Note: This article contains affiliate links. If you click on these links and make a purchase, I may earn a small commission at no extra cost to you. This helps support my research and content. Read my full affiliate disclosure here.
If your Nissan Altima is showing ABS warnings or inconsistent braking feel, a faulty wheel speed sensor is a common cause. Choosing the right ABS wheel speed sensor matters because correct fitment and reliable signal output affect ABS performance, traction control behavior, and diagnostic clarity. This guide covers seven shortlisted wheel speed sensors for the Nissan Altima selected for their fit accuracy and signal reliability. We explain the criteria used to evaluate them and what to look for so you can pick the option that best restores safe braking performance.
Looking for other parts? See all Nissan Altima parts & accessories.
Top Picks at a Glance
| Best Reviewed A top-rated pick with lots of positive feedback | ENA ABS Wheel Speed Sensor Set (Front Left & Right) for Nissan Altima/Maxima |  |
| Most Popular A crowd favorite that many people choose with confidence | MIKKUPPA ABS Wheel Speed Sensor — Front Left/Right (2-pack) |  |
| Best Quality Built to a higher standard if you want something more solid | Hiolpen ABS Wheel Speed Sensors (4‑Piece) for Nissan Altima / Maxima |  |
| Best Budget The cheapest option that still gets the job done reliably | Mteycei Front ABS Wheel Speed Sensor ( replaces 47910JA000 / 5S11191 ) |  |
| Most Sold A high-volume bestseller chosen again and again | A-Premium ABS Wheel Speed Sensor 4‑Piece Set for Nissan Altima/Maxima |  |
| Best Value for Money The sweet spot between price and what you get | OGATOO ABS Wheel Speed Sensor — Front Pair for Nissan Altima/Maxima |  |
| Best Overall The best all-around choice for most situations | Ruizure Front ABS Wheel Speed Sensor (pair) for Nissan Altima / Maxima |  |
1. ENA ABS Wheel Speed Sensor Set (Front Left & Right) for Nissan Altima/Maxima
| Brand | ENA |
|---|---|
| Material | Acrylonitrile Butadiene Styrene |
| Mounting Type | Flange Mount |
| Output Type | Digital |
| Fitment Type | Direct Replacement |
These ENA sensors replace the front left and right wheel speed sensors on Nissan Altima (2013–2018) and Maxima (2016–2020) models and are supplied as a set of two for synchronized replacement. They mount with a flange and use a two-pin digital connector to feed wheel speed data to the vehicle ABS/traction control system. Typical use is straightforward: unplug the old sensor, swap the sensor and harness clip, and resecure the mounting—customers report the ECU recognizes the new sensors after a few miles of driving. The ABS sensors are made from ABS plastic with waterproof connectors to resist road grime and moisture, which helps maintain reliable signals in daily driving and wet conditions. This package is a cost-effective factory-replacement style option compared with dealer parts, but buyers should expect aftermarket fit and finish to vary and verify fit for their exact engine and year choice before installation.
Best for: Reliability-focused buyers who prioritize restoring correct ABS and traction control operation without paying dealer prices and who prefer a direct-replacement part to get the vehicle back to safe, predictable braking behavior.
Less Ideal for: Shoppers seeking an OEM-sourced part with guaranteed factory materials or those who prefer an extended performance or heavy-duty sensor beyond factory-spec should consider other options.
- Sold as a matched pair for replacing both front sensors at once
- Direct replacement fitment for specified Altima and Maxima model years simplifies installation
- Waterproof connectors and sealed housing improve durability against moisture and road debris
- Digital two-pin connector matches factory-style electrical interface
- Made from plastic which can be less durable than higher-grade materials used by some OEM parts
Verdict A cost-effective matched pair of front ABS wheel speed sensors aimed at reliability-focused Nissan Altima and Maxima owners who need a quick, factory-style replacement.
2. MIKKUPPA ABS Wheel Speed Sensor — Front Left/Right (2-pack)
| Compatible vehicles | 2007–2013 Nissan Altima, 2009–2014 Nissan Maxima |
|---|---|
| Output type | NPN |
| Mounting type | Flange Mount |
| Maximum supply voltage | 12 Volts |
| Upper temperature rating | 85 Degrees Celsius |
This MIKKUPPA two-pack replaces front left and right wheel speed sensors and is offered as a direct-replacement option for 2007–2013 Nissan Altima and 2009–2014 Nissan Maxima. The sensors are flange-mounted with an NPN output and plug-and-play wiring, so typical use is to swap out worn or damaged sensors during an ABS or speedometer fault repair. The kit is promoted as factory-quality fitment for the listed OEM part numbers and is pre-tested by the manufacturer. Practical benefits include straightforward installation with common fasteners, restoration of ABS and speed-signal functions when the original sensor has failed, and a temperature rating useful for normal driving conditions. Limitations to be aware of are occasional fitment variability reported by some users and the fact that aftermarket sensors sometimes require careful installation and verification to avoid intermittent codes. If you need a budget-friendly replacement and are comfortable checking connections and clearing codes after install, this kit can get your ABS and speed readings back to normal quickly.
Best for: Buyers who prioritize convenience and a straightforward DIY repair for a working Nissan Altima or Maxima and want an affordable, ready-to-install replacement to clear ABS or speedometer faults.
Less Ideal for: Owners who prefer to avoid any risk of fitment fiddling or who demand dealer-level factory parts and support should consider higher-cost factory-direct replacements instead.
- Sold as a front left/right two-pack for replacing both sensors at once
- Plug-and-play flange mount design simplifies installation for common repairs
- Listed to replace specific OEM part numbers for direct compatibility with the stated Altima/Maxima years
- Pre-tested by the manufacturer and rated for typical under-hood temperatures
- Some buyers reported minor fitment differences versus factory parts that required adjustments
- Aftermarket length or tolerance variance could cause intermittent ABS codes if not seated tightly
Verdict A convenient, budget-friendly two-pack replacement for Altima/Maxima front wheel speed sensors that restores ABS function quickly when fitment is correct.
3. Hiolpen ABS Wheel Speed Sensors (4‑Piece) for Nissan Altima / Maxima
| Material | Acrylonitrile Butadiene Styrene |
|---|---|
| Measurement Accuracy | ±1.5% |
| Output Type | Push-Pull |
| Upper Temperature Rating | 150 Degrees Celsius |
These Hiolpen sensors replace the front and rear wheel-speed units on compatible Nissan Altima and Maxima models to restore ABS, traction control, and stability control functionality. The kit includes two front and two rear sensors and plugs into the factory mounting and wiring harness locations. In use they measure wheel rotation and feed real-time speed data to the vehicle control modules so braking interventions and traction systems operate correctly. Notable features include push-pull output, a specified measurement accuracy, and a high upper temperature rating making them suitable for normal driving and heavier-duty underhood temperatures. Practical benefits are straightforward swap-in replacement without modifying the car and having all four corners covered in one purchase. Limitations are that fitment is limited to the listed Altima and Maxima years so verification is required before installation, and this is a direct replacement level part rather than a performance-tuned sensor for motorsport applications.
Best for: Performance-oriented drivers who prioritize restoring precise wheel-speed feedback to maintain ABS and stability control behavior and want a complete kit to replace all sensors at once.
Less Ideal for: Drivers seeking purpose-built motorsport or data-logging sensors or owners of Nissan vehicles outside the listed model years should look for alternatives or vehicle-specific units.
- Complete 4-piece kit covers front left/right and rear left/right so all sensors can be replaced at once.
- Push-pull output and ±1.5% measurement accuracy provide consistent wheel-speed signals for ABS and traction systems.
- Upper temperature rating of 150°C supports durability in typical engine bay and brake-area conditions.
- Compatibility is limited to the specific Nissan Altima (2014–2018) and Nissan Maxima (2016–2020) model years listed.
- Not marketed as a performance or motorsport sensor, so it does not offer enhanced features beyond factory replacement functionality.
Verdict A full four-piece, factory-replacement sensor kit aimed at restoring accurate ABS and traction control function on the specified Altima and Maxima model years.
4. Mteycei Front ABS Wheel Speed Sensor ( replaces 47910JA000 / 5S11191 )
| Material | Acrylonitrile Butadiene Styrene |
|---|---|
| Mounting Type | Flange Mount |
| Output Type | Push-Pull |
| OEM Part Number | 47910JA000, 5S11191, ALS1442 |
This Mteycei ABS wheel speed sensor is a direct replacement part for the front left or right position on specific Nissan Altima and Maxima models and is used to restore proper wheel-speed input to the ABS, traction control, and stability systems. Installation is typical for a wheel sensor: unbolt the old sensor from the hub, unplug the factory connector, and fit this sensor using the original mounting points. The sensor is advertised as meeting or exceeding factory quality, comes with the harness and hardware needed for a straightforward swap, and is molded in ABS plastic for corrosion resistance. In real-world use it should clear ABS and traction-control fault codes and return normal braking behavior when the original sensor has failed. Expect a low-cost option that covers common Nissan part numbers, but be mindful to verify connector shape and part number against your vehicle before buying since fitment varies by year and engine. This is a practical budget replacement for DIYers or independent shops replacing a single failed wheel sensor.
Best for: Budget-conscious buyers looking to replace a single failed ABS sensor themselves or in a small shop to clear ABS and traction-control faults without paying for an OEM unit.
Less Ideal for: Drivers seeking a long-term dealer-level replacement or those who prefer parts with extensive manufacturer-backed warranties and documented longevity.
- Fits front left or right positions for specified 2007–2013 Nissan Altima and 2009–2013 Maxima fitments
- Includes harness and installation hardware for a complete swap
- Molded ABS construction resists corrosion common at wheel hubs
- Advertised to meet or exceed factory quality and tested by QA before packaging
- Fitment depends on exact connector and part number so cross-checking is required before purchase
- After-sales support and long-term durability claims are limited compared with factory parts
Verdict A low-cost, ready-to-install front wheel speed sensor for Nissan Altima/Maxima that works well for DIY replacements if you confirm exact fitment beforehand.
5. A-Premium ABS Wheel Speed Sensor 4‑Piece Set for Nissan Altima/Maxima
| Vehicle fitment | Nissan Altima 2014-2018, Maxima 2016-2020 |
|---|---|
| Connector pins | 2 Pins |
| Location | Front and Rear, driver and passenger side |
| Mounting type | Flange Mount |
This A-Premium 4-piece ABS wheel speed sensor kit replaces front and rear driver and passenger sensors for compatible Nissan Altima (2014–2018) and Maxima (2016–2020) models. Each sensor uses a two-pin electrical connector and flange-mount design so installation follows the factory mounting points and harnesses. The listing states the parts meet or exceed OEM specifications and are molded from ABS for corrosion resistance and durability. In practice this kit is intended to restore ABS functionality, correct wheel-speed error codes, and clear related traction or stability warnings when the original sensors have failed. The manufacturer offers a one-year unlimited-mileage guarantee. Limitations include reliance on correct fitment selection for year and position and the usual potential variability in aftermarket sensor calibration versus factory parts, so confirm vehicle reference numbers before ordering.
Best for: Risk-averse mainstream buyers seeking a direct replacement to restore ABS and stability systems on a specific Nissan Altima or Maxima while prioritizing straightforward installation and manufacturer backing.
Less Ideal for: Those who prefer dealer-sourced factory parts or need sensors certified to a specific OEM calibration procedure should consider alternatives.
- Complete 4-piece set covers front and rear, driver and passenger positions for one vehicle.
- Two-pin connector and flange-mount design match factory-style installation for straightforward replacement.
- Manufacturer says components meet or exceed factory specifications for reliable ABS signal output.
- Made from ABS material that resists corrosion and road contaminants for longer service life.
- Fitment limited to specified Nissan Altima and Maxima model years so must confirm year and position before purchase.
- As an aftermarket sensor, exact calibration may differ slightly from factory sensors under some diagnostics.
Verdict A practical four-piece aftermarket sensor kit that replaces all wheel positions for certain Nissan Altima and Maxima models to restore ABS function with factory-style installation.
6. OGATOO ABS Wheel Speed Sensor — Front Pair for Nissan Altima/Maxima
| Compatibility | Select Nissan Altima and Maxima model years listed by manufacturer |
|---|---|
| Connector | 2 pins |
| Location | Front driver and passenger side |
| Package | 2 pieces |
This OGATOO kit supplies two front ABS wheel speed sensors intended as direct replacements for the factory units on specified Nissan Altima and Maxima model years. The sensors measure wheel rotation and send digital signals to the vehicle control module to support ABS and traction systems; they come as a driver and passenger side pair with two-pin connectors and flange mounting for straightforward swap-in installation. In practice they are used to clear ABS lights, restore proper wheel-speed input, and return normal ABS/traction control function after a failed sensor. Buyers report the sensors match OEM mounting points and connectors, and the package is useful because it includes both sides so you have a spare. Limitations are typical of aftermarket sensors: long-term durability may vary compared with higher-cost factory replacements and some users may need to clean grime from the old connector during installation to get a snug fit. For a practical, cost-conscious repair this set restores ABS function without the premium cost of dealer parts.
Best for: Practical optimizers who want a reliable, affordable fix to restore ABS function on a Nissan Altima or Maxima without paying dealer prices.
Less Ideal for: Drivers seeking an exact long-term OEM replacement with manufacturer-backed certificates or those unwilling to accept typical aftermarket longevity variability should consider alternatives.
- Sold as a driver and passenger side pair so you get a spare or can replace both at once.
- Designed to match OEM mounting style and connector type for direct fit on listed Nissan models.
- Restores ABS and traction control signals to clear warning lights and return normal braking behavior.
- Low-cost alternative to dealership parts, making maintenance cheaper for older vehicles.
- Aftermarket build quality may not match higher-priced factory parts for very long service life.
- Connector fit can be tight if vehicle harness is corroded or dirty, occasionally requiring cleaning during install.
Verdict A budget-friendly, plug-and-play front ABS sensor pair that restores ABS function on compatible Nissan Altima and Maxima models without the dealer price.
7. Ruizure Front ABS Wheel Speed Sensor (pair) for Nissan Altima / Maxima
| Brand | Ruizure |
|---|---|
| Material | Acrylonitrile Butadiene Styrene |
| Maximum Supply Voltage | 12 Volts |
| Mounting Type | Flange Mount |
| Specific Uses For Product | Front ABS wheel speed sensor fit for 2007-2013 Nissan Altima; 2009-2014 Nissan Maxima |
These Ruizure front ABS wheel speed sensors are sold as a matched pair for driver and passenger sides and plug into the vehicle harness to provide wheel speed data to the ABS/traction control system. They are typically used as a direct replacement when a failed sensor triggers an ABS light or causes traction control faults. The sensors use a flange mount with a standard electrical output and are rated for the vehicle 12 volt system. In practice they install in the front wheel knuckle and require normal brake-rotor or hub access for removal of the old unit. Ruizure highlights durable construction and customer reports indicate accurate fit and reliable operation on the specified Altima and Maxima years. Limitations include typical variability in longevity compared with higher-end branded parts and the need to confirm exact fitment to your build before ordering since only certain model years are covered. These are a practical, budget-friendly swap when you want a straightforward sensor replacement without dealer parts pricing.
Best for: A balanced all-round buyer who wants an affordable, ready-to-install replacement that restores ABS and traction control operation on covered Nissan Altima and Maxima model years.
Less Ideal for: Drivers seeking an exact branded OEM replacement or extended-life, high-end aftermarket sensor should consider factory-quality or premium options instead.
- Sold as a matched pair for driver and passenger front positions
- Designed to plug into the factory wiring harness for straightforward replacement
- Flange mount matches common factory mounting for easy installation
- Made to operate on a standard 12V vehicle electrical system
- Fitment limited to the specific Nissan Altima and Maxima years listed so verify compatibility before purchase
- Aftermarket longevity may vary compared with premium OE-brand sensors
Verdict A cost-conscious, matched-pair replacement that restores front ABS speed sensing on the specified Altima and Maxima years without dealer markup.
Choosing the Right Nissan Altima ABS Wheel Speed Sensor: Key Factors to Consider
Fitment and Mounting Compatibility
Mechanical fit is essential because the sensor must align precisely with the tone ring or reluctor to produce an accurate signal. A sensor that does not seat correctly can give intermittent or weak pulses, triggering ABS warnings or degraded ABS function.
Check connector shape, mounting bolt locations, and wire routing to avoid interference with suspension or brake components. Proper fit reduces the need for hardware modification and shortens installation time, which matters for both DIYers and professional technicians.
Signal Output and Electrical Specs
The sensor's electrical characteristics determine how the vehicle control module interprets wheel speed. Consistent output voltage and the correct impedance range help prevent false error codes and ensure stable ABS engagement.
Look for sensors with published specs and designs that match the Altima's factory sensor type, whether active or passive. Matching electrical behavior minimizes the chance of compatibility issues with the vehicle's ABS electronics.
Durability and Environmental Resistance
Wheel speed sensors operate in harsh conditions with water, salt, dirt, and road debris. Good sealing, corrosion-resistant materials, and a robust sensing face help maintain long-term performance.
Durable wiring and secure strain relief at connector points prevent premature failure from flexing or abrasion. Prioritizing environmental resistance reduces the risk of repeat failures in climates with heavy road salt or off-road exposure.
Wiring and Connector Quality
A reliable electrical connection depends on quality terminals, properly routed wires, and correct connector latching. Poor connectors can cause intermittent signals that are difficult to diagnose.
Inspect for molded connectors, protected terminations, and wiring sheathing that resists chafing. If a harness section is included, check that it follows the vehicle's original routing to avoid contact with hot or moving parts.
Ease of Installation
Installation simplicity affects total time and the chance of installation-related issues. Sensors that match factory mounting and use standard fasteners reduce the risk of incorrect assembly.
Consider whether the unit requires special tools or calibration after fitting. A sensor that installs cleanly and secures with existing brackets helps ensure a correct, durable repair without extra modifications.
Diagnostic Compatibility and Error Prevention
A sensor that provides a clean, consistent signal helps diagnostics and reduces return visits. Sensors that mimic factory signal patterns are less likely to trigger ABS-related error codes or intermittent faults.
Think about how the sensor behaves during initial drive cycles and under low-speed conditions where ABS sensors often struggle. Choosing a part with predictable diagnostic behavior simplifies troubleshooting and gives more confidence in the repair.
FAQ
What are common symptoms of a failing ABS wheel speed sensor on a Nissan Altima?
Common signs include an illuminated ABS warning lamp, intermittent traction control activation, and uneven or reduced ABS modulation during hard braking. You may also notice speedometer anomalies if the vehicle uses the same speed input. These symptoms often occur under the same driving conditions when the faulty sensor signal drops out.
Where is the ABS wheel speed sensor located on the Nissan Altima?
Each wheel speed sensor mounts near the wheel hub or steering knuckle, positioned to read the tone ring on the axle or hub. Access varies by front or rear location and by suspension layout, but they are generally reachable with the wheel removed and basic hand tools. Visual inspection can reveal damaged wiring or connectors.
Can I replace a Nissan Altima wheel speed sensor myself?
Many owners can replace a sensor with basic tools and a clear workspace, as sensors typically bolt to the hub and plug into an existing harness. Follow vehicle-specific access steps and torque specs, avoid stressing the wiring, and verify connector seating. If you are uncomfortable with vehicle diagnostics or undercar work, a technician can handle the job.
Will replacing the wheel speed sensor clear ABS codes?
Replacing a faulty sensor often resolves codes tied directly to that sensor, but existing fault codes may remain until the vehicle's computer runs its drive cycles or the codes are cleared with a scan tool. If the code persists, further diagnostics such as wiring checks or module inputs may be needed.
How can I diagnose whether a sensor or wiring is at fault?
Diagnosis typically starts with a visual inspection for damage, followed by measuring sensor resistance or output signal while spinning the wheel. Continuity and short-to-ground checks on the wiring harness can reveal breaks or corrosion. Many technicians also use an oscilloscope to verify the sensor waveform under rotation for a definitive assessment.
Is OEM always better than aftermarket for ABS sensors?
OEM parts match factory specifications by design, which can simplify fitment and electrical compatibility. However, many aftermarket sensors meet the required specs and offer good durability. The important factors are published electrical characteristics, correct mechanical fit, and build quality rather than solely brand origin.
How We Chose the Best Nissan Altima ABS Wheel Speed Sensor
We focused on sensors that deliver reliable wheel speed signals and match the Nissan Altima's original fitment and mounting points. Key evaluation criteria included mechanical fit and connector compatibility, signal consistency under varied driving conditions, resistance to environmental exposure and corrosion, and ease of installation with standard tools. We also considered electrical specifications such as output voltage and sensor impedance to ensure diagnostic accuracy and minimize false ABS codes. Durability factors included sealing quality, materials used at the sensing face, and strain relief on the wiring harness where applicable. Exclusions: we excluded units without documented fitment data for the Nissan Altima, sensors lacking basic electrical specs, and parts that require major wiring or bracket modification. The final list emphasizes parts that balance reliable operation with straightforward installation and long-term resistance to road contaminants.
Our full evaluation process is outlined in our review methodology.
Conclusion
When choosing a Nissan Altima ABS wheel speed sensor, prioritize correct mechanical fit and matching electrical characteristics so the ABS control module receives a stable signal. Durability, connector quality, and ease of installation are the next most important factors, since they affect long-term reliability and serviceability. Expect tradeoffs between convenience and longevity: parts that closely mimic factory specs usually reduce diagnostic hassle, while ruggedized options may offer extra resistance to environmental damage. Use the evaluation criteria above to match the replacement to your driving conditions and diagnostic needs.
Explore More:
- Check out all Nissan Altima parts & accessories
- Explore Electrical System
- Browse all Auto Parts
