Note: This article contains affiliate links. If you click on these links and make a purchase, I may earn a small commission at no extra cost to you. This helps support my research and content. Read my full affiliate disclaimer here.
If your Buick Regal is showing vibration, uneven tire wear, or unusual noise from a wheel area, the wheel hub assembly is often the component to inspect. Choosing the right hub assembly matters because it directly affects wheel alignment, bearing longevity, and vehicle safety during cornering and highway driving. This guide highlights the top shortlisted wheel hub assemblies for the Buick Regal, focusing on reliability and correct fitment. We evaluated each option for build quality, bearing performance, and ease of installation. Read on to understand what to look for before you replace a hub assembly.
Looking for other parts? See all Buick Regal parts & accessories.
Top Picks at a Glance
| Best Reviewed A top-rated pick with lots of positive feedback | Autoround 513288 Wheel Hub Assembly with ABS (5-Lug) |  |
| Most Popular A crowd favorite that many people choose with confidence | TRQ Wheel Bearing & Hub Assembly Set, 2-Piece |  |
| Best Quality Built to a higher standard if you want something more solid | Detroit Axle Rear Wheel Bearing Hub Assemblies (pair) |  |
| Best Budget The cheapest option that still gets the job done reliably | JLEO 513288 Wheel Hub Bearing and Assembly |  |
| Most Sold A high-volume bestseller chosen again and again | KNOLET Front Wheel Hub Bearing Assembly (513121) with ABS, 5-Lug |  |
| Best Value for Money The sweet spot between price and what you get | QJZ 513288 Wheel Hub Bearing Assembly (2-Pack) |  |
| Best Overall The best all-around choice for most situations | KNOLET Pair Wheel Hub Bearing Assembly, Front (513288) |  |
1. Autoround 513288 Wheel Hub Assembly with ABS (5-Lug)
| Bearing Number | 513288 |
|---|---|
| Bearing Type | Ball Bearing |
| Material Type | Alloy Steel |
| Compatible Lubricant | Grease |
This Autoround 513288 wheel hub assembly is a ready-to-install replacement hub with an integrated ball bearing and ABS connection that restores wheel support and sensor function. It is intended for bolt-in installation where a 5-lug hub with ABS is required and is typically used to eliminate wheel noise, play, or ABS fault codes caused by a failing hub. Notable features listed include factory-style fitment, a flange sized to match the original, and Autoround quality testing to meet or exceed factory performance standards. Practical benefits are straightforward installation for a mechanic, restored steering stability and ABS operation, and compatibility with Buick Regal applications covered by the part reference. Limitations are that long-term durability depends on driving conditions and corrosion exposure, and buyers should confirm exact fitment for their specific Regal year and trim before installing. The part comes with manufacturer after-sales support but does not include extended service details in the listing.
Best for: A reliability-focused buyer who prioritizes restoring factory-level handling and ABS operation on a Buick Regal and prefers a tested replacement over temporary repairs.
Less Ideal for: Drivers seeking lifetime performance warranties or heavy-duty upgrades for frequent off-road or high-corrosion use should consider purpose-built heavy-duty hubs or dealer options instead.
- Integrated bearing and ABS sensor restores wheel support and resolves ABS fault codes
- 5-lug bolt pattern for direct-fit replacement where applicable
- Manufacturer states quality testing to meet or exceed factory performance standards
- Designed for quick, mechanic-friendly installation
- Longevity can vary with salt exposure and harsh environments
- Listing does not provide detailed lifespan or load-rated test data
Verdict A practical, tested direct-replacement hub assembly that restores fit, bearing function, and ABS operation for Buick Regal owners focused on reliability.
2. TRQ Wheel Bearing & Hub Assembly Set, 2-Piece
| Included Components | 2 Piece Wheel Bearing & Hub Assembly Set |
|---|---|
| Bearing Type | Ball Bearing |
| Fitment (selected Buick) | Envision 2017-18 rear, LaCrosse 2017-19 rear, Regal Sportback 2018-20 rear |
| Compatible Lubricant | Grease |
This TRQ kit supplies a driver and passenger side wheel bearing and hub assembly intended as direct replacements for specified Buick fitments. Designed for rear installation on Buick Envision (2017–18 FWD), LaCrosse (2017–19 FWD), and Regal Sportback (2018–20 FWD), the assemblies come pre-assembled to speed installation and reduce workshop time. Notable elements include ball-type bearings, grease-compatible seals, and manufacturer resources such as step-by-step videos to help DIYers and professional installers get the job done correctly. In practice the parts aim to quiet rumbling, reduce vibration, and restore wheel stability when worn hubs cause noise or handling issues. Buyers should expect generally solid fit and fitment confirmation tools to check compatibility for Buick Regal models. However, aftermarket quality can vary between batches so careful inspection at receipt and correct torqueing of fasteners during installation are important to avoid ABS or wheel-mounting issues reported by some users.
Best for: Convenience-driven buyers who prioritize a direct-fit replacement that speeds a rear hub bearing swap and prefer clear installation guidance and resources.
Less Ideal for: Owners seeking an OEM-sourced part or a guaranteed factory-spec match for long-term warranty coverage should consider dealer-sourced parts instead.
- Sold as a two-piece set with left and right assemblies for full rear replacement
- Pre-assembled hubs simplify installation and reduce need for press work
- Ball-bearing design with grease-compatible seals aimed at reducing noise and vibration
- Manufacturer offers installation videos and broad aftermarket support
- Some purchasers reported fitment or missing hardware issues and intermittent ABS faults on installation
- Aftermarket consistency can vary so inspection before installation is advisable
Verdict A convenient, pre-assembled two-piece hub and bearing set that makes rear replacements faster for compatible Buick models but requires careful inspection and correct installation to avoid fitment issues.
3. Detroit Axle Rear Wheel Bearing Hub Assemblies (pair)
| Position | Rear Left and Right |
|---|---|
| Lugs | 5 |
| ABS Sensor Included | No |
| Material Type | Ceramic |
These Detroit Axle rear wheel bearing hub assemblies are a direct-replacement pair for the rear left and right positions on compatible Buick Regal Sportback and related GM models. They arrive as complete hub-and-bearing units with five lug studs and a triangular flange, intended to replace worn rear hubs without disassembling the bearing from the hub. In practice they are used during rear-end service to restore smooth rotation, eliminate bearing noise, and repair play that affects handling. Notable points include impact and fatigue testing claimed by the brand, ceramic material listing for the bearings, and inclusion of both left and right hubs in a single kit. Practical benefits are straightforward fitment for the correct vehicle, the convenience of a matched pair, and reduced road noise and vibration when installed correctly. Limitations: these kits do not include ABS sensors, so you must reuse the factory sensor where required, and some buyers reported occasional packaging or component damage in transit that required replacement. Installation can require specialty tools and attention to retaining rings on some vehicles.
Best for: Performance-oriented owners who prioritize restoring precise rear-wheel behavior and reducing noise on a Buick Regal Sportback and want a higher-quality aftermarket hub replacement.
Less Ideal for: Drivers who need new ABS sensors included or who prefer plug-and-play kits with every electrical component provided should consider alternatives or source sensors separately.
- Sold as a matched pair for rear left and right replacement
- Five-lug hub with factory-style flange for bolt-on fitment
- Designed to address bearing wear and reduce road noise and vibration
- Manufacturer states products undergo impact and fatigue testing
- Does not include ABS speed sensors so the OEM sensor must be transferred when needed
- Some buyers reported packaging damage on arrival requiring vendor replacement
Verdict A matched pair of rear hub assemblies that restore rear-wheel performance and quietness for compatible Buick Regal Sportback models, provided you reuse the ABS sensor separately.
4. JLEO 513288 Wheel Hub Bearing and Assembly
| Bearing Number | 513288 |
|---|---|
| Bearing Type | Ball Bearing |
| Compatible Lubricant | Grease |
| Specification Met | ISO 9001 |
This JLEO 513288 wheel hub assembly replaces the wheel bearing and hub in compatible GM vehicles and installs in place of the factory unit. It is sold as a complete hub with integrated bearing and an ABS encoder ring for vehicles that use an electronic speed sensor. Typical use is direct replacement during a wheel-bearing failure or when noise or ABS/Stability Control warnings indicate a bad hub. Buyers report the part fits cleanly, restores smooth, quiet rolling, and clears ABS faults when the original magnetic ring is damaged. The unit is described as ISO 9001 measured and grease-compatible for lubrication needs. Installation requires basic to intermediate mechanical skill and common tools; some reviewers recommend having a shop handle it. As a budget-focused option this part delivers OEM-style fit and good value for routine repairs, but quality control appears variable across units so longevity can differ and occasional early failures have been reported.
Best for: Practical, budget-conscious owners seeking an affordable factory-replacement wheel hub for a Buick Regal who prioritize immediate fit and lower upfront repair cost over premium brand assurance.
Less Ideal for: Drivers planning long-term, high-mileage use without frequent inspections or those who prefer premium aftermarket or dealer-supplied hubs with extended testing and warranties.
- Direct-fit replacement for compatible GM models including Buick Regal, simplifying repairs
- Includes ABS encoder ring so vehicle speed/ABS systems work after installation
- Complete hub and bearing assembly reduces labour vs. pressing in a separate bearing
- ISO 9001 specification and grease-compatible design for standard maintenance
- Many users report easy installation and resolved wheel noise or ABS lights
- Some buyers reported premature failures indicating inconsistent quality control
- Not a timed or lifetime-tested premium brand so long-term durability may vary
Verdict A cost-conscious direct-fit hub assembly that restores function and clears ABS issues for Buick Regal owners, but expect variable longevity compared with premium replacements.
5. KNOLET Front Wheel Hub Bearing Assembly (513121) with ABS, 5-Lug
| Material | Carbon Steel |
|---|---|
| Bearing Number | 12429204 |
| Bearing Type | Ball Bearing |
| Compatible Lubricant | Grease |
| Wheel Stud Quantity | 5 lugs |
This KNOLET front wheel hub bearing assembly replaces worn front hubs and restores wheel rotation and ABS signal integrity on compatible Buick Regal models. It installs in place of the factory unit and includes the ABS sensor provision and five wheel studs to match stock mounting. The assembly is built from forged carbon steel with integrated seals and a protective coating intended to resist corrosion and retain grease, which helps reduce noise and vibration compared with a worn hub. It is supplied as a complete hub bearing so you avoid pressing bearings separately, which saves shop time during a typical front-hub replacement. Limitations to note are that compatibility must be confirmed for your Regal year and exact submodel before ordering and that aftermarket fit and longevity can vary versus a factory part, so professional installation and proper torqueing are recommended. This unit is targeted at restoring function and road feel rather than achieving performance upgrades.
Best for: Risk-averse mainstream buyers who prioritize restoring reliable, factory-like braking and ABS function on their Buick Regal and prefer a ready-to-install hub that minimizes workshop time.
Less Ideal for: Buyers seeking performance upgrades or higher-end OEM-specified longevity should consider premium or dealer-sourced alternatives instead of this aftermarket unit.
- Direct-replacement hub assembly that includes bearing and ABS sensor provision for straightforward swap-in installation
- Forged carbon steel construction and protective coating aimed at improved corrosion resistance
- Integrated seals and pre-greased bearing to reduce noise and vibration after install
- Requires confirming exact year and fitment for Buick Regal before purchase to avoid mismatch
- Aftermarket longevity may differ from factory-quality parts so lifespan can vary
Verdict A ready-to-install front hub assembly that restores factory-style function and ABS compatibility for Buick Regal owners who want a practical, replacement-focused solution.
6. QJZ 513288 Wheel Hub Bearing Assembly (2-Pack)
| Bearing Number | 513288 |
|---|---|
| Material | Alloy Steel |
| Bearing Type | Ball Bearing |
| Anti-Lock Brake System | ABS Magnetic Encoder |
| Position | Front, Rear |
The QJZ 513288 two-pack supplies wheel hub bearing assemblies intended to replace failed hubs on compatible Buick Regals and LaCrosse models. These complete hub assemblies include the bearing, integrated ABS magnetic encoder, and wheel studs so they install as a direct replacement and restore wheel rotation and ABS signal transmission. In use they remove hub noise and ABS faults that appear when a worn hub or flaking encoder magnet fails. Buyers report straightforward installation when using proper tools and following axle nut torque specs. The assemblies are advertised as low-noise, low-friction, and durable thanks to alloy steel construction and factory-style design. Limitations to consider are that this is an aftermarket part rather than a factory-branded unit and longevity will depend on correct installation and torqueing of the axle nut; wheel bearing failures from overtightening are a common issue. Also the listing covers multiple vehicle fitments, so confirm exact year/submodel fit before ordering for a specific Regal application.
Best for: Practical optimizers who want a cost-effective, ready-to-install hub assembly to repair a Buick Regal and restore quiet operation and ABS function without paying dealership rates.
Less Ideal for: Buyers seeking an exact factory-branded hub for warranty parity or those who prefer professional-install-only solutions without doing fitment verification first.
- Sold as a two-pack for replacing both sides at once, reducing downtime
- Includes integrated ABS magnetic encoder so ABS and traction signals are maintained
- Direct-fit factory-replacement design with wheel studs for straightforward swap
- Alloy steel construction intended for durability and reduced noise during operation
- Aftermarket part so finish and long-term durability may vary compared with factory-brand units
- Proper installation and correct axle nut torque are required to avoid premature failure
Verdict A budget-friendly, two-pack hub assembly that restores ABS function and quiets worn hubs on compatible Buick Regals if installed with correct torque and care.
7. KNOLET Pair Wheel Hub Bearing Assembly, Front (513288)
| Bearing Type | Roller Bearing |
|---|---|
| Material Type | Carbon Steel |
| Included Components | Wheel hub bearing |
| Position | Front Left and Right Axle |
This KNOLET wheel hub bearing assembly is a direct-replacement style hub intended for front axle service on compatible Buick Regal models. It installs in place of the factory hub and restores smooth wheel rotation, steering responsiveness, and ABS sensor function when the original unit has worn or failed. The parts are forged carbon steel with sealed bearings and a protective coating to resist moisture and corrosion, which helps reduce noise and vibration in everyday driving. Buyers will appreciate that the assemblies include the hub bearings and match factory mounting points and wheel stud pattern, making them straightforward for a professional or experienced DIY installer to fit. Important limitations are that these are replacement hubs rather than an upgraded performance unit and one reported issue involved an ABS sensor failure on a small number of units, though seller support has resolved some cases. Expect typical installation effort for hub replacement on a Regal, including possible difficulty removing a corroded original hub on older cars.
Best for: Balanced all-round buyers who want an affordable, factory-quality replacement to restore normal driving comfort and ABS function on a Buick Regal without chasing premium performance upgrades.
Less Ideal for: Drivers seeking heavy-duty or performance hub assemblies for track use or towing should consider aftermarket performance options instead.
- Factory-style fitment that aligns with Buick Regal front hub mounting and wheel stud pattern
- Sealed bearing design and protective coating to limit moisture ingress and reduce corrosion
- Forged carbon steel construction aimed at restoring stable braking and handling
- Includes both left and right front hub assemblies for a complete axle repair
- Not an upgraded performance or heavy-duty hub—built as a factory-equivalent replacement
- Some customers reported isolated ABS sensor failures requiring replacement
Verdict A practical, factory-style pair of front hub assemblies that restore quiet, stable operation on a Buick Regal without adding performance upgrades.
Choosing the Right Buick Regal Wheel Hub Assembly: Key Factors to Consider
Fitment and Vehicle-Specific Compatibility
Correct fitment is the foundational consideration because even high-quality components can cause failure if they do not match the vehicle's mounting points, stud pattern, or ABS sensor interface. Verify the assembly matches the Buick Regal's hub flange diameter, bolt pattern, and bearing type to avoid alignment issues or premature wear.
Fitment also affects installation time and may determine whether additional parts such as hub nuts or retaining clips are required. Choosing a hub assembly with explicit compatibility for the Buick Regal reduces the risk of returns and ensures the ABS and wheel speed sensor functions are preserved.
Bearing Type and Sealing
The bearing design determines durability and maintenance needs. Sealed, preassembled bearings reduce contamination risk and simplify replacement because the unit arrives ready to install without packing grease. Open or serviceable bearings may require additional steps and carry higher risk if seals are damaged during installation.
High-quality seals and shields help keep out water and grit, which are common causes of bearing failure. Look for assemblies with effective sealing materials and robust grease retention to extend service life in wet or salty conditions.
Material Quality and Corrosion Resistance
Hubs are exposed to road debris, moisture, and salt, so materials and coatings matter for long-term reliability. Corrosion-resistant housings and plated or treated wheel studs resist rust that can seize components and complicate future servicing.
Better metallurgy and surface treatments can also maintain precise mounting surfaces and bolt torque over time. Choosing assemblies with proven anti-corrosion finishes reduces the chance of noise or fitment issues caused by surface degradation.
Bearing Load Capacity and Performance
Wheel hub bearings must support vehicle weight, cornering loads, and braking forces without excessive deflection. Bearings designed for the expected load and speed range of the Buick Regal will run cooler and last longer. Pay attention to bearing specifications such as dynamic load rating and intended application.
Undersized bearings or lower-quality internal geometry can cause heat buildup, increased friction, and premature failure. A properly specified bearing contributes directly to steady steering feel and stable wheel alignment.
ABS Tone Ring and Sensor Compatibility
Many modern Buick Regal models rely on ABS or traction control systems that use a tone ring integrated into the hub or bearing. An assembly that preserves the original tone ring design and sensor gap ensures reliable wheel speed signals and avoids diagnostic faults.
If the replacement hub lacks the correct tone ring or positions it differently, you may see intermittent ABS warnings or degraded braking stability. Verify the hub assembly supports the vehicle's ABS arrangement and sensor mounting.
Ease of Installation and Serviceability
Ease of installation affects labor time and the potential for installation errors. Preassembled units with new studs and a sealed bearing minimize steps and reduce the need for specialized tools. Clear torque specifications and standard mounting features help achieve correct preload and prevent wobble.
Serviceable designs that allow replacing only the bearing can be economical long term, but they require more mechanical skill. Consider whether you will do the work yourself or use a shop, and choose an assembly that matches your skill level and available tools.
FAQ
How do I know if the wheel hub assembly on my Buick Regal needs replacing?
Common signs include a humming or grinding noise from the wheel area, increased vibration through the steering wheel, or uneven tire wear. You may also notice ABS warning lights if a tone ring or sensor is affected. Typically these symptoms worsen with speed or while cornering.
Can I replace a wheel hub assembly myself on a Buick Regal?
Many hub replacements are within the capabilities of a competent DIYer with the right tools, including a torque wrench, socket set, and possibly a press for bearings. Follow factory torque specs and safety procedures. If you lack tools or experience with wheel bearings and suspension, professional installation is recommended.
Should I replace front and rear hub assemblies at the same time?
It depends on condition and mileage. If one hub fails due to wear or contamination, inspecting the others is wise. Replacing both sides on the same axle is common to ensure consistent performance and avoid repeat labor. Rear and front hubs can wear differently, so prioritize areas showing symptoms.
What role does the ABS tone ring play in hub replacement?
The ABS tone ring provides wheel speed information to the braking system. A damaged or missing tone ring can trigger ABS warnings and affect braking stability. When replacing a hub assembly, verify the tone ring and sensor alignment are correct to maintain proper ABS function.
How long do wheel hub assemblies usually last on a Buick Regal?
Lifespan varies with driving conditions and maintenance, but many hub assemblies last tens of thousands of miles under normal driving. Exposure to water, road salt, or heavy loads can shorten service life. Regular inspections for play and noise help catch issues before failure.
How We Chose the Best Buick Regal Wheel Hub Assembly
We shortlisted hub assemblies that meet common Buick Regal fitment and safety expectations and that offer robust bearing design. Our selection process prioritized units with sealed bearings, corrosion-resistant housings, and service-friendly mounting interfaces. We evaluated materials and manufacturing tolerances, focusing on bearing preload and runout control because these directly affect vibration and tire wear. Durability under load and typical driving conditions was assessed through reported longevity and construction features such as shields and seals. Ease of installation and compatibility with factory ABS tone rings and wheel studs were important because improper fit causes alignment and braking issues. We excluded units with unclear fitment documentation, unsealed bearings, or nonstandard stud patterns. The final list reflects products that balance long-term reliability, correct fitment, and reasonable installation effort for Buick Regal owners.
Our full evaluation process is outlined in our review methodology.
Conclusion
When choosing a wheel hub assembly for a Buick Regal, prioritize correct fitment, sealed bearing design, and corrosion-resistant construction. Those factors most directly affect noise, vibration, and the service life of the unit. Balance ease of installation with long-term durability: preassembled, sealed units reduce installation steps and contamination risk, while serviceable options may offer cost savings if you plan future repairs. Ultimately, focus on verified compatibility with your Buick Regal, proper ABS tone ring support, and bearing specifications that match normal driving loads. That approach will help you restore smooth steering and reliable wheel performance without unnecessary rework.
Explore More:
- Check out all Buick Regal parts & accessories
- Explore Wheels & Tires
- Browse all Auto Parts
