Note: This article contains affiliate links. If you click on these links and make a purchase, I may earn a small commission at no extra cost to you. This helps support my research and content. Read my full affiliate disclosure here.
If you drive a Subaru Impreza, a failing wheel speed sensor can cause traction and stability systems to behave unpredictably and trigger dashboard warnings. Picking the right ABS wheel speed sensor matters because fit and signal fidelity directly affect braking and safety systems. This guide presents seven shortlisted options that meet the practical requirements for Subaru Impreza owners.We evaluated each candidate on fitment accuracy, electrical signal consistency, and durability under real-world conditions. Read on to see which sensors meet those benchmarks and why those criteria matter for reliable vehicle performance.
Looking for other parts? See all Subaru Impreza parts & accessories.
Top Picks at a Glance
| Best Reviewed A top-rated pick with lots of positive feedback | A-Premium ABS Wheel Speed Sensor Set for Subaru WRX/WRX STI (Rear, 2‑pc) |  |
| Most Popular A crowd favorite that many people choose with confidence | Ruizure Front Left ABS Wheel Speed Sensor (Front Left) |  |
| Best Quality Built to a higher standard if you want something more solid | Holstein Parts ABS Wheel Speed Sensor (Front Right) |  |
| Best Budget The cheapest option that still gets the job done reliably | A-Premium ABS Wheel Speed Sensor for Subaru Impreza (Rear Right Passenger Side) |  |
| Most Sold A high-volume bestseller chosen again and again | moseiny 4-Pack ABS Wheel Speed Sensors for Subaru Impreza (Front & Rear, Left & Right) |  |
| Best Value for Money The sweet spot between price and what you get | Mteycei Front Right ABS Wheel Speed Sensor (fits Subaru Impreza 2012–2016) |  |
| Best Overall The best all-around choice for most situations | TRQ Front ABS Wheel Speed Sensor Set (2-piece) for Subaru Impreza/Crosstrek/Forester |  |
1. A-Premium ABS Wheel Speed Sensor Set for Subaru WRX/WRX STI (Rear, 2‑pc)
| Compatible models | Subaru WRX 2015-2021, WRX STI 2015-2021 (without lane departure warning) |
|---|---|
| Location | Rear left and right |
| Connector pins | 2 Pins |
| Mounting type | Flange Mount |
| Material | Acrylonitrile Butadiene Styrene |
This A-Premium two-piece rear wheel speed sensor set replaces the factory rear left and right sensors on compatible Subaru WRX and WRX STI models without lane departure warning. It is typically used to restore ABS and traction control operation after a failed sensor triggers warning lights. The sensors mount using the same flange location and use a two-pin connector for a direct plug-in fit when matched to the listed reference numbers. In everyday use the product returns the ABS system to normal function and can clear warning lights once installed, which reviewers report on 2015–2021 WRX platforms. The sensors are molded from ABS plastic and come as a matched pair, which simplifies replacement of both sides at once. Limitations include fitment restricted to models without lane departure warning and the need to verify the exact reference numbers before ordering; buyers who require factory-brand parts or extended support may prefer a factory replacement instead.
Best for: Reliability-focused buyers who prioritize restoring ABS and traction control quickly on a Subaru WRX/WRX STI and prefer a matched, ready-to-install sensor pair to get the car back on the road.
Less Ideal for: Those seeking OEM-brand parts, extended manufacturer support, or fitment for Subaru models equipped with lane departure warning should consider other options.
- Sold as a matched two-piece rear sensor set, allowing simultaneous replacement of both sides
- Direct flange-mount design with a two-pin connector for straightforward plug-in installation
- Compatible with many 2015–2021 WRX and WRX STI models without lane departure warning
- Molded ABS construction resists corrosion compared with exposed metal components
- Not compatible with models that have lane departure warning systems
- Aftermarket unit may not offer the same long-term support or exact fit nuance as factory replacements
Verdict A practical, matched rear sensor pair that reliably restores ABS function on compatible WRX and WRX STI models without lane departure warning.
2. Ruizure Front Left ABS Wheel Speed Sensor (Front Left)
| Compatible models | 2016-2017 Subaru Crosstrek; 2014-2018 Subaru Forester; 2013-2015 Subaru Impreza |
|---|---|
| Position | Front left (driver side) |
| Material | Acrylonitrile Butadiene Styrene |
| Mounting type | Flange mount |
This Ruizure front-left ABS wheel speed sensor is a direct replacement component meant to restore wheel-speed readings for affected Subaru models and clear ABS-related warning lights. It plugs into the factory flange mount and feeds speed data to the vehicle’s ABS/traction control module, so it is typically used when a damaged or failed sensor triggers codes or degraded braking stability. The sensor is molded from durable ABS plastic and listed with common interchange numbers for easy cross-referencing. Practical benefits include a straightforward swap-in installation without modifications and compatibility with 2013–2018 Impreza and Forester and 2016–2017 Crosstrek model years named in the listing. Limitations are typical of aftermarket sensors: fit and long-term corrosion resistance can vary from factory-quality parts, and buyers should verify connector and harness match before installation to avoid extra troubleshooting. Ruizure provides a two-year warranty which offers some post-purchase assurance.
Best for: Buyers seeking a convenient, ready-to-install replacement to clear ABS warnings and restore normal braking behavior without sourcing OEM parts; ideal for owners who prioritize quick fixes and straightforward maintenance.
Less Ideal for: Drivers who want guaranteed factory-spec longevity or those restoring vehicles to full OEM originality should consider sourcing a factory-quality sensor instead.
- Direct-fit front-left replacement for specified Subaru models so installation is usually plug-and-play.
- Molded construction intended to resist road exposure and provide reliable wheel-speed signals to ABS/traction systems.
- Lists common interchange part numbers to simplify cross-referencing with factory parts and service manuals.
- Backed by a two-year manufacturer warranty for added peace of mind.
- Aftermarket construction may not exactly match factory corrosion resistance or lifespan.
- Compatibility is limited to the specific Subaru model years listed so verification against your vehicle harness is required.
Verdict A convenient, plug-and-play front-left ABS speed sensor for specified Subaru models that gets ABS systems back working quickly, with the caveat that long-term OEM-level durability may vary.
3. Holstein Parts ABS Wheel Speed Sensor (Front Right)
| Mounting Type | Wheel Mount |
|---|---|
| Output Type | electrical signal |
| Specific Uses For Product | Speed |
| Manufacturer Part Number | 2ABS1041 |
| OEM Part Number | 26740AA001 |
This Holstein front-right ABS wheel speed sensor replaces the factory unit on compatible Subaru Impreza models to restore accurate wheel speed readings for ABS and traction systems. It is designed for direct fit and uses reinforced plastic housing, OEM-style connectors and terminals, and included grommets and wire clips to simplify installation and routing. In practice it performs the same role as the original sensor: it senses wheel rotation, sends an electrical signal to the vehicle control modules, and helps prevent ABS faults and traction loss warnings. The reinforced housing and water-tight connector aim to resist road grime and moisture, improving longevity versus cheap, unprotected aftermarket pieces. Limitations are that the part is sold individually and fitment is limited to specific 1995–1999 Impreza/Legacy configurations, so you must confirm right-side fitment and your model year before purchase. Expect a straightforward bolt-in replacement for drivers seeking a high-quality, factory-style sensor without swapping the entire hub assembly.
Best for: Performance-oriented Subaru owners who prioritize restoring precise ABS and traction system function with a high-quality, factory-style replacement part for a specific Impreza model year.
Less Ideal for: Drivers who want a multi-vehicle universal sensor or those who need coverage for both sides of an axle without buying separate units should look elsewhere.
- Direct factory-style replacement fit for affected Subaru models for straightforward installation
- Reinforced plastic housing and water-tight OEM-style connector for better resistance to moisture and contaminants
- Includes grommets and wire clips to ensure correct routing and secure mounting
- Arrives packaged to protect the sensor electronics during handling and storage
- Sold as a single sensor so purchasing two is required for axle-wide replacements
- Compatibility limited to select 1995–1999 Subaru configurations so fitment must be verified before ordering
Verdict A factory-replacement-quality front-right ABS sensor built to restore accurate wheel speed readings on compatible 1995–1999 Subaru Impreza models, sold individually so confirm fitment before buying.
4. A-Premium ABS Wheel Speed Sensor for Subaru Impreza (Rear Right Passenger Side)
| Material | Acrylonitrile Butadiene Styrene |
|---|---|
| Mounting Type | Flange Mount |
| Output Type | Digital |
| Location | Rear Right Passenger Side |
This A-Premium ABS wheel speed sensor is a direct-fit replacement intended for the rear right (passenger) side of select Subaru Impreza models from the 2012–2015 era. It installs in place of the factory sensor and provides a digital wheel-speed output to the vehicle's ABS and traction systems. The unit is molded from ABS plastic and ships with the manufacturer part references used to confirm fit. In practice the sensor is useful for clearing ABS lights and restoring correct speed readings after a failed factory sensor, and many owners report straightforward installation and reliable operation. Because this is an aftermarket budget option, fit and compatibility can vary by year and submodel so double-check vehicle fitment before ordering and be prepared to compare connector and mounting details during installation. The seller offers a one-year unlimited-mileage guarantee, but some buyers have needed to source alternative sensors when their vehicle did not recognize the unit.
Best for: Budget-conscious Subaru Impreza owners looking to clear ABS warnings and restore wheel-speed signals without paying for an OEM sensor.
Less Ideal for: Owners who need guaranteed factory-match parts or prefer buying from a dealer-backed source should consider factory-quality alternatives instead.
- Designed to match factory placement for the rear right wheel on compatible Impreza models
- Digital output suitable for ABS and traction control systems
- Low-cost alternative to factory replacement sensors
- Many users report easy installation and restored ABS function
- Occasional compatibility failures reported on some model years or submodels
- Aftermarket fitment may require checking connector orientation and mounting during install
Verdict A very affordable replacement for rear-right Impreza speed-sensor failures that works for many owners but requires careful fitment checks before installation.
5. moseiny 4-Pack ABS Wheel Speed Sensors for Subaru Impreza (Front & Rear, Left & Right)
| Brand | moseiny |
|---|---|
| Material | Acrylonitrile Butadiene Styrene |
| Mounting Type | Flange Mount |
| Output Type | Push-Pull |
This 4-pack supplies front and rear left/right ABS wheel speed sensors intended to restore a Subaru Impreza's wheel-speed sensing after a failure. Installers typically replace the faulty sensor(s) to clear ABS warnings, stop unwanted traction control interventions, and recover normal anti-lock braking behavior. The sensors are sold as a matched set and reference common OEM part numbers for Impreza fitment, which simplifies sourcing the right locations. They are molded plastic assemblies with flange mounts and push-pull outputs, so installation follows the same connector and mounting points as the factory units. Practical benefits include replacing all four corners at once for consistent sensor performance and avoiding intermittent ABS faults from an aging neighbor sensor. Limits are that instructions are not included and professional installation is recommended, so DIYers should be comfortable with lifting the vehicle and handling wheel/hub components; the listing does not provide vehicle-specific torque or diagnostic guidance and fit should be verified against the vehicle VIN before purchase.
Best for: Risk-averse mainstream buyers who prioritize restoring factory-like braking and ABS behavior on their Subaru Impreza with a ready-made matched sensor set.
Less Ideal for: Owners who prefer detailed OEM documentation, step-by-step installation guides, or want sensors with explicit long-term durability testing and warranty coverage should consider alternatives.
- Complete four-sensor kit covers front and rear left and right locations for a full replacement
- References multiple factory part numbers for straightforward match to Impreza parts
- Flange-mount design and factory-style electrical connector make installation compatible with OEM mounting points
- No installation instructions included and professional installation is recommended
- Material and long-term durability claims are generic and not supported by extended lifespan data
Verdict A convenient four-pack that lets risk-averse Impreza owners replace all wheel-speed sensors at once to restore ABS function, but plan for professional installation and verify fitment.
6. Mteycei Front Right ABS Wheel Speed Sensor (fits Subaru Impreza 2012–2016)
| Compatible vehicle | Subaru Impreza 2012-2016 |
|---|---|
| Location | Front Right |
| OEM part numbers replaced | 27540FJ000, 27540SG000 |
| Manufacturer part number | XFJ-5S14134-AB |
This Mteycei front right wheel speed sensor replaces the factory part that feeds wheel-rotation data to the ABS, traction control, and stability systems on Subaru Impreza (2012–2016). Installation is the typical plug-and-play swap at the hub: unplug the damaged sensor, remove its retaining bolt, fit the new sensor and reconnect the harness. The listing emphasizes OEM-compatible fitment and quality-tested materials, so it restores the vehicle systems that depend on wheel-speed input and clears ABS-related warning lights when the fault is the sensor. Packaging is marked to help avoid left/right mixups and the part ships with the single sensor required for one side. Limitations to note are that this is a single-side aftermarket replacement rather than an OEM-branded part and long-term durability claims beyond initial QA testing are not documented in detail. Buyers should verify connector and mounting shape against their original sensor before ordering.
Best for: Practical optimizers looking to restore ABS and traction system functionality on a budget while keeping repairs simple and largely DIY-friendly.
Less Ideal for: Buyers seeking an OEM-branded sensor with documented long-term durability testing or those wanting to replace multiple sensors in one purchase should consider alternatives.
- Direct replacement for Subaru Impreza front right speed sensor with listed factory part numbers 27540FJ000 and 27540SG000.
- Plug-and-play design that uses the factory harness and mounting location for straightforward installation.
- Marked packaging and sensor orientation marking to reduce installation errors when replacing multiple sensors.
- Aftermarket unit with limited public long-term reliability data compared with established OEM suppliers.
- Sold as a single sensor so you may need an additional purchase if replacing both sides or matching wear.
Verdict A cost-conscious, plug-and-play front right replacement that restores ABS function on 2012–2016 Subaru Impreza but is an aftermarket single-side unit rather than an OEM part.
7. TRQ Front ABS Wheel Speed Sensor Set (2-piece) for Subaru Impreza/Crosstrek/Forester
| Brand | TRQ |
|---|---|
| Material | Acrylonitrile Butadiene Styrene |
| Mounting Type | Flange Mount |
| Output Type | Push-Pull |
This TRQ two-piece front wheel speed sensor kit replaces both left and right sensors to restore ABS and wheel-speed inputs on compatible Subaru models. Intended as a direct-fit replacement, the kit includes pre-assembled sensors that mount in the factory locations and plug into the vehicle harness, which simplifies DIY installation and reduces garage time. The parts are made of ABS plastic with machined exterior details and reference common OEM part numbers so they match factory signal and mounting points. Practical benefits include replacing worn or failed sensors in pairs to avoid uneven performance and using TRQ's online DIY videos to guide installation. Limitations are that the kit is specific to the listed Subaru model years and only covers the front axle, so it will not address rear-sensor faults or unrelated ABS system problems; professional calibration may be required if the vehicle shows persistent diagnostic codes. Overall it is a straightforward, balanced replacement option for routine ABS sensor failures on supported Subaru Impreza applications.
Best for: Balanced all-round buyers who want a straightforward, factory-replacement style fix for front ABS sensor failures and prefer a mix of DIY and professional support.
Less Ideal for: Drivers who need a full-vehicle ABS sensor overhaul, aftermarket performance sensors, or parts for models outside the listed Subaru years should look elsewhere.
- Sold as a two-piece front sensor kit to restore both driver and passenger side signals
- Pre-assembled, direct-fit design intended to match factory mounting and wiring for easier installation
- Includes common OEM reference numbers to aid fitment verification
- Manufacturer provides DIY videos to guide installation and reduce installation errors
- Only replaces front axle sensors and does not address rear sensors or other ABS module faults
- Fitment limited to specific Subaru model years and production dates
Verdict A practical, direct-fit front wheel speed sensor pair for supported Subaru Impreza applications that balances ease of installation with factory-style compatibility.
Choosing the Right Subaru Impreza ABS Wheel Speed Sensor: Key Factors to Consider
Fitment and Connector Compatibility
Correct physical fit and connector type are essential because the sensor must mount securely in the hub or knuckle and mate with the vehicle harness without modification. A sensor that looks similar but has a different mounting tab, plug shape, or terminal layout can lead to poor contact, intermittent faults, or the need for splicing.
When a sensor uses the factory connector and mounting geometry, installation is quicker and the electrical connection is more reliable. Fitment also affects the sensing gap to the tone ring, which influences signal amplitude and noise. Prioritize sensors with explicit vehicle fit information and matching connector terminals to reduce installation time and long-term trouble.
Signal Quality and Electrical Performance
The primary function of a wheel speed sensor is to produce a clean, consistent pulse or voltage that the ABS module can interpret accurately. Signal amplitude, waveform shape, and noise rejection all influence whether the control unit reads wheel speed correctly, especially at low speeds.
Sensors with weak or noisy signals can trigger intermittent ABS or traction control warnings, even if the mechanical installation is correct. Look for specifications or test data on output characteristics and sensors designed to maintain signal integrity under varying speeds and environmental conditions. Reliable electrical performance reduces false fault codes and improves system responsiveness.
Sealing and Corrosion Resistance
Wheel speed sensors sit close to the wheel and are exposed to water, salt, mud, and temperature swings. Effective sealing around the sensor body and connector prevents moisture ingress and corrosion, which are common causes of sensor failure. Corroded terminals or water-damaged housings often lead to open circuits or erratic signals.
Materials and protective coatings that resist road chemicals, plus robust boot designs that keep contaminants out, extend service life. Consider sensors with stainless or plated contacts and molded, sealed connectors to minimize maintenance and unexpected faults.
Harness and Strain Relief Design
The cable and strain relief connecting the sensor to the vehicle harness must withstand abrasion and repeated flexing from suspension and steering movement. Poorly reinforced harnesses can chafe on subframe components or fail at the sensor exit point, producing intermittent faults that are difficult to trace.
Sensors with reinforced sheathing, integrated clips or brackets, and molded strain reliefs reduce mechanical stress on the electrical connection. A thoughtful harness layout and mounting provisions help keep wiring secure and away from heat and moving parts, improving long-term reliability.
Thermal and Vibration Durability
Wheel speed sensors operate in a harsh mechanical environment with constant vibration and wide temperature swings. Components that resist fatigue and maintain calibration despite shock and heat are less likely to develop contact issues or internal fractures over time.
Select sensors with housings engineered for vibration damping and internal components rated for automotive temperature ranges. Durability testing or long-term field reports are useful indicators that a sensor will remain stable through typical driving conditions and seasonal extremes.
Serviceability and Installation Ease
How easy it is to replace the sensor affects repair time and the likelihood of a correct installation. Sensors that require minimal hub disassembly, use standard fasteners, and include clear mounting instructions reduce the chance of installation errors that can lead to poor alignment or damaged connectors.
Consider whether the sensor needs special tools or access procedures and whether replacement harness clips or hardware are included. Better serviceability reduces shop labor and lowers the chance of return visits due to installation-related issues.
FAQ
How can I tell if a Subaru Impreza ABS wheel speed sensor is failing?
Common signs include an ABS warning light or traction control light, irregular speedometer readings, or intermittent stability control interventions. You may also notice inconsistent braking behavior at low speeds. These symptoms often correspond to a weak or noisy sensor signal rather than a mechanical brake problem.
Where is the ABS wheel speed sensor located on a Subaru Impreza?
On a Subaru Impreza, wheel speed sensors are mounted at each wheel hub or knuckle near the tone ring. Front sensors are typically close to the brake rotor and steering knuckle, while rear sensors sit near the hub assembly. Exact placement varies by model year and axle, but they remain adjacent to the rotating tone ring.
Can I test the sensor wiring without specialized equipment?
You can perform basic checks with a multimeter to verify continuity and look for obvious shorts to ground. A visual inspection for damaged connectors or frayed wiring is also useful. For signal verification, an oscilloscope or a scan tool that displays wheel speed data provides more definitive results.
Will replacing a faulty wheel speed sensor clear ABS fault codes?
Replacing a failing sensor often resolves fault codes tied to that wheel, but the control module may retain historical codes until they are cleared with a scan tool. In some cases, additional issues like damaged tone rings or wiring faults must be addressed before codes will clear permanently.
Are aftermarket sensors as reliable as original equipment?
Aftermarket sensors can be reliable, but quality varies. Choose sensors with documented fitment, good sealing, and clear electrical specifications. Pay attention to build quality and warranty terms. OEM parts typically match factory specifications exactly, while some aftermarket options offer equivalent performance at different price points.
How We Chose the Best Subaru Impreza ABS Wheel Speed Sensor
We applied a focused set of technical and durability filters to identify sensors suitable for Subaru Impreza applications. Key evaluation criteria included: correct electrical connector and mounting style to ensure proper fitment; waveform and signal consistency under varied wheel speeds to avoid intermittent ABS faults; sealing and corrosion resistance to withstand road salt and moisture; mechanical robustness of the sensor body and harness strain relief to reduce failure under vibration; and ease of installation for typical DIY and shop repairs.We excluded units lacking clear fitment documentation or those with reports of connector incompatibility. We also filtered out sensors that did not provide measured or specified signal characteristics, such as output voltage or pulse clarity, because ambiguous electrical performance can lead to false fault codes. The final list favors sensors that combine documented fit, stable electrical output, and durable construction appropriate for Subaru Impreza operating conditions.
Our full evaluation process is outlined in our review methodology.
Conclusion
When choosing a replacement ABS wheel speed sensor for a Subaru Impreza, prioritize proper fitment and reliable electrical output. Those two factors have the greatest impact on avoiding false ABS or traction control warnings and ensuring consistent braking behavior.Also weigh sealing, harness robustness, and ease of installation against your expected service life and repair resources. Balancing signal fidelity and mechanical durability will yield the most dependable outcome for everyday driving and seasonal conditions.
Explore More:
- Check out all Subaru Impreza parts & accessories
- Explore ABS Wheel Speed Sensors Maintenance & Repair Guides
- Explore Electrical System
- Browse all Auto Parts
