Note: This article contains affiliate links. If you click on these links and make a purchase, I may earn a small commission at no extra cost to you. This helps support my research and content. Read my full affiliate disclaimer here.
If your Buick Regal is running rough, triggering a check engine light, or showing reduced fuel economy, a faulty oxygen sensor is a common cause. Choosing the right Buick Regal oxygen sensor matters because fitment, sensor response, and durability all affect engine performance, emissions, and fuel use. This guide highlights the top shortlisted oxygen sensors for the Buick Regal and explains the evaluation criteria we used, including compatibility, sensor response time, and build quality. Read on to compare the main factors that influence long-term reliability and drivability.
Looking for other parts? See all Buick Regal parts & accessories.
Top Picks at a Glance
| Best Reviewed A top-rated pick with lots of positive feedback | Bosch 15131 Premium Fit Oxygen Sensor |  |
| Most Popular A crowd favorite that many people choose with confidence | DAVRPES 234-4763 Heated Upstream Oxygen O2 Sensor |  |
| Best Quality Built to a higher standard if you want something more solid | Sangyue 2-Pack Oxygen O2 Sensors Kit for 2.4L Engines (Upstream + Downstream) |  |
| Best Budget The cheapest option that still gets the job done reliably | QIJIAUTO O2 Oxygen Sensor 234-4337 SG277, 4-Wire Upstream/Downstream |  |
| Most Sold A high-volume bestseller chosen again and again | A-Premium O2 Oxygen Sensor 4-Pack (Upstream & Downstream) |  |
| Best Value for Money The sweet spot between price and what you get | GAGOLCAR Oxygen Sensor Downstream Compatible with Buick Regal (13014) |  |
| Best Overall The best all-around choice for most situations | A-Premium Heated Oxygen (O2) Sensor — Upstream for Buick Park Avenue/Regal and Select GM Trucks (3‑wire) |  |
1. Bosch 15131 Premium Fit Oxygen Sensor
| Brand | Bosch |
|---|---|
| Material | Stainless Steel |
| Maximum Supply Voltage | 12 Volts (DC) |
| Mounting Type | Flange Mount |
This Bosch 15131 is a direct-fit oxygen sensor intended to replace the factory sensor on compatible Buick Regal applications. It measures the oxygen content in the exhaust and feeds that data to the engine control unit so air-fuel mixture and emissions are managed correctly. Notable features include a double laser-welded stainless steel body for corrosion resistance, a fast-acting heater to reach operating temperature quickly, and factory-style connector and pre-coated threads to simplify installation. In real-world use the sensor restores proper closed-loop fuel control, can clear related check-engine codes, and helps maintain fuel economy and emissions compliance when fitted correctly. Installation is straightforward for a technician or experienced DIYer using the right oxygen-sensor socket, but longevity varies with exhaust conditions and occasional reports cite early failures. If your Regal needs a reliable replacement sensor that matches factory fit and function, this Bosch is a practical choice; if you require extended high-mileage durability in severe conditions, consider higher-end specialty options.
Best for: Reliability-focused buyers who want a factory-quality replacement that restores proper emissions and fuel control on a Buick Regal without fuss.
Less Ideal for: Drivers who need a heavy-duty or extended-life sensor for extreme-duty, high-mileage, or performance engines should consider specialty aftermarket options.
- Direct-fit connector and wiring harness for simple plug-and-play replacement
- Double laser-welded stainless steel body resists corrosion from exhaust exposure
- Fast-acting heater reduces warm-up time so the sensor reaches operating temperature quickly
- Threads pre-coated with anti-seize for easier installation and future removal
- Some users report variable longevity depending on exhaust conditions
- Not a specialized high-mileage or motorsport sensor for extreme environments
Verdict A practical factory-style replacement sensor that restores proper engine fueling and emissions control on a Buick Regal for buyers prioritizing reliability.
2. DAVRPES 234-4763 Heated Upstream Oxygen O2 Sensor
| Mounting Type | Flange Mount |
|---|---|
| Output Type | Digital |
| Sensor Type | Heated |
| Wire Quantity | 4 Wires |
This DAVRPES 234-4763 is an aftermarket heated upstream oxygen sensor intended to replace a failed factory sensor on compatible vehicles. It installs where the upstream O2 sensor measures exhaust oxygen before the catalytic converter and provides the engine computer with the voltage signal needed to adjust air-fuel mixture. The sensor ships as a single unit with a four-wire connector and a threaded, flange-mount design that mirrors factory fitment, and the built-in heater helps it reach operating temperature faster for quicker closed-loop fueling. For everyday use it delivers the basic function you need to clear a check-engine light tied to a bad sensor and restore fuel economy and emissions control. Reports from owners show generally straightforward installation and reliable operation, though there are a few instances of early failures or connector/strain-relief wear. This part is a practical, lower-cost replacement with a two-year seller warranty, but buyers seeking guaranteed long-term durability or OEM-brand backing should consider branded factory-quality alternatives.
Best for: Buyers who prioritize quick, convenient repairs and want an affordable aftermarket replacement to restore drivability and fuel control without sourcing OEM parts.
Less Ideal for: Drivers who want guaranteed long-term OEM-brand durability or who prefer parts tested and certified by the original manufacturer should consider factory-brand replacements.
- Heated sensing element for faster warm-up and stable closed-loop operation
- Four-wire design with matched connector for direct replacement fit
- Threaded flange mount follows factory-style installation for most compatible vehicles
- Backed by a two-year seller warranty and aftermarket support
- Some user reports of connector strain-relief deterioration over time
- A few reviews indicate possible early failures on certain vehicles
Verdict A convenient, budget-friendly heated upstream O2 sensor that restores function for compatible Buick Regal and related models but may not match long-term OEM durability.
3. Sangyue 2-Pack Oxygen O2 Sensors Kit for 2.4L Engines (Upstream + Downstream)
| Mounting Type | Flange Mount |
|---|---|
| Output Type | NPN, PNP, Push-Pull |
| Specific Uses For Product | Oxygen O2 Sensor |
This Sangyue 2-pack supplies both upstream and downstream oxygen sensors intended for 2.4L Buick engines and is used to replace failed sensors that trigger fuel trim and emissions codes. Installation is the same as a factory replacement: unplug the old sensor, remove it from the exhaust flange, and fit the new sensor into the same position using the existing connector. The sensors offer multi-output compatibility (NPN, PNP, push-pull) and flange mounting that matches factory-style installation, so they integrate into the vehicle wiring and exhaust without adapters. Practical benefits include restoring accurate O2 readings for improved fuel control and emissions performance and having both bank positions covered in one purchase. Limitations are that this is an aftermarket reverse-engineered part rather than a factory supplier component and fitment is restricted to the specified 2.4L Buick applications, so careful vehicle verification is required before purchase.
Best for: Performance-oriented owners who prioritize restoring correct air/fuel control and emissions function on 2.4L Buick Regal engines and want a matched upstream/downstream sensor set for tuning or maintenance.
Less Ideal for: Buyers seeking a direct factory-supplier part or broader multi-model compatibility should consider other options or OEM replacements.
- Includes both upstream and downstream sensors for a complete replacement job
- Flange-mount design matches factory installation points for straightforward fitment
- Supports multiple output types (NPN, PNP, push-pull) for broad electrical compatibility
- Sold as a matched pair which helps ensure consistent sensor response between positions
- Aftermarket reverse-engineered unit rather than a factory supplier part
- Fitment limited to specific 2.4L Buick/GM applications so verification is required
Verdict A matched upstream and downstream aftermarket O2 sensor pair aimed at restoring fuel control on 2.4L Buick engines, trading OEM sourcing for a complete, ready-to-install kit.
4. QIJIAUTO O2 Oxygen Sensor 234-4337 SG277, 4-Wire Upstream/Downstream
| Mounting Type | Flange Mount |
|---|---|
| Output Type | Analog |
| Specific Uses For Product | Oxygen Sensor |
| Upper Temperature Rating | 392 Degrees Fahrenheit |
This QIJIAUTO oxygen sensor is a straightforward replacement designed to clear O2-related check engine codes and restore proper air/fuel feedback on compatible vehicles. It features a 4-wire connector that matches factory-style wiring, an optimized harness length for easier installation, and a flange-mount design for direct-fit swaps. In everyday use it replaces a failing upstream or downstream sensor to stabilize idle, improve fuel trim behavior, and help the engine control unit return to normal operation. The sensor is metal-bodied and rated for high temperatures, so it will tolerate exhaust conditions typically seen on older Buicks and related GM platforms. As a budget option it delivers practical functionality at a low cost, though buyers should confirm engine size and sensor bank/position before ordering and be prepared to handle basic installation or shop labor if needed. Fitment is limited to the specified 1996–2004 Buick/Chevy/GMC models, so this is not a universal fix.
Best for: Budget-conscious owners seeking an affordable, direct-fit oxygen sensor to fix check engine codes and restore drivability on a Buick Regal or other specified GM models.
Less Ideal for: Drivers who prioritize maximum long-term durability or exact factory-equivalent longevity should consider higher-end or OEM replacement sensors.
- 4-wire configuration with factory-style connector reduces wiring mismatches
- Optimized harness length simplifies installation without extra wiring
- Flange-mount direct-fit design suitable for upstream or downstream replacement
- High temperature rating supports typical exhaust operating conditions
- Compatibility limited to specific Buick/Chevy/GMC model years and engine positions
- Low-cost aftermarket build may not match long-term durability of factory-quality sensors
Verdict An inexpensive, direct-fit 4-wire oxygen sensor that restores function on specified Buick Regal-era GM models but trades some long-term durability for its low price.
5. A-Premium O2 Oxygen Sensor 4-Pack (Upstream & Downstream)
| Brand | A-Premium |
|---|---|
| Manufacturer Part Number | APOS0969PC |
| OEM Part Number | 25312211, 25315373, 25163080, 25164488, 25312194, 250-24018, 25161130, 19178924, 25164983, 25312196, 250-24340 |
| Pack Quantity | 4-PC Set |
This four-piece A-Premium oxygen sensor kit provides upstream and downstream replacements for vehicles that require the listed part numbers. Installers typically use these as direct factory-quality replacements to restore accurate air-fuel readings and clear emissions-related fault codes. The set includes multiple connector styles to match original harnesses and covers both front and rear bank positions, which is useful when multiple sensors are failing at once. Practical benefits include ready compatibility with supported Buick engines and the convenience of replacing all affected sensors in one purchase. Limitations are that fitment is restricted to specific model years and V6 engine variants, so you must verify the exact year and engine before ordering, and the listing does not include detailed installation hardware or extended technical documentation. The manufacturer offers a one-year unlimited-mileage guarantee, which provides some reassurance for mainstream buyers seeking lower risk when choosing an aftermarket sensor set.
Best for: Risk-averse mainstream buyers who prioritize a straightforward, lower-risk replacement that restores factory emissions monitoring without needing high-end performance parts.
Less Ideal for: Drivers who want plug-and-play fitment for models outside the covered Buick Regal years or who need performance-grade sensors for tuning or race applications should look elsewhere.
- Includes both upstream and downstream sensors so multiple failing sensors can be replaced at once.
- Sold as a four-piece set matching common factory part numbers for direct replacement.
- Connector styles and wiring are arranged to match factory harnesses for simpler installation.
- One-year unlimited-mileage guarantee from the manufacturer provides added confidence.
- Compatibility is limited to specific Buick model years and V6 engine families so it is not a universal fit.
- No detailed installation instructions or additional hardware are included in the listing.
Verdict A convenient four-piece replacement set for supported Buick V6 models that reduces installation risk by matching factory part numbers and connectors.
6. GAGOLCAR Oxygen Sensor Downstream Compatible with Buick Regal (13014)
| Mounting Type | Exhaust Mount |
|---|---|
| Output Type | electrical signal |
| Measurement Accuracy | ±1.5% |
| Material Type | Stainless Steel |
This GAGOLCAR downstream oxygen sensor is a direct-replacement style unit meant to restore proper air-fuel sensing on compatible Buick Regal engines. It installs in the exhaust downstream location and produces an electrical signal that the engine computer uses to adjust fuel trim and monitor catalytic converter performance. The sensor is stainless steel with laser-welded construction and a stated measurement accuracy of plus or minus 1.5 percent, which suggests consistent readings compared with worn OE parts. Typical use is straightforward: remove the old downstream sensor, fit this sensor into the exhaust bung, and reconnect the harness so the PCM regains accurate oxygen feedback. Practical benefits include corrosion-resistant construction and broad fitment listings for Regal model years covered in the compatibility notes, making replacement easier for owners who want a low-cost fix. Limitations are common to aftermarket sensors: fitment must be confirmed against your Regal's exact year and engine, and plug/pin differences or connector length can require an adapter or modification on some trims.
Best for: Practical optimizers who want an affordable, functional replacement to keep a Buick Regal running efficiently without paying dealer prices, and who are comfortable verifying fitment before installation.
Less Ideal for: Drivers seeking a guaranteed factory-quality OEM part or plug-and-play warranty-backed replacement should consider factory replacement options or dealer-sourced sensors instead.
- Stainless steel, double laser-welded body for improved durability against exhaust conditions
- Listed measurement accuracy of ±1.5% for consistent oxygen readings
- Designed as a direct downstream replacement to restore ECU air-fuel feedback
- Broad OEM part number cross-reference list improving chances of correct fit for older Regals
- Compatibility depends on exact year and engine trim so incorrect selection is possible
- Aftermarket connector or harness differences may require an adapter or minor wiring work
Verdict A cost-efficient downstream oxygen sensor that offers durable construction and accurate readings for compatible Buick Regal owners who verify fitment before buying.
7. A-Premium Heated Oxygen (O2) Sensor — Upstream for Buick Park Avenue/Regal and Select GM Trucks (3‑wire)
| Wire Quantity | 3 |
|---|---|
| Mounting Type | Threaded |
| Sensor Type | Heated |
| Connector Gender | Female |
| Package Quantity | 1x Oxygen Sensor |
This A-Premium heated upstream O2 sensor replaces a failed upstream sensor to restore the engine control module's air-fuel feedback loop and clear emissions-related faults on compatible Buick Regal 1993 3.8L applications. It uses a threaded installation and a three-wire female connector that plugs into the factory harness, so installation is typical of direct-fit sensors and can be completed with basic tools and a sensor socket. The sensor is shipped boxed with the wiring and connector pre-attached and includes a heated element for faster warm-up and more stable readings at idle and during cold starts. Buyers should appreciate that it lists multiple compatible reference numbers for Regal applications and carries a one-year unlimited-mileage guarantee from the brand. Be aware that fitment on older vehicles can be sensitive to exact engine/transmission combinations, so confirm connector type and mounting location before install; some users report intermittent failures or fitment issues on certain vehicles, which means it may not match factory parts every time.
Best for: Balanced buyers who want a practical, budget-conscious factory-style replacement to keep an older Buick Regal running cleanly without hunting for OEM parts.
Less Ideal for: Drivers seeking factory-sourced parts with guaranteed original fitment or those who need a long-term heavy-duty commercial solution should look at OEM or higher-end suppliers instead.
- Direct-replacement upstream sensor with factory-style threaded mounting for straightforward installation
- Heated element for quicker warm-up and more consistent readings during cold starts
- Pre-attached 3-wire female connector that aligns with factory harness on listed Regal application
- Boxed packaging and brand support with a one-year unlimited-mileage guarantee
- Fitment can be sensitive to specific engine/transmission variants and may not match every factory connector on older vehicles
- Some buyers have reported early failures or intermittent check-engine-light codes on certain vehicles
Verdict A practical, heated upstream replacement that usually restores proper emissions control on 1993 Buick Regal 3.8L but requires careful fitment verification for older vehicles.
Choosing the Right Buick Regal Oxygen Sensor: Key Factors to Consider
Vehicle Fitment and Compatibility
Correct fitment ensures the sensor plugs into the Regal's existing harness and screws into the correct exhaust boss without modification. Mismatched threads, connector types, or sensing locations can lead to installation delays, exhaust leaks, or persistent error codes. Always verify the sensor references the specific engine family and model years of the Buick Regal you own. Compatibility also affects how the engine control module interprets the sensor signal. A sensor that matches OEM electrical and mounting specifications will more reliably regulate air-fuel ratios and avoid drivability issues. In practice, this minimizes additional troubleshooting after installation.
Sensor Type and Signal Characteristics
Oxygen sensors come in different technologies and output behaviors, which determine how the ECU reads exhaust oxygen content. Knowing whether a sensor is intended as an upstream or downstream unit, and whether it uses narrowband or wideband signaling, helps you pick a sensor that matches the vehicle's control strategy. Choosing the wrong signal type can cause incorrect fuel trims or continuous fault flags. Signal characteristics like response speed and output voltage range determine how quickly the engine control picks up changes in combustion. Faster, stable signals typically yield smoother idle and better transient performance, while slower or noisy sensors can degrade control precision.
Response Time and Accuracy
Response time measures how quickly the sensor reacts to changes in exhaust composition. A sensor with faster response reduces the lag between combustion changes and ECU correction, improving fuel economy and emissions control. Accuracy across the typical operating range ensures the ECU receives reliable data for maintaining optimal air-fuel ratios. Sensors with consistent, repeatable outputs are less likely to cause false lean or rich conditions. When diagnosing drivability issues, replacing slow or drifting sensors often restores normal behavior without other interventions.
Durability and Environmental Resistance
Oxygen sensors operate in high heat and corrosive exhaust conditions, so materials and protective features matter for lifespan. Look for sensors with robust housings, protective sleeves over the sensing element, and corrosion-resistant threads to resist premature failure. Thermal cycling resistance helps maintain stability over many heat-up and cool-down cycles common in daily driving. Durability reduces the likelihood of intermittent faults and means fewer replacements over the vehicle's life. Sensors exposed to oil, coolant, or heavy road salt require more resilient construction to maintain accurate readings.
Wiring and Connector Quality
Good wiring and a secure connector reduce the risk of intermittent electrical faults that trigger error codes or erratic readings. Heat-resistant insulation and strain relief at the connector improve longevity in the exhaust area. A connector that matches factory pins and locking mechanisms simplifies installation and ensures a solid electrical connection. Poor connectors or thin wires can lead to increased resistance, signal degradation, or broken connections during routine maintenance. Choosing sensors with OEM-style connectors typically minimizes post-install troubleshooting.
Installation Ease and Serviceability
Ease of installation can save time and reduce the risk of damage during replacement. Features such as pre-attached harnesses of the correct length, anti-seize on threads, or included gaskets and hardware help streamline the job. Consider sensor accessibility on the Buick Regal; some locations may require fewer components to be removed, making a plug-and-play sensor more convenient. Serviceability also covers the availability of replacement parts and documentation like wiring diagrams or torque specifications. Clear installation guidance reduces the chance of improper torque or connector seating, both of which can create faults after installation.
FAQ
What are common O2 sensor symptoms in a Buick Regal?
Common symptoms often include a persistent check engine light, reduced fuel economy, and rough idle. You may also notice hesitation during acceleration or increased emissions on an inspection. These signs usually point to a sensor that is slow, contaminated, or electrically faulty.
How do I know if the check engine light is caused by the oxygen sensor?
A diagnostic scan will reveal codes related to oxygen sensors, such as heater circuit faults or slow response codes. Live data showing stuck or slow-changing oxygen sensor voltage is another indicator. Since multiple systems can trigger similar symptoms, combine code reading with sensor voltage behavior for a clearer diagnosis.
Can I test an oxygen sensor myself on a Buick Regal?
You can perform basic checks using a scan tool to view live voltage and heater circuit status, and a multimeter to test connector voltages and resistance. Observing rapid voltage swings from about 0.1 to 0.9 volts on upstream sensors during warm operation usually indicates proper function. More advanced testing may require specialized equipment and safety precautions around the exhaust.
Is it necessary to replace both upstream and downstream sensors at the same time?
It often depends on the age and condition of each sensor. Upstream sensors typically impact fuel trim more directly, while downstream sensors monitor catalyst efficiency. If only one sensor shows fault codes or degraded performance, replacing that unit can resolve the issue. Replacing both can be sensible when both show wear or when one failed after long service life.
Will installation of a new oxygen sensor clear the check engine light?
Replacing a faulty sensor can cause related codes to clear after the ECU completes its readiness cycles, or you can clear codes with a scan tool. If the light returns, further diagnosis is needed to confirm there are no other underlying issues such as wiring faults, exhaust leaks, or fuel delivery problems.
What is bank 1 sensor 1 and why does it matter?
Bank 1 sensor 1 refers to the upstream oxygen sensor located before the catalytic converter on the same side as cylinder one. It is crucial because it directly informs the ECU about the air-fuel condition for immediate fuel trim adjustments. Problems with this sensor commonly lead to drivability and emissions issues.
How We Chose the Best Buick Regal Oxygen Sensor
We selected products for this list using criteria that matter specifically for Buick Regal oxygen sensor replacements. Our primary filters included accurate vehicle fitment to ensure the sensor matches the Regal model years and engine variants, and verified connector and thread specifications to avoid installation issues. We prioritized sensor response time and voltage stability because those characteristics directly affect fuel trim and emissions control. Materials and protective features were assessed to judge durability against heat and contaminants common in exhaust systems. Finally, we considered ease of installation, including plug-and-play wiring and access to replacement hardware. We excluded listings with unclear fitment information, missing electrical specifications, or no stated warranty coverage. We also filtered out sensors lacking documented resistance or response curves, since those details are essential for matching factory control strategies. The result is a shortlist focused on compatibility, electrical performance, durability, and installability for Buick Regal owners.
Our full evaluation process is outlined in our review methodology.
Conclusion
When selecting a Buick Regal oxygen sensor, prioritize correct fitment, the proper sensor type for the vehicle's control strategy, and reliable electrical characteristics. Response time and durability are key tradeoffs: faster, stable sensors improve drivability, while rugged construction reduces repeat replacements. Consider wiring and connector quality to avoid installation headaches, and use diagnostic scans to confirm which sensor needs swapping. Focusing on these factors will help you restore fuel economy, lower emissions, and reduce the chance of repeat faults.
Explore More:
- Check out all Buick Regal parts & accessories
- Explore Engine
- Browse all Auto Parts
