Note: This article contains affiliate links. If you click on these links and make a purchase, I may earn a small commission at no extra cost to you. This helps support my research and content. Read my full affiliate disclaimer here.
Picking the right wheel hub assembly for your Hyundai Tucson matters for steering precision, safety, and ride comfort. A worn or damaged hub can cause vibration, noise, and uneven tire wear, so replacing it promptly helps keep your vehicle predictable and safe. This guide highlights seven shortlisted wheel hub assemblies chosen for fitment and bearing quality. We evaluated each option for durability and bearing performance, and the sections below explain what to look for and why those factors matter. Read on to find the right hub assembly for your Tucson and get clear next steps for installation.
Looking for other parts? See all Hyundai Tucson parts & accessories.
Top Picks at a Glance
| Best Reviewed A top-rated pick with lots of positive feedback | Autoround 512553 Rear Wheel Hub and Bearing Assembly with ABS |  |
| Most Popular A crowd favorite that many people choose with confidence | TRQ Front Wheel Bearing & Hub Assembly Set (2-piece) |  |
| Best Quality Built to a higher standard if you want something more solid | A-Premium Front Right Steering Knuckle with Wheel Bearing Hub Assembly |  |
| Best Budget The cheapest option that still gets the job done reliably | maXpeedingrods Rear Wheel Bearing and Hub Assembly (512553) |  |
| Most Sold A high-volume bestseller chosen again and again | Detroit Axle AWD 4‑Piece Wheel Bearing Hub Assembly Kit for Hyundai Tucson (2016–2021) |  |
| Best Value for Money The sweet spot between price and what you get | PHILTOP 513374 Front Wheel Hub and Bearing Assembly (pair) |  |
| Best Overall The best all-around choice for most situations | Detroit Axle Rear Wheel Hub Bearing Assembly, 2‑pc with ABS (5‑lug) |  |
1. Autoround 512553 Rear Wheel Hub and Bearing Assembly with ABS
| Bearing Number | 512553 |
|---|---|
| Bearing Type | Ball Bearing |
| Material Type | Alloy Steel |
| Compatible Lubricant | Grease |
This Autoround 512553 rear wheel hub assembly is a direct-replacement style unit that integrates the bearing and ABS tone ring to restore wheel rotation and ABS sensor feedback on compatible Hyundai models. It is typically used when a worn bearing causes noise, play, or an ABS warning; installation replaces the entire hub rather than rebuilding the original bearing. Notable features include a five-lug pattern and factory-style ABS provision, plus manufacturing in alloy steel and grease-compatible lubrication. In practice the unit offers straightforward fitment and fixed alignment of the tone ring so the ABS sensor reads correctly, which reduces diagnostic steps and gets the vehicle back on the road quickly. Reports from users indicate consistent fit for late-model Hyundai applications and an OEM-like feel. Limitations are that this is an aftermarket branded assembly rather than a factory part and long-term durability beyond the returned customer timeframe is not guaranteed by the listing, so drivers wanting extended service life may prefer a named OEM replacement or shop-installed upgraded option.
Best for: Reliability-focused buyers who prioritize restoring safe wheel operation and ABS function quickly with a direct-fit replacement for their Hyundai Tucson.
Less Ideal for: Owners seeking a long-term OEM-branded replacement or a performance/upgraded hub should consider dealer parts or specialty options instead.
- Integrated bearing and ABS tone ring for straightforward replacement and restored ABS function
- Five-lug fitment matches common Hyundai rear hubs for direct installation
- Manufactured from alloy steel and specified for grease lubrication, matching typical service practices
- Multiple user reports of accurate fit and resolved ABS issues on compatible Hyundai models
- Aftermarket branded unit rather than factory-made which may affect long-term durability expectations
- Listing provides limited long-term warranty information and longevity beyond early user reports is unknown
Verdict A practical, direct-fit aftermarket rear hub assembly that reliably restores wheel and ABS function on compatible Hyundai Tucsons but is not a factory-branded unit.
2. TRQ Front Wheel Bearing & Hub Assembly Set (2-piece)
| Brand Name | TRQ |
|---|---|
| Bearing Type | Ball Bearing |
| Included Components | 2 Front Wheel Bearings, 2 Front Wheel Hubs |
| Material Type | Alloy Steel |
| Specification Met | ISO 16949 |
This TRQ kit supplies two front wheel hubs and two wheel bearings intended as direct-replacement components for the front of compatible Hyundai and Kia models. It is built for straightforward DIY or shop swaps: the assemblies come pre-assembled where applicable and include the hardware needed for left and right sides so you can replace both hubs in one job. Notable features are ball-type bearings, factory-style fitment references, and TRQ support materials including installation videos to aid a convenience-focused owner. In practice the parts restore smooth, quiet rotation and remove bearing hum if the originals are worn, and several users report easy bolt-in installs with no modifications. Limitations to expect are occasional quality-control variability reported by some buyers, and a few owners have noted wheel-stud or sensor connector differences that required minor adjustments. For drivers who want a cost-effective, ready-to-install hub set that minimizes time in the garage, this kit delivers good value, but those seeking the highest-end longevity may prefer premium branded alternatives.
Best for: Practical, convenience-driven buyers who prioritize a ready-to-install, value replacement that minimizes garage time and supports DIY installation with tutorial resources.
Less Ideal for: Buyers seeking an ultra-premium, long-life bearing solution for heavy-duty use or those unwilling to inspect parts on arrival should consider higher-end branded alternatives or professional-sourced hubs.
- Direct-fit front hub and bearing replacements for the listed Hyundai/Tucson fitments, reducing installation time.
- Includes both left and right assemblies so you can replace both sides in one service visit.
- Ball-bearing design and pre-assembled components restore quiet rotation and eliminate common bearing noise.
- Manufacturer provides DIY videos and compatibility references to simplify installation.
- Some customers report inconsistent quality control, including metal debris or early failure in isolated cases.
- Wheel studs and speed-sensor connector fitment may not match every submodel exactly, requiring minor modification or reuse of original studs.
Verdict A convenient, cost-effective direct-fit front hub and bearing kit for Tucson owners who want a quick DIY replacement, with occasional QA variability to check for on arrival.
3. A-Premium Front Right Steering Knuckle with Wheel Bearing Hub Assembly
| Fitment | Hyundai Tucson 2010-2013 L4 2.0L/2.4L; Kia Sportage 2011 L4 2.4L |
|---|---|
| Position | Front Right Passenger Side |
| Condition | Brand New |
| Loaded Knuckle Included | Yes |
| Bearing Included | Yes |
This loaded steering knuckle assembly combines the knuckle, hub and bearing into a single front right passenger-side unit intended for Hyundai Tucson 2010–2013 (2.0L and 2.4L) and Kia Sportage 2011 (2.4L). It installs in place of the factory unit to address symptoms like hard braking, wheel vibration, uneven tire wear and pulling, and is used during suspension repairs or when replacing a worn hub bearing. The assembly ships ready to bolt in with the hub and bearing preinstalled which speeds replacement and reduces press-fit work. Buyers report good fitment and protected packaging, though one user noted the included washer and nut differed from the original and required combining parts to secure the CV axle nut. The unit is steel construction and comes with a one-year guarantee; because axle hardware may vary, check fitment details and have appropriate torque and cotter-pin clearances on hand during installation.
Best for: Performance-oriented buyers who prioritize restoring steering and wheel control quickly and want a factory-style replacement that minimizes press-fit work during a hub or knuckle repair.
Less Ideal for: Buyers looking for long-term OEM-backed warranty coverage or those who prefer parts with guaranteed exact hardware match should consider alternatives or confirm included fasteners before installation.
- Loaded unit includes knuckle, hub and bearing to simplify installation
- Sold as a direct-fit replacement for specified Hyundai Tucson and Kia Sportage models
- Steel construction for durability under typical driving stresses
- Multiple customer reports of correct fit and secure packaging
- Included axle hardware (washer/nut) may not match OEM thickness and could require using original hardware or adjustments during installation
Verdict A ready-to-install, performance-focused replacement knuckle and hub assembly that speeds repairs and restores steering feel, but double-check the supplied axle hardware for fit.
4. maXpeedingrods Rear Wheel Bearing and Hub Assembly (512553)
| Application | Hyundai Tucson 2016-2021 FWD (rear) |
|---|---|
| Wheel stud count | 5 lug |
| Flange bolt quantity | 4 |
| Position | Rear Left & Right |
This maXpeedingrods rear wheel bearing and hub assembly is a one-piece replacement intended to restore smooth wheel rotation and secure the wheel and brake mounting on Hyundai Tucson 2016–2021 FWD models. It installs in place of the factory hub and is used when a worn bearing or failing hub causes noise, vibration, looseness, or ABS issues. The listing specifies a five-lug flange with ABS provision and a four-bolt flange pattern, so it lines up with the Tucson rear hub arrangement. Practical benefits include a preassembled unit that avoids bearing packing, a deeper back side that can ease installation around axle boots, and quality control claims backed by IATF 16949 and ISO 9001 processes. For a budget-focused repair this hub gives a close-to-factory fit, reportedly smooth spin out of the box, and eliminates common bearing noises. Limitations are that it is an aftermarket part rather than a factory brand and buyers should verify ABS tone ring and exact fitment for hybrid or AWD variants; professional installation or proper torque procedures are recommended to avoid premature wear.
Best for: Budget-conscious owners seeking an affordable, ready-to-install rear hub for routine maintenance or to stop bearing noise on a Hyundai Tucson 2016–2021 FWD.
Less Ideal for: Owners who prioritize an OEM-branded part, those with AWD or hybrid Tucson models, or buyers who need a hub with a documented long-term warranty should consider alternatives.
- Preassembled hub and bearing reduces installation steps compared with separate bearings
- Listed fit specifically includes Hyundai Tucson 2016–2021 FWD rear application
- Includes ABS provision and five-lug wheel studs for direct replacement of Tucson rear hubs
- Manufacturer states production under IATF 16949 and ISO 9001 quality management systems
- Aftermarket unit rather than factory-brand part so minor dimensional differences are possible
- Fitment exclusions such as hybrid or AWD variants are not covered and must be confirmed before purchase
Verdict A cost-effective, preassembled rear hub for Hyundai Tucson 2016–2021 FWD that simplifies replacement and stops bearing-related noise while keeping repair costs low.
5. Detroit Axle AWD 4‑Piece Wheel Bearing Hub Assembly Kit for Hyundai Tucson (2016–2021)
| Position | Front Left or Right; Rear Left and Right |
|---|---|
| Lugs | 5 Bolts |
| Drive Type | AWD |
| ABS on Hub | No |
This Detroit Axle kit supplies two front and two rear wheel hub assemblies intended specifically for AWD Hyundai Tucson model years 2016 through 2021. Installation replaces worn or noisy hubs and restores proper wheel mounting, and the kit is built to match the Tucson’s 5‑lug pattern and AWD drive configuration. Notable details include hub flange types for front and rear positions and the absence of integrated ABS sensors, so it is a straightforward mechanical swap when your vehicle already has separate ABS tone rings or sensors. Buyers will appreciate that the parts arrive as a complete front-and-rear set, which simplifies scheduling a driveway or shop repair and getting the Tucson back on the road quickly. Limitations to note are that these are aftermarket assemblies rather than factory parts and they do not include ABS sensor hardware, so some installs may require transferring or replacing the vehicle’s original sensor components. Proper torque procedures and a post-installation alignment are recommended to ensure long service life and correct steering feel.
Best for: Risk-averse mainstream buyers who want a direct, vehicle-specific replacement to fix wheel bearing noise or looseness on a Hyundai Tucson and prefer a full kit that lets them complete both front and rear repairs in one visit.
Less Ideal for: Drivers seeking exact factory-sourced parts or those who need integrated ABS sensor hubs should consider alternatives or plan to reuse the Tucson’s original sensors.
- Complete four-piece kit covers both front and rear hubs for a single repair job
- Made for AWD Tucson fitment with factory-style 5-lug pattern
- Helps eliminate hub noise and restore solid wheel mounting when bearings fail
- Backed by the brand’s testing and a long component warranty period listed by the maker
- Does not include ABS sensor assemblies so additional parts or sensor transfer may be required
- Aftermarket assemblies instead of factory replacement may show small fit or finish differences
Verdict A practical, vehicle-specific aftermarket hub kit that simplifies replacing worn hubs on AWD Hyundai Tucson (2016–2021) but requires separate ABS sensor handling for some installs.
6. PHILTOP 513374 Front Wheel Hub and Bearing Assembly (pair)
| Brand Name | PHILTOP |
|---|---|
| Bearing Number | 513374 |
| Included Components | 2x Front Wheel Hub and Bearing Assembly – 513374, Installation instructions |
| Material Type | 55# Steel and GCr15 Steel |
| Specification Met | ISO 16949 |
This PHILTOP 513374 front wheel hub assembly is a direct replacement item intended for front hubs on compatible Hyundai Tucson years. It replaces the bearing and hub as a single unit so installers remove the old hub and press the new assembly into place; the listing includes two assemblies and basic installation instructions. The product uses steel hub components and GCr15 bearing steel and is ISO 16949 specified, which suggests factory-style manufacturing processes. For everyday driving the assembly restores wheel alignment and rotational support so steering feel and noise levels return to normal after a worn hub replacement. Buyers benefit from the included pair and a two-year parts guarantee that covers the cost of the item. Limitations are that the unit does not include an ABS tone ring or sensor and professional installation is recommended if you lack the tools to press bearings, so labor costs can add up if you cannot install it yourself.
Best for: A practical optimizer looking for a low-cost, factory-spec replacement to restore a Hyundai Tucson's front wheel performance without paying premium OEM prices.
Less Ideal for: Drivers who require a hub assembly with a new ABS sensor built in or those seeking fully plug-and-play, mechanic-free installs should consider alternatives.
- Sold as a pair which saves a second purchase when replacing both front hubs.
- Constructed from steel and GCr15 bearing steel indicating factory-quality materials.
- ISO 16949 specification suggests controlled manufacturing and consistent fitment.
- Includes installation instructions and a two-year parts guarantee for the item cost.
- Does not include an ABS sensor or tone ring, so ABS components must be reused or purchased separately.
- May require a press and professional installation for correct fit and bearing seating.
Verdict A budget-friendly, factory-quality pair of front hub assemblies that restores wheel support on the Hyundai Tucson but requires separate ABS parts and likely professional installation.
7. Detroit Axle Rear Wheel Hub Bearing Assembly, 2‑pc with ABS (5‑lug)
| Fitment | Rear hubs for specified Hyundai Tucson models |
|---|---|
| Lug Pattern | 5 Lugs |
| ABS Type | Sensor cap |
| Material Type | Alloy Steel |
This Detroit Axle kit supplies two rear wheel hub bearing assemblies intended as direct replacements for applicable Hyundai Tucson rear hubs. Each hub comes with a 5‑lug pattern and an ABS sensor cap so it reconnects to the vehicle's anti‑lock braking system without sensor splicing. The assemblies are packaged as a pair and use alloy steel construction with grease lubrication compatibility, which simplifies installation for a competent DIYer or a shop. Buyers report straightforward bolt‑on fit and quiet operation when properly installed, and the parts undergo impact and fatigue testing per the listing. Limitations to note are mixed long‑term reliability reports and warranty terms that some customers found restrictive in practice, and you may need to pay return or shipping costs if a covered unit fails. For Tucson owners seeking a balanced, lower‑cost replacement that matches factory fitment and restores ABS functionality, this kit is a practical option; those wanting premium OE‑branded hubs or extended local support may prefer alternatives.
Best for: Buyers who want a balanced, practical replacement that restores rear hub fitment and ABS function on a Hyundai Tucson without paying for dealer OEM parts.
Less Ideal for: Drivers seeking dealer‑branded hubs, commercial/flogged vehicles with heavy-duty use, or those who need extensive local warranty handling should consider other options.
- Sold as a matched pair for rear axle replacement so both sides can be serviced at once
- Includes ABS sensor cap to restore factory ABS signal without sensor replacement
- Alloy steel construction and endurance testing aimed at durability under normal driving
- Reported easy, bolt‑on installation that fits factory mounting points
- Some customers report premature failures and limited practical warranty support in certain cases
- Not an OEM‑branded hub which may matter for buyers prioritizing factory nameplate parts
Verdict A cost‑conscious, factory‑fit rear hub pair that restores ABS function on compatible Hyundai Tucson models but carries mixed long‑term reliability reports.
Choosing the Right Hyundai Tucson Wheel Hub Assembly: Key Factors to Consider
Fitment and Compatibility
Correct fitment ensures the hub assembly attaches cleanly to the Hyundai Tucson's hub flange, wheel studs, and braking system. A direct-fit part reduces installation time, avoids hub flange modifications, and prevents misalignment that can cause vibration or uneven tire wear.
Verify bolt pattern, stud size, and whether the assembly is intended for front or rear application. Choosing a hub that matches the vehicle's specific year and axle position reduces the risk of clearance issues with brake components and suspension parts.
Bearing Type and Durability
The bearing inside a hub assembly controls rotational smoothness and load handling. Higher-quality bearings use better materials, precision races, and tighter tolerances to resist wear under daily driving and occasional heavy loads.
Look for sealed, preloaded bearing assemblies where the bearing preload is set at the factory. This minimizes play and reduces the chance of premature failure due to improper adjustment during installation.
Sealing and Contaminant Protection
Effective seals keep water, dirt, and road salt away from the bearing surfaces. Poor sealing allows contaminants to enter, accelerating wear and causing noise or rough operation.
Inspect the assembly design for integrated dust shields or multi-lip seals. Good sealing increases service life and reduces the frequency of replacement, especially in regions with heavy rain or winter road treatment.
Material Quality and Corrosion Resistance
Hubs and flanges are exposed to road debris and moisture, so corrosion-resistant materials or coatings extend service life. Heat-treated steel and protective finishes resist pitting and cracking under stress.
Durable materials also maintain consistent flange flatness and stud integrity, which helps preserve wheel alignment and safe wheel retention over time.
Noise and Vibration Characteristics
A properly functioning hub assembly should run quietly and without perceptible vibration. Bearing wear, contamination, or poor manufacturing tolerances all contribute to grinding, humming, or vibration that you can feel through the steering wheel or floor.
Consider assemblies with quality bearings and balanced construction to minimize noise and harshness. Also factor in how the assembly interfaces with wheel bearings and suspension to reduce transmitted vibration.
Installation and Serviceability
Ease of installation matters whether you install the hub yourself or have a technician do the work. Direct-fit assemblies that arrive preassembled with bearings and seals reduce labor and eliminate the need for specialty tools.
Check whether the manufacturer provides torque specs or installation instructions. If a hub requires bearing press-in or calibration, account for the additional time and equipment needed for a correct install.
FAQ
How can I tell if my Hyundai Tucson needs a new wheel hub assembly?
Common signs include humming or grinding noises that change with vehicle speed, excessive play or looseness in the wheel, or vibration through the steering wheel. Irregular tire wear and ABS warning indicators can also suggest hub or bearing issues. A professional inspection can confirm hub condition and whether replacement is needed.
Is a front wheel hub assembly different from a rear wheel hub assembly on the Tucson?
Yes, front and rear assemblies often differ in bearing size, mounting pattern, and integrated features such as ABS tone rings. Always select the assembly specified for the axle position to ensure correct fitment and braking system compatibility.
Can I replace the bearing only instead of the whole hub assembly?
In some cases bearings can be replaced separately, but many modern assemblies are sold as a sealed unit with the bearing preinstalled. Replacing the full assembly can be quicker and avoids bearing press work. The best approach depends on the hub design and available tools.
What causes wheel hub noise like grinding or humming?
Noise typically stems from bearing wear, contamination from water or debris, or internal corrosion. Damage to the hub flange or imbalance in the wheel assembly can also create vibrations that manifest as humming. Addressing the root cause usually requires inspection and replacing worn components.
Do I need special torque specs when installing a Tucson wheel hub assembly?
Yes, correct torque on mounting bolts and axle nuts is important to maintain bearing preload and safe fastener retention. Manufacturer torque values prevent overloading the bearing or allowing excessive play. Refer to vehicle-specific torque specifications or a repair manual when installing.
How We Chose the Best Hyundai Tucson Wheel Hub Assembly
We focused on parts that match Hyundai Tucson factory fitment and offer robust bearing performance suited to the vehicle's load and driving conditions. Key evaluation criteria included bearing durability under typical city and highway use, correct fitment to the vehicle hub flange and mounting pattern, seal quality to resist contaminants and moisture, and the assembly's preload or integrated bearing design to ensure consistent wheel alignment and play control. We also considered material quality of the hub and flange, heat-treated surfaces where applicable, and manufacturer-specified torque or installation guidance availability. Excluded from consideration were universal or generic hub kits that do not guarantee direct fit for the Tucson, and units lacking clear bearing specifications or sealing details. We prioritized assemblies designed for direct replacement, with clear technical specs that matter for longevity and safe operation.
Our full evaluation process is outlined in our review methodology.
Conclusion
Choose a wheel hub assembly that guarantees proper fitment for your Hyundai Tucson and prioritizes bearing durability and good sealing. Balancing material quality, sealing, and correct axle-specific design reduces noise, improves handling, and extends service life. Keep in mind the tradeoffs between replacement convenience and repair complexity. Preassembled units simplify installation, while separate components may save cost but require additional tools and expertise. Prioritize assemblies that match your Tucson's axle position and provide clear installation guidance.
Explore More:
- Check out all Hyundai Tucson parts & accessories
- Explore Wheels & Tires
- Browse all Auto Parts
