Note: This article contains affiliate links. If you click on these links and make a purchase, I may earn a small commission at no extra cost to you. This helps support my research and content. Read my full affiliate disclosure here.
A properly functioning oil filter housing is essential for maintaining oil pressure and preventing leaks on the Honda Accord 2.4L. If the housing or its seals fail you can see low oil pressure, visible leaks under the vehicle, or contamination risks that reduce engine longevity. This guide covers six top oil filter housings and related replacement options shortlisted for fit, sealing performance, and long-term durability specifically for the Accord 2.4L.Below we explain the key technical points to watch for and how each shortlisted option addresses common failure modes like gasket degradation and cracking. Read on to see which features matter most for reliable service and easier installation.
Looking for other parts? See all Honda Accord parts & accessories.
Top Picks at a Glance
| Best Overall The best all-around choice for most situations | AngyMeck Oil Filter Housing Case (15310R40A00) with 2 O-rings |  |
| Best Quality Built to a higher standard if you want something more solid | A-Premium Oil Filter Housing with 2 O-Rings for Honda 2.4L Engines |  |
| Best Value The sweet spot between price and what you get | NewYall Engine Oil Filter Housing Case for Honda 2.4L L4 (fits specified years) |  |
| Best Budget The cheapest option that still gets the job done reliably | PartsFlow Oil Filter Housing Case with O-Rings for Honda 2.4L L4 |  |
| Highest Rated A top-rated pick with lots of positive feedback | AUROLYNNE Oil Filter Housing Case for Honda 2.4L L4 (15310R40A00) |  |
| Most Popular A crowd favorite that many people choose with confidence | ULZOZN Oil Filter Housing with 2 Sealing O-rings (Replace 15310R40A00) |  |
1. AngyMeck Oil Filter Housing Case (15310R40A00) with 2 O-rings
| Part Number | 15310R40A00, 15310-R40-A00 |
|---|---|
| Compatible Vehicles | Accord 2008-2012, Civic 2012-2015, CR-V 2010-2014, Crosstour 2012-2015 |
| Material Type | Aluminum |
| Product Grade | Replacement Part |
This AngyMeck oil filter housing replaces the factory housing on select Honda 2.4L engines and comes with two O-rings to simplify installation. Made from aluminum with rubber seals, it houses the spin-on oil filter and restores a secure, leak-free connection between the filter and engine. Typical use is a direct swap for worn or cracked housings during routine maintenance or after a leak is found; the included O-rings remove the need to source seals separately. The housing lists compatibility with Accord 2008-2012, Civic 2012-2015, CR-V 2010-2014, and Crosstour 2012-2015 L4 2.4L engines, and the aluminum construction helps resist corrosion compared with some plastic aftermarket options. Limitations are that fitment is vehicle-specific so verify engine code and year before ordering, and as a replacement-grade aftermarket part it may differ slightly from factory fit and finish. For a balanced buyer this offers a practical way to repair an oil leak without replacing the entire assembly from the dealer.
Best for: Buyers who want a practical, vehicle-specific replacement to stop oil leaks and complete a repair themselves or through an independent shop, prioritizing durability and included seals over OE sourcing.
Less Ideal for: Those seeking an exact factory-sourced part or buyers unsure of their engine variant who need dealer verification before installing this housing.
- Aluminum construction improves corrosion resistance over cheaper plastic housings
- Includes two O-rings so you receive the main seals needed for installation
- Lists direct compatibility with Honda 2.4L models to simplify fitment checks
- Replacement-grade part designed to match factory part numbers for interchangeability
- Aftermarket replacement so finish and small dimensional tolerances may differ from factory parts
Verdict: A durable aluminum replacement housing with seals included that provides a straightforward, vehicle-specific fix for oil leaks on Honda 2.4L engines.
2. A-Premium Oil Filter Housing with 2 O-Rings for Honda 2.4L Engines
| Vehicle fitment | Honda 2.4L CR‑V/Civic/Accord/Crosstour (listed years) |
|---|---|
| Replaces | 15310-R40-A00 |
| Package contents | 1 oil filter base and 2 O-rings |
| Material | Rubber seals with metal housing (per listing) |
This A-Premium oil filter housing is a direct replacement designed for Honda 2.4L models and ships with two thickened seals for installation. It replaces the factory part number 15310-R40-A00 and is intended to be a plug-and-play swap that most DIYers or technicians can complete in about 15 minutes. The kit's main selling points are the included seals and the promise of an exact fit to reduce downtime and installation guesswork. In real-world use the housing lets you restore a leaking or damaged oil filter mount quickly and avoid the higher cost of buying an OEM assembly. Some buyers report clean fit and leak-free performance after installation, while others found machining imperfections or gasket fit issues that required minor filing or seal sealant to achieve a perfect mating surface. The manufacturer states a one-year unlimited-mileage warranty. If you need a straightforward replacement housing and are comfortable checking and finishing the mating surface during install, this kit delivers solid value; if you want guaranteed factory-surface finish with no prep work, consider a factory replacement instead.
Best for: Buyers who want a cost-effective, do-it-yourself replacement to restore a leaking or damaged oil filter housing on a Honda 2.4L and are willing to inspect and lightly prep the mating surface during installation.
Less Ideal for: Those who prefer an exact factory-finish part with no possibility of on-site adjustment or users unwilling to perform simple preparation should choose a factory-quality housing instead.
- Made to replace OEM part 15310-R40-A00 for direct fit on Honda 2.4L engines
- Includes two thickened seals so you have the necessary gaskets for installation
- Plug-and-play design intended for quick DIY or shop replacement in about 15 minutes
- Manufacturer offers a one-year unlimited-mileage warranty
- Some units show machining or casting imperfections on the mating surface requiring light finishing before install
- Gasket geometry may not seat perfectly in all cases and could need sealant or minor trimming
Verdict: A practical, lower-cost replacement housing that restores function quickly for Honda 2.4L owners who are comfortable inspecting and prepping the mating surface during install.
3. NewYall Engine Oil Filter Housing Case for Honda 2.4L L4 (fits specified years)
| Compatible engines | L4 2.4L Petrol only |
|---|---|
| Fitment | Accord 2008-2012, Civic/Crosstour 2012-2015, CR-V 2010-2014 |
| Manufacturer | NewYall |
| Item model number | 153l0-R40-A00 |
This NewYall oil filter housing is a direct replacement assembly meant for the 2.4L L4 petrol engines used in certain Honda Accord, Civic/Crosstour, and CR-V model years. It replaces the factory housing when the original is cracked or leaking and is installed in-line with the vehicle oil filter and associated O rings and gaskets. Buyers report it stops leaks and can save on dealer repair costs, and the package includes the housing with sealing components. Practical features include a one-piece housing design that simplifies swapping the old unit and compatibility specified for the L4 2.4L engine only. Some users note machining quality and gasket or O-ring fitment issues; in a few cases the supplied seals did not match the factory shape and required reuse of original parts or sourcing OEM gaskets. Expect a budget-friendly, functional replacement that is best for routine repair where perfect factory fitment is not critical and easier installation is preferred over a full OEM assembly for peace-of-mind fixes.
Best for: Buyers who prioritize a cost-effective, functional repair to stop oil leaks and get a working housing back in service quickly, without paying dealer prices.
Less Ideal for: Those seeking exact factory-fit replacement components or who want guaranteed perfect seal compatibility should consider purchasing a factory-quality housing or OEM seals instead.
- Specifically listed for Honda 2.4L L4 engines so fitment guidance is clear
- Simple one-piece housing design makes replacement straightforward
- Budget-friendly alternative to dealer parts that can stop oil leaks when compatible gaskets are used
- Some units show rough machining or lower build quality compared with factory parts
- Included O-rings and gaskets may not match factory shapes and sometimes need OEM replacements
Verdict: A practical, wallet-friendly replacement housing that fixes leaks on 2.4L Honda engines when you need a fast, affordable repair.
4. PartsFlow Oil Filter Housing Case with O-Rings for Honda 2.4L L4
| Vehicle suitability | Honda CR-V 2010-2014, Civic 2012-2015, Accord 2008-2012, Crosstour 2012-2015 — L4 2.4L |
|---|---|
| Package contents | 1x Oil Filter Housing Case; 2x Sealing O-Rings |
| Manufacturer | PartsFlow |
| Manufacturer part number | PF103507 |
This PartsFlow oil filter housing replaces the factory housing on Honda 2.4L L4 engines and ships with two sealing O-rings to simplify installation. It is typically used during routine maintenance or when the original housing leaks or is damaged; installers report it fits Accord (2008-2012), Civic (2012-2015), CR-V (2010-2014) and Crosstour (2012-2015) 2.4L engines. The package is compact and includes the main housing and replacement O-rings so you do not need extra parts for a basic swap. Buyers note straightforward fit and solid fitment for the listed years, and the material and finish appear comparable to other aftermarket housings at this price point. Limitations are the single-piece listing with only two O-rings included and the need to verify exact engine codes and model details before ordering; professional installation is recommended if you are not comfortable with coolant or oil passages. For budget-focused repairs this unit provides an economical, ready-to-install option that addresses common housing failures without adding extras beyond the essentials.
Best for: Buyers who need an affordable, no-frills replacement housing to repair a leaking or damaged oil filter housing on a Honda 2.4L engine and who prioritize cost-effective parts over premium branded options.
Less Ideal for: Do not choose this if you want a full accessory kit with extra seals or if you need a heavy-duty or performance-oriented housing for modified engines.
- Direct replacement for listed Honda 2.4L L4 models so fitment is likely when vehicle matches listing
- Includes two sealing O-rings so you get the basic hardware needed for a simple swap
- Compact package and lightweight part make handling and installation easier for DIYers or technicians
- Common aftermarket finish and construction comparable to other budget replacement housings
- Only two O-rings included and no additional seals or gaskets that some full kits provide
- Fitment must be double-checked against engine codes since listing covers several models and years
Verdict: A budget-friendly, ready-to-install replacement housing that provides the essential parts needed to fix a leaking oil filter housing on Honda 2.4L engines.
5. AUROLYNNE Oil Filter Housing Case for Honda 2.4L L4 (15310R40A00)
| Material | Aluminum |
|---|---|
| Product Grade | Replacement Part |
| Automotive Fit Type | Vehicle Specific Fit |
| Model | Oil Filter Housing Case |
This AUROLYNNE oil filter housing is a cast aluminum replacement made to match the factory housing for Honda 2.4L L4 applications. It replaces the factory unit and is typically used when the original housing is cracked, leaking, or during engine service that requires a new housing. The housing's aluminum construction should resist warping and tolerate engine bay heat better than some plastic alternatives. It installs as a direct replacement with the same mounting points and ports, so a professional or experienced DIYer can swap it without modifying surrounding components. Buyers report good sealing after proper gasket and sealant application and no leaks in months of use. Expect the usual caveats of replacement parts: you should inspect mating surfaces, use the correct gasket and torque specs, and consider professional installation if access is tight. Fitment is vehicle-specific so double-check model years and engine code before ordering.
Best for: Buyers who prioritize a reliable, factory-style replacement for a failing oil filter housing and want a durable metal part that matches factory fitment for Honda 2.4L engines.
Less Ideal for: If you prefer lightweight plastic housings for cost or want a universal, multi-vehicle part, this vehicle-specific aluminum housing is not the right choice.
- Aluminum construction offers better heat resistance and rigidity versus plastic housings
- Made as a vehicle-specific direct replacement to match factory mounting and ports
- Multiple buyers report good fit and no leaks when installed with proper gasket/sealant
- Sold by a brand that provides installation guidance and customer support
- Requires correct gasket and proper torque to prevent leaks which may add installation steps
Verdict: A sturdy, vehicle-specific aluminum housing that provides a durable, factory-style replacement for Honda 2.4L engines.
6. ULZOZN Oil Filter Housing with 2 Sealing O-rings (Replace 15310R40A00)
| Brand | ULZOZN |
|---|---|
| Material | Metal housing; Cellulose/Synthetic filter media |
| Product Grade | Replacement Part |
| Vehicle Service Type | Honda CR-V, Honda Civic, Honda Accord, Honda Crosstour |
| OEM Part Number | Replace 15310R40A00 |
This oil filter housing replaces part 15310R40A00 and is designed to plug into Honda 2.4L engines used in Accord, CR-V, Civic, and Crosstour model years listed. The metal housing and factory-style filter media work together to keep the oil circuit sealed and the engine oil clean while resisting corrosion and common underhood stresses. It ships with two sealing O-rings and is intended as a vehicle-specific replacement that installs the same way as the factory part. In practice the strong metal base improves resistance to impact and pressure changes compared with cheaper plastic housings, and the seller notes an improved sealing design to help stop leaks. Buyers should expect a replacement-level part rather than an upgraded performance component and confirm exact year and engine code before ordering. Installation is straightforward for a DIYer with basic hand tools but may require care to seat the O-rings correctly to avoid future leaks.
Best for: Buyers who prioritize a proven, factory-style replacement with evidence from other owners that it fits and stops leaks, and who want a straightforward install they can perform or verify at a shop.
Less Ideal for: If you want a performance-oriented or modified oiling solution, or need multi-vehicle compatibility beyond the listed Honda 2.4L models, this is not the right choice.
- Vehicle-specific design for listed Honda 2.4L applications
- Metal housing resists impact and internal pressure better than plastic alternatives
- Includes two sealing O-rings for immediate installation
- Made from corrosion-resistant materials to help longevity
- Sold as a replacement part, not a performance upgrade
Verdict: A sturdy, factory-style metal replacement housing that reliably fits Honda 2.4L models and includes O-rings to stop oil leaks.
Choosing the Right Honda Accord 2.4L Oil Filter Housing: Key Factors to Consider
Material and Casting Quality
The housing material and casting process determine resistance to cracking and long-term durability. Aluminum or reinforced composite housings each have distinct failure modes; porosity, thin walls, or poor mold release can accelerate cracking under thermal cycling. Pay attention to uniform wall thickness and clean machining where bolt flanges and sealing faces meet the engine block.
Higher manufacturing quality reduces the chance of stress fractures at mounting bosses and minimizes warping that can compromise the gasket seal. For the Accord 2.4L, the housing sees repeated temperature swings and vibration, so prioritize parts with visible machining marks on sealing surfaces and well-formed sensor ports to avoid leaks and misalignment.
Sealing Surface and Gasket Compatibility
Sealing performance is driven by the flatness of mating faces and the quality of the included gasket or O-ring. A warped flange or an underspecified gasket material will lead to slow leaks or sudden oil loss. Look for housings that include a properly sized gasket or seal made from oil-resistant elastomer and with a reliable cross-section to maintain compression over time.
For replacements, check whether the part uses a reusable O-ring, a paper-style gasket, or a molded rubber seal and confirm compatibility with the factory style used on the Accord 2.4L. A housing that supplies the correct seal reduces the chances of installation errors that produce seepage at common leak points.
Port and Thread Accuracy
Accurate ports and threads matter for attaching the oil filter, pressure sensors, and any bypass fittings without cross-threading or leakage. Mis-sized threads for the filter mount or oil pressure sensor can strip or allow seepage, which is especially problematic on a tight engine bay like the Accord 2.4L.
Inspect for clean, fully formed threads and confirm the housing provides correct thread pitch and depth. Properly machined ports ensure the filter seats squarely and that pressure readings remain reliable. This reduces the risk of damage during installation and improves long-term reliability.
Design for Serviceability
Serviceability affects how easily you can replace the housing or perform routine oil filter changes. Housings that offer straightforward access to mounting bolts, use common tool sizes, and avoid interference with nearby components make maintenance faster and less error-prone on the Accord 2.4L.
Consider whether the housing requires partial disassembly of adjacent components, if it includes guidance for torque specifications, and whether replacement gaskets or seals are included. A design that minimizes the need to remove ancillary parts saves time and reduces the chance of disturbing unrelated systems during service.
Thermal and Chemical Resistance
The housing and seal materials must withstand engine heat and continuous exposure to motor oil and contaminants. Oil additives and fuel dilution over time can degrade low-quality seal compounds, while repeated heating and cooling cycles can fatigue certain plastics and composites.
Choose housings with materials rated for high underhood temperatures and compatible with modern engine oils. Corrosion-resistant finishes on metal housings help protect mating surfaces and fasteners from seizing or leaking due to material breakdown.
Compatibility and Fitment Verification
Exact fitment to the Honda Accord 2.4L is essential. Even small deviations in bolt hole spacing, filter mounting height, or oil passage alignment will cause installation issues or leaks. Verify part numbers, mounting flange orientation, and the matching oil filter cartridge style before purchase.
Manufacturers sometimes offer multiple revisions for the same vehicle engine; confirm the housing matches the 2.4L configuration and sensor port locations used on your Accord. Proper fitment reduces installation time and ensures correct oil flow and pressure readings.
Common Symptoms of a Failing Oil Filter Housing
Recognizing early symptoms helps prevent catastrophic oil loss. Typical signs on the Accord 2.4L include visible oil pooling beneath the engine bay, dampness around the housing seam, and a sudden drop in oil pressure indicated on the instrument cluster. You may also notice burning oil smell if the leak reaches hot exhaust components.
Other symptoms include fluctuating oil pressure during warm-up and intermittent oil seepage around the filter mount. Paying attention to these warning signs allows you to diagnose housing issues before they cause engine damage.
- Visible oil drips under the engine
- Low or fluctuating oil pressure readings
- Oil seepage around the filter or housing seams
- Burning oil odor after driving
How a Proper Housing Affects Engine Oil Pressure
The oil filter housing directs oil through the filter and into the engine's lubrication passages. Any leak or internal bypass changes the system's pressure balance and can cause the pressure relief valve to cycle irregularly. On the Accord 2.4L, consistent pressure is required for proper cam and bearing lubrication.
A correctly sealing housing maintains stable oil flow and prevents the filter from collapsing under vacuum. Ensuring the housing is free of internal cracks and that the filter seats squarely reduces the risk of pressure-related engine wear.
- Maintains designed oil flow paths
- Prevents pressure drops that accelerate wear
- Keeps filter cartridge seated under all conditions
Replacing Gaskets and Seals During Service
Whenever the oil filter housing is removed, replace the gasket or O-ring regardless of visible condition. Gasket materials compress and relax with heat cycles and rarely retain full sealing capability after a single removal. For the Accord 2.4L, using the correct gasket style and ensuring the mating surfaces are clean are the simplest ways to avoid post-installation leaks.
Torque the housing bolts to the manufacturer's specification and follow a cross-pattern tightening sequence if applicable. After installation, run the engine briefly and inspect for leaks around the housing and filter mount before completing the job.
- Always replace gasket or O-ring on removal
- Clean mating surfaces thoroughly
- Use correct torque and tightening sequence
- Inspect for leaks after first start
Preventing Cracking and Extending Service Life
Thermal shocks, over-tightening, and improper torque can lead to hairline cracks or fractured mounting bosses. Avoid excessive torque on bolts and use calibrated tools to prevent distortion of the housing flange. If you suspect previous over-tightening, inspect for stress lines or deformation before installing a new gasket.
Regular oil changes and using appropriate oil viscosity reduce stress on the housing and filter system. Keeping cooling systems functioning correctly also helps limit extreme underhood temperatures that accelerate material fatigue.
- Use proper torque specs and tools
- Watch for visible stress lines or distortion
- Maintain regular oil change intervals
- Keep cooling system in good condition
Tools and Tips for a Clean Installation
Prepare a clean workspace and collect the correct sockets, torque wrench, and a new gasket or O-ring. Protect surrounding components from spilled oil and keep rags handy for cleanup. Label any sensor connectors removed so they return to the right positions.
Hand-start bolts to avoid cross-threading and use a torque wrench set to the specified value for final tightening. After installation, inspect sensor ports and the filter mounting face for any leftover debris that could affect the seal.
- Use clean rags and drip pans
- Hand-start threads before torquing
- Use a torque wrench for final tightening
- Check sensor connectors and ports for debris
Still looking for the perfect fit?
Select your Honda Accord configuration to see the most relevant Oil Filter Housings recommendations
How We Chose the Best Honda Accord 2.4L Oil Filter Housing
We focused our selection on parts and housings that address the most common durability and fitment challenges for the Honda Accord 2.4L. Primary evaluation criteria included material and casting quality to resist cracking, the integrity of sealing surfaces and included gaskets or seals, and dimensional accuracy to ensure correct alignment with the engine's oil passages. We also considered corrosion resistance, compatibility with common oil filter cartridges for the 2.4L configuration, and the ease of replacing the housing during routine maintenance.Technical fit checks were prioritized, including bolt pattern accuracy, thread quality for the filter attachment, and correct placement of oil pressure/sensor ports. We excluded items that lacked clear vehicle-specific fitment details or that depended on extensive modification. Also removed were housings that did not include a replacement gasket or seal as standard, since omission increases installation risk. The final shortlist balances build quality, sealing performance, and installation practicality for Accord 2.4L owners.
Our full evaluation process is outlined in our review methodology.
FAQ
What are the most common causes of an oil filter housing leak on the Accord 2.4L?
Leaks often stem from degraded gaskets or O-rings, warped or cracked housing flanges, and improperly torqued bolts. Environmental factors like heat cycling and vibration can accelerate seal failure, and previous over-tightening or cross-threading can also create leak paths.
Can I replace just the gasket instead of the whole oil filter housing?
Often a gasket replacement will stop minor leaks if the housing faces and bolt bosses are undamaged. However, if the housing shows cracks, warping, or damaged threads, replacing the entire housing is the safer option to avoid recurrence.
How can I tell if the housing is cracked versus the gasket failing?
Clean the area and dry it, then run the engine briefly and observe for active seepage. A fine hairline crack may spray oil or produce a film that runs away from the gasket joint. Pressure testing or visual inspection under good light often reveals cracks near mounting bosses or edges where gaskets do not contact.
Is it necessary to replace the oil filter when swapping the housing?
Replacing the oil filter during housing service is generally recommended because the filter will be disturbed and the system opened. Installing a fresh filter minimizes the risk of contamination and ensures the filter element mates properly with the new housing.
How long should a quality replacement housing last on the Accord 2.4L?
A properly made housing installed correctly can last many years and multiple oil change intervals. Lifespan depends on driving conditions, maintenance practices, and thermal stress, but robust housings typically outlast cheaper units if installed with correct torque and sealing procedures.
What should I check after installing a new housing to ensure there are no leaks?
After installation, hand-tighten and torque bolts to specification, start the engine, and inspect the housing perimeter, filter mount, and sensor ports for seepage. Recheck torque after a short test drive and verify oil pressure readings remain steady during warm-up.
Final Verdict
When choosing an oil filter housing for the Honda Accord 2.4L, prioritize parts that offer accurate fitment, solid sealing surfaces, and strong casting or molded construction. Tradeoffs typically involve material choice versus weight and cost, but the most important factors are gasket compatibility and port/thread accuracy to avoid leaks and sensor issues.Focus on housings that include the correct gasket or O-ring, show clean machining of sealing faces, and match the Accord 2.4L mounting geometry. With those priorities in mind you can select a component that reduces repair frequency and maintains reliable oil pressure for long-term engine protection.
Explore More:
- Check out all Honda Accord parts & accessories
- Explore Oil Filter Housings Maintenance & Repair Guides
- Explore Engine
- Browse all Auto Parts
