Note: This article contains affiliate links. If you click on these links and make a purchase, I may earn a small commission at no extra cost to you. This helps support my research and content. Read my full affiliate disclosure here.
Choosing the right brake calipers for your Infiniti Q50 affects how the car stops, how the braking system wears, and how often you need maintenance. The wrong caliper can lead to uneven pad wear, reduced braking confidence, or more frequent repairs. This guide highlights seven shortlisted options for Infiniti Q50 brake calipers that meet strict fitment and build standards. We evaluated each pick on fitment accuracy, materials and corrosion protection, and easy installation to help you pick the right unit for your driving needs.
Looking for other parts? See all Infiniti Q50 parts & accessories.
Top Picks at a Glance
| Best Reviewed A top-rated pick with lots of positive feedback | A-Premium Rear Right Disc Brake Caliper Assembly for Infiniti Q50 |  |
| Most Popular A crowd favorite that many people choose with confidence | TRQ Rear Driver and Passenger Side Brake Caliper Set (pair) |  |
| Best Quality Built to a higher standard if you want something more solid | A-Premium Disc Brake Caliper Assembly — Front Side, compatible with Infiniti Q50/Q60/Q70 and select Nissan models |  |
| Best Budget The cheapest option that still gets the job done reliably | AutoShack Rear Brake Calipers (pair) |  |
| Most Sold A high-volume bestseller chosen again and again | TRQ Performance Front and Rear Brake Caliper Set (direct-fit) |  |
| Best Value for Money The sweet spot between price and what you get | Detroit Axle Rear Disc Calipers and Ceramic Brake Pads Kit (4pc) for Infiniti Q50/Q60/Q70 |  |
| Best Overall The best all-around choice for most situations | Detroit Axle Rear Brake Kit with Rotors, Ceramic Pads and Calipers for Infiniti Q50 (rear) |  |
1. A-Premium Rear Right Disc Brake Caliper Assembly for Infiniti Q50
| Vehicle fitment | Infiniti Q50 (listed compatible years) |
|---|---|
| Piston count | 2 Pistons |
| Inlet port size | M10 x 1.0 |
| Bleeder port size | M10 x 1.0 |
This A-Premium rear right caliper is a factory-replacement style assembly intended to replace the passenger-side rear caliper on Infiniti Q50 models. It arrives as a complete unit with metal pistons and installation hardware, so installation is usually limited to bolt-on fitment and bleeding of the system. The caliper uses two pistons and M10 x 1.0 inlet and bleeder ports and is finished with an anti-rust coating to resist corrosion over time. In practice this means you get a ready-to-install part that restores braking function without needing to transfer components from the old caliper. Buyers report close-to-factory fit and solid stopping performance when paired with quality pads and braided lines, though some users have noted fitment checks are prudent before painting or finishing. The manufacturer backs the part with a one-year unlimited-mileage guarantee, but as with any aftermarket caliper you should verify fitment for the Q50 and confirm mounting threads and brake line connections before finalizing installation.
Best for: Reliability-focused buyers who want a ready-to-install, factory-style rear caliper for routine maintenance or restoring braking performance on an Infiniti Q50.
Less Ideal for: Buyers seeking a full performance brake upgrade or a complete front-and-rear kit should consider multi-piece performance calipers or matched kits instead.
- Complete assembly includes caliper, metal pistons, and installation hardware for a faster swap
- Two-piston design provides predictable rear braking force for road use
- M10 x 1.0 inlet and bleeder ports match common factory brake hose and bleeding fittings
- Anti-rust coating helps extend service life in corrosive conditions
- Accessory may require a fitment check on some Q50 submodels due to mounting thread variance
- Does not include brake pads so additional purchases are required
Verdict A practical, ready-to-install rear caliper for Infiniti Q50 owners who prioritize reliable, factory-style replacement over a performance overhaul.
2. TRQ Rear Driver and Passenger Side Brake Caliper Set (pair)
| Model | TRQ CLA32272 2 Piece Brake Caliper Set |
|---|---|
| Exterior | Machined |
| Zinc Coated | Long lasting rust prevention |
| EPDM Seals | Enhanced resistance to thermal deterioration |
| Package | Includes driver and passenger rear calipers with hardware and abutment kit |
This TRQ rear caliper kit supplies both driver and passenger side units as a direct-fit replacement for compatible vehicles, engineered for straightforward, DIY-friendly installation. The calipers come pre-assembled with hardware and abutment kit included, so you can replace sticking or worn rear calipers and complete the repair in a single purchase. Zinc coating and EPDM seals aim to resist corrosion and thermal deterioration, which helps longevity in mixed weather and stop-and-go driving. TRQ also provides installation videos to guide owners through bleeding and fitment, which is handy for a convenience-minded buyer. Expect solid stopping power and a factory-quality fit when the parts match. Limitations to note are occasional reports of piston stiffness on some units and the need to properly bleed the system after installation; those problems can require extra troubleshooting or professional help. This kit does not include brake pads or rotors, so plan to reuse or replace those separately if needed.
Best for: Convenience-driven buyers who prioritize a quick, single-purchase repair solution and prefer parts that are ready to install with video guidance and included hardware.
Less Ideal for: Those seeking a full brake overhaul in one kit or who prefer pre-bedded performance components should consider options that include pads and rotors or higher-end performance calipers.
- Direct-fit, pre-assembled pair simplifies rear caliper replacement and reduces install time.
- Includes hardware and abutment kit so you can complete the repair without sourcing extra parts.
- Zinc coating and EPDM seals improve corrosion and heat resistance for longer service life.
- Access to step-by-step installation videos makes DIY bleeding and installation easier.
- Brake pads and rotors are not included so additional parts may be required to finish a full brake job.
- Some user reports indicate occasional piston stiffness that can need extra troubleshooting or replacement.
Verdict A convenient, direct-fit rear caliper pair that gets you back on the road quickly, but you may need separate pads or attention if a piston is stiff.
3. A-Premium Disc Brake Caliper Assembly — Front Side, compatible with Infiniti Q50/Q60/Q70 and select Nissan models
| Manufacturer Part Number | APBC0916PC |
|---|---|
| OEM Part Number Reference | 196232, 19-6232, 410111EA0A, 410111EA1B, 410111EA4A, 41011JL00A, 41011JL02A, 196233, 19-6233, 410011EA0A, 410011EA1B, 410011EA4A, 41001JL00A, 41001JL02A |
| Vehicle Fitment (high-level) | Infiniti Q50, Q60, Q70/Q70L (selected years and trims) |
This A-Premium front caliper assembly is a factory-replacement style unit intended to upgrade braking on select Infiniti models, notably Q50 (2014–2023 sport and Red Sport trims), Q60 (2014–2022 sport/Red Sport trims) and Q70/Q70L variants. It installs in place of the factory unit and is commonly used when rebuilding a braking system after pad or rotor replacement or when fitting a four-piston upgrade. Notable features include full caliper casting for multi-piston braking performance and parts keyed to vehicle-specific reference numbers for fitment. In practice the caliper delivers stronger clamping force and improved pedal feel compared with some single-piston stock units, and owners report solid stopping power once paired with quality pads and braided lines. Expect some fitment nuances on certain chassis variants that may require checking mounting hole threads and rotor coverage before final installation. The manufacturer offers a one-year unlimited-mileage guarantee, but buyers should verify vehicle-specific fitment and be prepared to address minor alignment or bracket differences during installation.
Best for: Performance-oriented Infiniti owners who prioritize stronger, more consistent braking and are comfortable verifying fitment and doing a hands-on installation.
Less Ideal for: Buyers seeking a simple plug-and-play cosmetic upgrade without checking fitment differences or those who want a calibrated, bolt-on big-brake kit backed by an OEM performance parts dealer.
- Designed as a direct factory-replacement for specified Infiniti front applications
- Multi-piston caliper design increases clamping force and braking responsiveness
- Ships as a complete caliper assembly ready to mount, reducing rebuild steps
- Some users report occasional issues with mounting hole threads requiring inspection or re-tapping
- May not fully contact rotor face on every Q50/Q60 chassis without matching hub/bracket changes
- Painted finish may require prep before final appearance matches factory look
Verdict A practical, performance-focused caliper replacement for Infiniti Q50/Q60/Q70 owners who want stronger braking but will verify fitment and handle minor installation adjustments.
4. AutoShack Rear Brake Calipers (pair)
| Piston count | 1 |
|---|---|
| Piston size | 1.68 inch (42.75 mm) |
| Bleeder port size | M7 x 1.0 |
| Inlet port size | M10 x 1.0 |
These AutoShack rear brake calipers are sold as a two-piece set intended to restore rear braking on compatible vehicles. They are zinc plated to resist surface rust and are manufactured to industry quality standards for a direct-fit factory replacement that accepts a single piston and standard bleeder and inlet fittings. In practice you would replace leaking or seized rear calipers with this set during a brake job to recover even braking and pedal feel. The calipers include common M7 bleeder and M10 inlet thread sizes and a 42.75 mm piston, which makes them straightforward to bench-bleed and install when combined with factory mounting hardware. Hardware and brake pads are not included so plan to reuse or replace brackets, guide pins, and pads separately. The product is backed by a short six-month warranty and the manufacturer recommends professional installation. If you want a lower-cost, no-frills rear caliper replacement that looks factory-style and resists corrosion, this is a practical option; budget buyers should expect to supply any missing hardware and pay for professional installation if they cannot do the job themselves.
Best for: Budget-conscious Infiniti Q50 owners focused on replacing worn or leaking rear calipers with an affordable, factory-style direct replacement to restore braking performance.
Less Ideal for: Buyers seeking a complete hardware and pad-included brake kit or an upgraded performance caliper should consider more comprehensive or performance-oriented options.
- Sold as a matched pair for rear axle replacement
- Zinc plating provides basic corrosion resistance and a factory-style appearance
- Manufactured to ISO/IATF 16949 standards for consistent fit and dimensions
- Common bleeder and inlet thread sizes that match typical Infiniti brake lines
- Does not include mounting hardware or brake pads so additional parts may be required
- Six-month warranty is relatively short compared with longer coverage from some competitors
Verdict A cost-effective, factory-style rear caliper pair for Infiniti Q50 owners who need an affordable direct replacement but are prepared to supply hardware and pads separately.
5. TRQ Performance Front and Rear Brake Caliper Set (direct-fit)
| Manufacturer | TRQ |
|---|---|
| Model | TRQ CLA82749 Brake Caliper Set |
| Exterior | Machined |
| Seals | High-Temperature EPDM |
| Finish | Electrostatic high-heat powder coating |
This TRQ caliper kit provides four direct-fit replacement calipers intended to swap in where factory units wear out. It is built with machined exterior surfaces, high-temperature EPDM seals and boots to resist thermal deterioration, and an electrostatic high-heat powder coat to help reduce rust and corrosion. The set is marketed as pre-assembled for easier installation and includes mounting hardware so the calipers align with factory mounting points and can be bled to a firm pedal without modification. For everyday drivers the practical benefits are straightforward: easier installation than rebuilding old calipers, reduced risk of early seal failure, and a corrosion-resistant finish that holds up in wet climates. Limitations to note are that this is a direct replacement caliper set without pads or rotors, so you must have compatible pads and rotors on hand, and fitment must be confirmed for your Infiniti Q50 before purchase because wheel and rotor size variations can affect compatibility.
Best for: Risk-averse mainstream Infiniti Q50 buyers who prioritize a reliable, factory-style replacement and prefer parts that minimize installation guesswork and return visits to the shop.
Less Ideal for: Drivers seeking a full performance upgrade package with larger rotors or matched high-performance pads and hats should consider a dedicated performance brake kit rather than this direct-fit replacement set.
- Direct-fit, pre-assembled front and rear caliper set for straightforward replacement
- High-temperature EPDM seals designed to resist thermal degradation
- Electrostatic high-heat powder coat to reduce rust and corrosion
- Includes mounting hardware and installation resources to simplify DIY replacement
- Does not include brake pads or rotors so additional parts are required
- Fit depends on your Q50's wheel and rotor configuration and must be verified before installation
Verdict A practical, corrosion-resistant direct-fit caliper set for Infiniti Q50 owners who want a reliable factory-style replacement but not a full performance overhaul.
6. Detroit Axle Rear Disc Calipers and Ceramic Brake Pads Kit (4pc) for Infiniti Q50/Q60/Q70
| Kit contents | 2x Rear Calipers + 2x Rear Ceramic Brake Pads |
|---|---|
| Piston size | 1.68 in. / 42.75 mm |
| Piston material | Steel |
| Piston quantity | 1 |
This Detroit Axle kit replaces both rear disc calipers and includes rear ceramic pads plus mounting hardware, aimed at a full caliper-and-pad service for compatible Infiniti models. Installation is typical for a rear brake job: remove the old caliper, install the bracketed caliper, fit the ceramic pads and hardware, then bleed the system. Notable features are factory-spec caliper construction with steel pistons and a single-piston design, included brackets and hardware, and pads pre-matched to the calipers which simplifies parts sourcing. In practice the kit delivers solid, OEM-style braking for everyday driving and city/highway use, and reviewers note good fitment and a durable finish on the calipers. Limitations are that the pads are aimed at quiet, general-purpose braking rather than aggressive performance braking, and some hardware pieces may require sorting during install. The kit’s 10-year warranty and matched components make it a convenient, value-focused option for routine rear brake replacement on the specified Infiniti models.
Best for: A practical optimizer who wants a matched, ready-to-install rear brake kit that restores factory-style braking on an Infiniti Q50 with minimal parts sourcing and reasonable long-term value.
Less Ideal for: Drivers seeking high-performance or track-capable braking should choose specialty performance pads and calipers instead.
- Complete rear kit includes calipers, ceramic pads and mounting hardware for a single service
- Calipers built to factory-spec with steel pistons for leak-free performance
- Matched pads and hardware reduce parts compatibility guesswork during replacement
- Durable caliper finish holds up in road conditions according to user reports
- Ceramic pads provide OEM-level bite but are not suited for aggressive or track use
- Some individual hardware pieces are packaged separately and may require extra sorting during installation
Verdict A matched, value-oriented rear caliper and pad kit that restores reliable, factory-style braking on compatible Infiniti Q50 models without premium performance pretensions.
7. Detroit Axle Rear Brake Kit with Rotors, Ceramic Pads and Calipers for Infiniti Q50 (rear)
| Manufacturer | Detroit Axle |
|---|---|
| Measurement | 12.13" rear rotors |
| Fitment | Rear brake kit for Infiniti Q50 (rear) |
| Kit contents | 2 rotors, 2 ceramic pads, 2 calipers |
This Detroit Axle rear brake kit supplies everything needed to replace the rear braking components on an Infiniti Q50: two rear disc rotors, two rear ceramic pads, and two rear calipers. It is typically used as a direct-fit replacement when the factory rear brakes are worn or damaged and is aimed at owners doing a full rear brake job in one go. Notable features include pre-matched rotors and pads and included hardware and small consumables that simplify installation. In real-world use the kit delivers solid stopping power and consistent fitment for the Q50 rear hub, and many installers report quiet operation with minimal bedding issues. The practical benefit is a single-purchase solution that avoids sourcing separate parts and reduces garage time. Limitations are that this is an aftermarket multi-piece kit rather than a performance upgrade, so drivers seeking track-capable braking or premium-brand materials may prefer higher-end options; installers should still verify rotor thickness and pad bedding procedure during replacement.
Best for: Balanced buyers who want a single, reliable rear brake replacement for their Infiniti Q50 without sourcing multiple parts separately for a timely DIY or shop install.
Less Ideal for: Drivers who prioritize track performance, specialty materials, or premium-branded braking upgrades should consider higher-end calipers and rotors instead.
- Complete rear kit includes rotors, ceramic pads, and calipers for one straightforward purchase
- Parts come matched for fitment to the Q50 rear to reduce fitment errors during installation
- Many users report quiet operation and even rotor surface finish out of the box
- Includes basic consumables and hardware to simplify a DIY or shop installation
- Aftermarket kit built for replacement use rather than high-performance braking upgrades
- Included brake fluid has inconsistent quality per some user reports
Verdict A practical, complete rear brake replacement for the Infiniti Q50 that prioritizes fit and value over high-performance upgrades.
Choosing the Right Infiniti Q50 Brake Calipers: Key Factors to Consider
Fitment and Mounting Compatibility
Correct fitment preserves brake geometry, ensures even pad contact, and prevents premature wear. Verify that the caliper matches the Infiniti Q50 mounting points, piston size, and bleed port orientation so rotors and pads align properly. A caliper that fits exactly will avoid interference with suspension components and wheel spokes, and it reduces the chance of installation errors. Mismatched fitment can cause vibration, uneven braking, or difficulty torquing the mounting bolts. Confirming compatibility up front saves time and prevents wasted returns or rework.
Piston and Bore Materials
The piston and bore material affects heat transfer, corrosion resistance, and longevity. Stainless steel or phenolic pistons resist corrosion differently and have distinct heat-handling traits; the bore finish and coating help prevent pitting and sticking under repeated thermal cycles. Materials that resist corrosion reduce the likelihood of a caliper sticking symptoms developing over time. Consider the operating environment you expect. In humid or salted-road climates, corrosion-resistant finishes and compatible piston materials extend service intervals and help maintain smooth piston movement.
Seals, Boots, and Fluid Compatibility
High-quality seals and dust boots keep contaminants out of the piston bore and maintain hydraulic pressure. The design and compound of seals influence how well they tolerate heat and brake fluid exposure without swelling or cracking. Boots should flex without tearing to accommodate piston movement and road debris. Seals that degrade allow moisture into the system, which can lead to internal corrosion and brake fluid contamination. Choosing calipers with robust sealing systems lowers the risk of leaks and supports consistent pedal feel.
Corrosion Protection and Coatings
Coatings and surface treatments protect the caliper housing from rust and pitting, which can impair piston movement and mounting hardware. Zinc plating, ceramic coatings, or specialized paint systems offer varying degrees of protection depending on exposure to road salt and moisture. Better coatings help retain smooth operation and appearance over time. Pay attention to warranty or coating specifications if you drive in corrosive conditions. Enhanced protection reduces the frequency of caliper replacement and can preserve brake caliper price value in maintenance planning.
Serviceability and Parts Availability
Service-friendly calipers simplify brake maintenance and can lower long-term ownership costs. Features such as accessible bleeder screws, replaceable guide pins, and compatibility with brake caliper rebuild kit components make it easier to refurbish a caliper without full replacement. Readily available spare parts mean you can handle rebuilds or repairs quickly. If you prefer servicing at home or expect high-mileage use, choose calipers with common rebuild parts and clear instructions for how to replace brake caliper components safely.
Intended Application: Front Versus Rear
Front and rear brake calipers face different loads and heat cycles, so choosing the correct side matter. Front brake calipers typically handle more braking force and heat, while rear calipers may be smaller and subject to parking brake mechanisms. Ensure the caliper you select is designed for the Infiniti Q50 front or rear axle as required. Using the wrong axle specification can lead to suboptimal braking balance, uneven pad wear, and compromised stopping performance. Confirming axle-specific requirements prevents functional and safety issues.
FAQ
How do I know when my Infiniti Q50 needs a brake caliper replacement?
Common signs include uneven pad wear, a pulling sensation under braking, visible brake fluid leaks near the caliper, or a soft brake pedal. You may also notice caliper sticking symptoms such as a dragging wheel or increased fuel consumption due to brake drag. If you spot any of these, have the braking system inspected to confirm whether the caliper or another component is the cause.
Can I install front and rear calipers myself?
Many owners can handle caliper replacement with basic mechanical skill and the right tools, including a torque wrench and a method for safely supporting the vehicle. The job usually involves bleeding the brake system afterwards to remove air. If you are unfamiliar with brake bleeding, hydraulic systems, or torque specifications for the Infiniti Q50, it is safer to seek professional service.
Are remanufactured brake calipers reliable for the Infiniti Q50?
Remanufactured brake calipers can be reliable if they were rebuilt to a high standard with new seals, pistons where needed, and proper corrosion protection. Reliability often depends on the quality control of the remanufacturer and the scope of parts replaced. Look for units with clear documentation of the rebuilding process and warranties that cover common failure modes.
What maintenance helps prevent caliper sticking symptoms?
Regular inspection of seals, guide pins, and mounting hardware keeps moving parts lubricated and free of corrosion. Cleaning and replacing weak or torn boots and using the correct grease on slide pins reduces binding. Also, timely brake fluid changes help prevent moisture-related corrosion inside the hydraulic circuit that can contribute to piston seizure.
Do I need a brake caliper rebuild kit or a full replacement?
Whether to rebuild or replace depends on the condition of the caliper housing, piston, and bore. Rebuild kits can restore function when the housing is sound and the bore is not pitted, and they are a cost-effective option for many repairs. If the bore is corroded or the housing is cracked, a full replacement is usually the safer choice.
How We Chose the Best Infiniti Q50 Brake Calipers
We focused on calipers that fit the Infiniti Q50 specifically and meet sensible durability and serviceability expectations. Key evaluation criteria included precise OEM-equivalent fitment to preserve brake geometry and ride feel; piston and bore materials plus corrosion-resistant coatings to limit seizing; seal and boot quality to reduce fluid leaks and contamination; mounting and bleed port design to simplify installation and maintenance; and overall manufacturing consistency to avoid uneven pad wear. We also considered whether units were suitable for front brake calipers or rear brake calipers applications and whether replacement components such as rebuild kits are readily available. We excluded calipers intended for other vehicle models, universal-fit adapters, or units lacking clear fitment documentation. We did not include speculative performance claims or options without verifiable manufacturing details. The result is a curated list of seven options that balance fitment, durability, and serviceability for Infiniti Q50 owners.
Our full evaluation process is outlined in our review methodology.
Conclusion
Choosing the right Infiniti Q50 brake calipers means balancing fitment accuracy, corrosion resistance, and serviceability. Prioritize calipers that match the Q50 mounting and piston specifications, offer robust seals and coatings, and provide straightforward access for bleeding and maintenance. Accept that higher durability often involves tradeoffs such as weight or finishing choices. Focus on the factors that matter most for your driving conditions, whether that is corrosion protection, easy rebuildability, or axle-specific performance, to get reliable braking performance over time.
Explore More:
- Check out all Infiniti Q50 parts & accessories
- Explore Brake System
- Browse all Auto Parts
