Note: This article contains affiliate links. If you click on these links and make a purchase, I may earn a small commission at no extra cost to you. This helps support my research and content. Read my full affiliate disclosure here.
Replacing worn rotors can restore consistent pedal feel, reduce brake vibration, and improve stopping reliability on your Infiniti FX35. Choosing the right rotors matters because rotor construction, material, and thermal performance directly affect braking comfort, longevity, and safety.This guide presents the six shortlisted rotors that meet our editorial criteria. We evaluated each option for build quality, heat management, and fitment to make it straightforward to pick the right replacement for your FX35. Read on to see the factors we prioritized before the product list.
Looking for other parts? See all Infiniti FX35 parts & accessories.
Top Picks at a Glance
| Best Reviewed A top-rated pick with lots of positive feedback | PowerStop Rear Brake Kit (Z17 Ceramic Pads & OE Replacement Rotors) — KOE2427 |  |
| Best Quality Built to a higher standard if you want something more solid | Detroit Axle Drilled & Slotted Brake Kit with Ceramic Pads for Infiniti FX35 |  |
| Best Budget The cheapest option that still gets the job done reliably | funire Rear Drilled & Slotted Brake Rotor and Ceramic Pad Kit (Rear) |  |
| Most Sold A high-volume bestseller chosen again and again | PowerStop Z17 Front Brake Kit with Ceramic Pads and OE Replacement Rotors (KOE5264) | |
| Best Value for Money The sweet spot between price and what you get | Detroit Axle Rear Drilled & Slotted Brake Kit with Ceramic Pads for Infiniti FX35 |  |
| Best Overall The best all-around choice for most situations | Detroit Axle Front Drilled & Slotted Brake Kit with Ceramic Pads for INFINITI FX35/FX37/FX45/QX70 | |
1. PowerStop Rear Brake Kit (Z17 Ceramic Pads & OE Replacement Rotors) — KOE2427
| Vehicle Service Type | Car, Truck, Van |
|---|---|
| Automotive Fit Type | Vehicle Specific Fit |
| Position | Rear |
| Exterior | Milled |
This PowerStop rear brake kit supplies everything needed to replace the rear brakes on supported Infiniti FX35/Fx45 and related Nissan models. It pairs Z17 ceramic pads with OE-style replacement rotors, plus stainless-steel installation clips and hardware so the swap is a straight bolt-on job for a DIYer or shop. The ceramic Z17 pads are low-dust, chamfered and slotted for quicker break-in and quieter daily driving, while the mill-balanced rotors aim to preserve pedal feel and reduce vibration. Practical benefits include reduced wheel dust, included hardware to avoid sourcing parts separately, and a kit designed to match factory-fitment for the listed vehicles. Limitations to note are mixed long-term wear reports from some users and surface corrosion on rotor faces in humid environments if left unpainted; heavy-duty or track use will push these beyond their intended daily-driving design. Installation is typical of rear brake jobs and does not require modifications.
Best for: Reliability-focused buyers who prioritize a dependable, low-dust daily-driving replacement and want a single kit that simplifies maintenance and installation.
Less Ideal for: Drivers who regularly push brakes hard on track days or need heavy-duty, high-temperature performance should choose a performance-oriented or heavy-duty brake kit instead.
- Complete kit includes pads, rotors, stainless-steel hardware and shims for a single-purchase install
- Z17 ceramic pads run low dust and are engineered for quiet, dependable daily driving
- Rotors are mill-balanced and precision milled to reduce vibration and preserve pedal feel
- Some users report faster-than-expected wear on rotors or pads under heavier use
- Rotors can show surface rust quickly in humid or salty environments if left uncoated
Verdict A practical, all-in-one rear replacement kit that delivers quiet, low-dust daily-driving performance for Infiniti FX35 owners but is not aimed at heavy track use.
2. Detroit Axle Drilled & Slotted Brake Kit with Ceramic Pads for Infiniti FX35
| Fitment | 2005-2008, 2011-2012 Infiniti FX35 (built after 11/2005); 2013 FX37; 2005-2008 FX45 (built after 11/2005); 2014 QX70 (3.7L; built before 9/2013) |
|---|---|
| Contents | 2 front drilled & slotted rotors, 2 rear drilled & slotted rotors, front and rear ceramic pads, brake cleaner and fluid |
| Exterior | Zinc |
| Manufacturer | Detroit Axle |
This Detroit Axle brake kit supplies drilled and slotted front and rear rotors plus matching ceramic pads and basic consumables to replace the factory brake system on an Infiniti FX35. It is intended for a bolt‑in replacement and includes rotors, front and rear pads, brake cleaner and fluid so you can complete a full brake job without sourcing extra parts. The drilled and slotted rotors help dissipate heat and resist fade during repeated hard stops while the ceramic pads deliver confident bite with relatively low dust. Users report accurate fitment and straightforward installation when the included hardware is correctly installed, though a few buyers replaced the supplied small hardware clips to avoid rubbing. For performance-minded owners this kit offers improved cooling and stopping feel compared with worn stock components, but it is an aftermarket option rather than a race-oriented setup so extreme track use may reveal limits in heat capacity and longevity compared with dedicated high‑performance rotors.
Best for: Performance-oriented Infiniti FX35 owners who prioritize stronger, cooler braking and a factory-style replacement that upgrades stopping feel without moving to track-spec hardware.
Less Ideal for: Drivers seeking an aggressive motorsport or track-only braking package should consider purpose-built performance rotors and pads instead.
- Includes both front and rear drilled and slotted rotors and ceramic pads for a complete axle-to-axle replacement
- Drilled and slotted rotor design improves heat dissipation and helps reduce brake fade under repeated hard stops
- Ceramic pads provide strong initial bite with reduced dust compared to many semi-metallic pads
- Kit ships with brake cleaner and fluid so you can finish a full install without sourcing extra consumables
- Included brake hardware may not fit perfectly on every vehicle and some users replaced it to avoid rotor contact
- Not engineered as a dedicated track or motorsport rotor, so extreme repeated high-heat use could exceed its performance envelope
Verdict A comprehensive bolt‑in kit that gives an Infiniti FX35 noticeably cooler, firmer braking than worn stock parts while remaining a street-oriented aftermarket upgrade.
3. funire Rear Drilled & Slotted Brake Rotor and Ceramic Pad Kit (Rear)
| Set Name | Disc Brake Kit (6 pieces) |
|---|---|
| Position | Rear |
| Model | drilled slotted brake kits |
| Vehicle Service Type | Car |
This funire rear brake kit supplies two drilled and slotted rotors plus four ceramic pads and hardware for a direct replacement on the Infiniti FX35. Designed as a vehicle-specific fit, the rotors use a Geomet anti-rust coating that aims to resist corrosion and salt spray while the drilled and slotted faces help dissipate heat and reduce pad glazing during spirited or towing use. Ceramic pads typically run quieter and produce less dust than semi-metallic pads, so daily driving stays cleaner. Installation is straightforward for a competent DIYer or a shop because the kit includes pads, rotors, and mounting hardware. The main compromises are that this is an aftermarket budget option rather than a factory-brand part and performance under very heavy track use may not match premium performance rotors and race pads. For owners who want improved cooling and lower dust at a modest cost, this kit delivers sensible braking upgrades without an expensive brand-name premium.
Best for: Practical, budget-conscious Infiniti owners who prioritize lower cost and cleaner daily driving while keeping brakes refreshed with a direct-fit replacement.
Less Ideal for: Drivers who need track-grade stopping performance or who prefer brand-name, high-end performance rotors and pads should consider higher-tier options instead.
- Complete rear kit includes both rotors and pads plus hardware for easier installation.
- Drilled and slotted rotor faces improve heat dissipation and help evacuate gases and water.
- Geomet anti-rust coating offers extended corrosion resistance for longer service life.
- Ceramic brake pads run quieter and produce less brake dust compared with many semi-metallic pads.
- Aftermarket budget product so long-term durability and extreme-performance stopping power may be below premium factory-quality options.
- Kit coverage is limited to rear brakes only, so front components must be purchased separately if needed.
Verdict A cost-conscious, direct-fit rear rotor and ceramic pad kit that improves cooling and reduces dust but is aimed at everyday driving rather than extreme performance.
4. PowerStop Z17 Front Brake Kit with Ceramic Pads and OE Replacement Rotors (KOE5264)
| Position | Front |
|---|---|
| Includes | Ceramic brake pads, replacement rotors, shims, hardware |
| Fitment | Infiniti FX35/FX37/FX45/QX70 front applications |
| Pad Formula | Z17 Ceramic |
This PowerStop Z17 front brake kit is built as a direct replacement for compatible Infiniti FX models and bundles ceramic Z17 pads, two mill-balanced replacement rotors, rubberized shims, and stainless-steel installation hardware for a bolt-on install. The Z17 ceramic pads are marketed for daily driving with low dust, chamfers, and slots that help fast break-in, quiet operation, and cleaner wheels compared with semi-metallic pads. The included rotors are precision milled to reduce vibration and deliver a smooth pedal feel after installation. Because the kit is sold as a complete front axle replacement, it simplifies a routine brake refresh and reduces the need to source parts separately. Limitations to note are that the hardware supplied has been reported in some cases to be a poor fit, so verify compatibility during install, and ceramic pads typically offer less initial bite than performance compounds under heavy track use. This kit is best for owners seeking a quiet, low-dust daily-driver replacement that matches factory fitment without major modifications.
Best for: Risk-averse mainstream buyers who want a reliable, factory-style front brake replacement for daily-driven Infiniti FX models and prefer a straightforward, low-maintenance upgrade.
Less Ideal for: Drivers who frequently do high-speed track sessions or demand aggressive, high-temperature friction should consider performance-oriented pad compounds and rotors instead.
- Complete front kit bundles pads, rotors, shims, and stainless installation hardware for a single purchase and easier install
- Low-dust Z17 ceramic compound keeps wheels cleaner and reduces brake dust buildup
- Precision milled, mill-balanced rotors improve pedal feel and reduce vibration after install
- Some customers report the supplied installation hardware does not fit perfectly and may need replacement
- Ceramic pads prioritize quiet and low dust over aggressive initial bite for high-performance driving
Verdict A convenient, factory-style front brake replacement that favors quiet, low-dust daily driving but may require aftermarket hardware for fitment in some installations.
5. Detroit Axle Rear Drilled & Slotted Brake Kit with Ceramic Pads for Infiniti FX35
| Measurement | 12.13" inch (308mm) Rear Rotors |
|---|---|
| Kit includes | 2x Rear Drilled & Slotted Rotors, 2x Rear Ceramic Pads, Brake Cleaner & Fluid |
| Brand | Detroit Axle |
This Detroit Axle rear brake kit is a complete replacement package for Infiniti FX35 models that use 12.13-inch rear rotors. It includes two drilled and slotted rear rotors, two ceramic brake pads and small bottles of brake cleaner and fluid, so you have the main parts needed for a typical rear brake job. The drilled and slotted rotors help with heat dissipation and debris clearing, while the ceramic pads aim for quieter operation and less dust than semi-metallic compounds. For a DIY install or a shop doing a routine rear brake service on an FX35, the kit reduces parts-sourcing time because it supplies matched components and some hardware. Expect a noticeable improvement over worn originals in stopping smoothness and reduced vibration when the correct rotor diameter is confirmed. Limitations include the requirement that your FX35 has the 12.13-inch rear rotor specification and the usual break-in period for new pads and rotors; buyers should also verify included hardware matches their specific trim level before installation.
Best for: Practical optimizers who prioritize getting a matched, ready-to-install rear brake package that balances cost and performance for routine maintenance on an Infiniti FX35.
Less Ideal for: Drivers seeking high-performance track braking upgrades or those who need multi-vehicle compatibility should consider specialized performance rotors or vehicle-specific options instead.
- Complete rear kit includes matched drilled-and-slotted rotors and ceramic pads for a single purchase
- Drilled and slotted rotor design improves heat dissipation and helps reduce rotor glazing under repeated braking
- Ceramic pads produce less dust and tend to be quieter than many semi-metallic pads
- Includes basic brake cleaner and fluid so installers have starter supplies during the job
- Only fits FX35 rear assemblies with 12.13-inch (308 mm) rotor diameter so fitment must be confirmed
- Drilled and slotted surface can increase potential for pad wear compared with plain rotors depending on driving style
Verdict A budget-conscious, all-in-one rear brake replacement for Infiniti FX35 owners with 12.13" rotors who want OEM-style fit and reduced dust without buying parts separately.
6. Detroit Axle Front Drilled & Slotted Brake Kit with Ceramic Pads for INFINITI FX35/FX37/FX45/QX70
| Fitment | 2005-2014 Infiniti FX35/FX37/FX45/QX70 (specified years) |
|---|---|
| Kit contents | 2 front drilled & slotted rotors, 2 front ceramic pads, hardware, cleaner and fluid |
| Pad material | 100% ceramic |
| Rotor finish | Zinc dichromate plating |
This Detroit Axle front brake kit replaces the front rotors and pads on compatible Infiniti FX models and is intended for direct-fit, routine brake service. The kit includes two drilled and slotted rotors with zinc plating for corrosion resistance, 100 percent ceramic front pads, installation hardware, and brake cleaner and fluid. Drilled and slotted rotors help evacuate heat and gases for firmer stopping under repeated use, while the ceramic pads are formulated to minimize metallic content and reduce dust and noise compared with semi-metallic compounds. The package arrives ready to install and includes the small items technicians usually need, which speeds a standard service. Expect improved pedal feel and reduced rotor vibration compared with worn originals, though drilled rotors can attract more road grime over time and ceramic pads can be less effective than aggressive compounds under extreme track use. This kit is a practical upgrade for everyday driving and spirited road use on Infiniti FX models when you want a cleaner braking feel without moving to heavy-duty racing materials.
Best for: Balanced owners who want a reliable, factory-quality replacement that improves everyday braking feel and reduces dust and noise without stepping into track-focused parts.
Less Ideal for: Drivers who need race-level stopping power or who frequently subject brakes to extreme track conditions should choose a performance rotor and pad combination instead.
- Drilled and slotted rotors improve heat dissipation and help reduce brake fade during repeated stops
- Zinc dichromate plating on rotors offers corrosion resistance for longer surface life
- 100 percent ceramic brake pads produce less dust and generally quieter operation than metallic pads
- Includes installation hardware plus brake cleaner and fluid so you have the common items needed for a front brake job
- Drilled rotors can collect road debris and may be more prone to cracking under extreme track stress
- Ceramic pads sacrifice some high-temperature bite compared with aggressive performance compounds
Verdict A well-rounded, ready-to-install front brake kit for Infiniti FX models that balances quieter ceramic pads with drilled and slotted rotors for improved everyday stopping performance.
Choosing the Right Infiniti FX35 Brake Rotors: Key Factors to Consider
Material and Casting Quality
Rotor material and casting integrity determine strength and resistance to thermal cracking. Higher-grade cast iron and controlled manufacturing reduce porosity and hotspots that can lead to early failure.
A consistent, high-quality casting also affects machining tolerances and surface finish, which are important for even pad contact and steady stopping power. Inferior castings may warp sooner and transfer noise or vibration to the pedal.
Thermal Management and Heat Dissipation
How a rotor handles heat affects fade resistance and service life. Rotors designed with enhanced thermal pathways, ventilation channels, or directional vanes move heat away from the braking surface faster, preserving friction material effectiveness during repeated heavy stops.
If you drive in conditions that involve towing, steep grades, or spirited driving, prioritize rotors with better heat dissipation to reduce the chance of glazing or uneven wear.
Rotor Surface Design
The braking surface—plain, slotted, or drilled—changes pad bedding, debris evacuation, and noise characteristics. Slotted faces help clear gas and material from the pad interface, maintaining bite and reducing glazing. Drilled faces can aid in cooling but may introduce stress points under extreme thermal cycling.
Consider the surface that best matches your driving style and the type of brake pads you plan to use, since aggressive designs can accelerate pad wear if the materials are mismatched.
Dimensional Accuracy and Runout
Accurate diameter, thickness, and mounting hole tolerances ensure the rotor seats true and spins without wobble. Excessive lateral runout or nonuniform thickness results in pedal pulsation and uneven pad wear.
Check that the rotor matches the Infiniti FX35 factory dimensions and that machining processes control runout. Precision in these areas reduces the risk of vibration complaints after installation.
Corrosion Protection and Coatings
Protective coatings on non-friction surfaces slow rust and make the rotors easier to service long term. Zinc or ceramic coatings on the hat and hat-to-bell areas extend visual life and prevent seizure at mounting points.
While coatings do not affect the braking surface, they reduce maintenance hassles and retain clearer fitment tolerances in corrosive climates.
Serviceability and Compatibility
Ease of installation and compatibility with the Infiniti FX35 bolt pattern and hub dimensions matters for a smooth replacement. Rotors that align with common service practices avoid the need for extra machining or adapters.
Also consider whether the rotor is designed to work with commonly used brake pads and if it supports conventional resurfacing techniques, in case you choose to refresh a rotor instead of replacing it in the future.
FAQ
How do I know when my Infiniti FX35 brake rotors need replacing?
Common indicators include a pulsating brake pedal, visible grooves or scoring on the rotor surface, and increased stopping distances. Light surface rust is normal, but deep rust at the friction surface or a rotor that measures below minimum thickness are signs replacement is needed. If you notice vibration especially under braking, have the rotors measured and inspected.
Can rotors be resurfaced instead of replaced on an Infiniti FX35?
Resurfacing can be suitable when rotors have minor scoring and remain above the minimum thickness specification. Resurfacing restores a smooth contact surface and can extend service life, but it reduces thickness which affects heat capacity. Rotors with heavy cracking, severe wear, or below-spec thickness should be replaced rather than resurfaced.
What is the difference between slotted and drilled rotors for an Infiniti FX35?
Slotted rotors help clear brake pad debris and maintain consistent pad contact, which often improves bite and reduces glazing. Drilled rotors provide additional pathways for heat and gas escape but can create stress concentrations that may not be ideal under repeated heavy thermal cycling. Choice depends on driving conditions and pad material compatibility.
How do I measure rotor thickness on my Infiniti FX35?
Use a micrometer or caliper at multiple points around the rotor friction surface to get an accurate average thickness reading. Compare measurements to the vehicle manufacturer’s minimum thickness specification. If measurements approach or fall below that limit, replacement is recommended to maintain safe braking performance.
Will upgraded rotors reduce brake noise and vibration?
Upgraded rotors with better machining tolerances, improved ventilation, and appropriate surface design can reduce noise and vibration in many cases. However, overall results also depend on pad selection, caliper condition, and installation quality. Ensuring correct fit and pairing with compatible pads is important for the best outcome.
How We Chose the Best Infiniti FX35 Brake Rotors
Our selection focused on rotor options that balance durability, thermal performance, and correct fitment for the Infiniti FX35. We prioritized rotor material and casting quality, braking surface finish, thermal capacity and heat dissipation features, precise OEM-equivalent dimensions and mounting tolerances, and corrosion protection for long-term use. We also assessed machining tolerances and runout control because these affect pedal feel and vibration. Additional considerations included whether the rotor design supports straightforward installation and whether the rotor surface accommodates common pad materials.We excluded rotors with unclear fitment specifications, nonstandard mounting patterns, or lacking documented manufacturing tolerances. Cheap, unspecified imports and parts without clear specification sheets were not considered. The final list emphasizes rotors that meet measurable engineering criteria relevant to braking performance and longevity for the Infiniti FX35.
Our full evaluation process is outlined in our review methodology.
Conclusion
When choosing rotors for an Infiniti FX35, prioritize material quality, dimensional accuracy, and thermal management to maintain consistent stopping power and minimize vibration. Match the rotor surface design to your driving habits and the pad material you plan to use.Remember that resurfacing is an option only when the rotor meets thickness and structural standards. Favor rotors with clear fitment specifications and protective coatings to ensure long-term serviceability and reliable braking performance.
Explore More:
- Check out all Infiniti FX35 parts & accessories
- Explore Brake Rotors Maintenance & Repair Guides
- Explore Brake System
- Browse all Auto Parts
