Note: This article contains affiliate links. If you click on these links and make a purchase, I may earn a small commission at no extra cost to you. This helps support my research and content. Read my full affiliate disclosure here.
If you own a 2013-2017 Honda Accord, a good fender liner is a simple way to prevent road grime, water, and salt from accelerating rust and damaging suspension parts. The right liner restores a proper barrier inside the wheel well, reduces road noise, and helps maintain factory drainage paths so the car ages more predictably.This guide shortlists seven top options that suit the 2013-2017 Accord chassis, focusing on fitment, material durability, and ease of installation. Below you will find clear evaluation criteria and practical advice to help you pick a liner that meets your maintenance goals. Read on for what matters when replacing or upgrading the wheel well barrier.
Looking for other parts? See all Honda Accord parts & accessories.
Top Picks at a Glance
| Best Overall The best all-around choice for most situations | TRQ Front Inner Fender Liner Set for 2013-2015 Honda Accord Sedan |  |
| Best Quality Built to a higher standard if you want something more solid | A-Premium Front Inner Fender Liner Pair for Honda Accord 2016-2017 Sedan |  |
| Best Value The sweet spot between price and what you get | KUAFU Front Inner Fender Liner Set for 2013-2015 Honda Accord Sedan |  |
| Best Budget The cheapest option that still gets the job done reliably | ALING Front Right Inner Fender Liner for 2013-2015 Honda Accord |  |
| Highest Rated A top-rated pick with lots of positive feedback | TRQ Front Passenger Inner Fender Liner for 2013–2015 Honda Accord Coupe |  |
| Most Popular A crowd favorite that many people choose with confidence | Parts N Go Front Right Fender Liner for 2013–2015 Honda Accord Sedan |  |
| Best Seller A high-volume bestseller chosen again and again | Parts N Go Front Fender Liner Set with Clips for 2013–2015 Accord Sedan |  |
1. TRQ Front Inner Fender Liner Set for 2013-2015 Honda Accord Sedan
| Auto Part Position | Front |
|---|---|
| Compatible with Vehicle Type | Car |
| Included Components | 2 Piece Inner Fender Liner Set |
| Manufacturer Warranty Description | 2 years |
This TRQ two-piece inner fender liner set replaces both front driver and passenger side liners on 2013–2015 Honda Accord sedans. Designed as a vehicle-specific fit, the kit arrives with pre-assembled components that simplify installation and aim to match factory contours so you can refit the wheel wells without trimming or modification. In use the liners protect the engine bay and suspension from road splash, dirt, and debris while restoring a clean factory appearance after crash or corrosion damage. Notable features include direct-fit compatibility with the listed reference numbers and a machined exterior finish for a uniform look under the fender. Practical benefits are straightforward: faster DIY replacement with less need for special tools and parts that align with factory mounting points. Limitations are that fitment is limited to the 2013–2015 Accord sedan front positions only and the kit covers inner liners rather than outer splash guards or related trim pieces, so additional parts may be needed for fuller repair jobs.
Best for: Buyers who want a balanced, practical replacement that restores front wheel-well protection with an emphasis on ease of installation and factory-style fit for a 2013–2015 Accord sedan.
Less Ideal for: People needing a complete wheel-well repair including outer splash guards, or owners of Accord coupes, wagons, or other model years seeking broader compatibility.
- Vehicle-specific direct-fit design for 2013–2015 Accord sedan front sides
- Includes both driver and passenger front inner fender liners in one kit
- Pre-assembled components intended to speed up DIY installation
- Matches factory mounting reference numbers for straightforward replacement
- Only fits 2013–2015 Honda Accord sedan front; not suitable for other years or body styles
- Covers inner liners only and does not include outer splash guards or additional trim
Verdict: A straightforward, vehicle-specific two-piece front inner fender liner kit that restores factory-style protection and simplifies DIY replacement for 2013–2015 Honda Accord sedans.
2. A-Premium Front Inner Fender Liner Pair for Honda Accord 2016-2017 Sedan
| Compatible with Vehicle Type | Car |
|---|---|
| Auto Part Position | Front Left Inner, Front Right Inner |
| Material Type | Plastic (LLDPE) |
| Fit Type | Vehicle Specific Fit |
These A-Premium front inner fender liners replace the factory front driver and passenger liners on 2016-2017 Honda Accord sedans. Made by injection molding from LLDPE, the pair is intended to match factory dimensions and mount points so installation uses existing clips and hardware. The product highlights include robotic CNC drilling and OE replacement molds to reduce fitment gaps and avoid extra trimming. In use the liners protect the wheel wells, engine bay, and suspension components from road debris, salt, and water while preserving airflow around brakes and suspension for consistent performance. The set is supplied with insulation foam and clips to help reduce road noise. Limitations are that these are aftermarket parts rather than factory originals and the listing does not include detailed fitment instructions or vehicle-specific fasteners beyond clips, so some installations may require minor adjustments or additional hardware depending on vehicle condition. For performance-minded owners who want durable, factory-shaped protection without heavy modification, these liners are a practical replacement.
Best for: Drivers focused on maintaining or restoring factory-style protection and noise control on a 2016–2017 Accord sedan who want a durable, performance-friendly replacement that preserves wheel-well airflow and component protection.
Less Ideal for: Buyers looking for an exact factory-branded part or a plug-and-play kit that guarantees every fastener is included without any adjustment should consider looking elsewhere.
- Injection-molded LLDPE construction matched to factory mold for consistent shape and durability
- Robotic CNC drilling and OE replacement mold reduce need for trimming and improve fit
- Includes clips and insulation foam to aid installation and reduce road noise
- Vehicle-specific fit for front left and right on 2016-2017 Accord sedans
- Aftermarket part that may require minor adjustments or additional fasteners during installation
Verdict: A durable, vehicle-specific pair of injection-molded front fender liners that restore factory-style protection and noise reduction for 2016–2017 Honda Accord sedans.
3. KUAFU Front Inner Fender Liner Set for 2013-2015 Honda Accord Sedan
| Compatible with Vehicle Type | 2013-2015 Honda Accord Sedan |
|---|---|
| Included Components | 1 Pair of Front Inner Fender Liners |
| Material Type | PE Plastic |
| Auto Part Position | Front Inner |
These KUAFU front inner fender liners replace the factory liners on 2013–2015 Honda Accord sedans and are sold as a driver and passenger pair. Made from PE plastic, they are lightweight yet resistant to everyday road debris and should protect wiring, brake components, and body panels from mud and stones. The liners are described as direct replacements so installation is straightforward for anyone comfortable with basic trim removal and fastener reuse, but mounting hardware and instructions are not included so you may need standard clips or screws from your original liners. The finish is an unfinished black that blends under the wheel well; the material helps keep splash and grime out and may slightly improve airflow compared with missing liners. Expect a budget-friendly, functional replacement that covers the same areas as the factory pieces, though fit and hole alignment can require minor trimming or adjustment on some cars during installation.
Best for: Buyers looking for a cost-effective, direct-replacement inner liner to restore protection around the front wheel wells of a 2013–2015 Accord and who prefer a no-frills part that performs the essential job.
Less Ideal for: Those who want a fully finished, painted appearance out of the box or who expect included fasteners and step-by-step installation guides should consider other options or plan to source hardware separately.
- Vehicle-specific fit for 2013–2015 Honda Accord sedans for straightforward replacement
- Made from PE plastic for light weight and good impact resistance
- Includes both driver and passenger front inner liners in one package
- Helps protect inner wheel well components from dust, debris, and road splash
- Does not include mounting hardware or installation instructions
- Unfinished surface may require cleaning or treatment to match nearby trim
Verdict: A practical, budget-oriented replacement pair that restores front wheel well protection on 2013–2015 Honda Accord sedans without unnecessary extras.
4. ALING Front Right Inner Fender Liner for 2013-2015 Honda Accord
| Auto Part Position | Front Right |
|---|---|
| Compatible with Vehicle Type | Car |
| Material Type | Acrylonitrile Butadiene Styrene |
| OEM Equivalent Part Number | 74100T2AA00-PFM |
This ALING front right fender liner is a direct-fit replacement made of ABS intended to restore the wheel well splash shield on 2013 to 2015 Honda Accord passenger-side front wheels. It installs in the same mounting area as the factory piece and is used to block road spray, dirt, and debris from entering the engine bay and suspension area. The liner is sold as a single unit and advertises vehicle-specific fit guided by the OEM equivalent number. In practice the ABS construction keeps it lightweight yet rigid enough for normal road use, and buyers report straightforward installation with common fasteners. Important limitations are that it is a single-side piece and comes without clips or hardware, so you may need to reuse existing retainers or buy new fasteners. Also there is no manufacturer warranty listed, so replacement or fitment issues rely on seller support. For a budget-focused repair this liner restores protection and appearance without the cost of a dealer part.
Best for: Buyers wanting an inexpensive, direct-fit repair part to restore splash protection and appearance on a 2013–2015 Accord without paying dealer prices.
Less Ideal for: Those who prefer a replacement with included fasteners, extended warranty coverage, or who need both left and right liners in one purchase.
- Vehicle-specific fit for 2013–2015 Honda Accord front right position
- Made from ABS for a lightweight but reasonably durable replacement
- Sold as a single OEM-equivalent part number for direct identification
- Reported easy installation and good fit by multiple buyers
- Does not include mounting clips or hardware
- No manufacturer warranty is listed
Verdict: A cost-effective, vehicle-specific ABS front-right fender liner that restores protection and fit for 2013–2015 Honda Accord owners looking to repair without dealer prices.
5. TRQ Front Passenger Inner Fender Liner for 2013–2015 Honda Accord Coupe
| Auto Part Position | Front Right |
|---|---|
| Compatible with Vehicle Type | Car |
| Automotive Fit Type | Vehicle Specific Fit |
| Material Type | Plastic |
This TRQ inner fender liner is a direct-replacement plastic panel intended to restore the wheel-well protection on the front passenger side of a 2013–2015 Honda Accord Coupe. It keeps road debris, water, and salt away from the fender apron and suspension components and is typically used when the original liner is cracked, torn, or missing after minor collisions or corrosion. The part is sold as a single pre-molded liner that matches original mounting points for an easier swap and TRQ supplies installation videos to guide DIYers. In practice the liner provides the expected splash protection and an immediate restoration of fit and appearance. Buyers report straightforward installs but a minority note occasional misaligned holes that require a drill or a few extra push pins. The plastic material is lightweight and resists rust but is not unusually thick, so it performs well for normal street use though it may be less durable under heavy off-road abuse. For reliability-focused repairs it offers a close, economical replacement that gets the protection back where it belongs with minimal modification.
Best for: Buyers who prioritize restoring reliable wheel-well protection quickly and affordably, and who prefer a direct-replacement part they can install or have installed with minimal fuss.
Less Ideal for: Not the best choice for drivers needing a heavy-duty or reinforced liner for off-road use or extreme conditions where thicker panels are required.
- Vehicle-specific fit designed for the front passenger side of 2013–2015 Honda Accord Coupes
- Pre-molded shape restores splash protection and keeps debris away from suspension and body panels
- Includes access to step-by-step installation videos to help DIY replacement
- Lightweight plastic resists corrosion and restores appearance quickly
- Aftermarket hole locations can be slightly off requiring drilling or extra adjustment during installation
- Material is serviceable for road use but not as thick or heavy-duty as some factory or premium aftermarket liners
Verdict: A cost-effective, vehicle-specific replacement that restores front passenger-side splash protection on 2013–2015 Honda Accord Coupes with minimal modification.
6. Parts N Go Front Right Fender Liner for 2013–2015 Honda Accord Sedan
| Fitment | 2013, 2014, 2015 Accord Sedan |
|---|---|
| Position | Front Right passenger side |
| Replaces part numbers | 74100T2AA00, HO1249150 |
| Manufacturer | Parts N Go |
This Parts N Go fender liner replaces the front right passenger-side wheel well liner on 2013–2015 Honda Accord sedans. It is an aftermarket, vehicle-specific piece molded to match the factory shape so installation typically only requires removing the wheel or wheel well fasteners, positioning the liner, and reinstalling clips or screws. The liner is described as durable and built to OEM specifications, but several buyers note the plastic is thinner than factory and it lacks the factory-applied sound deadening strip. That means it protects against road splash, debris, and moisture like the original but offers slightly less acoustic insulation. Fitment reports are mixed: many users say the holes line up and the part snaps into place after warming in the sun, while others drilled or adjusted fastener locations. No mounting hardware is included, so plan to reuse or buy new clips. For a budget replacement that restores protection to a damaged wheel well this does the job, though buyers seeking factory-level material and noise control may prefer an OEM part.
Best for: Buyers who prioritize restoring wheel-well protection at lower cost and value social proof from other owners who have successfully installed the part.
Less Ideal for: Drivers who need factory-equivalent noise insulation or the highest-quality materials should consider buying a genuine Honda replacement instead.
- Vehicle-specific fit for 2013–2015 Accord sedans for direct replacement of the OEM part number listed
- Made to match factory shape so it restores splash and debris protection
- Durable thermoplastic construction suitable for typical road conditions
- Many users report it fits without modification after warming the plastic and using proper clips
- Thinner material than the factory liner and no factory-applied sound deadening material
- Mounting hardware is not included so new clips or fasteners may be required
- Some units have poorly aligned holes requiring drilling or adjustment during install
Verdict: A budget-friendly, vehicle-specific replacement that reliably restores splash and debris protection for 2013–2015 Accord sedans.
7. Parts N Go Front Fender Liner Set with Clips for 2013–2015 Accord Sedan
| Fitment | 2013-2015 Accord Sedan Front |
|---|---|
| Included Components | Splash Guard and clips |
| Material Type | Plastic |
| Manufacturer Warranty Description | One Year Manufacturer Warranty |
These Parts N Go fender liners are a direct replacement set for the front driver and passenger sides of 2013–2015 Accord sedans and include the clips needed for installation. They are molded plastic parts intended to fit factory mounting points and replace Honda part numbers 74150T2AA00 and 74100T2AA00. In practical use they keep road grime, water, and debris away from the wheel wells and engine bay the same way factory splash guards do. Buyers report the pieces line up with factory holes and install without modification, but several users note the plastic is thin and the supplied clips can feel flimsy, so careful handling during installation is recommended. The set is useful for repairing damage from road debris or replacing missing liners after winter wear. The product comes with a one year manufacturer warranty, but expect the material to be less heavy-duty than OEM on vehicles that see frequent rough-road exposure or off-road use.
Best for: A cautious buyer wanting a direct, no-modification replacement for worn or damaged front splash guards on a 2013–2015 Accord sedan who values correct fit and an included clip kit.
Less Ideal for: Drivers who frequently drive on rough unpaved roads or need a heavy-duty, impact-resistant liner should consider more robust aftermarket or reinforced options.
- Vehicle-specific design that targets 2013–2015 Accord sedan front wheel wells
- Includes retaining clips for installation so no separate fasteners are required
- Replaces listed factory part numbers for straightforward fitment and alignment
- Plastic construction is relatively thin compared with heavier factory parts which may reduce long-term durability
- Some buyers reported flimsy or insufficient clips requiring replacement or spacing adjustments
Verdict: Choose this Parts N Go set if you want a vehicle-specific, clip-in replacement that fits 2013–2015 Accord sedans without modification.
Choosing the Right 2013-2017 Honda Accord Fender Liner: Key Factors to Consider
Fitment and Alignment
A liner that matches the 2013-2017 Accord wheel well geometry minimizes gaps where water and debris can enter. Proper fitment means the part aligns with factory mounting tabs and screw holes so installation is straightforward and the liner sits flush against the inner fender.
Poor alignment often leads to rubbing against tires or suspension components, which accelerates wear or causes abrasion holes. When assessing fitment, check whether the liner is listed specifically for 2013, 2014, 2015, 2016, and 2017 Accord trims and whether it covers both front and rear wheel wells where applicable. Correct fitment reduces the need for trimming or extra fasteners, saving time and ensuring the liner maintains full protective coverage.
Material Durability
Material choices affect how a liner withstands impacts, temperature cycles, and chemical exposure. Thermoplastic materials like high-density polyethylene or polypropylene are common because they resist cracking, flex under minor impacts, and do not corrode. Thicker sections at high-wear zones, such as the leading edge of the wheel well and mount points, improve longevity.
Consider resistance to road chemicals and salt if you drive in winter conditions, since materials that absorb water or degrade quickly will defeat the liner's purpose. Also evaluate whether the material remains flexible in cold weather to prevent brittle failures. A durable liner reduces the frequency of replacement and protects metal panels from premature rust.
Mounting Hardware and Compatibility
Check what mounting hardware is required and whether it is included. A complete kit with screws, clips, or push rivets that match Accord factory standards simplifies installation and ensures secure attachment. Missing or incorrect fasteners can leave sections loose and allow debris intrusion.
Compatibility extends to whether the liner uses existing factory holes or requires drilling new ones. Using factory mounting points reduces the risk of misalignment and preserves the vehicle's original structure. For owners who prefer a quick DIY job, parts that reuse OEM fasteners or provide clear hardware mapping will be more practical.
Resistance to Moisture and Corrosion
The primary protective role of a fender liner is to prevent water and road salt from contacting inner panels and suspension parts. The liner itself should not trap moisture against metal surfaces; it should channel water away and allow drainage. Materials that wick moisture or develop cracks can create pockets where corrosion accelerates.
Assess whether the liner design maintains or improves drainage paths and whether it creates sealed pockets. A good liner reduces long-term corrosion risk to inner fenders and adjacent components. Where metal clips or screws are used, compatibility with rust-resistant fasteners is another important consideration.
Ease of Installation and Maintenance
Installation difficulty affects cost and whether you can replace the liner yourself. A design that snaps into existing tabs or uses common fasteners can be installed with basic tools in a driveway. Clear instructions and included hardware reduce the chance of errors that leave gaps or loose sections.
Maintenance considerations include how easily the liner can be removed for cleaning or inspection and whether it resists sludge buildup. Parts that allow simple access to drain holes and suspension components without repeated trimming make routine servicing less time-consuming. Ease of removal is also important if you need to inspect for rust or repair related components.
Noise Dampening and Fit Finish
Beyond protection, liners can reduce road and tire noise transmitted into the cabin. A liner that fits tightly and uses vibration-damping material or thicker plastics in strategic areas can cut down on rattles and wind-driven noise. The quality of the finish around edges and mounting points also matters for long-term quietness.
A sloppy fit or thin, flappy material will increase noise and may require additional insulation. Consider liners that emphasize a clean fit with minimal gaps and secure mounting to preserve both acoustic comfort and perceived build quality of the vehicle.
When to Replace a Fender Liner on a 2013-2017 Accord
Inspect the wheel wells regularly for cracking, missing sections, or rub-through where the liner contacts tires or suspension parts. Visible holes, large deformations, or fasteners that no longer hold indicate the liner has lost its protective function.
Replacement is also sensible after collision damage, significant road debris impact, or if you notice persistent mud accumulation that will not clear with normal driving. Addressing a failing liner promptly prevents water and salt from accelerating corrosion on the inner fender and nearby components.
- Check after winter seasons or prolonged gravel road use
- Look for oil or fluid pooling behind the liner that suggests drainage blockage
- Replace if mounting tabs are broken or the liner no longer secures to factory points
DIY Removal and Basic Installation Steps
Removing and installing a fender liner on the 2013-2017 Accord is often manageable with basic hand tools. Start by turning the wheel to gain access to the inner well, remove any splash shields or wheel arch covers, and then unfasten the screws, clips, or rivets that hold the liner in place.
When installing the replacement, align the liner with factory holes before inserting fasteners to prevent pinching or misalignment. Take care to route any attached wiring or harnesses back into their original positions and verify that drain channels are unobstructed before finishing.
- Use a trim panel tool to release clips without damaging surrounding paint
- Organize removed fasteners so you can reuse OEM hardware where applicable
- Test fit before final fastening to avoid trimming the part unnecessarily
Common Trimming and Fitment Tips
Some aftermarket liners require minor trimming to clear suspension arms or to accommodate optional equipment. Always test-fit the liner and mark any necessary cut lines with a grease pencil before trimming. Trim incrementally to avoid removing more material than needed.
For a clean result, deburr cut edges and use fasteners to secure any trimmed sections to prevent movement. If the liner must be trimmed to clear factory brackets, ensure the modified edge still protects critical areas from direct spray and grit.
- Trim small amounts and re-test fit often
- Seal exposed edges if trimming reveals inner foam or layered materials
- Avoid cutting mounting tabs; instead, relocate or re-drill holes if necessary
How Liner Design Affects Drainage and Rust Prevention
A well-designed liner preserves the factory drainage geometry so water flows away from vulnerable metal surfaces. Look for liners that incorporate channels or contours that align with the Accord's existing drainage points rather than sealing off water paths.
Poorly shaped liners can trap moisture against the inner fender, creating conditions for corrosion. When evaluating designs, consider how easily water and road salt will be shed and whether the liner provides ventilation to allow trapped moisture to evaporate.
- Prefer liners that avoid creating sealed pockets against metal panels
- Check that drain holes and splash guard openings remain accessible
- Consider periodic removal for inspection in wet climates
Selecting Between Plastic Types and Flexible Materials
Different plastics offer tradeoffs between rigidity and impact absorption. Rigid panels resist deformation from curbs and heavy debris but may be more prone to cracking on hard impacts. Flexible liners conform to irregularities and absorb impacts but may have more vibration or noise if not well supported.
For the Accord, consider a balance where the liner is flexible enough to resist cracking in cold weather but thick enough to resist repeated stone strikes. Also evaluate whether the material chemically resists road salt and oil exposure to avoid premature degradation.
- Rigid plastics offer strong puncture resistance
- Flexible polymers reduce brittle failure in cold climates
- Composite or layered designs can combine benefits of both
Still looking for the perfect fit?
Select your Honda Accord configuration to see the most relevant Fender Liners recommendations
How We Chose the Best 2013-2017 Honda Accord Fender Liner
We prioritized objective, vehicle-specific filters to narrow candidates for the 2013-2017 Honda Accord. Primary evaluation criteria included exact fitment to the Accord 2013 through 2017 wheel wells, material composition and impact resistance, and corrosion resistance where metal fasteners or exposed panels are nearby. We also weighed installation complexity and whether the liner integrates with factory mounting points to avoid trimming or modification.Durability in real-world road conditions was a key factor. That meant assessing the thickness and flexibility of plastics, resistance to cracking in cold weather, and the liner 027s ability to shed mud and moisture. Noise dampening and how well the liner preserves OEM drainage channels were considered because they affect long-term body health and driving comfort. Finally, we considered how straightforward replacement and maintenance are for a typical DIYer or technician.We excluded liners without clear vehicle-specific fitment information, generic universal liners that require extensive trimming, or materials known to become brittle quickly. The remaining selection reflects parts that balance fit, protection, and installation practicality for Accord owners.
Our full evaluation process is outlined in our review methodology.
FAQ
How long should a fender liner last on a 2013-2017 Honda Accord?
Lifespan depends on driving conditions but liners typically last several years. Regular inspection after winter or rough roads helps catch damage early so you can replace a failing liner before it contributes to corrosion or component wear.
Can I replace the fender liner without removing the wheel?
In some cases you can access fasteners with the wheel turned for better clearance, but removing the wheel often makes the job easier and gives full access to clips and screws. Removing the wheel also reduces the chance of missing hidden fasteners during installation.
Will a replacement liner affect factory drainage or cause rust?
A properly fitted liner should preserve factory drainage and help prevent rust. Problems arise when a liner is poorly aligned or blocks drain paths, so choose a part that matches the 2013-2017 Accord geometry and verify drain openings during installation.
Are universal or generic liners a good option for the Accord?
Generic liners often require extensive trimming and may not reproduce factory mounting points. While they can be a temporary fix, vehicle-specific liners that align with factory holes offer better protection and a more secure fit for long-term use.
Do I need special tools to install a new liner?
Most installations require common hand tools like a ratchet, screwdrivers, and a trim removal tool for clips. Specialty rivet tools may be needed if pop rivets are used, but many kits include fasteners that are compatible with basic tools.
Should I replace front and rear liners at the same time?
It depends on condition. If one liner shows significant wear or damage, inspect the others. Replacing both front or both rear liners together can ensure consistent protection and similar material aging on the same axle.
Final Verdict
For the 2013-2017 Honda Accord, prioritize a liner that provides accurate fitment, durable material performance, and compatibility with factory mounting points. Those attributes most directly protect inner fenders, suspension components, and drainage paths while reducing noise and maintenance time.Balance durability against installation complexity: choose a part that secures cleanly to existing tabs and allows easy access for cleaning and inspection. That approach will give you reliable protection and minimize the risk of corrosion over the vehicle 027s remaining life.
Explore More:
- Check out all Honda Accord parts & accessories
- Explore Fender Liners Maintenance & Repair Guides
- Explore Body & Exterior
- Browse all Auto Parts
