who prioritize long-term durability and factory-level reliability or who want a guaranteed plug-and-play replacement without any fitment checks should consider higher-end branded assemblies or dealer parts instead.
- Direct-fit replacement for specified Pathfinder and Infiniti QX60/JX35 model years
- Includes fan assembly that restores radiator and A/C condenser airflow without replacing the radiator
- Offers a lower-cost alternative to dealer or premium aftermarket assemblies
- Available with 3- or 4-pin connector options to match common wiring harnesses
- Metal construction in key areas for improved durability compared with all-plastic units
- Reported variability in build quality leading to early failure or noisy bearings in some units
- Occasional connector or module fitment mismatch requiring small wiring or mounting adjustments
Verdict: An affordable, direct-fit cooling fan assembly that restores radiator and A/C airflow for Pathfinder and QX60 owners who want a budget-conscious repair.
3. PartsFlow Radiator and Condenser Cooling Fan (fits Infiniti QX60 / JX35 / Nissan Pathfinder)
| Compatible Devices | 2014-2019 Infiniti QX60, 2013 JX35, 2013-2018 Nissan Pathfinder |
|---|---|
| Power Connector Type | 3.5 |
| Cooling Method | Air |
| Noise Level | 0.1 Decibels |
This PartsFlow cooling fan assembly is an aftermarket replacement intended to swap into the radiator/condenser position on applicable Infiniti QX60, JX35 and Nissan Pathfinder models. It replaces the original fan motor and shroud assembly and connects into the factory harness for typical cooling and A/C condenser airflow duties. Notable features from the listing include a 3.5 power connector type and an air-cooling design that mirrors the factory arrangement, and several buyers report easy electrical compatibility and reduced noise after installation. As a budget option it delivers factory-style function at a fraction of dealer cost, though installation can be tight and may require drilling or minor trimming on some vehicles to line up control-module mounting points. Fitment is mixed in reviews so double-check the listed vehicle years and be prepared for modest installation work on some chassis. For DIY owners this is a cost-effective way to restore cooling performance, but expect variation in pre-drilled hole sizes and occasional need for extra fasteners or foam strips to prevent rattle.
Best for: Budget-conscious owners who prefer a DIY repair and prioritize value over a perfect plug-and-play dealer part for restoring radiator/condenser cooling function.
Less Ideal for: Buyers who want guaranteed factory-fit, bolt-on replacement with no modification or those uncomfortable with minor bodywork or custom mounting during installation.
- Direct replacement design intended for Infiniti QX60, JX35 and Nissan Pathfinder models listed
- Matches factory-style air cooling function and electrical connector for straightforward wiring
- Much lower cost than dealer replacement, offering significant savings for DIY repairs
- Several users report quieter operation and satisfactory fit after minor adjustments
- Fitment is not perfect for every vehicle; some units require drilling, trimming, or different screws to mount control module
- Does not include the separate control module in the listing which may be needed depending on your vehicle
Verdict: An affordable aftermarket fan assembly that restores radiator and condenser cooling performance on listed Infiniti QX60 and related models while saving substantially versus dealer replacement.
4. waltyotur Dual Radiator Fan Assembly with Control Module (Replacement for NI3115149)
| Applicable Models | Pathfinder 2013-2017, QX60 2014-2019, JX35 2013 |
|---|---|
| Power Connector Type | 4-Pin |
| Wattage | 6 watts |
| Cooling Method | Air, Convection |
This dual radiator fan assembly replaces the factory unit and includes the control module so it arrives as a ready-to-install system for Infiniti QX60 and related models. It is used to cool the radiator and assist A/C performance by providing variable-speed air flow controlled by the included module. Buyers report that the unit fits the mounting points, runs quietly, and simplifies installation because the fans come pre-mounted in the housing and the control box is included. The motor and copper components are presented as corrosion-resistant to help durability, and the 4-pin power connector matches the vehicle harness. Expect a practical cost saving compared with dealer parts, but be aware quality varies between units in customer reports: some users saw long service life while a few received early failures or shipping damage to the slim plastic housing. Installation can be done by a competent DIYer or mechanic but may be tight in the engine bay and occasionally requires reusing original fasteners for a correct fit.
Best for: Reliability-focused buyers who want a cost-effective, ready-to-install replacement to restore cooling and A/C function without sourcing a separate module or extensive fabrication.
Less Ideal for: Buyers seeking an OEM-branded part with guaranteed long-term warranty or those unwilling to risk variable third-party quality should consider dealer or factory-quality alternatives.
- Complete assembly with control module included so no separate module purchase is required
- Pre-mounted dual fans in housing simplify installation compared with piecemeal parts
- Fits stated Infiniti Pathfinder/QX60/JX35 model years and matches the factory 4-pin connector
- Multiple customers report quiet operation and improved A/C cycling compared with failed originals
- Some buyers reported early failures or inconsistent longevity across units
- Slim plastic housing ships with minimal padding and can be damaged in transit
Verdict: A budget-friendly, full fan assembly with control module included that restores radiator and A/C cooling for QX60/Pathfinder owners without needing extra parts.
5. Fekuar Dual Radiator and Condenser Fan Assembly (no motor)
| Power Connector Type | 3-Pin |
|---|---|
| Voltage | 12 Volts |
| Cooling Method | Air |
| Compatible Devices | Radiator |
This dual fan assembly replaces the factory cooling shroud and blades for compatible Nissan Pathfinder and Infiniti QX60/JX35 models and is intended for owners who need a ready-fit cooling assembly. It is supplied without the electric motors so you reuse the original motors or source replacements separately. The part is molded plastic with the factory-style mounting points and a 3-pin power connector specified by the listing, so installation is primarily a bolt-in job when motors and hardware match. Buyers report the unit fits well and restores radiator and A/C cooling performance, though installation can be tight and fiddly in the engine bay. Some users note intermittent vibration or noise after installation and a few arrival damage reports, so inspect the shroud and blade balance before fitting. The assembly offers a cost-effective alternative to dealer-sourced shrouds when you want a convenient, near-direct replacement, but it relies on correct motor compatibility and careful installation for quiet, long-term operation.
Best for: Convenience-driven buyers who want a near-direct replacement shroud that reduces parts sourcing and simplifies a radiator/condenser cooling repair for their Infiniti QX60.
Less Ideal for: Buyers who prefer an all-in-one replacement with new motors included or those who lack the patience or tools for a tight engine-bay installation should consider alternatives or professional installation.
- Direct-fit fan assembly with factory-style mounting points for listed models
- Supplied as a complete shroud and blades so you avoid sourcing multiple parts
- Plastic construction keeps weight and corrosion issues low
- 3-pin connector format matches common vehicle fan motor wiring
- Does not include electric motors so additional parts or reuse of original motors is required
- Some reviewers reported noise or vibration after installation
- A minority of buyers received damaged units on arrival, requiring inspection and possible return
Verdict: A cost-effective, near-direct fan shroud replacement for Infiniti QX60 owners seeking convenience, but you must supply or reuse the motors and check for fit and balance before installation.
6. PartsFlow Radiator and Condenser Cooling Fan with Control Module for Infiniti QX60 / Nissan Pathfinder Fitment
| Power Connector Type | 3-Pin or 4-Pin |
|---|---|
| Cooling Method | Air |
| Compatible Devices | Radiator |
| Number of Items | 1 |
This PartsFlow assembly combines the radiator and condenser fan with its control module to restore engine cooling and A/C performance on affected QX60 and Pathfinder models. It is built to match the factory mounting and electrical connections and is typically used as a direct replacement when the original fan or module fails, helping prevent overheating and poor A/C cooling at idle or in traffic. Notable features in the listing include a 3- or 4-pin power connector option and an integrated control module to simplify installation compared with sourcing separate parts. In practice the unit can save time during a repair when it fits correctly, but real-world feedback shows mixed durability: several buyers report long-term reliability while others experienced early control module or wiring failures and needed replacements. That means buyers should inspect connectors at installation and be prepared for possible warranty or merchant support steps if problems arise. Installation is straightforward for experienced DIYers or mechanics but results vary by vehicle and usage conditions.
Best for: Risk-averse mainstream buyers seeking a low-effort replacement that restores cooling and climate function without major modification; ideal for owners who want a factory-style swap and are cautious about part fitment and installation.
Less Ideal for: Buyers who prioritize long-term, trouble-free ownership above upfront cost should consider sourcing a factory-brand replacement or purchasing through a dealer instead.
- Designed as a direct replacement assembly combining fan and control module for simpler installation
- Fits listed Infiniti QX60 and Nissan Pathfinder model years indicated in the listing
- Offers 3-pin or 4-pin power connector compatibility for common harnesses
- Sold new and intended to restore radiator and condenser cooling and A/C performance
- Mixed user reports on long-term reliability of the control module and wiring
- Some units arrived with minor fitment or shroud damage requiring replacement or merchant support
Verdict: A single-piece replacement fan and control module built to restore cooling and A/C function on specified Infiniti QX60 and Pathfinder models.
Choosing the Right Infiniti QX60 Cooling Fan: Key Factors to Consider
Airflow Capacity
Airflow capacity determines how much heat the fan can move away from the radiator and engine components. Higher CFM (cubic feet per minute) ratings usually mean better cooling under load, which matters for towing, idle traffic, and hot climates.
Airflow at lower fan speeds is especially important because many temperature spikes occur when the vehicle is idling or creeping in traffic. Look for fans that provide strong airflow without needing to run at maximum speed constantly, since that reduces wear and energy draw.
Motor Reliability
The fan motor is the component most likely to fail, so its construction and thermal tolerance are critical. Motors rated for sustained operation at high temperatures and with sealed housings resist corrosion and overheating, which extends service life.
Consider motors that specify duty cycles or thermal protection features. A motor that can handle frequent start-stop cycles and prolonged runs will reduce the chance of sudden failure and associated overheating events.
Electrical Compatibility
Electrical compatibility covers connector type, wiring gauge, and whether the fan works with the vehicle's existing control modules. Mismatched connectors or insufficient wiring can cause poor performance or intermittent operation.
Confirm that the assembly matches the QX60's plug style and that any included relays or resistors meet the vehicle's electrical requirements. Proper compatibility simplifies installation and helps avoid issues like blown fuses or erratic fan behavior.
Mounting and Fitment
Correct mounting and precise fitment ensure the fan sits close to the radiator and maintains an effective airflow path. Poor fit can allow air to bypass the radiator or cause vibration and noise.
Look for assemblies designed to align with the QX60's mounting points and that include necessary brackets or fasteners. A fan that integrates with the shroud assembly helps keep ducting efficient and reduces installation time.
Noise and Vibration
Noise and vibration affect cabin comfort and can also indicate imbalance or poor construction. Fans designed with balanced blades and vibration-damping mounts run quieter and impose less stress on bearings.
Evaluate expected noise levels at different speeds if that information is available. Quieter fans may operate longer without drawing attention, but balance that benefit against cooling performance to ensure adequate thermal control.
Durability and Materials
Materials used for the blades, housing, and electrical components determine resistance to heat, corrosion, and impact. Reinforced plastics and treated metals last longer in the engine bay environment.
Durable assemblies often include sealed bearings, corrosion-resistant terminals, and UV-stable plastics. While tougher materials can add weight, they reduce the likelihood of cracks, warping, or electrical failures over time.
How We Chose the Best Infiniti QX60 Cooling Fan
We selected items that meet the specific needs of the Infiniti QX60 and that focus on core cooling performance, electrical durability, and fitment reliability. Our evaluation prioritized consistent airflow capacity at low and high speeds, motor lifespan and thermal tolerance, and the quality of the fan shroud interface that affects mounting and ducting efficiency. We also considered electrical connector compatibility, wiring harness robustness, and whether assemblies include necessary mounting hardware or sensors for a straightforward installation.Products were excluded if they lacked clear fitment information for the QX60, showed insufficient motor specifications, or had recurring reports of early electrical failure. We also set aside options that required significant vehicle modification to install. The final shortlist balances cooling effectiveness, installation practicality, and components that reduce the risk of premature failure.
Our full evaluation process is outlined in our review methodology.
FAQ
What are common cooling fan symptoms in an Infiniti QX60?
Common signs include the engine running hotter than normal, the cabin AC losing effectiveness at idle, or a fan that does not start when expected. You might also notice unusual noises or intermittent fan operation. These symptoms often indicate motor, electrical, or shroud issues that should be diagnosed promptly.
Can I replace the radiator fan myself on a QX60?
Many owners can perform a radiator fan replacement with basic hand tools and some mechanical comfort. The job usually requires disconnecting the battery, unplugging the electrical connector, and removing mounting fasteners. If you are unsure about electrical connections or fitment, consult a repair manual or a professional.
How do I know if the cooling fan motor has failed?
A failed motor often results in no fan operation under conditions where it should run, or the fan may only work sporadically. You can check for power at the connector with the vehicle in the correct state; if power is present and the fan does not spin, the motor is likely faulty. Intermittent function or grinding noises also suggest motor wear.
Does a fan shroud assembly matter for cooling performance?
Yes. The fan shroud assembly helps direct airflow through the radiator rather than letting air bypass around the fan. Proper shroud fitment improves cooling efficiency and reduces the need for the fan to run at high speed. A damaged or ill-fitting shroud can noticeably reduce thermal performance.
Will an electric cooling fan draw too much power from my QX60?
Electric cooling fans are designed to work within vehicle electrical system limits. Higher-output fans do draw more current, but when properly matched to the vehicle they should not overload the system. Ensuring correct wiring, relays, and fuse ratings helps prevent electrical strain.
What should I check before buying a replacement fan?
Confirm physical fitment with the QX60 mounting points, verify the electrical connector type, and review motor duty ratings and expected airflow. Also inspect whether the assembly includes necessary hardware and whether the shroud interfaces cleanly with the radiator to avoid installation surprises.
Conclusion
When choosing an Infiniti QX60 cooling fan, prioritize consistent airflow and a reliable motor while ensuring correct electrical and mounting compatibility. These factors most directly affect cooling efficiency, longevity, and the likelihood of intermittent failures.Balance noise and durability against cooling capacity based on how you use the vehicle. For stop-and-go driving and hot climates, favor airflow and motor thermal tolerance; for everyday street use, fitment and quiet operation may be higher priorities.
Explore More:
- Check out all Infiniti QX60 parts & accessories
- Explore Cooling Fans Maintenance & Repair Guides
- Explore Cooling System
- Browse all Auto Parts
