Note: This article contains affiliate links. If you click on these links and make a purchase, I may earn a small commission at no extra cost to you. This helps support my research and content. Read my full affiliate disclaimer here.
When ABS warning lights appear or you notice uneven braking behavior, a faulty wheel speed sensor is often the cause. Choosing the right Ford Fusion ABS wheel speed sensor affects braking system feedback, driving stability, and diagnostic clarity. This guide covers our shortlisted top picks for Fusion owners, selected for fitment reliability and build quality. We evaluated sensors based on fit accuracy, durability, and ease of installation to help you find a sensible replacement. Read on for practical buying factors and answers to common fitment questions.
Looking for other parts? See all Ford Fusion parts & accessories.
Top Picks at a Glance
| Best Reviewed A top-rated pick with lots of positive feedback | A-Premium ABS Wheel Speed Sensor — Rear Right (Passenger) for Ford Fusion/MKZ/Milan |  |
| Most Popular A crowd favorite that many people choose with confidence | A-Premium ABS Wheel Speed Sensor for Ford Fusion — Front Right (Passenger) |  |
| Best Quality Built to a higher standard if you want something more solid | moseiny 4-Pack ABS Wheel Speed Sensors for Ford Fusion (2010–2012) |  |
| Best Budget The cheapest option that still gets the job done reliably | Mteycei Rear Left ABS Wheel Speed Sensor for Ford Fusion / Lincoln MKZ / Mercury Milan |  |
| Most Sold A high-volume bestseller chosen again and again | NewYall ABS Wheel Speed Sensor – Front Left and Right Pair for Ford Fusion (2013–2019) |  |
| Best Value for Money The sweet spot between price and what you get | AUTOKAY Front ABS Wheel Speed Sensors, Pair for Ford Fusion and Lincoln MKZ |  |
| Best Overall The best all-around choice for most situations | TRQ Front Right ABS Wheel Speed Sensor (Passenger Side) |  |
1. A-Premium ABS Wheel Speed Sensor — Rear Right (Passenger) for Ford Fusion/MKZ/Milan
| Material | Acrylonitrile Butadiene Styrene |
|---|---|
| Mounting Type | Flange Mount |
| Output Type | Digital |
| Fitment | Rear Right, Passenger Side for specified models |
This A-Premium ABS wheel speed sensor is a direct replacement for the rear right (passenger) wheel on 2007–2012 Ford Fusion and Lincoln MKZ and 2007–2011 Mercury Milan AWD sedans. It senses wheel speed and sends a digital signal to the ABS control module to help maintain traction and stability. The sensor is molded from ABS plastic with a flange mount for straightforward bolt-in installation and includes the matching brackets seen in product images. In real-world use it restores wheel-speed feedback to the anti-lock and traction systems, which can clear warning lights and return normal ABS behavior. The practical benefits are simple: factory-style fitment, a stable output signal for fast response, and modest packaging that eases handling during installation. Limitations are typical for aftermarket sensors: plastic construction is cost-effective but not as robust as higher-end metal-bodied units, and proper electrical connector condition on the vehicle is required for a trouble-free fit and signal. For Fusion owners looking to replace a failed rear speed sensor, this is a practical, budget-conscious option with a one-year guarantee.
Best for: Ford Fusion owners who need a rear right wheel speed sensor to restore ABS and traction control on AWD sedans and prefer a direct-fit, budget-friendly replacement.
Less Ideal for: Drivers seeking the most heavy-duty or metal-bodied professional-grade sensor for extreme offroad or high-performance use should consider premium alternatives.
- Direct-fit replacement for rear right wheel on specified Ford Fusion, Lincoln MKZ, and Mercury Milan AWD models
- Digital output with stable signal and fast response to restore ABS/traction control function
- Flange-mount design and included brackets simplify installation
- Backed by a one-year unlimited-mileage guarantee from the brand
- ABS plastic housing is less impact-resistant than metal-bodied sensors
- Requires good condition of the vehicle side wiring and connector for reliable operation
Verdict A practical, direct-fit rear wheel speed sensor for Fusion owners that restores ABS function affordably but uses a plastic housing rather than a heavy-duty metal body.
2. A-Premium ABS Wheel Speed Sensor for Ford Fusion — Front Right (Passenger)
| Vehicle fitment | Ford Fusion 2013-2019 |
|---|---|
| Location | Front right passenger side |
| Maximum supply voltage | 12 Volts (DC) |
| Mounting type | Flange Mount |
This A-Premium ABS wheel speed sensor is a direct replacement for the front right (passenger) wheel on Ford Fusion models listed for 2013 through 2019. It measures wheel rotation and feeds that signal to the ABS/traction control system to clear fault codes and restore proper braking/ABS behavior. Installation is typical for a wheel speed sensor: remove the wheel, unbolt the old sensor, unplug the electrical connector, and fit the new flange-mount sensor into the hub. The unit is plastic-bodied, rated for 12 V systems, and sold with matching OEM reference numbers so you can confirm fitment. Buyers report the part often fits like the factory sensor and resolves warning lights quickly. Keep in mind this is an aftermarket replacement rather than a factory-branded sensor, so long-term durability may vary with driving conditions and installation care. Expect a straightforward swap that restores ABS function when the original sensor has failed, but plan to verify connector routing and mounting to avoid premature damage.
Best for: Ford Fusion owners who need an affordable, direct-replacement front right wheel speed sensor to clear ABS/traction-control faults and restore normal system operation.
Less Ideal for: Drivers seeking an OEM-branded sensor with a proven long-term track record or heavy-use fleet vehicles that demand maximum durability should consider dealer or premium aftermarket options instead.
- Direct fit for front right (passenger) wheel on specified Ford Fusion years
- Uses flange-mount design for straightforward replacement and OEM-style mounting
- Electrical output and 12 V compatibility match factory vehicle systems
- Includes manufacturer reference numbers to confirm correct vehicle fitment
- Several user reports of easy installation and symptom resolution
- Aftermarket construction may not match long-term longevity of factory parts
- Plastic body could be more vulnerable to impact or debris damage than metal-backed units
Verdict A practical, usually easy-to-install aftermarket front right ABS sensor for 2013–2019 Ford Fusion owners who want to clear ABS faults without replacing OEM parts.
3. moseiny 4-Pack ABS Wheel Speed Sensors for Ford Fusion (2010–2012)
| Fitment | Ford Fusion 2010-2012 |
|---|---|
| Quantity | 4 pieces |
| Material | Acrylonitrile Butadiene Styrene |
This 4-piece kit supplies left and right front and rear ABS wheel speed sensors intended to replace failed sensors on Ford Fusion 2010–2012 models. The sensors measure wheel rotational speed and send that data to the vehicle control module to keep the ABS and stability systems functioning. They are molded from ABS plastic with rubber grommets and come as a matched set so you can replace all four corners during one shop visit. In practice these sensors serve the common needs of restoring ABS warning lights, resolving intermittent traction control events, and preventing incorrect speedometer or braking behavior tied to faulty wheel speed inputs. Installation follows factory-style wheel mounting and electrical connector locations, so a mechanically competent DIYer or professional tech can swap them without vehicle modifications. Expect the benefit of a full-set replacement to remove sensor-related fault codes, but note these are aftermarket parts and may not match OEM fit or long-term durability in every environment. If the vehicle has wheel bearing or tone ring damage those components must be addressed separately for reliable sensor operation.
Best for: Owners or mechanics working on a Ford Fusion (2010–2012) who need a complete set of wheel speed sensors to clear ABS or traction control faults and return the systems to normal operation.
Less Ideal for: Drivers whose vehicles have damaged wheel bearings, tone rings, or wiring should repair those components first or seek a sensor that specifically matches heavy-duty OEM specifications.
- Includes all four wheel positions so sensors can be replaced together
- Made from ABS plastic with rubber grommets for basic durability and weather resistance
- Supplied to match common Ford Fusion sensor part numbers for direct replacement
- Restores ABS and traction control wheel speed input when sensors are the root cause
- Aftermarket construction may not equal factory-quality longevity in harsh conditions
- Does not address related failures such as damaged tone rings or wiring harness issues
Verdict A convenient four-piece aftermarket sensor kit that gets Ford Fusion ABS and traction systems back to working order quickly, with the caveat that long-term durability may vary from factory-quality parts.
4. Mteycei Rear Left ABS Wheel Speed Sensor for Ford Fusion / Lincoln MKZ / Mercury Milan
| Manufacturer Part Number | XFJ-5S10654-AB |
|---|---|
| OEM Part Number | 6E5Z2C187AA, AE5Z2C182C |
| Location | Rear Left |
| Compatibility | Ford Fusion, Lincoln MKZ, Mercury Milan (listed years) |
This Mteycei rear-left ABS wheel speed sensor is a direct-replacement part meant to restore proper wheel speed input to the anti-lock brake control module on compatible Ford Fusion, Lincoln MKZ, and Mercury Milan models. It is typically used to replace a failed or noisy sensor that triggers ABS warnings, traction control faults, or causes inconsistent ABS behavior. The sensor ships with installation hardware and a plug-and-play harness end to simplify swap-in replacement for a mechanic or knowledgeable DIYer. Built from manufacturer-stated durable materials and tested by quality control, it aims to meet factory-quality performance for everyday driving and braking systems. Practical benefits include straightforward fitment for the listed vehicles and the ability to clear ABS-related faults without replacing larger components. Limitations are that fitment is limited to specific model years and engine variants, and buyers should verify OEM part numbers and connector style before purchase since appearance alone does not guarantee compatibility.
Best for: Owners of the specified Ford Fusion, Lincoln MKZ, or Mercury Milan who need an affordable, direct replacement ABS wheel speed sensor to resolve ABS or traction control warnings.
Less Ideal for: Users who need a lifetime-guaranteed or brand-certified OEM sensor for fleet or performance applications should consider factory-quality alternatives.
- Direct rear-left replacement for listed Ford Fusion, Lincoln MKZ, and Mercury Milan models
- Includes installation hardware and a matching connector for easier swap-in replacement
- Manufacturer testing claimed to meet or exceed factory-quality performance
- Fitment restricted to specific years and engine configurations so verification is required
- No detailed lifespan or material specifications provided
Verdict A budget-friendly rear-left ABS speed sensor for indicated Ford Fusion-family vehicles that restores ABS function if you confirm exact fitment.
5. NewYall ABS Wheel Speed Sensor – Front Left and Right Pair for Ford Fusion (2013–2019)
| Material | Acrylonitrile Butadiene Styrene |
|---|---|
| Maximum Supply Voltage | 5 Volts (DC) |
| Measurement Accuracy | ±3% |
| Mounting Type | Flange Mount |
| Output Type | Digital |
These NewYall ABS wheel speed sensors come as a matched pair for the front left and right positions on Ford Fusion (2013–2019) and Lincoln MKZ (2013–2015). They are flange-mounted digital sensors intended to replace failed factory units and restore accurate wheel speed signals to the ABS, traction control, and parking aid systems. The sensors are made from ABS plastic, operate on a 5 V supply, and list a measurement accuracy of about ±3%, which is sufficient for routine anti-lock and stability functions. Installation is the typical bolt-and-plug swap used on most front-wheel speed sensor replacements and should be straightforward for a home mechanic with basic tools. Buyers can expect low-cost repairs and fast resolution of ABS or traction-control warning lights when the original sensor is the cause. Limitations include the plastic construction versus metal-bodied premium sensors and the lack of a listed warranty, so long-term durability in salt-prone climates may be less certain than higher-end replacements.
Best for: Ford Fusion owners who need an affordable, direct-replacement fix for front wheel speed sensor failures and want a simple DIY or shop install to clear ABS or traction-control warnings.
Less Ideal for: Drivers in areas with heavy road salt or off-road use who prefer heavy-duty, long-life metal sensors from premium brands should consider higher-end alternatives.
- Sold as a matched front left and right pair for one-step replacement
- Direct-fit flange mount designed for Ford Fusion 2013–2019 and Lincoln MKZ 2013–2015
- Digital output with factory-compatible 5 V supply for vehicle control modules
- Reasonable measurement accuracy (±3%) appropriate for ABS and traction control
- Plastic (ABS) construction may be less durable than metal-bodied aftermarket sensors
- No explicit warranty or service life listed in the product details
Verdict A budget-friendly matched front sensor pair that restores ABS and traction control function on Ford Fusion 2013–2019 but uses plastic construction that may not match premium durability.
6. AUTOKAY Front ABS Wheel Speed Sensors, Pair for Ford Fusion and Lincoln MKZ
| Fitment | Ford Fusion 2013-2019; Lincoln MKZ 2013-2015 |
|---|---|
| Package | Front left and right sensors (pair) |
| Connector | 2 pins |
| Fitment type | Direct Replacement |
These AUTOKAY sensors replace the front left and right wheel speed sensors on compatible Ford Fusion and Lincoln MKZ sedans and are sold as a matched pair with wiring harnesses included. They are intended for direct replacement use, so installation follows the factory sensor locations at the front driver and passenger sides. In practice the sensors restore wheel speed signals used by ABS and traction control after an original sensor fails, and including both sides avoids imbalance or error codes from swapping a new sensor to only one side. The listing cites multiple OEM part numbers for cross-reference and notes fitment across 2013–2019 Fusion engines and 2013–2015 MKZ engines. Practical benefits are straightforward fitment for common Fusion models and the convenience of a two-sensor kit with connectors and harnesses. Limitations are that fitment is confined to the specified Ford and Lincoln years and engines, and buyers should verify part-number cross-reference before purchase because exact connector orientation and mounting hardware can vary between submodels.
Best for: Owners of Ford Fusion or Lincoln MKZ who need to replace failed front wheel speed sensors and want a paired, plug-in replacement for both sides.
Less Ideal for: Drivers of vehicles outside the listed Fusion and MKZ years or engine options should look for sensors specifically matched to their model or consult a dealer for the correct part.
- Sold as a matched front left and right pair for consistent sensor readings
- Includes wiring harnesses and 2-pin connector for direct plug-in replacement
- Lists multiple OEM part numbers for cross-referencing fitment
- Targets common Ford Fusion and Lincoln MKZ model years so compatibility is clear
- Compatibility limited to the specific Ford Fusion and Lincoln MKZ years and engine variants listed
Verdict A practical, matched pair of front wheel speed sensors aimed at Ford Fusion and Lincoln MKZ owners who need a straightforward direct replacement.
7. TRQ Front Right ABS Wheel Speed Sensor (Passenger Side)
| Material | Acrylonitrile Butadiene Styrene |
|---|---|
| Mounting Type | Flange Mount |
| Manufacturer | TRQ |
| Model | TRQ BSA12789 ABS Wheel Speed Sensor |
This TRQ front right wheel speed sensor replaces the passenger-side ABS sensor on 2010–2012 Ford Fusion models and is built as a direct-fit factory-replacement. It arrives as a pre-assembled unit with the mounting flange and electrical connector in place, so installation simply requires removing the wheel, swapping the old sensor, and securing the harness and clips to the original routing. In real-world use the sensor restores proper wheel-speed input for the ABS and traction-control systems, clearing related error codes and stopping intermittent ABS activation when the original sensor has failed. The ABS sensor is made of durable ABS plastic with a machined exterior and matches common reference numbers used for this application. Some users note occasional quality-control variation on fitment or harness slack, so check wiring routing and connector engagement during install. For a DIY Fusion owner this offers an affordable, straightforward replacement that avoids hub disassembly when the original sensor is the fault, but take care to verify fit and routing before finishing the job.
Best for: Ford Fusion owners (2010–2012) who want an affordable, DIY-friendly replacement to restore ABS and traction control function.
Less Ideal for: Shops or owners seeking a factory-branded OEM sensor with guaranteed dealer support should consider dealer-sourced parts instead.
- Direct-fit design for 2010–2012 Ford Fusion passenger front position simplifies installation
- Pre-assembled mounting flange and connector reduce the need for modifications
- Matches common reference numbers for easy parts identification
- Constructed with machined exterior and durable ABS plastic for corrosion resistance
- Some reported fitment and harness slack variation that may require minor routing adjustments
- Quality control inconsistency reported by a minority of users
Verdict A budget-friendly, direct-fit replacement that restores ABS function on 2010–2012 Ford Fusion passenger front wheels, with occasional fitment variance to watch for.
Choosing the Right Ford Fusion ABS Wheel Speed Sensor: Key Factors to Consider
Fit and Connector Type
Sensors must match the Fusion's mounting points and electrical connector to avoid splicing or adapter use. A precise mechanical fit prevents stress on the sensor and ensures the correct air gap for accurate wheel-speed readings. Matching the connector also reduces installation time and potential electrical faults.
Signal Compatibility
The sensor must produce the right type of output for the ABS module, typically a digital pulse at a specific amplitude and frequency range. Incompatible signals can trigger warning lights or inconsistent ABS behavior. Check specifications for pulse type and wiring pinout to ensure proper communication with the vehicle computer.
Durability and Sealing
Wheel speed sensors sit in harsh environments exposed to water, road salt, and debris, so robust sealing and corrosion-resistant materials matter. A well-sealed sensor housing and high-quality cable sheathing reduce the risk of moisture ingress and electrical failure. Prioritizing durable construction can extend service intervals and reliability.
Mounting Hardware and Ease of Installation
Sensors that use common fasteners and come with appropriate clips or O-rings simplify installation and lower labor time. Some replacements are plug-and-play while others may need minor adjustments or new hardware. Considering mounting accessibility at the wheel hub helps you estimate installation difficulty and required tools.
Sensor Location: Front Vs Rear
Front and rear wheel speed sensors may differ in length, connector orientation, and mounting style, so confirm the required position before purchasing. Front sensors often have different exposure and cable routing than rear units. Choosing the correct location-specific sensor prevents fitment issues and ensures accurate ABS operation.
FAQ
How do I know if a wheel speed sensor on my Fusion is bad?
Common signs include an illuminated ABS warning light, inconsistent or pulsing brake feel under normal conditions, or a loss of traction control functions. You may also see diagnostic trouble codes indicating a sensor circuit fault. A visual inspection can reveal damaged wiring or corrosion, but confirming the issue often requires a scan tool or measuring the sensor output.
Can I replace a wheel speed sensor myself?
Many owners can perform the replacement with basic hand tools if the mounting area is accessible. Typical steps include lifting the vehicle, removing the wheel, unplugging the connector, and unbolting the sensor. Some installations need anti-seize on the mounting surface or a new mounting bolt, so follow proper torque and handling procedures. If wiring repairs or module diagnostics are required, professional help is advisable.
Do front and rear sensors differ on the Ford Fusion?
Yes, front and rear sensors can differ in cable length, connector orientation, and mounting style. Confirm the correct position-specific part to avoid fitment problems. Ordering the wrong location can lead to routing issues or an inability to reach the connector.
Will replacing the sensor clear the ABS light automatically?
Replacing a faulty sensor does not always clear the light by itself. The ABS control module often stores a fault code that needs to be cleared with a scan tool after the repair. In some cases the module will recognize the restored signal and clear the code after a driving cycle, but manual clearing ensures the system is reset.
What should I check if the new sensor still triggers a warning?
Verify connector seating, wiring continuity, and correct sensor orientation and air gap at the mounting surface. Inspect the tone ring or reluctor on the hub for damage, debris, or missing teeth, as the sensor needs a clean, undamaged target to generate accurate pulses. If electrical values look correct, a module-level issue or grounding problem may be present and may require diagnostic testing.
How We Chose the Best Ford Fusion ABS Wheel Speed Sensor
We prioritized parts engineered to match the Ford Fusion's factory fit, paying close attention to electrical connector type, sensor mounting geometry, and the sensor-to-hub air gap that affects signal accuracy. Durability was assessed through reported material quality and resistance features such as corrosion-resistant housings and sealed electronics to withstand wheel-end conditions. Installation factors included whether the sensor uses common fasteners, plug-and-play wiring, and accessible mounting locations that reduce labor time. Signal consistency and compatibility with the vehicle's ABS module were further filters, focusing on sensors that produce stable digital pulse output under varied wheel speeds. We excluded universal sensors lacking vehicle-specific fitment data and any options that require wiring modifications or fabricating mounts. The final list favors vehicle-specific replacement sensors that minimize installation complexity while restoring reliable ABS feedback.
Our full evaluation process is outlined in our review methodology.
Conclusion
When replacing a Ford Fusion ABS wheel speed sensor, prioritize correct fit and signal compatibility to restore reliable ABS feedback. Durable sealing and the right mounting hardware reduce the chance of early failure and make installation smoother. Balance ease of install against long-term durability and confirm whether you need a front or rear-specific unit before buying. Addressing these factors will minimize rework and help the ABS system perform as intended.
Explore all Ford Fusion parts & accessories.
