Note: This article contains affiliate links. If you click on these links and make a purchase, I may earn a small commission at no extra cost to you. This helps support my research and content. Read my full affiliate disclosure here.
If your 2010-2017 Chevrolet Equinox is showing vibration, clicking in turns, or leaking grease from a torn boot, replacing the CV axle is often the practical fix. Choosing the right CV axle matters because fit, joint quality, and protective boots determine how long the repair lasts and how the vehicle drives afterward.This guide shortlists the seven top CV axles for the Equinox across common configurations and explains the evaluation criteria we used, including fitment accuracy, joint materials, and ease of installation. Read on to see which attributes matter most for a durable half shaft replacement and what to expect during installation.
Looking for other parts? See all Chevrolet Equinox parts & accessories.
Top Picks at a Glance
| Best Overall The best all-around choice for most situations | Detroit Axle Front CV Axle Shafts Assembly Pair for 2.4L Equinox/Terrain (2010–2017) | ![]() |
| Best Quality Built to a higher standard if you want something more solid | MOOG CV Axle Assembly Front Right (10E007R) | ![]() |
| Best Value The sweet spot between price and what you get | Detroit Axle Front Left CV Axle Shaft Assembly for 2.4L Equinox/Terrain | ![]() |
| Best Budget The cheapest option that still gets the job done reliably | AUTOSTEADY Front Left and Right CV Axles for 2.4L Chevy Equinox / GMC Terrain (pair) | ![]() |
| Highest Rated A top-rated pick with lots of positive feedback | Detroit Axle Front 2pc CV Axles for 2.4L Chevrolet Equinox / GMC Terrain (Pair) | ![]() |
| Most Popular A crowd favorite that many people choose with confidence | TRQ Front Driver and Passenger CV Axle Shaft Assembly Set (front) | ![]() |
| Best Seller A high-volume bestseller chosen again and again | A-Premium Pair Front CV Axle Shaft Assembly for Chevrolet Equinox & GMC Terrain 2010-2016 2.4L | ![]() |
1. Detroit Axle Front CV Axle Shafts Assembly Pair for 2.4L Equinox/Terrain (2010–2017)
| Inner Spline (driver) | 34 |
|---|---|
| Outer Spline | 30 |
| Overall Length (driver) | 26 5/8" |
| Overall Length (passenger) | 22 1/2" |
This Detroit Axle kit supplies both front CV axle shafts as complete assemblies for 2.4L Equinox and Terrain models, letting you replace worn or torn axles without rebuilding your existing joints. Installation is typical for front-drive half-shaft swaps: remove the wheel and hub components, pull the old shaft, and press the new assembly into the transaxle and hub. Notable features include factory-style splines and a complete assembled joint so you do not need to transfer boots or bearings. The assemblies cover driver and passenger lengths and inner spline counts to match factory fitment, and the included lifetime warranty provides long-term confidence. Practical benefits are faster install time and restoring smooth, vibration-free driving compared with worn CVs. Limitations are that these are specific to the 2.4L models only and you should verify spline counts and lengths before ordering to ensure exact fitment for your vehicle and year. Expect standard replacement-level durability rather than performance upgrades.
Best for: A practical owner looking for a straightforward, factory-style replacement to restore front-end smoothness and eliminate CV noise or vibration on 2.4L Equinox or Terrain models.
Less Ideal for: Drivers wanting performance or heavy-duty upgraded axles for towing, racing, or off-road use should consider reinforced or performance-specific replacements instead.
- Sold as a matched pair to replace both front half-shafts at once
- Comes as complete assemblies so no boot or joint transfer is required
- Factory-style splines and lengths aimed at direct fit for 2.4L Equinox/Terrain
- Lifetime warranty included for long-term coverage
- Fitment limited to 2.4L models only, not compatible with other engines or configurations
Verdict: Buy this if you need a matched, ready-to-install front CV axle pair that restores factory-style fit and function on 2.4L 2010–2017 Equinox and Terrain models.
2. MOOG CV Axle Assembly Front Right (10E007R)
| Brand | MOOG |
|---|---|
| Position | Front Right |
| Manufacturer | DRiV Incorporated |
| Model | CV Axle Assembly |
This MOOG front right CV axle kit replaces the entire half-shaft with a preassembled unit that includes the axle nut and any required inboard bolts for a bolt‑in repair. It is built with heat-treated bearings, races, and housings for improved joint durability and a neoprene boot to keep water and road debris out, which helps reduce premature failure in wet or salty conditions. The axle receives an anti-rust coating on the intermediate shaft and housings to resist corrosion on vehicles exposed to winter weather. Typical use is direct replacement during a driveline repair to restore smooth power transfer and eliminate clicking or vibration from a worn CV joint. Installation is straightforward for a competent DIYer or technician since the unit arrives assembled and vehicle-specific. Limitations are that this is a direct replacement for the right front only and does not alter performance beyond restoring factory-spec operation, so it is not a performance-upgrade axle for high-power modifications.
Best for: Buyers who need a reliable, vehicle-specific replacement to restore factory drivability and durability after CV joint wear, and who prioritize long-term reliability over aftermarket performance upgrades.
Less Ideal for: Drivers planning significant engine or drivetrain power increases or motorsport use should consider strength‑rated aftermarket axles designed for higher torque loads.
- Preassembled unit includes axle nut and required bolts for easier installation
- Heat-treated bearings and housings for improved joint life under normal and spirited driving
- Neoprene boot and rust-resistant coating reduce water, debris, and corrosion-related failures
- Vehicle-specific fitment simplifies repair and restores factory drivability
- Direct replacement only and does not increase torque capacity for modified or high-power applications
Verdict: A durable, preassembled right-front replacement that restores factory drivability and simplifies installation for 2010–2017 Equinox owners.
3. Detroit Axle Front Left CV Axle Shaft Assembly for 2.4L Equinox/Terrain
| Overall Length | 26 5/8" |
|---|---|
| Inner Spline | 34 |
| Outer Spline | 30 |
| Inner Shape | Male |
| ABS on Axle | None |
This Detroit Axle front left CV axle is sold as a complete driver-side half-shaft assembly built to replace a worn or broken factory unit on 2.4L Equinox/Terrain models from 2010 through 2017. It arrives ready to install with specified spline counts and a male inner shape so you do not need to transfer boots or joints. Detroit Axle states the part has undergone impact, wear, and fatigue testing and includes a lifetime warranty, which provides ongoing reassurance for street-driven vehicles. Typical use is straightforward: swap the failed axle for this assembly during routine repair to restore steering smoothness and eliminate clicking or vibration under acceleration. Practical limitations are that it does not include an ABS tone ring and fitment is limited to the 2.4L configuration, so it is not suitable for other engine or drivetrain variants. Buyers should also verify spline and length match before installation since hub and trans interfaces must align.
Best for: Buyers looking to restore factory-like drivability on a 2.4L Equinox or Terrain without rebuilding components, prioritizing a ready-to-install direct replacement and long-term reliability.
Less Ideal for: People with non-2.4L engines, altered drivetrains, or vehicles that require an ABS tone ring should look for a different axle or a model that explicitly includes ABS compatibility.
- Complete replacement assembly reduces installation time compared with rebuilding the old axle
- Built to pass impact, wear, and fatigue testing for durability in normal driving
- Lifetime warranty offers long-term protection against manufacturing defects
- Direct-fit design with specified inner and outer spline counts for correct engagement
- No ABS tone ring on the axle limits compatibility with ABS-equipped hubs that require a sensor ring
Verdict: A ready-to-install direct-replacement half-shaft that quickly restores drivability on 2.4L Equinox/Terrain models while offering long-term peace of mind with a lifetime warranty.
4. AUTOSTEADY Front Left and Right CV Axles for 2.4L Chevy Equinox / GMC Terrain (pair)
| Manufacturer | AUTOSTEADY |
|---|---|
| Manufacturer Part Number | 60AS1557X60AS1558 |
| Fitment years | 2010-2017 (2.4L models only) |
| Package | Front driver and passenger axle pair |
| Warranty | 10-Year Warranty |
These AUTOSTEADY CV axles are sold as a matched driver and passenger pair intended to replace worn or damaged front half-shafts on 2.4L Equinox and Terrain models from 2010 to 2017. Each shaft is built to the vehicle-specific spline counts and inner shapes listed by the manufacturer, so installation is the typical bolt-and-press procedure used for front-drive drive shafts. The listing includes both the longer driver side and shorter passenger side assemblies and carries a 10-year warranty, which helps reduce long-term ownership risk for budget buyers. Practical benefits include direct-fit compatibility for the specified engine and years, and receiving both sides at once avoids sourcing mismatched parts. Limitations are that these axles are limited to the 2.4L models only and do not include ABS tone rings, so vehicles that require an ABS-equipped axle will need a different part. Buyers should also plan for a shop or the right tools to press the shafts in and torque components to factory specs.
Best for: Buyers replacing worn front axles on a 2.4L Equinox or Terrain who want a cost-conscious, direct-replacement pair and prefer getting both sides at once to avoid fitment guesswork.
Less Ideal for: Shoppers with non-2.4L powertrains or vehicles that require ABS-equipped axles should look for parts specifically listed for their configuration.
- Sold as a matching left and right pair for one purchase
- Vehicle-specific spline counts and inner shapes for direct-fit installation on 2.4L models
- Includes a lengthy 10-year warranty for long-term peace of mind
- Not compatible with non-2.4L Equinox/Terrain variants or models requiring ABS tone rings
Verdict: A budget-friendly, vehicle-specific matched pair of front CV axles for 2.4L Equinox/Terrain owners who want a straightforward direct-replacement solution.
5. Detroit Axle Front 2pc CV Axles for 2.4L Chevrolet Equinox / GMC Terrain (Pair)
| Engine fitment | 2.4L models only |
|---|---|
| Included pieces | 2 front CV axle shafts assembly |
| Inner spline (driver) | 34 |
| Outer spline | 30 |
These Detroit Axle front CV axles replace the two half-shafts on 2.4L Equinox and Terrain models to restore smooth front-wheel drive operation and eliminate clicking or vibration from worn joints. The kit includes both driver and passenger shafts built to match the listed spline counts and lengths so installation uses the factory locations and mating points. The axles are tested for impact, wear, and fatigue and come with a 10-year warranty, which supports long-term reliability for daily drivers. Expect a straightforward swap for anyone comfortable with basic suspension and hub work; the shafts arrive ready to install with the correct inner shapes and splines specified. Limitations are that fitment is restricted to the 2.4L models only and measurements must match your vehicle when ordering, and professional installation may be needed if the hub or axle nuts are seized. These are a practical factory-style replacement for restoring drivability without modifying suspension geometry.
Best for: A buyer who prioritizes a dependable, long-lasting factory-style replacement to restore quiet, vibration-free front driveline performance on a 2.4L Equinox or Terrain.
Less Ideal for: Do not choose this if you need axles for a different engine or a modified vehicle drivetrain or if you prefer performance-upgraded aftermarket axles.
- Sold as a matched pair so both front axles are replaced at once
- Built and tested for impact, wear, and fatigue to support durability
- Specified spline counts and inner shapes for direct replacement fit
- Backed by a 10-year warranty for long-term peace of mind
- Compatibility limited to 2.4L model years listed so must confirm engine and year fitment
Verdict: Choose these Detroit Axles when you want a tested, warranty-backed pair of front CV axles to reliably restore drivability on 2.4L 2010–2017 Equinox or Terrain models.
6. TRQ Front Driver and Passenger CV Axle Shaft Assembly Set (front)
| Position | Front |
|---|---|
| Manufacturer | TRQ |
| Model | TRQ CSA82558 2 Piece CV Axle Assembly Set |
| Manufacturer Part Number | CSA82558 |
This TRQ two-piece CV axle kit supplies both left and right front half-shafts as direct-fit replacements for 2010–2017 Chevrolet Equinox and GMC Terrain 2.4L vehicles. Each axle comes pre-assembled with neoprene boots and moly grease to resist premature wear, and the assemblies are manufactured to tighter tolerances for lifespan closer to factory-quality parts. Typical use is straightforward: swap the worn or torn axle assemblies during a front drivetrain service to eliminate clicking in turns or vibration under acceleration. The pre-assembled design removes the need to repack CV joints or clamp boots, which speeds DIY repairs and reduces installation uncertainty. Trade-offs are that these are aftermarket assemblies rather than dealer-branded units and longevity will depend on installation care and driving conditions, but the included materials and factory-style fit aim to minimize surprises for installers seeking a budget-conscious replacement backed by wide compatibility and how-to support resources.
Best for: Buyers who want a practical, do-it-yourself replacement that simplifies installation and restores front-end driveline function with parts designed to match factory fitment and durability expectations.
Less Ideal for: Drivers seeking OEM-sourced dealer parts or those who prefer professional-install-only solutions should consider dealer replacements or branded alternatives.
- Direct-fit pre-assembled left and right front axle shafts for easier, faster replacement
- Neoprene CV boots for improved durability over stock rubber boots
- Moly-greased joints to reduce premature wear
- Manufactured to tighter tolerances for a closer fit to factory specifications
- Includes compatibility with the specified 2010–2017 Equinox/Terrain 2.4L application
- Aftermarket assembly so long-term life can vary with driving conditions and installation quality
Verdict: A ready-to-install, dual-front axle kit that gives DIYers a straightforward factory-style replacement for the 2010–2017 Equinox/Terrain 2.4L front driveline.
7. A-Premium Pair Front CV Axle Shaft Assembly for Chevrolet Equinox & GMC Terrain 2010-2016 2.4L
| Vehicle fitment | Chevrolet Equinox & GMC Terrain 2010-2016 L4 2.4L (1st Design) |
|---|---|
| Location | Front left and right |
| Axle nut | Included |
| ABS ring | Not included |
| Manufacturer part number | APCVA172 |
These A-Premium front CV axle assemblies replace both left and right half-shafts to restore drivetrain connection on affected Chevrolet Equinox and GMC Terrain 2.4L models. The pair arrives with axle nuts and fits the first-design 2010–2016 front axles; spline counts and compressed lengths are matched to each side so installation is straightforward for a trained technician. Because ABS rings are not included, vehicles that require an ABS tone ring will need to transfer the original rings or add replacements before fitting. The axles are intended as direct-fit factory-quality replacements and come with a one-year unlimited-mileage guarantee for added peace of mind. Expect typical benefits of full-shaft assemblies: quicker installation than rebuilding original CV joints and new boots to prevent grease loss. Buyers should plan for professional installation if they are not comfortable with suspension disassembly and swapping tone rings when needed.
Best for: Buyers who prioritize a reliable, factory-style replacement and want a matched pair with a parts guarantee for routine axle failure or scheduled preventive maintenance.
Less Ideal for: Drivers who need axles for different engine or later redesigns, or those expecting a performance-upgraded axle for heavy-duty or modified use.
- Sold as a matched left-and-right pair for simultaneous replacement
- Includes axle nuts so fewer missing parts at install
- Direct-fit design for specified 2010–2016 2.4L Equinox and Terrain first-design applications
- Backed by a one-year unlimited-mileage guarantee
- Does not include ABS tone rings so original rings must be reused or sourced separately
Verdict: A matched pair of direct-fit front CV axles with included axle nuts and a one-year guarantee makes this a solid, low-risk replacement for 2010–2016 2.4L Equinox and Terrain owners.
Choosing the Right 2010-2017 Chevrolet Equinox CV Axle: Key Factors to Consider
Fitment Accuracy
Correct fitment is the single most important factor when replacing a CV axle on a 2010-2017 Chevrolet Equinox. Axles must match spline count, flange diameter, and overall length to engage the transmission or differential and hub properly. Even small deviations can cause poor engagement, excess play, or premature wear.
Fitment accuracy also reduces installation time and avoids additional machining or part swaps. Confirming compatibility with the vehicle year range and any factory options ensures the axle seats correctly and that seals align with mating surfaces. When shopping, look for assemblies explicitly listed for 2010-2017 Equinox and any noted configuration differences such as AWD vs FWD or automatic vs manual trans fitment.
CV Joint Construction
The materials and manufacturing of the CV joint affect durability and noise levels. Joints made from properly heat-treated alloy steel with precision-machined raceways and hardened bearings resist wear under torque and steering angle loads. Poorly manufactured joints can develop clicking or vibration as tolerances loosen.
Consider whether the joint is a tripod, Rzeppa, or another design appropriate for the axle position, and whether it is pre-greased and sealed at the factory. High-quality joint construction minimizes internal play, reduces friction, and extends service life on vehicles that see frequent turns or heavy loads.
Boot Material and Sealing
The CV boot protects the joint from contamination and retains grease. Boots made from high-grade thermoplastic elastomer or reinforced neoprene resist cracking from heat, road chemicals, and flexing. A torn boot is a common failure mode that quickly leads to joint failure once water and dirt contaminate the grease.
Pay attention to the sealing method and clamp quality. Crimp-style or ear clamps that maintain consistent pressure are preferable to flimsy bands that can loosen. Durable boots and secure clamps delay the need for another axle or joint rebuild and are especially important for Equinox owners driving in climates with salt or frequent moisture.
Shaft Straightness and Balance
A straight, balanced axle shaft prevents vibration at highway speeds and reduces stress on wheel bearings and transmission output shafts. Even small bends or imbalance in the half shaft can cause perceptible shimmy at higher speeds or under load.
Quality assemblies are balanced at the factory and finished with corrosion-resistant coatings that preserve straightness and prevent rust-related stress. For a 2010-2017 Equinox, a balanced shaft contributes to a quieter ride and reduces the chance of repeat repairs due to induced bearing wear or driveline noise.
Pre-Assembly and Hardware Included
Some CV axle assemblies arrive pre-assembled with clamps and grease installed, while others require additional parts or press-fit components. Assemblies that include necessary hardware and are pre-filled with the correct grease type simplify installation and reduce time in the shop.
If you plan to perform the replacement yourself, verify whether the axle comes with replacement axle nuts, hub bolts, or retaining clips. Missing hardware can stall a job and lead to substitutions that compromise the repair. Pre-assembled units also reduce the chance of incorrect assembly that could lead to early failure.
Warranty and Expected Service Life
Warranty terms and stated expected service life provide a signal of manufacturer confidence. For owners of a 2010-2017 Chevrolet Equinox, a longer warranty often indicates better materials and quality control. However, warranty alone should not replace inspection of construction details like boot material and joint type.
Consider typical driving conditions and how they align with warranty coverage. A longer warranty may offset the inconvenience of a repeat repair, but focus on assemblies that combine solid construction with reasonable warranty terms to protect your investment.
Understanding Common Failure Modes on the Equinox
On the 2010-2017 Chevrolet Equinox, CV axle failures most often start with a torn boot that allows grease to escape and contaminants to enter the joint. Left unchecked, the joint will wear rapidly, producing clicking sounds in turns and eventual loss of drivability. Recognizing early symptoms reduces the scope of repair needed.
Other common issues include shaft corrosion that leads to weakened splines and imbalance, and joint wear from heavy loads or aggressive driving. Regular inspection of boots and listening for axle noise when turning helps identify problems before they escalate.
- Torn boot leading to grease loss and contamination
- Clicking or popping when making tight turns
- Axle vibration at highway speed caused by imbalance or wear
- Visible grease around the wheel or inner fender indicating a leaking boot
Do-It-Yourself Replacement: What to Expect
Replacing a CV axle on the Equinox is straightforward for mechanically inclined owners with basic tools. Typical steps include removing the wheel, separating the hub or tie rod where needed, and using a pry method or press to remove the old axle from the transaxle. Installation involves ensuring proper spline engagement and torquing the axle nut to spec.
Plan for about one to two hours per axle for a DIY job if you have the right tools and a service manual. Some assemblies are easier because they come pre-filled and include OEM-style clamps. If the inner joint is pressed to the shaft, specialized tools or a shop visit may be necessary.
- Essential tools: torque wrench, jack stands, pry bar, socket set
- Expect to verify spline engagement depth and axle shaft seating
- Inspect hub bearings and seals while the axle is out
Signs You Need a CV Axle Replacement
Several clear signs indicate a failing CV axle on the Equinox: repetitive clicking noises when turning, grease splatter near the wheel well, visible damage to the CV joint boot, and vibration at highway speeds. These symptoms often appear progressively, with boot damage preceding audible joint failure.
If you hear clicking on tight turns that worsens under acceleration, or notice persistent vibration that does not respond to wheel balancing, the axle assembly is a likely culprit. Early replacement while the boot is intact but compromised can save the joint and avoid a full axle swap in some cases.
- Clicking or popping sounds while turning
- Visible grease or torn CV joint boot
- Persistent vibration at speed not cured by wheel balance
- Difficulty steering or unusual driveline noise under load
Installation Tips to Avoid Rework
When installing a replacement CV axle, clean mating surfaces thoroughly and inspect splines for burrs or corrosion before assembly. Lightly lubricate splines with manufacturer-recommended grease to ease engagement and prevent galling. Ensure the axle is fully seated at the transmission or hub before tightening to prevent preload issues.
Use new clamps or crimp-style bands where applicable and torque all fasteners to factory specifications. After installation, test-drive the vehicle through turns and at highway speeds to confirm that click or vibration symptoms are resolved. Recheck torque after initial mileage if recommended.
- Use the correct torque on axle nut and mounting hardware
- Replace worn hub bearings while axle is accessible
- Always use quality clamps and inspect boot seating after installation
When to Consider Rebuilding Instead of Replacing
Rebuilding a CV joint or replacing just the boot can be economical if the joint shows minimal internal wear and the shaft is straight. However, rebuilding requires experience and proper tools to press joints and pack grease correctly. For older Equinox units with extensive corrosion or worn splines, a full axle replacement is often more reliable.
If a torn boot is caught early and the joint still moves smoothly without noise, replacing the boot and repacking grease may extend service life. Assess the overall condition of the shaft and joint-bearing surfaces before committing to a rebuild to avoid repeat failure.
- Rebuild if boot failure is recent and joint shows no clicking
- Replace entire axle if splines are corroded or shaft is bent
- Consider shop rebuild only when tools and parts are readily available
Still looking for the perfect fit?
Select your Chevrolet Equinox configuration to see the most relevant CV Axles recommendations
How We Chose the Best 2010-2017 Chevrolet Equinox CV Axle
We selected CV axles for the 2010-2017 Chevrolet Equinox using vehicle-specific fit and durability filters to ensure reliable replacements that restore proper driveline function. Core evaluation criteria included fitment accuracy to year-range and factory configurations, quality of CV joint construction and heat treatment, boot material and sealing method, and the presence of balanced assemblies to reduce vibration.We also considered grease type and fill procedures that affect longevity, shaft straightness and splines alignment for ease of installation, and whether the assemblies include necessary hardware or pre-pressed components to speed installation. Durability indicators such as boot thickness, clamp quality, and corrosion-resistant finishes were weighed to predict service life. Practical installation factors such as press-fit vs. serviceable joints and the likelihood of needing specialized tools were part of the decision framework.Exclusions: we excluded assemblies that lacked clear fitment data for the 2010-2017 Equinox, units with non-standard spline counts, or products with insufficient information about joint construction or boot materials. The resulting shortlist balances longevity, fitment confidence, and realistic installation expectations for owners and technicians.
Our full evaluation process is outlined in our review methodology.
FAQ
How long does a CV axle last on a 2010-2017 Equinox?
Lifespan varies with driving conditions. Under normal use, many axles last well over 100,000 miles, but boots exposed to road salt or heavy flexing can fail sooner, leading to earlier joint wear.
Can I drive with a torn CV joint boot on my Equinox?
You can drive short distances, but it is not recommended. A torn boot lets grease escape and contaminants enter, which accelerates joint wear and can lead to clicking and eventual failure if not addressed quickly.
Will replacing the CV axle stop vibration at highway speed?
If the vibration is caused by a bent or worn axle shaft, replacing the CV axle typically resolves the issue. However, vibration can also come from wheel imbalance or worn bearings, so inspect those components as well.
Is axle noise when turning always a bad CV joint?
Not always, but clicking or popping in turns is a common indicator of CV joint wear. Other causes can include worn wheel bearings or suspension components, so a visual inspection of the boot and a road test help pinpoint the issue.
Can I replace a CV axle myself on the Equinox?
Many owners with basic mechanical skills can replace the axle using common tools. Some configurations may require a press or special tools, so review the service manual and prepare for possible complications like seized hub nuts.
What should I inspect while replacing the half shaft?
Inspect the hub bearing for play, check the axle splines for corrosion or damage, and examine seals and mating surfaces. Replacing worn bearings or seals while you have access can prevent future labor costs.
Final Verdict
When replacing a CV axle on a 2010-2017 Chevrolet Equinox, prioritize fitment accuracy, durable joint construction, and robust boot materials to restore quiet, vibration-free operation. Balance ease of installation and included hardware against long-term durability; pre-assembled units with high-quality clamps and proper grease fill reduce the chance of early failure.Ultimately, choose the option that best matches your vehicle configuration and expected driving conditions. Favor assemblies that address common Equinox failure modes so you can regain reliable steering response and drivetrain smoothness with confidence.
Explore More:
- Check out all Chevrolet Equinox parts & accessories
- Explore Transmission & Drivetrain
- Browse all Auto Parts






