Note: This article contains affiliate links. If you click on these links and make a purchase, I may earn a small commission at no extra cost to you. This helps support my research and content. Read my full affiliate disclaimer here.
If you drive a Chrysler Town & Country, a worn wheel hub assembly can cause vibration, noise, or uneven tire wear that affects daily driving and safety. Choosing the right replacement matters because fitment and bearing life directly influence ride quality and long-term reliability. This guide shortlists the top options for Town & Country owners, each selected for proper vehicle fit and robust bearing performance. Below we explain the evaluation criteria used and walk through the key factors to consider before you buy.
Looking for other parts? See all Chrysler Town & Country parts & accessories.
Top Picks at a Glance
1. A-Premium Front Wheel Hub Assembly with ABS (5-Lug)
| Position | Front Left or Right |
|---|---|
| Speed Sensor | Included |
| Wheel Stud Quantity | 5-Lug |
| Pre-Greased | Yes |
This A-Premium front wheel hub assembly replaces the wheel bearing, hub and integrated ABS speed sensor for Chrysler Town & Country and compatible Dodge/Volkswagen vans. It is supplied pre-greased with ball bearings and factory-style wheel studs so installation is straightforward for a mechanic or experienced DIYer when performing a front hub replacement. The unit claims high axial and radial load capacity and includes sealing components and an inserted CV axle spline to restore smooth rolling and stop grease leaks or vibration caused by worn hubs. Benefits include ready-to-install condition, built-in speed sensor, and a full hub assembly that removes the need to press in a separate bearing. Important limitations are mixed user reports about wheel stud durability and the one-year parts-only guarantee does not cover installation labor or consequential costs, so professional installation and inspection of studs is advisable for peace of mind.
Best for: Reliability-focused buyers who prioritize restoring solid, predictable front-end performance on a Chrysler Town & Country and want a ready-to-install hub assembly rather than a multi-step bearing repair.
Less Ideal for: Buyers seeking a long-term factory-backed replacement with extended warranty protection or those who prefer to reuse existing studs without replacing the full hub should consider alternatives.
- Pre-greased, complete hub assembly reduces installation time compared with separate bearing replacement
- Integrated ABS speed sensor included for direct fit with factory wiring and diagnostics
- Designed to restore ride smoothness and eliminate noise and vibration from a worn front hub
- Five factory-spec wheel studs and flange pattern match original fitment for the vehicle
- Some user reports of wheel stud failures suggest variable quality control
- One-year parts guarantee covers only the cost of the item and not installation or other expenses
Verdict A convenient, ready-to-install front hub assembly that restores function and ABS integration for Chrysler Town & Country but inspect studs and plan for professional installation due to limited warranty coverage.
2. AA Ignition Front Wheel Hub Bearing Assembly Set of 2 with ABS Sensor
| Bearing Number | 513273AA |
|---|---|
| Bearing Type | Ball Bearing |
| Material Type | Alloy Steel |
| Compatible Lubricant | Grease |
This AA Ignition front wheel hub bearing assembly set supplies two front hubs with pre-installed ABS speed sensor cable intended to replace worn factory units on compatible Town & Country and Grand Caravan models. It is used to restore smooth wheel rotation, stop noise and vibration, and correct wheel play that causes uneven tire wear. The assemblies arrive ready to install and include the ABS sensor integrated into the hub, which saves time during replacement and reduces the number of separate parts to handle. Buyers will appreciate the advertised direct-fit design that claims to match factory fit and function and the lifetime warranty backing the part. Some customers report occasional ABS sensor issues or the need to transfer small components from old hubs, so careful inspection at install is prudent. These hubs are a cost-focused alternative to factory parts and offer straightforward installation without special tools, but sensor quality and fitment detail can vary so professional installation or a post-install ABS check is recommended.
Best for: Convenience-driven buyers who want a plug-and-play replacement to quickly restore front-end function on a Chrysler Town & Country without sourcing separate sensors or specialty tools.
Less Ideal for: Shoppers who prioritize factory-brand parts or who need guaranteed sensor performance for vehicles under strict diagnostic monitoring should consider OEM replacements or professional-sourced hubs.
- Includes pre-installed ABS speed sensor cable to simplify installation
- Sold as a pair so both front hubs can be replaced together for consistent wear
- Advertised as direct replacement that fits and functions like the factory unit
- Manufacturer offers a lifetime warranty for part replacement
- Some reports of intermittent ABS sensor failures requiring sensor swaps
- Fitment details can require minor adjustments or transferring small parts from the old hub
Verdict A budget-friendly, ready-to-install pair of front hub assemblies with integrated ABS sensors that speed up replacement but may require sensor checks after installation.
3. Detroit Axle Rear Wheel Hub Bearing Assembly (pair) for 2008–2011 Dodge Grand Caravan / Chrysler Town & Country
| Vehicle fitment | 2008–2011 Dodge Grand Caravan, 2008–2011 Chrysler Town & Country |
|---|---|
| Position | Rear left and right |
| Lugs | 5 |
| Flange type | 4-Bolt Square |
| ABS type | Sensor |
This kit supplies two rear wheel hub bearing assemblies intended as direct replacements for the factory rear hubs on 2008–2011 Dodge Grand Caravan and Chrysler Town & Country vans. Each assembly includes the wheel bearing, hub flange with five lug studs, and an ABS sensor type flange so the vehicle speed sensor can read correctly. Installers will use this product when a worn or noisy bearing or a failing ABS tone ring triggers vibration, noise, or fault codes. The parts are tested for impact and fatigue and packaged as a left and right pair, which makes a simultaneous axle repair straightforward. Practical benefits include restoring wheel tracking, eliminating bearing roar, and resolving ABS/speed-sensor error messages without machining or pressing out inner races when the hub is a direct fit. Limitations to consider are that performance and longevity will depend on installation quality and vehicle conditions such as corrosion; a few users report early failures so professional installation and proper torqueing are recommended for best results.
Best for: Performance-oriented shoppers who want a direct factory-replacement rear hub to restore handling and ABS function on a Town & Country and who prioritize getting the job done correctly for driving performance.
Less Ideal for: Buyers seeking a lifetime-guaranteed premium OEM-branded hub or those unwilling to have the parts installed by a shop should consider alternatives or factory parts.
- Sold as a matched left/right pair for same-visit axle repairs
- Includes ABS-compatible flange so wheel speed sensor signals are retained
- Five-lug hub flange matches factory wheel mounting for straightforward fitment
- Claimed impact and fatigue testing suggests attention to durability
- Some customer reports of premature failures on a minority of installs
- 10-year warranty claim has mixed user experiences when filing claims
Verdict A cost-effective matched pair of rear hub assemblies that restore wheel and ABS function on 2008–2011 Town & Country vans, but professional installation is recommended to maximize longevity.
4. Autoround 512493 Rear Wheel Bearing and Hub Assembly with ABS
| Position | Rear |
|---|---|
| Lugs | 5 |
| Includes | ABS sensor and harness |
| Manufacturer Part Number | 512493 |
The Autoround 512493 rear wheel bearing and hub assembly replaces the factory rear hub on Chrysler Town & Country vehicles and includes the ABS sensor and harness for a plug-in fit. It is used as a direct replacement during rear hub service to restore smooth wheel rotation, reduce noise, and maintain ABS function. Notable features include a five-lug design and a preinstalled ABS wheel sensor which simplifies installation and avoids separate sensor transfers. The listing states the unit is quality tested to meet or exceed factory performance and multiple user reports mention good fit and straightforward installation when following standard removal and torque procedures. Limitations to expect are the variable longevity of aftermarket hubs compared with higher-end branded parts and the occasional report of early failure on isolated units, so careful inspection at installation is wise. For the price this assembly offers an economical way to return handling and braking electronics to normal without sourcing multiple components.
Best for: Practical, budget-conscious owners seeking an affordable, ready-to-install replacement to restore rear wheel rotation and ABS function on a Chrysler Town & Country.
Less Ideal for: Owners prioritizing long-term durability from an OEM-branded or premium aftermarket hub or those planning heavy-duty use should consider higher-end alternatives.
- Includes preinstalled ABS wheel sensor and harness for easier plug-in replacement.
- Five-lug hub matches factory wheel mounting pattern for direct fit on listed Town & Country years.
- Marketed and tested to meet or exceed factory performance for basic durability and function.
- Competitively priced option that can lower repair cost compared with dealer parts.
- Aftermarket longevity may vary and some buyers report early failures on isolated units.
- Not a premium OEM-branded assembly so finish and tolerance consistency can differ between batches.
Verdict A budget-friendly, plug-and-play rear hub assembly that restores ABS function and wheel fitment for Chrysler Town & Country owners but may not match premium OEM durability.
5. PAROD Front Wheel Hub & Bearing Assembly (pair) — Compatible with Chrysler Town & Country / Dodge Grand Caravan, 5-lug with ABS
| Bearing Number | 513273 |
|---|---|
| Bearing Type | Hub Bearing |
| Compatible Lubricant | Grease |
| Manufacturer Part Number | 513273-2 |
This PAROD kit supplies two front wheel hub and bearing assemblies intended as direct replacements for 2008–2016 Chrysler Town & Country, 2008–2016 Dodge Grand Caravan, and 2009–2014 VW Routan models that use a 5-lug ABS hub. It installs in place of the factory hub to restore wheel alignment, reduce vibration, and maintain ABS sensor connections thanks to matching electrical connector locations. The parts are advertised as meeting OEM-quality standards, arrive preassembled and greased, and eliminate the need to press bearings in separately which speeds up a brake or hub service. Buyers report straightforward fitment and quiet operation after installation, though there are mixed reports about longevity on heavily used vehicles. If you plan to do the swap yourself, cleaning the mating surfaces and torquing to factory spec are important steps. The unit is practical for routine replacement but results will depend on correct installation and regular inspection on high-mileage vans.
Best for: Buyers who prioritize risk-averse, practical repairs and want a direct, factory-style replacement to restore steering smoothness and ABS function on their Town & Country without custom modifications.
Less Ideal for: Users seeking a premium performance or long-life upgrade for heavy towing or high-mileage commercial use should consider heavy-duty or OEM-branded alternatives.
- Sold as a matched pair so both front hubs are replaced at once for consistent wear
- Preassembled, greased hub assemblies speed up installation and remove need for bearing presses
- Designed with ABS connector points that align with factory wiring for plug-and-play replacement
- Advertised to meet OEM-quality standards and 100% tested before shipping
- Some user reports indicate premature failure under heavy use, so long-term durability may vary
- No vehicle-specific installation hardware or instructions included in the listing
Verdict A convenient, ready-to-install pair of front hub assemblies for Chrysler Town & Country owners seeking a practical, factory-style replacement, with the usual caveat that long-term durability can vary.
6. Aspligo Rear Wheel Hub Bearing Assembly (512493) — 2‑Pack with ABS
| Compatible Models | Chrysler Town & Country 2012–2016; Dodge Grand Caravan 2012–2020; Ram C/V 2012–2015; Volkswagen Routan 2012–2013 |
|---|---|
| ABS Sensor | Yes |
| Bearing Type | Ball Bearing |
| Included Components | Hub Bearing |
| Specification Met | Oem |
These Aspligo rear wheel hub assemblies are sold as a two-piece set intended to replace worn factory units on compatible Chrysler Town & Country and related vehicles. Each hub comes preassembled with the bearing and magnetic ABS tone ring, so installation removes the need to press a separate bearing into the hub and does not require bearing clearance adjustment. The manufacturer highlights improved sealing, compact construction, and higher load capacity to reduce play and road noise, which translates to quieter driving and longer service life when installed correctly. Practical owners will appreciate the plug‑and‑play fitment and the included ABS sensor ring that keeps the system working without extra parts. Expect easy swap jobs when you have standard hub tools, but be cautious: aftermarket quality varies across batches and a minority of users report early failures, so workmanship consistency and longevity may not match premium brand replacements. Proper installation without disassembling the sealed unit is important to avoid damage.
Best for: Practical optimizers seeking a cost-effective, ready-to-install hub assembly to restore ride quality and ABS function without paying for premium brand parts.
Less Ideal for: Buyers who prioritize maximum long-term durability or demand parts from a specific well-known premium supplier should consider higher-end alternatives or dealer-sourced options.
- Preassembled hub and bearing for straightforward replacement and no bearing preload adjustment
- Integrated ABS tone ring maintains wheel speed sensor function without separate parts
- Sealed construction and claimed higher load capacity aimed at reduced noise and longer life
- Sold as a 2-piece set so you can service both rear hubs at once
- Some buyers report premature bearing failure, indicating variable quality control
- Not from an established OEM brand so long-term durability may be uncertain
Verdict Good value for a ready-to-install rear hub assembly for Town & Country owners who want an affordable, straightforward replacement, but expect variable long-term durability.
7. Detroit Axle Front and Rear Wheel Bearing Hub Assembly Kit for 2012–2016 Chrysler Town & Country / 2012–2020 Dodge Grand Caravan
| Position | Front and Rear |
|---|---|
| Lugs | 5 Bolt |
| ABS Type | Sensor Wire |
| Flange Type | 4-Bolt Square |
This Detroit Axle kit supplies four hub assemblies (front and rear) to replace worn wheel bearing hubs on 2012–2016 Chrysler Town & Country and the related Dodge Grand Caravan. Each hub comes with a 5-bolt spline pattern and ABS sensor wire provision so it installs like a factory replacement and restores wheel support and ABS function. In practice the kit is useful for owners doing a full hub refresh at once to eliminate noise, play, or ABS faults rather than swapping individual corners. Buyers report straightforward bolt-up fitment and quiet operation after install, and the parts undergo fatigue and wear testing per the brand. Limitations to consider are mixed long-term reliability reports across aftermarket parts and one noted missing keeper ring in some orders which may require a dealer-sourced component; expect to verify all small hardware before installation. This kit is best for owners who want a complete, balanced replacement that mirrors factory fit and function but should be installed or inspected by a competent technician to catch any missing pieces before reassembly.
Best for: Balanced all-round buyers who want a full, factory-style hub replacement for routine maintenance or to correct noise and play without mixing part sources.
Less Ideal for: Buyers seeking guaranteed OEM longevity with minimal risk should consider dealer-sourced factory replacements or professional remanufactured units instead.
- Complete four-piece kit replaces front and rear hubs for a full-service repair
- Built with ABS sensor wire provision for retained ABS functionality
- 5-bolt flange pattern matches factory mounting for straightforward installation
- Tested for impact, wear, and fatigue to help durability claims
- Some customers reported missing small hardware such as a keeper ring in select orders
- Aftermarket longevity varies across reports so failures have been reported by some users
Verdict A convenient full front-and-rear hub replacement that restores fit and ABS functionality for Town & Country/Grand Caravan models, though aftermarket durability can vary.
Choosing the Right Chrysler Town & Country Wheel Hub Assembly: Key Factors to Consider
Vehicle-Specific Fitment
Ensuring the assembly is specified for the Chrysler Town & Country is the first priority. Correct fitment affects bolt pattern alignment, wheel hub offset, and ABS tone ring location, all of which influence how the wheel mounts and how braking and stability systems perform.
An incorrectly fitted hub can cause steering vibration, accelerated tire wear, or mismatched ABS readings. Confirming model year, axle position, and any factory options helps avoid returns and additional labor.
Bearing Type and Sealing
The bearing design and quality determine long-term smoothness and load capacity. Sealed, preassembled units reduce contamination risk and are simpler to install, while open or serviceable bearings may require more maintenance.
Effective seals prevent water and road grit from entering the bearing race, which is a common cause of premature failure. Look for assemblies with robust seals and corrosion-resistant finishes to extend service life in wet or salted environments.
ABS Tone Ring and Sensor Compatibility
Many Town & Country models use ABS sensors that rely on a tone ring integrated into the hub assembly. Compatibility with the vehicle's ABS tone and sensor geometry is essential to avoid fault codes or degraded braking performance.
If the hub lacks the tone ring or misaligns the sensor, the system may register errors or alter anti-lock behavior. Verify whether your vehicle requires a tone ring and choose an assembly accordingly.
Load Capacity and Durability
Hubs and bearings must handle the vehicle's curb weight, cargo, and towing loads without excessive deflection. Materials, heat treatment, and bearing preload all affect how the assembly performs under sustained load and during cornering.
Stronger components and proper manufacturing tolerances reduce the risk of premature wear, heat buildup, or bearing seizure. Consider assemblies rated for similar load conditions to the factory specification to maintain handling and safety.
Included Hardware and Ease of Installation
Some assemblies come with mounting studs, nuts, or wheel studs preinstalled, which can save time and reduce the need to transfer parts from the old hub. Complete kits simplify the job and minimize missing-piece delays.
Ease of installation matters if you are doing the repair at home or in a budget-conscious shop. Look for units that match factory torque patterns and do not require specialty tools beyond common automotive equipment.
Corrosion Resistance and Finish
Hubs operate in corrosive road environments, so protective coatings and plated fasteners matter for longevity. Corrosion can seize mounting hardware, distort seals, and shorten bearing life.
Choose assemblies with durable finishes and corrosion-resistant materials to reduce the risk of stuck bolts and to maintain reliable sealing over time. This is particularly important in regions with road salt or frequent wet conditions.
FAQ
What are common symptoms that a wheel hub assembly is failing on a Town & Country?
Common signs include a grinding or humming noise that changes with vehicle speed, wheel vibration during driving, and uneven tire wear. You may also notice ABS warning lights if the tone ring or sensor is affected. Symptoms often develop gradually and can worsen with load or speed.
Can I replace a Town & Country wheel hub assembly myself?
Many mechanically inclined owners can replace a hub assembly with basic tools, a jack, and common sockets. The job typically involves removing the wheel and brake components, unbolting the old hub, and installing the new unit to factory torque values. If you are unsure about axle nut torque or ABS sensor alignment, consult a professional.
How long should a wheel hub assembly last?
Service life varies based on driving conditions, seal integrity, and load, but many assemblies last tens of thousands of miles under normal use. Exposure to water, road salt, or heavy towing can shorten lifespan, while robust seals and quality bearings tend to extend it.
Will a noisy hub always show a wheel bearing code?
Not always. Some failing bearings produce noise before triggering diagnostic codes, especially if the ABS tone ring remains intact. Conversely, ABS faults can occur from tone ring damage even if the bearing noise is minimal. Use both symptom assessment and diagnostic scans to pinpoint the issue.
Do front and rear hub assemblies differ for the Town & Country?
Yes. Front and rear hub assemblies often differ in bolt pattern, bearing size, and whether an ABS tone ring is integrated. Confirm the axle position when ordering to ensure correct fitment and to match the vehicle's mounting geometry.
Are replacement hubs pre-greased and sealed?
Many modern replacement hub assemblies come preassembled with bearings that are lubricated and sealed at the factory. This reduces installation steps and contamination risk. Check the product details to confirm whether the unit is pre-greased and includes the necessary seals.
How We Chose the Best Chrysler Town & Country Wheel Hub Assembly
We focused on parts that specifically fit the Chrysler Town & Country and prioritized components designed to restore factory fit and function. Our evaluation emphasized correct fitment to factory mounting points, the quality and sealing of the bearing assembly, integration of ABS tone rings where applicable, and the durability of internal bearings and races. We also considered the included hardware and whether the assemblies reduced installation complexity for common home or shop repairs. Excluded items included universal bearings, generic kits that require extensive machining, and assemblies lacking documented fitment for the Town & Country. Our selection favored assemblies with clear vehicle compatibility, solid bearing seals to resist contaminants, and designs that match OE mounting and load specifications to ensure safe, predictable performance.
Our full evaluation process is outlined in our review methodology.
Conclusion
When replacing a Chrysler Town & Country wheel hub assembly, prioritize correct fitment, bearing quality, and ABS compatibility. These factors most directly affect safety, ride quality, and how long the repair will last. Balance the ease of installation, included hardware, and corrosion protection against your driving conditions. Focusing on assemblies that match factory mounting and sealing standards will reduce rework and deliver the most reliable outcome.
Explore More:
- Check out all Chrysler Town & Country parts & accessories
- Explore Wheels & Tires
- Browse all Auto Parts
