Note: This article contains affiliate links. If you click on these links and make a purchase, I may earn a small commission at no extra cost to you. This helps support my research and content. Read my full affiliate disclaimer here.
Replacing a worn engine mount can noticeably reduce vibration, drivetrain movement, and cabin noise in your Hyundai Tucson. Picking the right mount matters because fitment, material durability, and vibration dampening directly affect ride comfort and component longevity. This guide covers seven shortlisted engine mounts selected for their suitability to the Hyundai Tucson and highlights the key specs and installation considerations you should weigh. Read on to compare each option against the criteria most relevant to everyday driving and maintenance. Below you will find our top picks and the factors that led to their selection.
Looking for other parts? See all Hyundai Tucson parts & accessories.
Top Picks at a Glance
1. OMNI5 Engine and Transmission Mount Kit (4-Piece) for 2005–2009 Hyundai Tucson 2.7L
| Compatibility | 2005-2009 Hyundai Tucson 2.7L |
|---|---|
| Kit contents | 3 Motor Mounts and 1 Transmission Mount |
| Interchange numbers | A7137, A7143, A7140, A7133 |
This OMNI5 kit supplies the three engine mounts and one transmission mount needed to replace worn mounts on a 2005–2009 Hyundai Tucson 2.7L. Designed as a direct-fit replacement, the set maps to common interchange numbers so it is used when vibration, engine movement, or drivetrain clunking indicates failed mounts. Installation is typical of factory-replacement mounts and can be done in a home garage with a lift or jack and basic hand tools. The kit’s benefit is convenience: buying the matched set ensures all primary mounting points are refreshed at once, which restores smoother idle, reduces engine rocking under acceleration, and helps protect other drivetrain components. Limitations are that this is an aftermarket kit so long-term durability can vary by driving conditions, and alignment or hydraulic-style mount performance may differ slightly from factory-original units. Expect standard install steps and occasional need for re-torquing after initial road use.
Best for: Reliability-focused buyers who prefer to replace all worn mounting points in one service visit and prioritize restoring factory-like stability and reduced vibration.
Less Ideal for: Those seeking guaranteed factory-spec hydraulic mount behavior or a vendor-backed durability specification should consider alternatives with documented testing or OEM replacements.
- Complete 4-piece kit replaces all primary engine and transmission mounts at once
- Direct-fit compatibility listed specifically for 2005–2009 Hyundai Tucson 2.7L
- Includes common interchange numbers to simplify part matching during installation
- Buying a matched set reduces residual vibration and engine movement after replacement
- Aftermarket construction may not match factory mount lifespan or damping characteristics
- No detailed material or durability specifications provided in the listing
Verdict A convenient matched 4-piece aftermarket mount kit for restoring engine stability on the 2005–2009 Tucson 2.7L, best for owners who want a full replacement rather than individual parts.
2. A-Premium Engine and Transmission Mount Kit (4‑Piece) for Hyundai Tucson 2005–2009
| Vehicle Fitment | Hyundai Tucson 2005-2009 L4 2.0L |
|---|---|
| Package Included | Front, Front Right, Rear Motor Mount and Transmission Mount |
| Material Type | Alloy Steel, Rubber |
| Manufacturer Warranty | One Year Unlimited Mileage Guarantee |
This four-piece kit replaces the front, front-right, rear engine mounts and the transmission mount on a Hyundai Tucson 2005–2009 2.0L. It is designed for direct replacement during routine engine or drivetrain mount service and ships as a complete set so you can change all major mounts at once. The parts are made from alloy steel with rubber isolators and a powder-coated finish to resist corrosion, and the manufacturer states the components are tested to meet factory-spec performance. In real-world use the kit is convenient for one-stop repairs and can restore engine stability and reduce vibration and drivetrain movement. Several buyers report good material quality and fit, but there are inconsistent reports about hole alignment and occasional broken or incomplete pieces on arrival, so careful inspection before installation is advisable. A one-year unlimited-mileage guarantee covers the cost of the parts. Expect to spend time on trial fitting if any bolt holes are slightly off-center and plan for professional installation if you want guaranteed alignment.
Best for: Convenience-driven buyers who want a single kit to replace all major mounts on a Hyundai Tucson 2005–2009 and prefer a ready-made solution to minimize parts hunting and return trips.
Less Ideal for: Buyers seeking guaranteed factory-perfect fitment without any fitting work or those who prefer OEM branded mounts for warranty-aligned replacements should consider other options.
- Complete four-piece kit covers front, front-right, rear engine mounts and transmission mount for a single repair job
- Alloy steel construction with rubber isolators aims to restore engine stability and reduce vibration
- Powder-coated finish helps resist corrosion for longer service life
- Ships as a matched set so you can replace all major mounts at once without sourcing individual parts
- Some users report misaligned bolt holes that require enlarging or trial fitting
- Occasional reports of damaged or incomplete components on arrival indicate quality control variability
Verdict A convenient, full replacement mount kit for Tucson 2005–2009 that can restore stability quickly but may require fitting adjustments due to variable quality control.
3. OMNI5 Engine & Transmission Mount Kit (3‑Piece) for 2016–2021 Hyundai Tucson 2.0L / 2018–2021 2.4L AWD Automatic
| Brand Name | OMNI5 |
|---|---|
| Compatibility | 2016–2021 Hyundai Tucson 2.0L AWD automatic; 2018–2021 Hyundai Tucson 2.4L AWD automatic |
| Included Parts | Motor mount, torque strut mount, transmission mount (3 pcs) |
| Material Type | Alloy Steel |
This OMNI5 kit supplies three factory-replacement style mounts—a motor mount, a front lower torque strut, and a transmission mount—sold together to restore drivetrain support on compatible Hyundai Tucson AWD automatic models. It's typically used when worn or broken mounts cause excessive engine movement, vibration through the cabin, or clunking under throttle and gear changes. Constructed from alloy steel, the pieces mirror the original mounting locations and interchange numbers so installation follows the same steps as the factory parts and fits the 2016–2021 Tucson 2.0L and 2018–2021 2.4L AWD automatic configurations. The main benefits are a cohesive replacement set that addresses multiple mounting points at once and a five year one-time replacement warranty that gives confidence for performance-oriented drivers who demand firm engine control. Expect a firmer, more direct feel under acceleration and reduced drivetrain lash after installation. This kit may not match premium OEM vibration tuning exactly, and enthusiasts seeking the stiffest aftermarket performance mounts should compare material stiffness and NVH differences before upgrading.
Best for: Performance-oriented Tucson owners who want a high-quality, cohesive replacement set to restore tight engine control and reduce drivetrain movement for more responsive throttle and shifting feel.
Less Ideal for: Drivers seeking race-spec, ultra-stiff mounts for track use or those who prioritize factory-level NVH comfort over firmer performance feel should consider alternative options.
- Three-piece kit replaces motor mount, torque strut, and transmission mount together for consistent drivetrain support
- Alloy steel construction for durable, long-lasting mounting components
- Direct-fit compatibility with specified 2016–2021 Hyundai Tucson 2.0L and 2018–2021 2.4L AWD automatic models
- Five year one-time replacement warranty provides extended coverage
- May not replicate OEM vibration isolation tuning exactly, which can change NVH compared with factory mounts
- Not intended as an ultra-stiff performance mount option for track-focused use
Verdict A durable, three-piece direct-fit mount kit that restores firmer engine control for performance-minded Hyundai Tucson AWD owners while offering extended warranty coverage.
4. A-Premium Engine and Transmission Mount Kit for Hyundai Tucson 2005–2009 (V6 2.7L)
| Vehicle fitment | Hyundai Tucson 2005-2009 V6 2.7L |
|---|---|
| Included pieces | Front motor mount, rear motor mount, transmission mount |
| Transmission | Automatic |
| Manufacturer | A-Premium |
| Manufacturer part number | APEM706 |
This A-Premium kit supplies the front and rear engine mounts plus the transmission mount needed when replacing worn mounts on a Hyundai Tucson V6 2.7L (2005–2009) with an automatic transmission. Intended as a budget-friendly factory-replacement option, the parts are sold together to simplify a standard mount service or do-it-yourself swap. The listing notes testing and quality control to meet factory-spec fitment and the kit includes the three specific positions used on the Tucson, which reduces the need to source individual pieces. Practical benefits include having matching mounts for a complete swap and a one-year unlimited-mileage guarantee for peace of mind. Limitations are typical for value aftermarket kits: you should expect basic materials and finish compared with premium branded mounts, and professional installation may be required to ensure alignment and avoid premature wear. For routine maintenance and restoring engine stability and vibration control on the specified Tucson model this kit covers the common replacement needs without extra parts.
Best for: Budget-conscious Hyundai Tucson owners who prioritize restoring engine stability and eliminating vibration without buying individual mounts or a premium aftermarket brand.
Less Ideal for: Drivers seeking the highest-end, longest-lasting performance mounts or motorsport-grade parts should consider premium or upgraded alternatives instead.
- Complete three-piece kit covers front engine, rear engine, and transmission mounts for the Tucson V6 2.7L
- Sold as a matched set which simplifies replacement and ensures consistent wear characteristics
- Advertised testing and quality control aimed at meeting factory-spec fitment
- Includes a one-year unlimited-mileage guarantee
- Build and finish likely more basic than higher-end or OE-equivalent mounts
- May require professional installation to prevent alignment issues and premature wear
Verdict A no-frills, cost-conscious matched mount kit that restores engine support on the Hyundai Tucson V6 2.7L without the premium price.
5. OMNI5 Engine and Transmission Mount Kit (3-piece) for 2010–2013 Hyundai Tucson / 2011–2013 Kia Sportage
| Brand Name | OMNI5 |
|---|---|
| Manufacturer | Autopartsman Corporation |
| Material Type | Alloy Steel |
| Part Interchange Info | A71048, A71021, A71009 |
This OMNI5 3-piece mount kit replaces the front motor mount, front lower torque strut, and transmission mount on compatible Hyundai Tucson and Kia Sportage models. It is intended as a direct replacement set for vehicles with automatic transmissions and covers the common interchange numbers listed by the manufacturer. In everyday use the kit restores engine stability, reduces vibration felt in the cabin, and helps maintain proper drivetrain alignment after worn mounts are removed. The parts are alloy steel and ship together so you can replace multiple mounting points in one job, which simplifies labor and ensures compatible wear characteristics across the front mounting positions. Important limitations are that fitment is limited to the specified years and engines and that installation may require lifting the engine slightly and basic mechanical tools; professional installation is recommended for owners without experience. The listed five-year one-time-replacement warranty offers added reassurance for conservative buyers.
Best for: Risk-averse mainstream buyers who prefer buying a coordinated, factory-replacement style mount kit to restore ride comfort and drivetrain stability with minimal surprises.
Less Ideal for: Drivers looking for performance or race-oriented mounts, or owners of different model years or engines not listed should look for alternative options.
- Complete 3-piece kit covers front motor mount, torque strut, and transmission mount for a coordinated replacement.
- Alloy steel construction for durability compared with softer aftermarket rubber-only mounts.
- Includes parts that match common interchange numbers for straightforward part identification.
- Ships as a set which can reduce repeat labor by addressing multiple worn mounts at once.
- Fitment is limited to specified model years and engine/transmission combinations and will not work outside those listings.
- May require vehicle lift and engine support for correct installation which can add to labor cost.
Verdict A practical three-piece replacement kit that restores engine stability for the specified Tucson and Sportage years while offering a reassuring warranty for cautious buyers.
6. QRYIPPDM Engine and Transmission Mount Kit for 2010–2013 Hyundai Tucson (2.0L/2.4L)
| Compatible Models | Hyundai Tucson 2010–2013 2.0L/2.4L |
|---|---|
| Included Pieces | Right motor mount, left transmission mount, front lower torque strut mount |
| Manufacturer | QRYIPPDM |
| Part Number | FF024 |
This QRYIPPDM kit supplies a right motor mount, a left transmission mount, and a front lower torque strut designed for 2010–2013 Hyundai Tucson 2.0L and 2.4L engines. It is built from steel and rubber with a painted finish and a hydraulic design where specified, so it aims to reduce vibration and keep the engine and transmission secured under normal driving. Installation is typical for a mount swap: remove the old mounts, align the motor/transmission, and bolt the new mounts in place; many owners report straightforward fit and easy installation. The kit lists multiple reference factory part numbers and claims factory-spec performance, and customer feedback notes good durability and value. Limitations include occasional fitment mismatches in mixed kits and the need to verify each piece against the vehicle before installation, and hydraulic mounts can wear differently than solid-mount alternatives. This is a practical, budget-focused replacement option if you want a full set to restore stability without buying individual OEM parts.
Best for: Practical optimizers who prioritize replacing multiple worn mounts at once to restore ride comfort and drivetrain stability without paying OEM prices.
Less Ideal for: Buyers seeking guaranteed factory-brand parts or those who prefer to replace a single specific mount with an exact factory unit should consider alternative sources.
- Three-piece kit covers right motor, left transmission, and front lower torque strut for a complete replacement job
- Steel and rubber construction with painted finish for corrosion resistance and longer service life
- Hydraulic-style mount design helps reduce engine vibration and driveline noise when driving
- Some buyers reported one part in kit not matching their vehicle configuration requiring separate purchase
- Not a brand-name OEM part so long-term durability can vary compared with factory parts
- Includes multiple reference numbers but buyers should verify fit before installation to avoid returns
Verdict A budget-friendly, complete mount kit that restores engine stability on 2010–2013 Hyundai Tucson models but verify each piece fits before installation.
7. BEBLEPANY Engine and Transmission Mount Kit for 2014–2015 Hyundai Tucson 2.4L (3‑Piece)
| Vehicle compatibility | 2014–2015 Hyundai Tucson 2.4L L4 automatic |
|---|---|
| Included pieces | Right engine mount, front lower torque strut, left automatic transmission mount |
| Material Type | Alloy Steel |
This three-piece BEBLEPANY kit replaces the right engine mount, front lower torque strut, and left automatic transmission mount on 2014–2015 Hyundai Tucson 2.4L automatic vehicles. It is intended as a direct-fit replacement to stop idle vibration, reduce clunking during acceleration, and limit powertrain over-swing that causes rough gear engagement. The mounts pair reinforced steel frames with heat-stabilized rubber to withstand engine bay heat and everyday road impacts, and the seller recommends replacing the set together to avoid uneven wear. In real-world use the kit should noticeably smooth idle vibration and make shifts feel more linear, though installation requires lifting/holding the engine to access mounting bolts and may involve relocating nearby components on some models. These are aftermarket replacements built to match factory bolt patterns rather than a dealer part, so professional installation or solid DIY skills are advisable for proper alignment and torqueing.
Best for: Balanced owners prioritizing a reliable, factory-style repair and smoother daily driving who want a full mount set to restore comfort and drivetrain control.
Less Ideal for: Drivers looking for an exact dealer-sourced part or those who prefer a plug-and-play install without engine support tools should consider alternatives or professional installation.
- Direct-fit kit tuned for 2014–2015 Tucson 2.4L to reduce idle vibration and cabin shake
- Includes engine right mount, front lower torque strut, and left transmission mount for balanced replacement
- Reinforced steel frames with heat-stabilized rubber designed to resist cracking from engine heat and road stress
- Helps reduce clunking and improves shifting smoothness by limiting powertrain movement when worn mounts are replaced
- Aftermarket part so fitment and finish can vary compared with factory parts
- Installation requires supporting the engine and may need removal or relocation of nearby components
- No warranty details listed in product information
Verdict A practical three-piece aftermarket kit that restores engine stability and reduces vibration on 2014–2015 Tucson 2.4L cars when installed correctly.
Choosing the Right Hyundai Tucson Engine Mount: Key Factors to Consider
Fitment and Bolt Pattern
Correct fitment is essential because an engine mount must align precisely with the Tucson’s factory mounting points. Even small differences in bolt hole spacing or bracket shape can cause installation difficulty, stress on mounting hardware, or improper load transfer.
Verify that bolt patterns, stud lengths, and bracket orientations match the specific model year and engine variant. A mount that fits without modification reduces install time and minimizes the risk of misalignment that could accelerate wear or cause noise.
Bushing Material and Damping
The bushing material determines how well the mount absorbs vibrations and isolates the cabin from engine movement. Softer rubber or hydro mounts tend to provide better comfort and absorb low-frequency vibrations, while stiffer compounds offer firmer control but can transmit more vibration.
Consider the primary driving use: daily commuting prioritizes comfort, whereas spirited driving may favor firmer damping. Also assess whether the mount uses fluid chambers or bonded elastomers, as these design choices affect long-term damping performance and responsiveness.
Durability and Environmental Resistance
Engine mounts face heat, oil, road salt, and mechanical load cycles, all of which influence lifespan. Materials that resist oil swelling and thermal degradation will maintain their properties longer and reduce the chance of cracking, delamination, or fast deterioration.
Look for mounts with corrosion-resistant brackets, high-quality rubber compounds, and protective coatings. Longevity reduces the frequency of replacements and the risk of sudden failures that can damage adjacent components.
Load Capacity and Stiffness
Mounts must support engine torque and weight while controlling movement under acceleration, braking, and cornering. Load capacity and stiffness specs indicate how well a mount will maintain engine position and manage rotational forces.
A mount that is too soft can allow excessive engine travel and drivetrain strain. Conversely, one that is excessively stiff can transfer shocks into the chassis. Evaluate manufacturer load ratings and intended use to match the mount to your driving style and the Tucson’s engine characteristics.
Installation Requirements and Hardware
Some mounts include replacement bolts, sleeves, or alignment guides, while others are sold as the bare mount only. Having the correct hardware and clear installation guidance reduces labor time and the potential for incorrect torqueing or misassembly.
Also consider whether the mount requires lifting the engine or special tools. Ease of access to mounting points on the Tucson affects whether the job is a simple DIY or better handled by a technician.
Noise, Vibration, and Harshness (NVH) Performance
NVH performance is a practical measure of how a mount affects cabin comfort and perceived vehicle refinement. Quality mounts are designed to minimize audible noise and transmitted vibration across common operating conditions, including idle, acceleration, and gear changes.
Evaluate design features like dual-stage bushings, fluid-filled chambers, or tuned damping elements that target frequencies known to cause passenger discomfort. NVH tradeoffs often reflect a balance between comfort and control, so consider which outcome matters most for your Tucson.
FAQ
How do I know if a Hyundai Tucson engine mount is failing?
Symptoms often include increased vibration at idle, clunking or banging during acceleration or deceleration, and noticeable engine movement when revving. You may also detect new noises that change with throttle or gear selection. A visual inspection for cracked rubber or fluid leaks can support these observations.
Can I replace an engine mount myself on a Hyundai Tucson?
Many owners can perform a mount replacement with basic tools if the mount is accessible and proper engine support is used. Some mounts require lifting or supporting the engine and torquing bolts to specification, so follow service guidance and safety precautions. Consider professional help if access is tight or special tools are required.
How long do engine mounts usually last in a Tucson?
Typical life varies depending on driving conditions, exposure to oils and heat, and driving style. Mounts often last many years under normal use but can degrade faster with frequent heavy loads or exposure to contaminants. Regular inspections help catch early wear before failure occurs.
Will a stiffer engine mount reduce vibration in the cabin?
A stiffer mount can reduce engine movement and improve perceived chassis control, but it may also transmit more vibration and noise into the cabin. The ideal choice balances stiffness for control with damping for comfort, depending on how you drive your Tucson.
Are there warning signs besides noise that indicate a mount issue?
Yes. Besides noise, look for uneven engine alignment, unusual wear on adjacent components, or loose hardware at mounting points. Increased exhaust movement or driveline vibration under load can also signal a compromised mount. These signs often appear before complete failure.
How We Chose the Best Hyundai Tucson Engine Mount
We prioritized components that match Hyundai Tucson factory fitment and mounting points, focusing on secure attachment and correct bushing geometry. Durability of materials and resistance to oil and heat were key, since mounts are exposed to engine fluids and temperature cycles that drive premature wear. Vibration isolation performance was evaluated by reviewing design features that reduce engine shake and transfer to the chassis, including bushing material and internal damping architecture. Ease of installation and available hardware were considered to reflect typical garage or shop procedures. We also checked reported longevity and user feedback on premature failure modes. We excluded items that lack clear fitment for the Hyundai Tucson or that require major vehicle modification. Products with insufficient technical data or inconsistent mounting specifications were not considered. The resulting list emphasizes reliable, correctly fitting engine mounts that address vibration control and long-term durability.
Our full evaluation process is outlined in our review methodology.
Conclusion
Choosing the right engine mount for a Hyundai Tucson means balancing fitment accuracy, damping characteristics, and durability. Prioritize mounts that explicitly match your Tucson’s mounting points and that use materials or designs suited to the kind of driving you do. Be mindful of installation needs and NVH tradeoffs. A properly selected mount will reduce vibration and drivetrain stress, while the wrong choice can increase noise or accelerate wear. Use the factors above to weigh durability, comfort, and control when making your decision.
Explore More:
- Check out all Hyundai Tucson parts & accessories
- Explore Engine
- Browse all Auto Parts
