Note: This article contains affiliate links. If you click on these links and make a purchase, I may earn a small commission at no extra cost to you. This helps support my research and content. Read my full affiliate disclosure here.
If your Dodge Durango is showing ABS or traction warnings, choosing the right ABS wheel speed sensor can restore accurate wheel-speed data and stabilize braking intervention. You want a sensor that fits correctly, produces a clean signal, and holds up to road and weather conditions.This guide covers seven shortlisted ABS wheel speed sensors for the Dodge Durango chosen for their fitment reliability and signal performance. We evaluated mounting compatibility, electrical signal consistency, and build durability to help you find the right replacement. Read on for the selection rationale and what to look for when replacing the sensor.
Looking for other parts? See all Dodge Durango parts & accessories.
Top Picks at a Glance
| Best Reviewed A top-rated pick with lots of positive feedback | SCITOO Left/Right Rear ABS Wheel Speed Sensor for Dodge Durango |  |
| Most Popular A crowd favorite that many people choose with confidence | Dorman 970-024 Rear Center ABS Wheel Speed Sensor |  |
| Best Quality Built to a higher standard if you want something more solid | TRQ Rear ABS Wheel Speed Sensor Set (rear driver and passenger) |  |
| Best Budget The cheapest option that still gets the job done reliably | OCPTY ABS Wheel Speed Sensor — Front Left/Right for Dodge Durango & Jeep Grand Cherokee |  |
| Most Sold A high-volume bestseller chosen again and again | ROADFAR ABS Wheel Speed Sensor Kit (4pcs) for Dodge Durango / Jeep Grand Cherokee |  |
| Best Value for Money The sweet spot between price and what you get | A-Premium Front ABS Wheel Speed Sensor (Front Left or Right) |  |
| Best Overall The best all-around choice for most situations | A-Premium ABS Wheel Speed Sensor 2-Piece Set for Dodge Durango / Jeep Grand Cherokee |  |
1. SCITOO Left/Right Rear ABS Wheel Speed Sensor for Dodge Durango
| Compatible vehicles | 2011-2012, 2014-2015 Dodge Durango |
|---|---|
| Mounting type | Flange Mount |
| Output type | Electrical signal |
| Material | Acrylonitrile Butadiene Styrene |
This SCITOO rear ABS wheel speed sensor replaces a failed wheel speed signal sender on compatible Dodge Durango models and restores the input the brake control module needs for proper ABS and traction control operation. It is a single-piece sensor supplied with a flange mount and electrical connector that plugs into the factory harness, so installation is a straightforward swap at the wheel hub for technicians or experienced DIYers. The sensor is molded from ABS plastic and rated for high temperatures, which helps it withstand under-hood heat and road exposure. In practical use it will re-enable accurate wheel speed reporting, which prevents incorrect ABS activation and dashboard fault codes. Limitations to note are that this is an aftermarket unit rather than a factory-branded part and fitment must be confirmed for year and side before purchase, so buyers should verify compatibility with their Durango. The product is sold as one sensor only, not a pair, so plan accordingly if multiple sensors need replacement.
Best for: Reliability-focused buyers who prioritize restoring factory-like braking and ABS function on a Dodge Durango and prefer a durable, serviceable replacement part.
Less Ideal for: Buyers seeking a factory-branded original part or those who want a matched pair included should consider alternative sources or order two sensors.
- Direct-fit flange mount designed to plug into the factory harness for a simple swap
- High temperature rating improves durability under engine and brake heat
- Molded ABS construction resists corrosion and road contaminants
- Sold as a single sensor so you can replace only the failed unit
- Aftermarket part rather than factory-branded sensor which may differ slightly in materials or tolerances
- Only one sensor in the package so replacing both sides requires a second purchase
Verdict A practical, heat-rated aftermarket rear wheel speed sensor to restore ABS function on specified Dodge Durango years, sold individually for targeted repairs.
2. Dorman 970-024 Rear Center ABS Wheel Speed Sensor
| Material | Acrylonitrile Butadiene Styrene |
|---|---|
| Mounting Type | Flange Mount |
| Output Type | Digital |
| Upper Temperature Rating | 430 Degrees Fahrenheit |
This Dorman rear center ABS wheel speed sensor is a factory-style replacement intended to restore speedometer, cruise control, and ABS functions on compatible Dodge vehicles, including many Durango years listed for fitment. It installs in the differential area and uses a flange mount with factory-style electrical connectors so it plugs into the existing wiring harness without modification. The sensor is built from ABS plastic, has a tested fit-and-function design, and is marketed as durable for routine driving conditions. In practice it is a straightforward part for a DIY repair: remove the old sensor, seat the new flange-mounted unit, and reconnect the plug to clear ABS or speed-signal faults. Important limitations are that correct fit depends on confirming the exact Durango trim and year and that some users report connector orientation differences that may require careful routing or minor adapter wiring. This is a practical, low-complexity replacement for resolving speed-sensor related faults but not a performance upgrade or universal sensor solution.
Best for: Convenience-driven buyers who want a straightforward, do-it-yourself replacement to quickly restore ABS and speedometer function on a Dodge Durango without custom wiring or parts hunting.
Less Ideal for: Drivers looking for performance or sealed heavy-duty sensors for off-road or extreme-duty use should consider purpose-built aftermarket options instead.
- Direct replacement designed to match factory fit and function for listed Dodge models
- Factory-style electrical connector for plug-and-play installation
- Flange-mount design makes removal and installation straightforward for DIY repairs
- Durable, tested construction intended for long service life
- Fitment must be verified against exact Durango year and trim before purchase
- Connector orientation or minor differences may require attention during installation
Verdict A practical, plug-and-play rear center ABS speed sensor that restores factory speed and ABS function on compatible Dodge Durangos when fitment is confirmed.
3. TRQ Rear ABS Wheel Speed Sensor Set (rear driver and passenger)
| Material | Acrylonitrile Butadiene Styrene |
|---|---|
| Mounting Type | Flange Mount |
| Output Type | Push-Pull |
| Quantity | 2 Piece |
This TRQ two-piece rear wheel speed sensor set replaces the driver and passenger side ABS sensors on compatible Dodge Durango and Jeep Grand Cherokee models. Intended as direct-fit factory-quality replacements, the sensors come pre-assembled for a plug-and-play installation that usually avoids modifications and speeds up DIY or shop repairs. Typical use is restoring ABS, traction control, and speed-sensing functions after a failed sensor triggers warning lights or degraded system behavior. The kit lists multiple reference numbers for cross-reference and is made from ABS plastic with flange mounting and push-pull output connections. Practical benefits include straightforward installation, parts that match factory fitment patterns, and a vendor focus on DIY support with videos. Limitations are that the listing covers only rear sensors and fitment is limited to the specified years and models, so confirm vehicle compatibility before purchase; the material choice means it is not a heavy-duty aftermarket sensor for extreme off-road abuse.
Best for: Performance-oriented buyers seeking a high-quality, direct-fit replacement to restore ABS and traction control function quickly with minimal fuss.
Less Ideal for: Drivers who need front sensors, a heavy-duty off-road upgrade, or a sensor outside the listed Dodge Durango and Jeep Grand Cherokee model years should look elsewhere.
- Direct-fit two-piece kit for rear driver and passenger sides simplifies replacement
- Pre-assembled components enable plug-and-play installation and faster repairs
- Includes multiple reference part numbers for easy cross-referencing with vehicle service information
- Manufacturer provides DIY installation videos and support resources
- Only replaces rear wheel speed sensors so front-sensor failures are not addressed
- Constructed from ABS plastic which may be less robust than higher-grade materials in extreme conditions
Verdict A convenient, direct-fit rear ABS sensor kit aimed at restoring factory-like ABS performance quickly for the specified Durango and Grand Cherokee years.
4. OCPTY ABS Wheel Speed Sensor — Front Left/Right for Dodge Durango & Jeep Grand Cherokee
| Material | Acrylonitrile Butadiene Styrene, Metal |
|---|---|
| Mounting Type | Flange Mount |
| Output Type | Push-Pull |
| Measurement Accuracy | ±2% |
This OCPTY ABS wheel speed sensor is a direct-replacement front left or right sensor for specified Dodge Durango and Jeep Grand Cherokee models. It installs at the wheel hub to report rotational speed to the ABS and stability systems, helping prevent wheel lockup and preserving steering control during braking. The sensor uses a flange-mount design and push-pull output and is manufactured to mirror factory sensor geometry and function for straightforward fitment where compatible. Practical benefits include restoring ABS operation and direction stability at a low cost and a compact, factory-like form that tucks into the hub area without major modification. Limitations are that fitment is specific to certain model years and engine combinations, so you must verify part numbers and vehicle fit before ordering, and lower-cost aftermarket sensors can sometimes vary in long-term durability compared with higher-end replacements. Expect an economical option that gets the ABS system back working when matched to the correct vehicle application.
Best for: Budget-conscious buyers who need an affordable, practical replacement sensor to get ABS and stability systems functioning again on a qualifying Dodge Durango or Jeep Grand Cherokee.
Less Ideal for: Drivers seeking the longest-term durability or a premium OEM-level sensor should consider higher-tier brands or dealer parts instead.
- Direct-replacement design for front left or right positions on listed Durango and Grand Cherokee models
- Flange-mount format for straightforward installation at the wheel hub
- Push-pull output and factory-like structure to interface with existing ABS wiring
- Low-cost option for restoring ABS and stability functions quickly
- Compatibility limited to specific model years and engines so fitment checks are required
- Lower-cost aftermarket parts may not match long-term durability of premium replacements
Verdict A budget-friendly, factory-form replacement sensor that restores ABS function on compatible Durango and Grand Cherokee front hubs when proper fitment is confirmed.
5. ROADFAR ABS Wheel Speed Sensor Kit (4pcs) for Dodge Durango / Jeep Grand Cherokee
| Compatible models | 2011-2012, 2014-2015 Dodge Durango; 2011-2016 Jeep Grand Cherokee |
|---|---|
| Mounting type | Flange Mount |
| Output type | Push-Pull |
| Material | Acrylonitrile Butadiene Styrene |
| Upper temperature rating | 150 Degrees Celsius |
This ROADFAR kit supplies four ABS wheel speed sensors intended to replace failed factory sensors on Dodge Durango (2011-2012, 2014-2015) and Jeep Grand Cherokee (2011-2016). The sensors mount with a flange and use a push-pull output, so installation follows the same wiring and mounting points as the factory units. In use they feed wheel-speed data to the ABS/traction control system to prevent wheel lockup and help maintain steering control on slippery surfaces. The listing highlights OEM-style design and a high temperature rating for durability. Practical benefits are straightforward: a complete axle set for all four corners simplifies replacement and can clear ABS warnings when the fault is sensor-related. Limitations are that fitment is specific to the listed model years so you must confirm exact vehicle compatibility, and aftermarket sensors occasionally require careful connector and harness inspection during install to avoid fitment or signal issues compared with factory parts.
Best for: A risk-averse mainstream buyer who wants a full replacement set to restore ABS function without hunting individual sensors, prioritizing a straightforward, factory-style swap and peace of mind.
Less Ideal for: Not suited for owners who need an exact factory-branded sensor or who prefer dealer-supplied parts for warranty reasons; also avoid if your vehicle year is outside the listed fitment range.
- Complete four-sensor kit covers all wheels so you can replace the whole system at once
- Flange-mount design and push-pull output match factory mounting style for straightforward installation
- Manufacturer claims factory-quality design and higher temperature tolerance for longer service life
- Compatibility limited to specific Durango and Grand Cherokee model years so verification is required before purchase
- Aftermarket connectors and tolerances can require extra attention during installation to ensure reliable signal and fit
Verdict A convenient four-sensor aftermarket kit for restoring ABS function on the listed Durango and Grand Cherokee years, but confirm fitment and connector compatibility before installing.
6. A-Premium Front ABS Wheel Speed Sensor (Front Left or Right)
| Compatible Vehicles | Dodge Durango 2016-2017; Jeep Grand Cherokee 2016-2020 (without adaptive cruise control) |
|---|---|
| Connector Pins | 2 Pins |
| Location | Front driver or passenger side |
| Mounting Type | Flange Mount |
This A-Premium front ABS wheel speed sensor is a direct-fit replacement for the front left or right position on select Dodge Durango and Jeep Grand Cherokee models that do not have adaptive cruise control. It connects via a 2-pin connector and installs in the flange mount location where the factory sensor sits, so installation is typically straightforward for a DIYer or technician. The sensor provides the same wheel speed signal the vehicle’s ABS and traction systems need, helping clear fault codes and restoring proper brake and stability operation. Notable features include a factory-replacement reference number match and a one-year unlimited-mileage guarantee from the maker. Practical benefits are easy fitment, restoring vehicle systems without additional programming, and a lower cost than many OEM replacements. Limitations are that it is only for front positions and explicitly excludes vehicles equipped with adaptive cruise control, so buyers must confirm exact vehicle options before purchasing.
Best for: Practical optimizers seeking a budget-conscious, factory-replacement sensor to restore ABS and traction system function without paying OEM prices or chasing advanced diagnostics.
Less Ideal for: Drivers who need sensors for vehicles with adaptive cruise control or those who prefer to only buy dealer-sourced factory-brand parts should consider alternatives.
- Direct-fit front left or right replacement for specified Dodge Durango and Jeep Grand Cherokee models
- Matches factory reference numbers for straightforward compatibility checks
- 2-pin connector and flange-mount design for simple installation without modification
- Backed by a one-year unlimited-mileage guarantee from the manufacturer
- Not compatible with vehicles equipped with adaptive cruise control
- Only available as a single sensor for one wheel, so dual replacements require buying two units
Verdict A cost-effective, direct-fit front wheel speed sensor for non-adaptive-cruise Dodge Durango and Grand Cherokee models that restores ABS/traction function without the OEM price.
7. A-Premium ABS Wheel Speed Sensor 2-Piece Set for Dodge Durango / Jeep Grand Cherokee
| Compatible Vehicles | Dodge Durango 2011-2014; Jeep Grand Cherokee 2011-2014 |
|---|---|
| Connector Pins | 2 Pins |
| Mounting Type | Flange Mount |
| Output Type | NPN, PNP, Push-Pull |
| Package Quantity | Pack of 2 |
This A-Premium two-piece ABS wheel speed sensor set is a direct replacement option intended for front or rear left/right fitment on specified 2011–2014 Dodge Durango and 2011–2014 Jeep Grand Cherokee applications. It transmits wheel speed signals to the vehicle ABS module via a two-pin connector and is offered as a flange-mount sensor in an ABS plastic housing. In everyday use it behaves like a standard replacement sensor: plug it into the stock wiring harness, mount it at the wheel knuckle, and the ABS and traction control systems regain accurate speed inputs. Notable points include multi-output compatibility listed as NPN, PNP, and push-pull and a manufacturer one-year unlimited-mileage guarantee. Limitations: some buyers reported connector fit or compatibility issues with certain submodels such as adaptive cruise variants, so confirm exact part cross-references before installation. If the connector and sensor geometry match your Durango, it provides a budget-friendly factory-style replacement; if not, you may need a different part or dealer verification.
Best for: Balanced all-round buyers who want a cost-conscious, factory-style replacement sensor to restore ABS and traction control functionality on compatible Durango or Grand Cherokee vehicles.
Less Ideal for: Drivers with nonstandard submodels such as adaptive cruise packages or unclear OEM part numbers should avoid assuming fitment and consult dealer parts data or choose a verified OEM supplier instead.
- Sold as a two-piece set for replacing both sides at once
- Listed to directly replace factory sensor part numbers for targeted Dodge and Jeep model years
- Flange-mount design and two-pin connector allow straightforward installation with stock mounting points
- Supports common output types (NPN, PNP, push-pull) for broad electrical compatibility
- Some reviews report connector or fitment problems on specific submodels, so not guaranteed to fit every variant
- Made from ABS plastic which may be less durable than metal-bodied sensors in high-heat or high-debris environments
Verdict A practical, budget-friendly factory-style replacement for listed Durango and Grand Cherokee years but verify exact submodel fitment before buying.
Choosing the Right Dodge Durango ABS Wheel Speed Sensor: Key Factors to Consider
Fitment and Mounting Compatibility
Correct mechanical fit is the foundation of a successful sensor replacement. A sensor that matches the Durango's mounting points and bracket geometry avoids stress on the sensor body and connector, which can cause premature failure.
Improper fit can alter the sensor-to-reluctor gap, affecting signal amplitude and causing erratic ABS behavior. Look for sensors that replicate OEM mounting orientation and include proper grommets or seals to maintain position under vibration.
Electrical Signal Consistency
The ABS control module relies on a stable voltage or frequency signal from the wheel speed sensor. Variations or noise in the signal can trigger fault codes or incorrect ABS modulation during braking.
Evaluate sensors for clean signal output across a range of rotational speeds, including low-speed startup and higher highway rotation. Sensors designed to minimize electrical noise and maintain signal integrity under load will reduce false ABS alerts and improve diagnostic confidence.
Connector and Wiring Quality
A robust connector and properly routed wiring harness reduce the chance of intermittent faults. Connectors should lock securely, resist corrosion, and fit the vehicle harness without stress.
Wiring insulation needs to withstand heat, oils, and abrasion from suspension movement. Sensors with strain relief features and reinforced harness jackets are less likely to suffer chafing or broken conductors that cause intermittent ABS faults.
Environmental and Corrosion Resistance
Wheel speed sensors are exposed to water, road salts, and debris, so corrosion resistance is critical for long-term reliability. Materials and seals that resist moisture ingress help maintain both mechanical and electrical integrity.
Consider sensors with sealed housings, corrosion-resistant terminals, and protective coatings. Robust sealing also prevents debris accumulation at the sensing face, which can change the effective air gap and skew readings over time.
Durability Under Vibration and Impact
The undercarriage environment subjects sensors to constant vibration and occasional impact. Durable internal components and secure mounting reduce the risk of fatigue failure.
Sensors engineered to absorb or isolate vibration maintain calibration longer. Look for designs tested for shock and vibration that minimize the chance of brittle fractures or internal connector loosening.
Ease of Installation and Serviceability
Installation ease matters for both DIYers and technicians. A sensor that installs without major disassembly or special tools shortens downtime and reduces the chance of installation errors.
Features like accessible mounting screws, clear connector orientation, and included replacement grommets speed the process. Consider how simple it will be to perform a wiring continuity check or replace the sensor again in the future if needed.
FAQ
What are common symptoms of a failing Dodge Durango ABS wheel speed sensor?
Common signs include the ABS warning light or traction control alert illuminating, inconsistent speedometer readings, or unusual ABS behavior during braking. You might also notice intermittent warnings that come and go with vibration or weather changes. These symptoms often indicate a sensor signal issue rather than a hydraulic braking fault.
Where is the ABS wheel speed sensor located on the Dodge Durango?
The wheel speed sensor is mounted near the wheel hub or steering knuckle at each wheel, typically positioned to read a tone ring or reluctor on the hub. Exact placement depends on front or rear mounting but will be adjacent to the wheel bearing assembly where it can sense rotational speed.
Can I perform an ABS sensor wiring test myself?
You can perform basic checks like inspecting the connector for corrosion and measuring continuity of the harness with a multimeter. Testing the sensor signal while spinning the wheel or using a scope provides more conclusive data. If you are unsure about electrical diagnostics, a trained technician can perform accurate signal and wiring checks.
Will an ABS sensor fault always trigger a diagnostic trouble code like P0500?
Not always, but a faulty wheel speed sensor or its wiring often results in codes related to vehicle speed sensor inputs. P0500 is one possible code tied to vehicle speed sensor issues, but ABS-specific modules may log different fault codes. Intermittent wiring faults can sometimes produce intermittent or multiple related codes.
Should I choose OEM or aftermarket wheel speed sensor replacements?
Both OEM and reputable aftermarket sensors can restore proper function, but the best choice depends on fitment, signal quality, and build durability. Prioritize sensors that match the Durango's connector and mounting, and that provide stable signal characteristics rather than focusing solely on origin.
How do I diagnose if the sensor itself is faulty versus wiring or module issues?
Start by visually inspecting the connector and wiring for damage or corrosion, then check wiring continuity and resistance. If the harness checks out, test the sensor output signal while the wheel is rotated to confirm consistent voltage or frequency. Persistent signal absence or erratic output after wiring verification points to a sensor fault.
How We Chose the Best Dodge Durango ABS Wheel Speed Sensor
We prioritized sensors that offer correct mechanical fitment and consistent electrical output for the Dodge Durango, since accurate wheel-speed data is essential for ABS and stability systems. Key evaluation criteria included connector and mounting match, voltage and frequency signal stability under simulated wheel speeds, corrosion and moisture resistance, and expected durability against road debris and temperature cycles. We also considered ease of installation for technicians, availability of reliable replacement connectors, and whether the sensor wiring harness design reduced strain or chafing risks.We excluded units lacking clear fitment documentation or those with evidence of inconsistent signal reporting in real-world use. Units that required substantial vehicle modification or nonstandard adapters were also filtered out. The final shortlist focuses on sensors that minimize diagnostic false positives and support straightforward installation and long-term reliability.
Our full evaluation process is outlined in our review methodology.
Conclusion
When replacing a Dodge Durango ABS wheel speed sensor, prioritize correct fitment and stable electrical output to ensure reliable ABS and traction control operation. Durable connectors, robust wiring, and environmental sealing reduce the chance of repeat failures.Expect tradeoffs between ease of installation and long-term robustness. Focus on sensors that match the Durango's mounting and connector, deliver clean signals across speed ranges, and offer protection against moisture and vibration for the best long-term outcome.
Explore More:
- Check out all Dodge Durango parts & accessories
- Explore ABS Wheel Speed Sensors Maintenance & Repair Guides
- Explore Electrical System
- Browse all Auto Parts
