Note: This article contains affiliate links. If you click on these links and make a purchase, I may earn a small commission at no extra cost to you. This helps support my research and content. Read my full affiliate disclosure here.
When an ABS wheel speed sensor fails, you can experience unpredictable braking behavior, warning lights, and impaired traction control. Choosing the right replacement for your Infiniti QX60 matters because proper fitment and signal accuracy directly influence the vehicle's anti-lock braking and stability systems. This guide highlights the top shortlisted sensors for the QX60 and explains the practical differences that affect everyday driving.Below you will find the top picks for the Infiniti QX60 ABS wheel speed sensor, along with the evaluation criteria we used to identify reliable options and what to watch for during installation.
Looking for other parts? See all Infiniti QX60 parts & accessories.
Top Picks at a Glance
1. A-Premium ABS Wheel Speed Sensor for Nissan Pathfinder and Infiniti QX60 (Rear, Driver and Passenger)
| Compatible vehicles | Infiniti QX60 2014-2019; Nissan Pathfinder 2013-2020 |
|---|---|
| Connector pins | 2 Pins |
| Location | Rear driver and passenger side |
| Output type | Digital |
| Mounting type | Flange Mount |
This A-Premium ABS wheel speed sensor plugs into the vehicle harness and replaces the rear left and right sensors to restore accurate wheel speed signals to the anti-lock brake system. It is sold as a direct-fit replacement for Infiniti QX60 models from 2014–2019 and is typically used when a faulty sensor triggers ABS or traction control warnings or causes stability control issues. Notable features include a two-pin connector, flange-mount design, and digital output for consistent signal transmission. Buyers will appreciate the claimed factory-spec fit, included retainer clip locations that match the harness, and a one-year unlimited-mileage guarantee for peace of mind. Installation is straightforward for a competent DIYer, though removing rusted retainers on older vehicles can be the hardest part. A small number of users report occasional premature failure or tight dimensional tolerance that required minor trimming during installation, so there is a slight risk of a defective unit or fitment variance. For QX60 owners this sensor offers a practical, lower-cost alternative to dealer parts with mostly reliable real-world performance.
Best for: Balanced owners wanting a reliable, cost-conscious factory-style replacement sensor for routine ABS or stability-control repairs on an Infiniti QX60.
Less Ideal for: Drivers seeking a premium OE-branded dealer part or those who prefer professional diagnosis and installation for complex electrical faults should consider alternatives.
- Direct-fit replacement specified for Infiniti QX60 2014–2019 rear sensor locations
- Two-pin digital output and flange mount match factory connector style for simple plug-in installation
- Includes matching retainer clip placements and factory-spec connector for correct harness routing
- One-year unlimited-mileage guarantee provides added buyer confidence
- Some buyers reported a small number of early failures requiring replacement
- Occasional tight dimensional tolerance on the housing that in rare cases needed minor trimming to fit
Verdict: A practical, mostly reliable factory-style rear ABS sensor for the QX60 that delivers OEM-like fit and function at a lower cost, with occasional fit or early-failure risks.
2. Holstein Parts ABS Wheel Speed Sensor (Rear Left)
| Mounting Type | Chassis Mount |
|---|---|
| Output Type | Push-Pull |
| Specific Uses For Product | Speed |
| Material Type | Acrylonitrile Butadiene Styrene, Plastic |
This Holstein rear-left ABS wheel speed sensor replaces the factory sensor to restore accurate wheel speed data for the ABS and traction control systems on compatible Infiniti QX60/JX35 and Nissan Pathfinder models. It is built with a reinforced plastic housing, OEM-style connector and included grommets and clips so installation follows factory routing and mounts cleanly. The durable wire harness sleeve on applicable SKUs helps resist abrasion and kinking in chassis mounting locations, which is useful when routing behind suspension components. In practical use the sensor returns a quick fault-free installation and reliable wheel speed readings that clear ABS warning lights when the original sensor fails. Limitations: this listing is sold individually and fitment is specific to rear-left on listed vehicle years and trims so verify fit before purchase, and plastic housings are durable but require careful handling during installation to avoid damage to the sensing tip or connector.
Best for: Performance-oriented buyers who want a factory-quality replacement sensor to restore ABS and traction control function and prioritize reliable, accurate wheel-speed readings during spirited driving.
Less Ideal for: Buyers looking for a universal sensor or one part to cover multiple wheel positions should look for multi-pack or differently specified items instead.
- Direct factory-quality replacement that restores fit, form, and function
- Reinforced plastic housing and sealed OEM-style connector for weather resistance
- Includes grommets and clips for correct mounting and routing
- Durable outer sleeve on the wire harness (select SKUs) reduces abrasion risk during installation
- Sold individually so replacing both sides requires purchasing two units
- Compatibility is limited to specific model years and trims so fit must be confirmed before ordering
Verdict: A factory-quality rear-left ABS wheel speed sensor that restores accurate wheel-speed signals for reliable ABS and traction control performance on compatible QX60/JX35 and Pathfinder models.
3. HiSport ALS2605 Front ABS Wheel Speed Sensor (fits Infiniti QX60, JX35 and Nissan Pathfinder)
| Compatible models | Infiniti JX35 2013, QX60 2014-2020; Nissan Pathfinder 2013-2020 |
|---|---|
| Manufacturer part number | HSABS2605 |
| Item model number | 47910-3JA0A |
| Package quantity | 1 PC Front ABS Wheel Speed Sensor |
This HiSport ALS2605 is a direct-fit style front ABS wheel speed sensor sold as a single replacement unit for compatible Infiniti QX60 and JX35 models and Nissan Pathfinder from the specified years. It connects to the factory wiring harness and measures wheel rotation to supply the ABS and traction control systems with speed data. Typical use is straightforward: remove the old sensor at the front hub, fit the new sensor and route the connector to the factory plug. The listing highlights lightweight construction and factory-replacement fit numbers to match OEM connectors, which should simplify installation and reduce the need for modifications. Practical benefits include restoring ABS and stability functions quickly and avoiding dash warnings. Limitations are that only one sensor is supplied so replacements for both sides require buying a second unit, and long-term durability compared with higher-end branded sensors cannot be verified from the listing alone.
Best for: Practical optimizers who prioritize low-cost, reliable fixes and want a straightforward replacement to clear ABS faults and restore normal brake system operation.
Less Ideal for: Customers seeking a premium, long-term performance sensor from a well-known aftermarket brand or those who prefer to replace both front sensors as part of a matched set in one purchase.
- Direct-fit replacement matching listed OEM part numbers for simple plug-and-play installation
- Sold as a single front sensor for targeted repairs without extra parts
- Lightweight construction makes handling and installation easier
- Only one sensor in the package so both sides require separate purchases
- Long-term durability and performance compared with premium branded sensors are not documented
Verdict: An affordable, direct-fit front wheel speed sensor aimed at budget-minded owners needing a quick plug-and-play ABS repair.
4. Wbsteanaten ABS Wheel Speed Sensor for Infiniti QX60 (Front)
| Fitment | Infiniti QX60 2014-2019 V6 3.5L |
|---|---|
| Position | Front Left & Right |
| Special Features | High sensitivity chip; IPX9K water resistant; rapid signal transmission |
| Manufacturer | Wbsteanaten |
This Wbsteanaten front ABS wheel speed sensor is a direct-fit replacement aimed at Infiniti QX60 owners who need a low-cost remedy for ABS or traction warnings. It plugs into the factory harness and supplies wheel speed data to the vehicle computer, restoring ABS, traction control, and stability functions after a failed sensor. Notable features include a claimed high-sensitivity chip for fast signal response, IPX9K water resistance for reliability in wet conditions, and heat-rated operation across a wide temperature range for durability. In practice the sensor is intended for simple swap-in installation without modifications and should return consistent wheel-speed readings that clear warning codes when the rest of the braking system is sound. The main limitations are the typical uncertainties with aftermarket parts: long-term durability vs a factory unit is less documented and fitment must be confirmed for year and position before buying. For a cost-focused repair this sensor offers the key functions most drivers need at a low price, but buyers who want extended proven longevity may prefer a higher-end or factory-quality unit.
Best for: Budget-conscious Infiniti QX60 owners looking for an affordable, quick repair to clear ABS or traction-control warnings and return normal system operation.
Less Ideal for: Drivers seeking a long-term, dealership-grade replacement or a sensor with an extended proven service history should consider higher-end factory-quality options instead.
- Designed to fit Infiniti QX60 2014–2019 front application for straightforward replacement
- Claims ultra-high sensitivity chip for fast, accurate wheel-speed signal output
- IPX9K water resistance and wide temperature rating for reliable performance in wet or extreme conditions
- Limited long-term reliability data compared with higher-cost factory-quality sensors
Verdict: A low-cost, direct-fit front speed sensor that restores ABS functionality on Infiniti QX60s while trading off the long-term assurance of a factory-quality unit.
5. A-Premium Rear Right ABS Wheel Speed Sensor for Infiniti QX60 / Pathfinder (47900-3JA0A)
| Mounting Type | Flange Mount |
|---|---|
| Output Type | Analog |
| Specific Uses For Product | Speed Sensor |
| Material Type | Acrylonitrile Butadiene Styrene |
This A-Premium rear right wheel speed sensor replaces a failed ABS/traction sensor on compatible Infiniti QX60 and Nissan Pathfinder models. It is a flange-mount, two-pin analog speed sensor intended for rear passenger-side installation and is supplied as a new aftermarket replacement tested by the manufacturer. In everyday use it plugs into the factory connector and uses the existing retainer points so installation is straightforward for a DIYer or shop when access is not obstructed by corrosion. Buyers report it clears ABS/traction faults and behaves like the factory part in most vehicles, and the supplier backs the part with a one-year unlimited-mileage guarantee. Expect occasional fitment variance on older or modified knuckles where minor trimming or careful alignment may be required. A small number of users have reported individual early failures, so keeping original error codes and doing a quick bench check before installation is advisable.
Best for: Owners prioritizing reliable, cost-effective factory-style replacements who want a tested aftermarket sensor to restore ABS and traction function on an Infiniti QX60 or compatible Pathfinder.
Less Ideal for: Drivers seeking OEM-branded parts or those who require a guaranteed lifetime part beyond the supplier’s one-year coverage should consider dealer-sourced alternatives.
- Direct-fit connector and retainer placement for quick replacement on specified rear right location
- Sold as a brand-new component with factory-style mounting for straightforward DIY or shop installation
- Manufacturer states 100% performance testing and claims to meet or exceed factory specifications
- Includes a one-year unlimited-mileage parts guarantee for buyer confidence
- Some buyers reported occasional fitment variance requiring minor trimming or adjustment
- A few users experienced individual early failures despite most reports being positive
Verdict: A cost-effective, factory-style rear right replacement speed sensor that restores ABS/traction function on Infiniti QX60 and compatible Nissan Pathfinders with mostly reliable fit and performance.
6. Ruizure Front ABS Wheel Speed Sensor ALS2605 for Nissan Pathfinder / Infiniti QX60 (1pc)
| Mounting Type | Flange Mount |
|---|---|
| Output Type | Push-Pull |
| Compatible Models | Front sensor for 2013-2020 Nissan Pathfinder and 2014-2020 Infiniti QX60 |
| Material Type | Acrylonitrile Butadiene Styrene |
This Ruizure front ABS wheel speed sensor is a factory-style replacement intended to restore wheel speed feedback to the ABS and traction systems on compatible Nissan Pathfinder and Infiniti QX60 models. It mounts in the front wheel hub using a flange-mount design and uses a push-pull electrical output that plugs into the vehicle harness for a straightforward swap. In practice the sensor replaces a failed OEM unit to clear ABS, traction control, and 4WD malfunction warnings and to recover proper speed-signal input for braking and stability systems. The listing highlights durable ABS plastic construction and interchange numbers that match common factory part references, which helps with correct fitment. Because it is sold as a single piece buyers should confirm left or right position before ordering and expect a simple install on vehicles with accessible front hubs. Some users report excellent fit and long life while a small number report early failure or minor fitment tweaks, so keep the old sensor and test the circuit before and after install when possible.
Best for: Convenience-driven buyers who want a quick, low-effort replacement to clear ABS or traction warnings and restore normal system operation without sourcing dealer parts.
Less Ideal for: Buyers seeking a lifetime or heavy-duty racing solution should consider higher-end OEM-equivalent or upgraded sensors and those who prefer to replace both sides every service interval may find single-piece packaging inconvenient.
- Direct-fit replacement for specified Pathfinder and QX60 front positions
- Flange-mount design and standard push-pull connector for simple swap into the factory harness
- Interchange numbers provided to cross-check compatibility with factory part references
- Durable plastic construction intended to withstand road exposure
- Sold as a single sensor so you must order the correct side or buy two for both wheels
- A few reviewers reported early failures or minor fitment adjustments on some vehicles
Verdict: A direct-fit, convenience-focused front ABS wheel speed sensor that restores ABS and traction system function on the specified Pathfinder and QX60 models.
7. TRQ Rear ABS Wheel Speed Sensor Set for Infiniti QX60 / JX35 / Nissan Pathfinder (Rear, 2-piece)
| Material | Acrylonitrile Butadiene Styrene |
|---|---|
| Mounting Type | Flange Mount |
| Output Type | Push Button |
| Quantity | 2 Piece |
This TRQ kit provides two rear ABS wheel speed sensors intended as direct replacement parts for the specified Infiniti QX60/JX35 and Nissan Pathfinder years. It installs in the rear driver and passenger positions and is offered as a pre-assembled, flange-mount sensor set that matches common factory fitment and electrical connections. In typical use it replaces failed or noisy sensors to restore accurate wheel-speed data for ABS and traction control systems. Notable practical features include plug-and-play design to simplify DIY or shop installation and TRQ's catalog of how-to videos to guide the repair. The kit lists multiple reference numbers for cross-referencing and arrives as a matched pair to avoid sourcing individual sensors separately. Limitations are that compatibility is limited to the listed vehicles and years so fitment must be confirmed before purchase, and the listing does not include extended testing data or warranty details in the product specs, so buyers relying on long-term durability claims should consider that uncertainty.
Best for: Risk-averse mainstream buyers who prioritize a straightforward, factory-style replacement and prefer parts backed by clear fitment guidance and installation support.
Less Ideal for: Shoppers needing universal or cross-vehicle sensor options or those seeking suppliers with detailed longevity testing and documented extended warranties should look elsewhere.
- Sold as a matched pair for both rear wheel positions, avoiding the need to buy sensors individually
- Designed for flange-mount direct replacement to simplify installation and ensure correct alignment
- Pre-assembled components and available DIY videos reduce installation time and help non-expert installers
- Fitment applies only to the listed Infiniti and Nissan models and years so incorrect selection will require return or replacement
- Manufacturer-supplied details do not include independent durability testing or explicit warranty information
Verdict: A practical, direct-fit rear sensor pair for Infiniti QX60/JX35 owners who want a plug-and-play replacement with DIY installation support.
Choosing the Right Infiniti QX60 ABS Wheel Speed Sensor: Key Factors to Consider
Electrical Signal Accuracy
A wheel speed sensor must generate a clean, consistent waveform so the vehicle's ABS module can accurately interpret wheel speed. Variations in amplitude or noise can trigger warning codes or cause the ABS to disengage temporarily.
Assessing signal accuracy matters because it affects braking modulation and traction control decisions. Even if a sensor fits mechanically, poor magnetic or Hall-effect performance can produce intermittent faults or false readings during cornering and stops.
Connector and Pin Compatibility
Correct electrical connector geometry and pin assignment are essential for plug-and-play replacement on the Infiniti QX60. Mismatched pins or loose terminals can lead to poor contact, intermittent signals, or short circuits.
Ensure the replacement sensor uses the same connector type and wiring orientation as the original. Reliable terminals and secure locking features reduce the risk of vibration-related disconnection or corrosion-driven resistance increases.
Mechanical Fit and Mounting
Proper mounting location and secure fasteners keep the sensor at the correct distance from the tone ring or reluctor wheel. If the sensor is misaligned or mounted too far from the target, the ABS module may receive weak or no signals.
Consider bracket shape, mounting hole spacing, and any integrated clips. Sensors designed for the vehicle will maintain correct air gap and resist movement from road vibration, which helps prevent intermittent faults after installation.
Sealing and Environmental Resistance
Wheel speed sensors are exposed to moisture, road salt, and debris. Effective sealing prevents water ingress that can short the sensing element or corrode contacts. Materials that resist salt and chemical exposure extend service life in varied climates.
Look for robust overmolding, corrosion-resistant metals, and durable cable jacketing. Good environmental protection reduces the likelihood of early failure and helps maintain consistent readings over the long term.
Thermal and Vibration Durability
Under-hood temperatures and road vibration place mechanical and electrical stress on sensors. Components that withstand thermal cycling and repeated vibration maintain their calibration and connection integrity.
Durability affects how often a sensor will need attention and whether it will produce intermittent fault codes. Prioritizing sensors with proven resistance to heat and mechanical fatigue can minimize future troubleshooting.
Installation Accessibility and Serviceability
Ease of installation matters because it influences the risk of damage during replacement and the time needed to restore ABS functionality. Sensors that allow straightforward access, use common fasteners, and include clear wiring orientation reduce installation errors.
Consider whether harness length and mounting hardware are adequate. Service-friendly designs make it simpler to verify wiring and perform tests such as an ABS sensor wiring test without complex disassembly.
How We Chose the Best Infiniti QX60 ABS Wheel Speed Sensor
Our selection focused on parts that deliver correct electrical output and secure mechanical fit for the Infiniti QX60. Primary criteria included signal accuracy under load, compatible connector and mounting design, and resistance to common failure modes such as moisture intrusion and corrosion. We also considered durability factors like housing material, thermal stability, and sealing quality to ensure long-term reliability on this vehicle.Additional filters covered ease of installation and the availability of clear installation information specific to the QX60. We excluded items that lacked explicit QX60 fitment data, non-functional or cosmetic duplicates, and parts without documented resistance to environmental exposure. The result is a shortlist emphasizing proper fit, reliable signal performance, and robust construction—dimensions that most affect braking system behavior and real-world safety.
Our full evaluation process is outlined in our review methodology.
FAQ
What are common symptoms of a failing ABS wheel speed sensor on an Infiniti QX60?
Common signs include the ABS warning light illuminating and, in many cases, reduced traction control function. You may also notice inconsistent braking feel or intermittent activation of the ABS under normal conditions. These symptoms often prompt a diagnostic trouble code related to wheel speed input.
Where is the ABS wheel speed sensor located on the Infiniti QX60?
On the QX60, wheel speed sensors are mounted at each wheel hub assembly near the tone ring or reluctor. Access typically requires lifting the vehicle and removing the wheel to reach the sensor and its mounting hardware. Exact access steps depend on whether the sensor is front or rear mounted.
Can I perform an ABS sensor wiring test myself?
You can perform basic checks such as inspecting the connector for corrosion and testing continuity with a multimeter. Measuring resistance and checking for signal while spinning the wheel can indicate sensor function. For accurate waveform and voltage testing, a scope or professional diagnostic tool is often required.
Will replacing the wheel speed sensor clear ABS-related codes?
Replacing a faulty sensor often resolves codes tied to that sensor, but stored codes may persist until the system completes a self-test or the codes are cleared with a scanner. It is also important to verify that wiring and connectors are intact, since replacement alone will not fix a wiring fault.
How can I tell if an ABS sensor is faulty versus the wiring or module?
Diagnosing involves inspecting connectors and harnesses for damage, testing sensor resistance and output, and checking for consistent signals while the wheel turns. If the sensor output is stable and wiring is intact yet faults remain, the issue may be upstream with the ABS module or control circuitry. A structured diagnostic approach reduces unnecessary part replacements.
Are there tradeoffs between OEM and aftermarket wheel speed sensors?
OEM parts are designed to match original fit and specifications, which can simplify installation. Aftermarket options may offer similar performance but can vary in construction and long-term durability. Evaluating connector compatibility, sealing quality, and documented fitment for the QX60 helps assess whether a given aftermarket sensor is a reliable choice.
Conclusion
When replacing an Infiniti QX60 ABS wheel speed sensor, prioritize proper fitment, signal accuracy, and environmental durability. These factors directly affect ABS and traction control performance and influence how often you will need to revisit the repair.Expect tradeoffs between ease of installation and long-term robustness. Focus on sensors with verified connector compatibility and durable sealing, inspect wiring during installation, and verify correct operation after fitting to ensure the system returns to normal function.
Explore More:
- Check out all Infiniti QX60 parts & accessories
- Explore ABS Wheel Speed Sensors Maintenance & Repair Guides
- Explore Electrical System
- Browse all Auto Parts
