Note: This article contains affiliate links. If you click on these links and make a purchase, I may earn a small commission at no extra cost to you. This helps support my research and content. Read my full affiliate disclosure here.
If you own a 2013-2017 Honda Accord and the cabin fan is weak, noisy, or intermittent, replacing the blower motor can restore proper heating and air conditioning performance. Choosing the right blower motor matters because the correct fit affects airflow, fan noise, and long-term reliability in daily driving and extreme weather.This guide covers the top blower motor options shortlisted for the 2013-2017 Accord, explains the evaluation criteria used, and highlights the practical tradeoffs you should consider. Read on to see which blower motor characteristics matter most and why they were included among the best choices.
Looking for other parts? See all Honda Accord parts & accessories.
Top Picks at a Glance
| Best Overall The best all-around choice for most situations | SCITOO Heater Blower Motor Assembly (replacement) |  |
| Best Quality Built to a higher standard if you want something more solid | AISIN HVAC Blower Motor with Wheel Assembly (BLMAZ-00181) |  |
| Best Budget The cheapest option that still gets the job done reliably | ECCPP Front HVAC Heater Blower Motor Assembly (fits select Honda/Acura) |  |
| Highest Rated A top-rated pick with lots of positive feedback | Aspligo Blower Motor Fan Assembly, Fit for 2013-2017 Honda Accord and Select Acura/Honda Models |  |
| Most Popular A crowd favorite that many people choose with confidence | GVPART4U Front Blower Motor (APAC04014) — Replacement for 2013–2017 Honda Accord and related models |  |
| Best Seller A high-volume bestseller chosen again and again | ILONPA HVAC Blower Motor with Fan (replaces 79310-T0A-A01) |  |
1. SCITOO Heater Blower Motor Assembly (replacement)
| Voltage | 12 Volts (DC) |
|---|---|
| Material | ABS, Plastic, Steel |
| Manufacturer Part Number | 122250-5206-1728462611 |
| OEM Part Number | 79310-T0A-A01, 79310-TR6-A71, PM4038, 76964, 79310-T2F-A01 |
This SCITOO blower motor is an aftermarket replacement built to fit 2013–2017 Honda Accord applications and several related Honda and Acura models. It installs as a direct swap into the factory cavity and uses the existing wiring harness, so typical installation is a straightforward in-dash or under-console swap that most home mechanics can complete in 15–30 minutes. The unit claims permanently lubricated self-aligning bearings for longer life and uses copper enameled wire and a silicon steel rotor plate for basic durability. Buyers report strong airflow and quiet operation initially, with some variability in longevity between units. The practical benefit is a low-cost option that restores HVAC airflow without replacing the whole blower assembly or paying dealer labor rates. Notable limitations are that some users find it slightly noisier or less powerful than factory units and a minority report intermittent failures, so expect possible variance in durability compared with higher-end replacements.
Best for: Buyers who want an inexpensive, ready-to-install blower motor to restore HVAC airflow on a 2013–2017 Honda Accord and prefer a straightforward DIY swap over dealer repair.
Less Ideal for: If you prioritize exact factory-level airflow, lowest possible noise, or longest-term reliability, consider higher-end replacement motors or factory-sourced parts instead.
- Direct-fit replacement that plugs into the factory harness for simple installation
- Uses permanently lubricated self-aligning bearings aimed at longer operational life
- Constructed with copper enameled wire and silicon steel rotor plate for basic durability
- Affordable alternative to dealer parts and professional replacement labor
- Some units reported as noisier or producing less airflow than original factory motors
- A minority of buyers experienced intermittent failures, so durability is not guaranteed
Verdict: A budget-friendly, direct-fit blower motor that gets a 2013–2017 Honda Accord's HVAC blowing again with simple DIY installation.
2. AISIN HVAC Blower Motor with Wheel Assembly (BLMAZ-00181)
| Speed | 2650 RPM |
|---|---|
| Voltage | 12 Volts |
| Horsepower | 228 Watts |
This Aisin blower motor replaces the front HVAC fan assembly and is intended for models that use the BLMAZ-00181 reference number. It pairs a brushed 12-volt motor with an included cage wheel so you get a ready-to-install unit rather than sourcing the fan separately. In everyday use it provides steady airflow across blower speed settings and Aisin highlights a high-rigidity center shaft and precision motor to reduce vibration and cabin noise. The unit is supplied with a basic installation manual and standard two-blade electrical terminals for a straightforward swap in the affected Hondas and Acuras. Expect OEM-style durability and quieter operation compared with worn stock motors, but note this is a brushed motor which can wear over very long service intervals and may not match the longevity of some higher-end or remanufactured brushless options. Installation accessibility depends on vehicle interior access and may require dash disassembly on some Accord model years.
Best for: Buyers who want a factory-quality, drop-in replacement blower that restores strong, quieter airflow in Accord cabins and prioritizes reliable daily driving performance.
Less Ideal for: If you want the longest possible service life or a brushless high-performance motor, consider remanufactured or upgraded blower options instead.
- Direct-fit replacement with included cage wheel for easier installation
- Engineered center shaft and precision motor to reduce vibration and cabin noise
- Comes with installation manual and standard blade terminals for straightforward electrical connection
- Brushed motor design may have shorter long-term life compared with brushless alternatives
Verdict: Choose this Aisin blower motor when you need a reliable, quieter, factory-quality replacement that fits directly and gets your Accord's HVAC airflow back to normal.
3. ECCPP Front HVAC Heater Blower Motor Assembly (fits select Honda/Acura)
| Compatible models | Select Honda Accord 2013-2017, CR-V 2012-2016, Civic 2013-2015; Acura RDX 2015-2018, ILX 2014-2022 |
|---|---|
| Brand | ECCPP |
| Material Type | ABS plastic |
| Part numbers | 700260, SK700260, BM4038C, 76964, 79310-T2F-A01 |
This ECCPP blower motor replaces the front HVAC blower in compatible Honda Accord, CR-V, Civic and certain Acura models to restore cabin airflow and HVAC function. It installs where the factory motor sat and spins the fan cage to push air through the heater core and vents; the listing highlights balanced rotor winding and copper enameled wire for consistent electrical performance. For typical use it returns ventilation and defrost capability after an original motor fails or becomes noisy. The unit is offered as a direct-style aftermarket replacement with claimed form, fit, and function parity and common compatible part numbers listed for confirmation. Practical benefits include straightforward swap-in replacement for DIYers or independent shops and the ability to quickly regain full blower speeds. Limitations are typical for economy aftermarket parts: long-term durability can vary versus factory parts and fit should be verified against the vehicle compatibility chart before purchase.
Best for: Buyers looking to fix a failed blower on a tight budget who want a straightforward replacement that restores cabin airflow quickly and keeps repair costs low.
Less Ideal for: Drivers seeking an exact factory motor with extended longevity or a premium warranty should consider dealer or higher-end aftermarket options instead.
- Direct-style replacement that matches listed factory part numbers for easy fit verification
- Balanced rotor and copper enameled wire for stable electrical performance and reduced vibration
- Simple drop-in installation suitable for DIY replacement or quick shop service
- Restores full HVAC airflow and defrost function when an original blower motor fails
- Aftermarket construction may not match long-term durability of an OEM motor
Verdict: A cost-conscious, direct-fit replacement that quickly restores HVAC airflow on compatible 2013–2017 Honda Accords without a costly dealer repair.
4. Aspligo Blower Motor Fan Assembly, Fit for 2013-2017 Honda Accord and Select Acura/Honda Models
| Voltage | 12 Volts |
|---|---|
| Horsepower | 700260 Horsepower |
| Material Type | Metal |
This Aspligo blower motor replaces the vehicle cabin fan assembly to restore heating, ventilation, and air conditioning airflow in affected Honda Accord models from 2013 to 2017 and several compatible Acura/Honda vehicles. It installs in place of the factory unit and is intended for HVAC systems that have weak or failed blower fans. Notable features include a 12V motor, reinforced metal components paired with high-impact ABS housings, and upgraded copper windings and bearings intended to reduce friction and noise. In practice the assembly should deliver stronger, steadier airflow and quieter operation than worn original units, while the metal construction and reinforced plastics improve resistance to corrosion and everyday wear. Buyers should expect a direct mechanical replacement rather than a performance upgrade; fitment must match the listed part numbers and vehicle models and installation may require basic disassembly of the dash or glovebox area. The motor is function-focused, offering dependable service for restoring HVAC comfort but without added electronic features or variable-speed control beyond the vehicle's existing blower system.
Best for: A buyer seeking a reliable, long-lasting replacement to restore HVAC airflow in a 2013–2017 Honda Accord or the listed compatible Acura/Honda models, prioritizing durability and quiet operation over extra features.
Less Ideal for: Those wanting upgraded blower performance with additional electronic controls or a universal fit for multiple vehicle platforms should consider other options.
- Constructed with reinforced metal parts and high-impact ABS for improved durability
- Upgraded bearings and copper windings designed to reduce friction and noise
- Direct-fit replacement for 2013–2017 Honda Accord and listed Acura/Honda models using the specified part numbers
- Restores strong, consistent HVAC airflow to heating and cooling systems
- Does not add electronic speed controls or advanced features beyond factory capability
- Installation can require dash or glovebox removal and basic mechanical skill
Verdict: Choose this blower motor when you need a durable, quiet factory-style replacement to reliably restore HVAC airflow in 2013–2017 Honda Accord models.
5. GVPART4U Front Blower Motor (APAC04014) — Replacement for 2013–2017 Honda Accord and related models
| Speed | 2850 RPM |
|---|---|
| Voltage | 12 Volts (DC) |
| Wattage | 228 watts |
| Amperage | 19 |
This GVPART4U front blower motor is a direct-replacement HVAC unit meant to restore or improve the cabin air delivery on compatible 2013–2017 Honda Accord vehicles and related Honda and Acura models. It installs as a like-for-like swap and includes the plastic fan cage, so most owners can complete the job with basic hand tools in a short garage session. The motor is specified to run at 2850 RPM on a 12V system and the listing highlights testing for long life and balanced operation to reduce vibration. In real use the unit moves air strongly across speed settings and many buyers report a quiet, factory-like sound level. Practical benefits include claimed long service life and an upgraded fan shape to limit dust buildup and push more air. Limitations are typical of aftermarket replacements: fit and connector type should be double-checked against your vehicle and longevity can vary with installation and local conditions despite the brand's 1-year warranty.
Best for: Buyers who want a proven, ready-to-install replacement that restores HVAC airflow quickly and prefer products with many positive owner reports and straightforward installation.
Less Ideal for: If you need a rear blower or a blower for a different make or year range this unit is not appropriate; professional shops seeking OEM-branded parts may prefer factory-sourced replacements.
- Designed as a direct replacement for specified Honda and Acura front blower positions
- Balanced and tested motor to reduce vibration and audible noise
- Upgraded fan cage profile to resist dust buildup and increase airflow
- Includes blower motor with fan cage for plug-and-play installation
- Compatibility must be verified against the vehicle fitment chart before purchase
Verdict: A well-tested, plug-and-play front blower motor that reliably restores strong, mostly quiet cabin airflow for compatible 2013–2017 Honda Accord owners looking for a replacement with solid user feedback.
6. ILONPA HVAC Blower Motor with Fan (replaces 79310-T0A-A01)
| Replaces Part Numbers | 79310-T0A-A01, 79310-T2F-A01, 79310-TR6-A71, PM4038 |
|---|---|
| Fitment Vehicles | 2013-2017 Honda Accord (plus listed Honda/Acura models) |
| Voltage | 12 Volts |
| Material Type | Evaporator |
This ILONPA blower motor is a direct-replacement style assembly intended to fix weak airflow, intermittent fan speeds, or noises from a failing blower in compatible Accords and related vehicles. It includes the fan/turbine and a 12V motor sized to match the factory unit so installation is straightforward for someone comfortable removing the glove box and a few fasteners. In real use it restores steady air delivery through the heater core and evaporator and many buyers report quiet, OEM-like performance after installation. Some units can be slightly louder or produce a whistle on certain vehicles, so results vary and a careful fit and trim check is recommended before final installation. The unit does not include resistors, so it replaces only the motor assembly itself and technicians should verify trim and part numbers for exact fitment. This is a practical value option when you need to replace a failing blower without replacing the whole HVAC housing.
Best for: Buyers who want a straightforward, factory-style repair for a failing Accord blower motor and prioritize dependable restoration of cabin airflow with minimal parts swapping.
Less Ideal for: Shoppers who need a complete HVAC module replacement or a guaranteed noiseless, premium aftermarket motor should consider other options or OEM parts.
- Direct-replacement fan and motor assembly that matches common factory part numbers
- Restores proper cabin airflow and resolves speed/intermittent operation issues
- Reportedly easy to install with basic tools and simple fastener access
- Many buyers report quiet, factory-like operation after fitting
- Does not include blower motor resistor so additional components may be required for some repairs
- Some units have been reported to produce a whining or whistling noise on certain vehicles
Verdict: A budget-friendly, direct-fit blower motor assembly that reliably brings airflow back to factory levels for 2013–2017 Honda Accord repairs.
Choosing the Right 2013-2017 Honda Accord Blower Motor: Key Factors to Consider
Fitment and Connector Compatibility
Correct physical fit and electrical connector compatibility are essential because the blower motor must mount into the Accord HVAC housing without modification. A motor that does not match the original mounting flange, screw pattern, or depth can interfere with the blower wheel or ducting and cause rubbing or poor airflow.
Electrical connector differences can also create intermittent operation or require splicing, which increases failure risk. Confirming exact fitment for the 2013-2017 Accord ensures a straightforward replacement and reduces installation time. When evaluating options, check the listed fitment details and connector type to avoid adaptors or casing changes that compromise reliability.
Airflow Performance
Airflow capability determines how effectively the HVAC system can deliver heat or cooled air to the cabin at each fan speed. Better-performing blower motors maintain stronger, more consistent flow across low and high speed settings, which matters for defrosting the windshield and maintaining interior comfort.
Look for motors with rated fan speeds or published airflow data, and pay attention to how they perform on the lower settings. A motor that stalls or produces weak flow at low speeds will feel inadequate even if peak airflow is acceptable. For the Accord, balanced flow across speeds improves both comfort and the HVAC system's ability to manage temperature.
Noise and Vibration
Cabin noise can increase noticeably when a blower motor develops imbalance, worn bearings, or a misaligned fan wheel. Quieter motors use better-balanced blower wheels and higher-quality bearings to reduce mechanical noise and vibration that transmit into the cabin.
Consider reported decibel levels, bearing type, and user feedback about hums or rattles. A slightly higher initial cost for a low-noise unit is often worth it because it preserves cabin comfort and avoids repeated replacements caused by bearing failure or vibration damage.
Durability and Bearing Design
Durability is driven largely by the motor's internal construction and bearing design. Sleeve bearings are common and economical, but sealed ball bearings typically last longer under continuous use, especially in stop-and-go city driving or when the blower runs for extended periods in extreme temperatures.
Materials used in the blower wheel and motor housing also affect resistance to warping or cracking. Durable components reduce the likelihood of imbalance or catastrophic failure that can cascade into other HVAC parts. Prioritizing construction quality helps ensure long service life in the Accord's HVAC environment.
Electrical Reliability and Resistance to Heat
Blower motors operate in a warm area near HVAC components and can be exposed to higher temperatures. Units built with temperature-resistant insulation, robust windings, and secure electrical terminals are less likely to fail from heat-related stress.
Additionally, electrical reliability covers performance under voltage fluctuations and the quality of the pigtail or connector. Poor electrical design can mimic blower motor resistor failures, creating intermittent speeds or complete loss of function. For the 2013-2017 Accord, prioritize motors with solid electrical protection and clear wiring specifications.
Warranty and Support
A longer warranty indicates manufacturer confidence and provides protection against premature failure. Warranties that cover both motor and blower wheel address common failure points and give owners recourse if a component fails early.
Consider the warranty period and what it covers, as well as the availability of customer support or clear installation guides. Good post-sale support reduces downtime and simplifies troubleshooting if issues arise after installation.
Common Blower Motor Symptoms on the 2013-2017 Accord
Blower motor issues often present as weak airflow, a complete lack of fan operation, or unusual noises coming from the dash. Symptoms can appear suddenly or gradually, depending on whether the problem is electrical, mechanical, or due to debris in the blower housing.
Intermittent operation on certain fan speeds may indicate a failing motor or an associated electrical control problem. Recognizing the symptom pattern helps you determine whether replacement is required or if further diagnostic work is needed before spending on parts.
- Weak airflow at all speeds suggests a worn or obstructed blower wheel or low motor torque.
- Fan works only at some speeds, which can relate to motor or resistor issues.
- Squealing, grinding, or rattling noises point to worn bearings or a misaligned blower wheel.
- Burning smells or smoke are signs of severe electrical failure and require immediate attention.
How the Blower Motor Interacts With the HVAC System
The blower motor is the driving force that moves conditioned air through the HVAC ducts. Its performance affects cabin temperature regulation, defrost capability, and fan speed responsiveness. A motor that delivers steady airflow ensures the system reaches target temperatures faster and maintains comfortable conditions.
On the Accord, the motor must work with the cabin air filter, evaporator, heater core, and blend doors. Any change in airflow from the blower motor can alter pressure across the system and affect the function of these components, so replacements should preserve the original airflow profile as closely as possible.
- Consistent airflow helps the HVAC controls regulate temperature with fewer cycling events.
- Proper motor operation reduces icing risk on the evaporator by maintaining correct airflow rates.
Diagnosing Noise and Vibration Before Replacement
Before replacing the blower motor, perform simple checks to confirm the motor is the source of noise. Inspect the blower wheel for debris, loose screws, or signs of impact. A visual inspection through the glove box or access panel often reveals obstructions that can be cleared without a new motor.
If debris is not the issue, test the motor at different speeds to isolate bearings-related noises from electrical whining. Worn bearings generate consistent mechanical sounds that change with fan speed, whereas electrical issues often present as abrupt drops in power or buzzing that is not correlated with rpm.
- Remove visible debris from the blower housing and test fan response.
- Listen for noise changes across speed settings to characterize bearing versus electrical noise.
- Check mounting fasteners and isolators that can transmit vibration into the dash.
When to Replace the Blower Motor Versus the Resistor or Controls
Intermittent fan speeds or operation only on specific settings sometimes point to a blower motor resistor or the climate control unit, not the motor itself. If the fan fails only at certain speeds but runs normally on others, start by testing the resistor or control signals before swapping the motor.
However, when the motor shows mechanical noise, reduced torque across all speeds, or physical damage to the blower wheel, replacement is the right course. Evaluating symptoms methodically prevents unnecessary part changes and focuses repair effort where it will be effective.
- Replace the resistor or controls if diagnostics show proper motor voltage but speed failures persist.
- Replace the motor if there is mechanical noise, visual damage, or loss of torque.
Basic Maintenance Tips to Extend Blower Motor Life
Routine maintenance can prolong the life of the blower motor. Replace the cabin air filter at recommended intervals to prevent debris buildup that strains the motor and blower wheel. Keeping the HVAC inlet area clean reduces the chance of foreign material entering the fan housing.
Avoid prolonged aftermarket usage patterns that run the blower continuously at maximum for extended stretches without needed cooling or heating breaks. Address any unusual noises early, as small imbalances or bearing wear can escalate quickly if left unattended.
- Replace the cabin air filter regularly to reduce blower load.
- Clear leaves and debris from the HVAC intake areas outside the vehicle.
- Inspect the blower housing and wheel during filter changes for early signs of wear.
Installation Considerations for the 2013-2017 Accord
Installation on the 2013-2017 Accord typically requires access through the passenger-side footwell or glove box area and careful reconnection of the electrical harness. Ensure the replacement motor uses the same connector type and that the blower wheel rotates freely before final assembly.
Follow torque specifications for mounting fasteners and verify that sealing surfaces sit flush to avoid air leaks. If you are replacing the motor yourself, take photos of the wiring and mounting points during disassembly to ease reassembly and confirm harness routing does not rub against moving parts.
- Verify electrical connector pinout before finalizing the installation.
- Check that the blower wheel clears the housing and does not contact ductwork.
- Reassemble panels carefully to avoid rattles or loose trim that can mimic motor noise.
Still looking for the perfect fit?
Select your Honda Accord configuration to see the most relevant Blower Motors recommendations
How We Chose the Best 2013-2017 Honda Accord Blower Motor
We evaluated candidate blower motors for the 2013-2017 Honda Accord using a focused set of practical criteria that matter to owners and technicians. Fitment and compatibility were primary filters to ensure the motor aligns with the Accord 2013-2017 HVAC housing, mounting points, electrical connector type, and blend-door clearances. Airflow performance was measured by published fan speed consistency and capacity at each controller setting to ensure adequate cabin heating and cooling across conditions. Noise and vibration characteristics were assessed using manufacturer noise ratings, reported decibel ranges, and user feedback to prioritize quieter operation.Durability and materials were examined, including motor type, bearing design, and blower wheel construction, since longevity under continuous duty affects cost-effectiveness. Electrical reliability, such as resistance to voltage surges and connector quality, was considered to reduce failure modes that mimic resistor or control failures. We excluded options lacking precise 2013-2017 Accord fit information, motors intended for other model years, and units without clear quality or warranty documentation. The final picks represent units that best balance compatibility, airflow, quiet operation, and long-term reliability for this vehicle.
Our full evaluation process is outlined in our review methodology.
FAQ
What are the first signs the blower motor is failing in my 2013-2017 Accord?
Early signs include reduced airflow at all fan speeds, unusual noises like squealing or grinding from the dash, and intermittent operation on multiple speeds. These symptoms often appear gradually and may be accompanied by visible debris or binding in the blower wheel.
Can a blower motor failure affect heating and air conditioning performance?
Yes. A failing blower motor reduces the system's ability to move conditioned air, which can lengthen the time needed to heat or cool the cabin and impair defrost performance. Consistent airflow is essential for the HVAC system to regulate cabin temperature effectively.
How do I tell if the resistor or the motor is the problem when speeds are inconsistent?
If the fan runs on some speeds but not others, test for correct voltage at the motor connector across settings. Proper voltage with speed issues often indicates a resistor or control problem. Mechanical noises, weak torque across all speeds, or visible damage point to the motor itself.
Is it worth replacing the blower wheel separately from the motor?
Sometimes the blower wheel can be replaced if it is damaged or imbalanced and the motor remains in good condition. However, if the motor shows bearing wear or electrical problems, replacing the entire motor assembly is usually the more reliable solution.
How long does a typical blower motor last in an Accord?
Lifespan varies with usage and environmental conditions, but many blower motors last several years under normal use. Factors like clogged cabin filters, debris ingress, and frequent high-load operation shorten service life. Choosing a unit with robust bearings and good construction improves longevity.
Can I install a replacement blower motor myself for the 2013-2017 Accord?
DIY installation is possible with basic tools and patience, since access is generally through the passenger footwell or glove box. Ensure you have the correct-fit motor, photograph wiring before removal, and verify the blower wheel clears the housing before final reassembly.
Final Verdict
Prioritize blower motor fitment, airflow consistency, and quiet operation when replacing the blower motor in a 2013-2017 Honda Accord. Tradeoffs typically occur between initial cost and long-term durability, so focus on build quality, bearing design, and electrical reliability to avoid repeat failures. By matching the motor to the Accord's mounting and connector requirements and addressing symptoms methodically, you can restore dependable cabin heating and cooling with minimal fuss.
Explore More:
- Check out all Honda Accord parts & accessories
- Explore Blower Motors Maintenance & Repair Guides
- Explore HVAC
- Browse all Auto Parts
