Note: This article contains affiliate links. If you click on these links and make a purchase, I may earn a small commission at no extra cost to you. This helps support my research and content. Read my full affiliate disclaimer here.
If your Chrysler Town & Country is showing ABS or traction-control issues, installing the correct wheel speed sensor matters for reliable braking and stability. You want a sensor that fits precisely, provides accurate speed signals, and holds up in wet, salty, and dirty conditions. This guide covers the top shortlisted options for Chrysler Town & Country ABS wheel speed sensor replacements. We evaluated candidates on electrical signal accuracy, fitment, and long-term durability to help you pick the right replacement. Read on for what to prioritize and how to check common fault symptoms before you buy.
Looking for other parts? See all Chrysler Town & Country parts & accessories.
Top Picks at a Glance
| Best Reviewed A top-rated pick with lots of positive feedback | MotorbyMotor Front Wheel Speed ABS Sensor — 2-Pack |  |
| Most Popular A crowd favorite that many people choose with confidence | A-Premium Rear ABS Wheel Speed Sensor for Chrysler Town & Country (Rear, Driver or Passenger) |  |
| Best Quality Built to a higher standard if you want something more solid | A-Premium ABS Wheel Speed Sensor (Rear, Pack of 2) for Chrysler/Dodge/Ram 3.6L |  |
| Best Budget The cheapest option that still gets the job done reliably | AOTPAT Rear ABS Wheel Speed Sensor for Chrysler Town & Country 3.6L (Rear Left or Right) |  |
| Most Sold A high-volume bestseller chosen again and again | ECCPP ABS Wheel Speed Sensor Set of 4 (Front/Rear Left/Right) |  |
| Best Value for Money The sweet spot between price and what you get | Geekstop Rear ABS Wheel Speed Sensors (2-pack) |  |
| Best Overall The best all-around choice for most situations | TRQ Rear ABS Wheel Speed Sensor (BSA15989) |  |
1. MotorbyMotor Front Wheel Speed ABS Sensor — 2-Pack
| Application | Front Left and Right |
|---|---|
| Upper Temperature Rating | 150 Degrees Celsius |
| Mounting Type | Flange Mount |
| Output Type | Push-Pull |
| Material Type | Acrylonitrile Butadiene Styrene |
This two-pack of front wheel speed sensors from MotorbyMotor is a plug-and-play replacement intended for Chrysler Town & Country (2008–2016) and compatible sibling models. Each sensor includes the connector and mounting hardware for straightforward installation and is made from ABS plastic with claimed resistance to salt and water intrusion. In use the sensors restore wheel-speed input to the ABS and traction systems, which clears warning lights and returns normal braking and stability behavior when an original sensor has failed. Practical benefits include receiving both left and right front sensors together and the supplied screws and shims that simplify a same-day repair. Limitations are that the part number fitment is specific to certain hub assemblies so you must confirm compatibility with the 513273/515136 interchange numbers before ordering, and long-term durability depends on local road and winter conditions despite the weather-resistant construction.
Best for: Reliability-focused owners who prioritize restoring factory braking and stability systems with a straightforward, low-hassle replacement that aims to match factory performance.
Less Ideal for: Buyers who need parts for other vehicle models or those who prefer OEM-branded sensors and factory-sourced components should consider alternative options.
- Sold as a matched left/right pair for one-step repair
- Includes connector, screws and shims for easier installation
- Designed to resist water and road salt to reduce premature failure
- Made to fit specific Chrysler Town & Country front hub assemblies for straightforward replacement
- Compatibility limited to vehicles that use the listed interchange part numbers and hub assemblies
Verdict A practical, weather-resistant matched pair for restoring ABS wheel-speed function on compatible Chrysler Town & Country models, provided you verify hub/part-number fitment.
2. A-Premium Rear ABS Wheel Speed Sensor for Chrysler Town & Country (Rear, Driver or Passenger)
| Maximum Supply Voltage | 12 Volts |
|---|---|
| Output Type | Push-Pull |
| Mounting Type | Flange Mount |
| Upper Temperature Rating | 150 Degrees Celsius |
This A-Premium rear ABS wheel speed sensor replaces the rear driver or passenger side sensor on Chrysler Town & Country vans with the 3.6L engine. It installs as a flange-mount, push-pull output sensor and is used to feed wheel speed data to the vehicle ABS and traction control systems. Key features listed include 12 volt compatibility, measurement accuracy similar to the factory sensor, an upper temperature rating of 150 C, and an ABS-friendly ABS-style housing made from ABS plastic. In practice the sensor functions as a direct replacement, clearing wheel-speed related dash warnings and restoring normal ABS/traction behavior when the original sensor fails. The practical benefits are straightforward: simple swap-in fitment, factory-like electrical output, and a one-year parts guarantee. Limitations are that it is sold as a single unit so you may need two for axle replacement and the plastic housing and generic harness may not match OEM weatherproofing or connector details in every installation, so minor wiring or bracket adjustments could be required in older vehicles.
Best for: Buyers who prioritize convenience and a quick, straightforward fix for a faulty rear wheel speed sensor on a Chrysler Town & Country and want a ready-made replacement to restore ABS and traction function.
Less Ideal for: Owners seeking OEM-sourced parts for long-term factory-identical fit and finish or those who prefer to replace both sensors at once as routine maintenance.
- Direct-fit flange-mount design for rear driver or passenger position on compatible Town & Country models
- Electrical output described as push-pull and rated for 12 V systems, matching vehicle electronics
- Measurement accuracy claimed to be similar to factory sensor, helping maintain ABS and traction control performance
- Upper temperature rating of 150 C for operation under high-heat conditions
- Sold as a single sensor rather than an axle pair
- Housing and connector are aftermarket ABS plastic which may not match factory weatherproofing or harness routing exactly
Verdict A practical, convenience-focused direct-replacement rear ABS sensor that restores ABS function quickly, though it is sold singly and uses aftermarket housing materials.
3. A-Premium ABS Wheel Speed Sensor (Rear, Pack of 2) for Chrysler/Dodge/Ram 3.6L
| Measurement Accuracy | ±1.5% |
|---|---|
| Mounting Type | Flange Mount |
| Output Type | Push-Pull |
| Connector Pins | 2 Pins |
| Material Type | Acrylonitrile Butadiene Styrene |
This A-Premium kit supplies two rear wheel speed sensors intended as direct replacement parts for Chrysler Town & Country, Dodge Grand Caravan, and Ram C/V models with the 3.6L V6. The sensors transmit wheel speed to the vehicle ABS control module and are flange-mounted with a push-pull output for a fast, stable signal. They are 100 percent new components manufactured from ABS plastic and claim measurement accuracy of ±1.5% with factory-style connector pins to match the vehicle harness. In practice these install like a factory-quality replacement and clear ABS/traction faults when the original sensor has failed or the harness is repaired. The pack-of-two format saves time when both sides need attention. Limitations include plastic construction instead of metal housings that may be less robust in extremely corrosive environments and the product relies on correct fitment to the listed model years and engine; wiring harness damage or misdiagnosis can still cause driveability codes after installation.
Best for: Performance-oriented owners who prioritize precise, factory-style wheel speed feedback and want a ready-to-install replacement to restore ABS and traction control function on a Town & Country or the specified Dodge and Ram models.
Less Ideal for: Buyers seeking heavy-duty aftermarket sensors for offroad or corrosive environments should consider more rugged metal-housed alternatives or professional diagnostic services for wiring issues.
- Designed as direct replacement for rear left and right on listed Chrysler, Dodge, and Ram 3.6L models
- Pack of two provides both rear sensors for a complete axle service
- Claims ±1.5% measurement accuracy for reliable wheel speed reporting
- Factory-style 2-pin connector and flange mount for straightforward installation
- Acrylonitrile butadiene styrene housing may be less durable than metal in harsh conditions
- Fitment limited to specific model years and the 3.6L V6 so compatibility must be checked
Verdict A factory-style, performance-oriented replacement sensor pair that restores reliable ABS wheel-speed signals for the specified Chrysler Town & Country and matching Dodge and Ram models, with the caveat that its plastic housing is less heavy-duty than metal options.
4. AOTPAT Rear ABS Wheel Speed Sensor for Chrysler Town & Country 3.6L (Rear Left or Right)
| Mounting Type | Flange Mount |
|---|---|
| Specific Uses For Product | Enhance Driver Control, Improve Braking Stability, Increase Safety, Prevent Wheel Lock-Up, Reduce Stopping Distance |
| Material Type | Acrylonitrile Butadiene Styrene |
| Location | Rear Left or Right |
This AOTPAT rear ABS wheel speed sensor is a direct-fit replacement intended for the 3.6L Chrysler Town & Country (2012–2013) and the listed Dodge Grand Caravan and RAM C/V applications. It mounts using the flange-style bracket and plugs into the factory wiring to restore wheel-speed input to the ABS/traction systems. The sensor is molded from ABS plastic and shipped in protective packaging; the listing states manufacturing and quality checks in certified facilities and offers a two-year unlimited-mileage warranty. In practice this part gives a low-cost way to clear ABS warning lights, recover proper ABS function, and improve braking stability on slippery surfaces when the original sensor fails. Limitations are typical of budget replacements: longevity may vary with road and environmental conditions and buyers should verify the confirmed-fit tool before ordering to ensure correct connector and mounting orientation. For routine roadside replacements or budget repair jobs this sensor is a practical option, but technicians wanting an exact factory-spec match may prefer a higher-end or OEM-sourced unit.
Best for: Budget-conscious buyers looking for an affordable, serviceable sensor to restore ABS function on a Chrysler Town & Country 3.6L and get the vehicle back on the road without a large parts expense.
Less Ideal for: Drivers seeking an exact factory-quality replacement for long-term OEM parity or professional shops that prioritize manufacturer-branded parts should consider OEM alternatives.
- Direct-fit flange mount for rear left or right installation on specified 3.6L models
- Manufactured in facilities with ISO/IEC:17025:2017 quality checks
- Ships with protective packaging to reduce transit damage
- Two-year unlimited-mileage warranty included
- Made from ABS plastic which may not match the durability of higher-end materials
- Fitment must be double-checked against the vehicle confirmation tool to avoid ordering the wrong side or connector
Verdict A low-cost, direct-fit rear ABS sensor that restores ABS function on 3.6L Chrysler Town & Country models but may not match long-term durability of premium or OEM parts.
5. ECCPP ABS Wheel Speed Sensor Set of 4 (Front/Rear Left/Right)
| Mounting Type | Flange Mount |
|---|---|
| Output Type | electrical signal |
| Specific Uses For Product | Speed,Wheel Speed |
| Material Type | Acrylonitrile Butadiene Styrene |
This ECCPP four-piece ABS wheel speed sensor set replaces the front and rear left/right sensors to restore wheel-speed input to the vehicle control modules. Designed as flange-mount electrical sensors, they read wheel rotation and send that signal to the braking and stability systems so ABS, traction control, and speed-dependent features operate correctly. Typical use is straightforward swap-out replacement when a failed sensor triggers an ABS or traction fault code or when intermittent speed readings are observed. The set is made from ABS plastic and matches common mounting and electrical output conventions for factory replacement sensors, which keeps installation relatively simple for a mechanically competent DIYer or a shop. Practical benefits include replacing all four corners at once to eliminate recurring fault codes and ensure consistent sensor behavior across the vehicle. Limitations are that this is an aftermarket part rather than a factory-branded sensor and fitment must be confirmed against the Town & Country year and trim level before purchase; buyers may still need to swap connectors or mounting clips during installation.
Best for: Risk-averse mainstream buyers who prioritize restoring reliable brake and stability system operation on their Chrysler Town & Country without experimenting with single-piece fixes.
Less Ideal for: Those seeking an exact factory-branded sensor or professional restorers who require OEM-sourced components for original-spec authenticity.
- Set includes four sensors to replace front and rear left/right positions in one job
- Flange-mount design matches common factory mounting points for straightforward installation
- Transmits electrical wheel-speed signal needed for ABS and stability systems to function
- Full-set replacement helps eliminate mismatched sensor behavior that can trigger codes
- Aftermarket unit so material and long-term durability may differ from factory-quality sensors
- May require minor connector or clip changes during installation for some Town & Country model years
Verdict A practical four-sensor aftermarket replacement to restore ABS wheel-speed input on the Chrysler Town & Country, best when you want to replace all corners at once rather than chase individual failures.
6. Geekstop Rear ABS Wheel Speed Sensors (2-pack)
| Maximum Supply Voltage | 12 Volts |
|---|---|
| Output Type | Digital |
| Mounting Type | Plug Mount |
| Upper Temperature Rating | 250 Degrees Celsius |
| Specific Uses For Product | ABS wheel speed sensor prevents wheel lock-up during braking. |
These Geekstop rear ABS wheel speed sensors replace the factory rear left and right sensors on compatible Town & Country model years. They detect wheel rotational speed digitally and feed that information to the vehicle ABS and traction systems, which can clear an ABS light and restore proper brake and traction control behavior. The kit is sold as a pair and uses plug-mount connectors for a direct install that typically requires basic hand tools and about 30–60 minutes per side depending on access. Notable features from the listing include a 12 V supply rating, digital output, high temperature tolerance up to 250 C, and claims of anti-corrosion and reinforced construction. Practical benefits are straightforward fitment, paired replacement to avoid mixing old and new sensors, and materials intended for longevity in harsh underbody conditions. Limitations are that vehicle diagnostics may still be needed if wiring or the ABS module has underlying faults, and plug-and-play fit depends on matching your Town & Country wiring harness and retaining clips exactly.
Best for: Practical optimizers looking to restore ABS and traction function on a Town & Country without paying dealer prices, prioritizing straightforward parts replacement and reliable day-to-day performance.
Less Ideal for: Drivers who want a plug-and-play guaranteed OEM remanufactured part backed by dealer diagnostics or those needing a comprehensive electrical repair rather than sensor replacement.
- Sold as a pair for left and right rear replacement so both sides are refreshed at once.
- Plug-mount design intended for direct swap into factory harness without splicing.
- Digital output and 12 V compatibility align with modern vehicle electrical systems.
- High upper temperature rating and corrosion-resistant materials improve durability in underbody conditions.
- Fit and connector clip compatibility can vary by vehicle condition so installation may require minor bracket or clip adjustments.
- Listing claims about materials and testing are vendor statements that are not independently verified in the product page.
- Does not diagnose or repair issues caused by damaged wiring or ABS control module faults.
Verdict A budget-friendly pair of rear sensors that offer direct-replacement fit and durability claims to get a Chrysler Town & Country back to normal ABS and traction operation without dealer cost.
7. TRQ Rear ABS Wheel Speed Sensor (BSA15989)
| Mounting Type | Flange Mount |
|---|---|
| Output Type | Push-Pull |
| Specific Uses For Product | automotive |
| Material Type | Acrylonitrile Butadiene Styrene |
This TRQ rear ABS wheel speed sensor replaces the factory sensor on compatible Chrysler Town & Country and Dodge Caravan/Grand Caravan rear positions to restore accurate wheel-speed signals for the ABS and traction-control systems. It arrives as a pre-assembled unit with the flange-mount design and push-pull output for simple bolt-in installation and factory-style routing of the wiring and clips. The sensor uses a durable ABS housing and includes grommets and harness clips so you typically only need basic hand tools to swap it with the old part. In practice it clears speed-sensor fault codes and stops intermittent ABS or traction activations when the sensor is the cause. Some buyers report excellent value and fit while others found the OEM part worked better in a few cases, so results can vary with vehicle condition and exact circuit faults. If you want a cost-effective, ready-to-install replacement and are comfortable with a DIY wheel removal and sensor change, this is a practical option. If the underlying wiring or module has issues, replacing the sensor alone may not fix the fault.
Best for: Buyers who want a balanced, practical replacement that restores ABS/traction function at a lower cost than dealer parts and who are comfortable doing a wheel-level DIY repair or supervising a shop install.
Less Ideal for: Drivers who prefer to avoid any risk and want guaranteed dealership-sourced parts or those unwilling to diagnose potential wiring or module problems beyond the sensor itself.
- Direct-fit pre-assembled unit eases installation and preserves factory routing
- Includes grommets and harness clips for secure attachment
- Flange-mount design with push-pull output matches common factory sensor interfaces
- ABS housing material resists road exposure and typical wear
- Extensive compatibility listing for specific Chrysler/Dodge rear positions
- Not guaranteed to resolve faults caused by wiring, connectors, or ABS module issues
- Some customers reported fitment or function differences versus the dealership sensor
Verdict A cost-effective, direct-fit rear ABS wheel speed sensor that restores wheel-speed signals for compatible Chrysler/Dodge vans, with good DIY install convenience but variable results if other circuit issues exist.
Choosing the Right Chrysler Town & Country ABS Wheel Speed Sensor: Key Factors to Consider
Fitment and Connector Compatibility
Correct mechanical fit and an exact-matching electrical connector matter because even small differences can prevent proper installation or cause intermittent signals. A sensor that lines up with factory mounting points reduces the risk of seal failure and wheel bearing interference.
Connector compatibility matters to ensure proper mating with the vehicle harness and to avoid splicing or adapter use, which can introduce failure points. Confirm whether the sensor is specified for front or rear axle applications and check the mounting bolt pattern and bracket clearance before purchase.
Signal Accuracy and Output Type
Wheel speed sensors provide the ABS module with precise pulse or voltage signals; the sensor output must match the expected signal type and frequency range. Sensors with stable, noise-free signals lead to more reliable ABS and traction-control responses and fewer false fault codes.
Pay attention to stated electrical characteristics like impedance, voltage range, and pulse profile if provided. A sensor that generates a clean waveform even at low rotational speeds improves low-speed braking and parking stability.
Durability and Environmental Resistance
These sensors operate close to moving parts and road contaminants, so resistance to water intrusion, road salt, and mechanical shock matters for longevity. Materials and sealing methods that prevent corrosion and keep contaminants away from the sensing element reduce premature failures.
Look for sensors with robust housings, corrosion-resistant terminals, and protected wiring. Boots and grommets that maintain a tight seal at the mounting point help preserve performance in wet or winter conditions.
Wiring Harness and Strain Relief
The sensor wiring and how it is routed to the vehicle harness contribute heavily to long-term reliability. Strain relief prevents wire chafing and connector stress from suspension movement and steering articulation.
Ensure the harness length and routing match the Town & Country layout so wires do not rub against sharp edges or hot components. Reinforced sheathing and proper clips or retainers reduce the chance of wiring damage that can mimic sensor failure.
Compatibility With Vehicle Diagnostics
A replacement sensor should allow the vehicle to report accurate rotational speed readings and not generate intermittent ABS fault codes. Compatibility with the Town & Country's ABS module and OBD-II diagnostics ensures meaningful live data during troubleshooting.
Choose sensors that restore normal diagnostic readings and enable consistent wheel-speed outputs across all four corners. This simplifies fault isolation and reduces time spent chasing spurious codes that do not originate from the ABS module itself.
Installation Ease and Serviceability
Sensors that are straightforward to install reduce labor time and the chance of installation errors. Clear mounting hardware, accessible connectors, and service-friendly design elements help both professional technicians and competent DIYers.
Consider whether the part requires special tools or torque specifications, and whether seals or clips are included. Parts that allow simple replacement without disturbing adjacent components minimize the risk of creating new issues during installation.
FAQ
What are common ABS sensor symptoms on a Chrysler Town & Country?
Common signs include an illuminated ABS warning light, intermittent traction-control warnings, or erratic speedometer and cruise-control behavior. You may also notice ABS activation when not needed, or loss of ABS function under braking. These symptoms often vary with speed and wheel direction.
Where is the ABS wheel speed sensor located on a Chrysler Town & Country?
On the Town & Country, wheel speed sensors are mounted at each wheel hub or knuckle near the tone ring or reluctor. Front sensors are typically on the steering knuckle, while rear sensors are mounted at the rear hub assembly. Exact location depends on model year and axle design.
How can I diagnose an ABS sensor fault before replacing it?
Start with a visual inspection of the sensor, wiring, and connector for corrosion, damage, or loose clips. Use a multimeter or oscilloscope to check for expected resistance or a clean pulse signal while rotating the wheel. Scan for diagnostic trouble codes that point to a specific wheel or circuit.
Can I replace a wheel speed sensor myself?
Many owners can replace a sensor with basic hand tools and lifting equipment, but procedures vary by axle and year. Plan for wheel and hub access, and follow correct torque values and sealing practices. If wiring requires repair or access is restricted, professional service may be advisable.
Will replacing the sensor clear ABS codes like P0500?
Replacing a faulty sensor can resolve wheel-speed related codes, but codes are often set by the control module and may persist until cleared with a scan tool. It is also important to confirm the new sensor produces correct signals and that wiring and grounds are intact before assuming the sensor alone is the cause.
Should I choose OEM or aftermarket wheel speed sensors?
Both OEM-equivalent and quality aftermarket sensors can restore function, but focus on fitment, electrical specs, and build quality rather than brand alone. Verify that the part matches the Town & Country's connector and mounting requirements, and check corrosion protection and warranty terms when available.
How We Chose the Best Chrysler Town & Country ABS Wheel Speed Sensor
We focused on components specific to the Chrysler Town & Country that restore ABS and traction-control function without requiring vehicle modifications. Key evaluation criteria included: fitment accuracy to factory mounting points and connector types; electrical signal stability under varying speeds and loads; resistance to moisture, salt, and road debris; connector and harness durability; and returnability to factory-level sensor timing so ABS module calibration is unaffected. We also considered ease of installation for technicians and DIYers, plus the availability of replacement mounting hardware and seals. We excluded items that required additional electronic modules, universal sensors without vehicle-specific adapters, and parts lacking clear electrical specifications. Our filters prioritized parts that match the Town & Country's factory sensor footprint and electrical characteristics, while also weighting build quality and corrosion resistance as crucial for long-term reliability.
Our full evaluation process is outlined in our review methodology.
Conclusion
Prioritize fitment accuracy, signal compatibility, and environmental durability when selecting a replacement Chrysler Town & Country ABS wheel speed sensor. These three factors most directly affect ABS performance and long-term reliability. Balance ease of installation and wiring quality against durability tradeoffs. Proper installation and confirming stable wheel-speed signals after replacement will minimize repeat diagnostics and restore consistent ABS and traction-control behavior.
Explore More:
- Check out all Chrysler Town & Country parts & accessories
- Explore Electrical System
- Browse all Auto Parts
