Note: This article contains affiliate links. If you click on these links and make a purchase, I may earn a small commission at no extra cost to you. This helps support my research and content. Read my full affiliate disclosure here.
If your Buick Enclave headlight assembly is damaged, cloudy, or no longer aligns properly, replacing it restores correct beam pattern and visibility. Choosing the right assembly matters for night driving, rain or fog performance, and maintaining proper fit with body panels. This guide covers the top shortlisted headlight assemblies for the Buick Enclave. We focused on options that meet common buyer needs and evaluated them against fitment, build quality, and light output. Read on to find assemblies that suit your repair or upgrade goals.
Looking for other parts? See all Buick Enclave parts & accessories.
Top Picks at a Glance
| Best Overall The best all-around choice for most situations | SCITOO Headlight Assembly Pair for 2013–2017 Buick Enclave |  |
| Best quality Built to a higher standard if you want something more solid | KTYHNPM Headlight Assembly Set for Buick Enclave (2013–2017) Left & Right with LED DRL |  |
| Best Value The sweet spot between price and what you get | Wtobybt Left Front Headlight Assembly for 2013–2017 Buick Enclave (Base/Convenience, without AFS) |  |
| Highest Rated A top-rated pick with lots of positive feedback | ANPART Headlight Assembly Right Passenger Side for 2013-2017 Buick Enclave |  |
| Most Popular A crowd favorite that many people choose with confidence | LBRST Headlight Assembly for Buick Enclave 2013–2017, Passenger Side |  |
| Best Seller A high-volume bestseller chosen again and again | SHATUOA HID/Xenon Headlight Assembly for Buick Enclave (Left, 2013–2017, No AFS) |  |
1. SCITOO Headlight Assembly Pair for 2013–2017 Buick Enclave
| Light Source | LED |
|---|---|
| Lens Material | Polycarbonate |
| Auto Part Position | Front Left, Front Right |
| Automotive Fit Type | Vehicle Specific Fit |
These SCITOO headlight assemblies replace the factory front left and right units on 2013–2017 Buick Enclaves and are designed for direct installation without modification. They use polycarbonate lenses and sealed housings to resist moisture and road debris, and the assemblies accept LED bulb sources for clear illumination and improved night visibility. The pair arrives ready to mount and is intended as a full replacement rather than a bulb-only upgrade, making it suitable for damaged or yellowed originals. Practical benefits include a factory-style chrome appearance and a sealed design that helps prevent fogging. Limitations to keep in mind are that fit and mount strength can vary by unit and occasional shipping damage has been reported, so inspect parts immediately and plan for professional help if alignment or broken mounting tabs are present.
Best for: A balanced all-round buyer who wants a full, direct-replacement headlight pair to restore appearance and night visibility on a 2013–2017 Buick Enclave without extensive modification.
Less Ideal for: Buyers seeking an exact factory-manufactured unit or those who need guaranteed perfect mounting hardware will want to consider dealer-sourced or higher-end alternatives.
- Vehicle-specific fit for 2013–2017 Buick Enclave designed to replace both left and right assemblies
- Polycarbonate lens and sealed housing help resist moisture and road debris
- Compatibility with LED light sources for improved nighttime illumination
- Arrives as a complete pair ready for bolt-in installation with no drilling required
- Some customers report broken mounting points on arrival indicating variable quality control
- Not an exact factory part number though listed as OEM equivalent, so minor fitment or alignment adjustments may be necessary
Verdict: A practical, vehicle-specific headlight pair that restores factory-style appearance and improves night visibility for 2013–2017 Buick Enclave owners.
2. KTYHNPM Headlight Assembly Set for Buick Enclave (2013–2017) Left & Right with LED DRL
| Applicable Models | 2013-2017 Buick Enclave Base/Convenience (Without AFS) |
|---|---|
| Light Source Type | Halogen/LED/HID |
| High/Low Beam Bulb | D3S (Bulbs Not Included) |
| Turn Signal Bulb | WY21W (Bulb Not Included) |
| Installation Position | Front Left & Front Right |
This headlight assembly set replaces both left and right units on 2013–2017 Buick Enclave Base and Convenience models without Adaptive Frontlighting Systems. Designed as a direct replacement, the assemblies accept halogen, HID (D3S) or LED light sources and include integrated LED daytime running lights for improved daytime visibility. Construction uses coated polypropylene housings and clear lenses to resist cracking and maintain appearance, and the units are supplied as a closed assembled pair so wiring plugs match factory 6-pin connectors. Practical benefits include straightforward installation for someone comfortable with automotive electrical connectors, a factory-style look, and compatibility with the vehicle models listed. Limitations are that bulbs are not included, the assemblies are not compatible with 9- or 13-pin setups or Leather/Premium trim levels, and professional installation is recommended for alignment and electrical checks. For drivers prioritizing strong illumination and a factory-quality replacement with LED DRLs, these assemblies deliver a performance-oriented upgrade when fitment matches.
Best for: Performance-oriented buyers seeking a factory-quality replacement with modern LED DRLs who prioritize strong illumination and direct-fit compatibility for a Buick Enclave from 2013–2017 without AFS.
Less Ideal for: Drivers with Leather or Premium trim Enclaves, vehicles equipped with Adaptive Frontlighting Systems, or anyone needing a plug configuration other than 6-pin should look for a different assembly.
- Direct replacement fit for Buick Enclave Base/Convenience 2013–2017 without AFS, matching factory 6-pin connector
- Integrated LED daytime running lights for better daytime visibility and modern look
- Accepts halogen, HID (D3S) or LED bulbs for flexible lighting upgrades
- Coated polypropylene housing and clear lens aimed at durability and impact resistance
- Bulbs are not included, requiring separate purchase for operation
- Not compatible with Leather/Premium trim levels or AFS-equipped vehicles
- Only supports 6-pin electrical configuration, not 9-pin or 13-pin systems
Verdict: A factory-style direct-replacement headlight pair with LED DRLs aimed at drivers who want improved illumination and a performance-oriented upgrade for 2013–2017 Buick Enclave models without AFS.
3. Wtobybt Left Front Headlight Assembly for 2013–2017 Buick Enclave (Base/Convenience, without AFS)
| Applicable Models | 2013-2017 Buick Enclave Base/Convenience (Without AFS) |
|---|---|
| Light Source | Halogen/LED/HID |
| High/Low Beam Bulb Type | D3S (Bulbs Not Included) |
| Additional Features | LED Daytime Running Light |
| Lens Material | Polycarbonate |
This Wtobybt left front headlight assembly is a plug-and-play replacement for 2013–2017 Buick Enclave Base and Convenience models that do not have AFS. It accepts D3S bulbs for high and low beam and includes LED daytime running lights while leaving bulbs out so you can reuse OEM bulbs or choose upgraded lamps. The housing is molded from coated PP with a clear polycarbonate lens intended to resist UV yellowing and minor impacts, and the assembly is built to match factory fit and mounting points for straightforward installation. Practical benefits include modern-looking LED DRL integration, a restored beam pattern when your original unit is damaged, and durability improvements over cheaper aftermarket housings. Limitations are that bulbs are not included, it is only compatible with 6-pin connectors (not 9- or 13-pin), and it does not fit Leather or Premium Enclave trims or vehicles equipped with AFS, so check connector and trim before buying.
Best for: Practical optimizers looking to restore factory-style lighting on a Buick Enclave Base or Convenience without AFS while balancing durability and cost rather than buying dealer parts.
Less Ideal for: Buyers who need a complete plug-and-play kit with bulbs included or owners of Leather, Premium, or AFS-equipped Enclave models should look for a different option.
- Direct replacement design for 2013–2017 Enclave Base/Convenience without AFS for easy fitment
- Polycarbonate lens and coated PP housing improve UV resistance and impact durability
- Includes LED daytime running light integration for updated appearance and visibility
- Accepts standard D3S high/low beam bulbs so you can use existing bulbs or choose upgrades
- Bulbs are not included so additional purchase or transfer from the old unit is required
- Compatible only with 6-pin connector versions and not suitable for AFS-equipped or Leather/Premium trims
Verdict: A budget-conscious, factory-fit replacement for non-AFS Buick Enclave Base/Convenience models that restores function and adds LED DRL but requires separate bulbs and correct 6-pin fitment.
4. ANPART Headlight Assembly Right Passenger Side for 2013-2017 Buick Enclave
| Compatible Model Years | 2013-2017 |
|---|---|
| Light Source | LED |
| Voltage | 12 Volts (DC) |
| Auto Part Position | Right |
This ANPART right passenger headlight assembly is a direct, bolt-on replacement for 2013–2017 Buick Enclave models designed to restore factory-style lighting and weather protection. It accepts D3S for high/low beam and WY21W for the turn signal so you reuse or source compatible bulbs, and the unit is described as fully sealed against dust and water for long-term durability. Typical use is straightforward swap-out installation that keeps original mounting points and wiring intact, which suits owners who want a dependable replacement without fabrication. Notable features include an effective heat dissipation approach and LED-compatible optics that aim to reduce power draw and improve nighttime coverage. The assembly arrives without bulbs or installation instructions, so plan for basic tools and to transfer your old headlight controller or bulbs. Fit and finish are manufacturer-stated to meet DOT and SAE requirements, but buyers should confirm connector and ballast compatibility with their vehicle before install.
Best for: Reliability-focused buyers who prioritize a factory-style, weatherproof replacement that reinstates original fitment and lighting performance on a Buick Enclave.
Less Ideal for: Buyers looking for a plug-and-play LED retrofit with bulbs included or a unit that eliminates the need to reuse the original headlight controller should consider alternatives.
- Direct bolt-on design for 2013–2017 Buick Enclave minimizes modification and simplifies installation
- Fully sealed construction provides waterproof and dustproof protection for harsh conditions
- Designed for D3S high/low beam and WY21W turn signal compatibility so existing bulb types can be used
- Manufacturer states DOT and SAE certification compliance for legal road use
- Bulbs and installation instructions are not included, requiring additional purchases or reuse of old parts
- May require transferring the original headlight controller or ballast for full functionality
Verdict: A factory-style, sealed right-side headlight assembly for Buick Enclave owners who want a reliable, direct replacement but will need to supply bulbs or reuse their original controller.
5. LBRST Headlight Assembly for Buick Enclave 2013–2017, Passenger Side
| Compatible with Vehicle Type | for Buick Enclave 2013-2017 |
|---|---|
| Light Source | LED |
| Voltage | 12 |
| Wattage | 24 |
| Auto Part Position | Front Outside |
This LBRST headlight assembly replaces the passenger-side unit on Buick Enclave models from 2013 to 2017 and is intended as a factory-quality direct bolt-on replacement. It houses D3S bulbs for high/low beam and a WY21W for the turn signal, and the polycarbonate lens and reinforced back shell are marketed to resist yellowing and impact. Installation is typical for a headlight swap: remove the old unit, transfer bulbs if needed, and bolt the new assembly into place; most buyers report a straightforward fit but a few noted minor trimming or alignment adjustments. The assembly comes pre-sealed and packaged with protective reinforcement, though some reviewers mentioned occasional condensation and inconsistent electrical function on certain units, so check sockets and seals after installation. For owners who want a restored appearance and maintained visibility without modifying wiring or optics, this offers a practical replacement that restores factory styling and beam types while keeping installation simple.
Best for: Convenience-driven buyers who want a ready-to-install, factory-style passenger headlight to restore appearance and visibility on a 2013–2017 Buick Enclave without aftermarket wiring or major modification.
Less Ideal for: Drivers seeking upgraded lighting performance such as brighter aftermarket projectors or built-in LED conversions should consider performance-focused assemblies instead.
- Direct bolt-on replacement designed for Buick Enclave 2013–2017 passenger side fitment
- Uses factory-style bulb types (D3S high/low beam and WY21W turn signal) for straightforward bulb compatibility
- Polycarbonate lens and reinforced back shell intended to resist yellowing and impact
- Pre-sealed and packaged to reduce shipping damage and simplify installation
- Some buyers reported condensation inside the housing after installation
- A few units showed inconsistent electrical function for high beam or LED strip lights
Verdict: A practical, direct-replacement passenger headlight that restores factory appearance and uses factory-style bulbs for easy installation on 2013–2017 Buick Enclave models.
6. SHATUOA HID/Xenon Headlight Assembly for Buick Enclave (Left, 2013–2017, No AFS)
| Light Source | HID/Xenon |
|---|---|
| Voltage | 12 Volts |
| Auto Part Position | Front Left |
| Lens Material | Polypropylene |
This SHATUOA headlight assembly is a factory-style replacement for Buick Enclave models from 2013 through 2017 that do not have Adaptive Frontlighting Systems. It houses D3S high and low beam sockets and supports LED daytime running lights while using a polypropylene housing intended to resist cracking. The unit is designed for direct fitment to the vehicle wiring harness for the 6-pin connector variant, so installation is straightforward for a professional installer or an experienced DIYer. Practical benefits include restored beam aim and modern DRL appearance, plus a sealed closed assembly that simplifies cleaning and long-term durability. Limitations to note are that bulbs are not included, so you must purchase D3S and signal bulbs separately, and this specific unit will not fit Enclave models with AFS or vehicles using 9- or 13-pin connectors. Expect a replacement that closely matches factory fit and function when matched to the correct non-AFS Enclave submodel.
Best for: A risk-averse mainstream buyer seeking a reliable, factory-style headlight replacement for a Buick Enclave who prioritizes correct fitment and long-term durability over aftermarket styling.
Less Ideal for: Owners whose Enclave has adaptive frontlighting or a different connector count should seek a compatible AFS-specific or correct-pin assembly instead.
- Direct replacement designed to match factory mounting and wiring for non-AFS Buick Enclave models
- Supports HID/Xenon D3S high and low beams and includes LED daytime running light functionality
- Polypropylene housing with coating for improved durability and resistance to cracking
- Closed assembly design reduces maintenance and simplifies cleaning
- Bulbs are not included so additional purchases are required to restore lighting
- Only fits Enclave models without AFS and specifically the 6-pin connector configuration
Verdict: A factory-style left headlight assembly that restores original lighting and fit for 2013–2017 Buick Enclave models without AFS, but you must supply bulbs and confirm the 6-pin connector match.
Choosing the Right Buick Enclave Headlight Assembly: Key Factors to Consider
Fitment And Alignment
Correct fitment ensures the assembly mounts securely and aligns with the vehicle's factory aiming points. Poor fitment can cause gaps with adjacent body panels, lead to water intrusion, and prevent proper beam adjustment. Always verify the assembly is specified for the Buick Enclave's model year and body style.
Alignment also affects headlight aim, which influences how light falls on the road and how oncoming drivers perceive glare. Assemblies designed to match factory mounting points reduce the need for modification and keep installation straightforward.
Lens Material And Clarity
Lens material affects long-term clarity and light transmission. Polycarbonate lenses are common and durable, but lower-grade finishes may yellow or haze with UV exposure, reducing light output and beam cutoff sharpness. Consider assemblies with UV-resistant coatings or replaceable lens options to maintain performance.
Clear, well-shaped lenses also play a role in beam pattern control. A clean lens surface ensures consistent dispersion and helps preserve the designed beam cutoff, which is important for visibility without causing glare.
Optical Design And Beam Pattern
The optical design—reflector geometry or projector optics—determines beam pattern, spread, and cutoff. A well-engineered pattern provides a bright, usable field of view without excessive scatter that can blind other drivers. Pay attention to whether the assembly uses projector housings for tighter cutoffs or reflector setups for wider spread.
Beam pattern consistency matters for night driving and for passing vehicle inspection in areas with headlight aim regulations. Match the assembly's optical approach to your driving needs, whether long-range illumination or broad peripheral light is most important.
Bulb Compatibility And Electrical Fit
Confirm the headlight assembly accepts the proper bulb type and matches the vehicle's electrical connectors. Some assemblies are prewired for halogen bulbs, while others may be set up to accept LED modules or HID retrofit bulbs. Incorrect bulb type can lead to poor beam pattern, overheating, or connector issues.
Check for included harnesses, adapters, or instructions for integrating different bulb technologies. Reliable electrical fit reduces the chance of flicker, error messages, or premature failure.
Build Quality And Sealing
A well-built housing with quality seals prevents moisture ingress and corrosion of internal components. Poor sealing leads to condensation, which degrades optics and can damage reflectors or bulbs. Inspect whether assemblies use robust gaskets, proper drain paths, and durable fasteners.
Materials and finish also affect longevity. Corrosion-resistant metal brackets and fade-resistant plastics extend service life in varied climates, from wet regions to areas with heavy road salt use.
Installation And Replacement Ease
Ease of installation affects how quickly you can replace a damaged assembly and whether professional help is required. Assemblies that include mounting hardware, clear instructions, and plug-and-play connectors simplify the process. Consider whether partial disassembly of trim or bumper is necessary and whether the design allows for headlight aim adjustments after installation.
If you plan to change bulb types, factor in how straightforward it is to access the housing and replace bulbs or ballasts without removing the entire assembly.
How We Chose the Best Buick Enclave Headlight Assembly
To assemble this list we applied filters that reflect real-world repair and safety priorities for Buick Enclave owners. Primary evaluation criteria included exact vehicle-year fitment and mounting alignment to ensure proper beam aim and body panel gaps. We also assessed construction quality and materials, looking for robust housings, corrosion-resistant connectors, and durable lens materials that resist yellowing. Optical performance was evaluated by reported beam pattern consistency, lens clarity, and compatibility with the vehicle's specified bulb type or required socket. Electrical and thermal considerations were reviewed, including connector quality and accommodation for stock or upgraded lighting elements. We excluded listings that lacked clear model-year fit information, assemblies missing essential mounting hardware, or units with unclear electrical compatibility. The final selections prioritize assemblies that balance long-term durability, correct fitment, and reliable light output for safe driving.
Our full evaluation process is outlined in our review methodology.
FAQ
How do I know which headlight assembly fits my Buick Enclave?
Check the assembly listing for explicit Buick Enclave model-year and trim fitment information. Confirm mounting points and electrical connector types match your vehicle. If the listing includes fitment by year range, use your vehicle's model year to ensure alignment and correct beam aim without modification.
Can I switch bulb types when I replace the headlight assembly?
Often you can, but it depends on the assembly's socket and electrical compatibility. Some housings are designed for specific bulb types and optics. If you plan to change to LED or HID, verify the assembly supports that technology or that adapters and proper thermal management are available.
What causes headlight lens fogging and how can I prevent it?
Fogging often results from moisture entering the housing through failed seals, cracked lenses, or blocked vents. Preventive steps include choosing assemblies with quality gaskets and proper venting, ensuring a snug installation, and replacing any damaged seals. Periodic inspection can catch early signs of condensation before optics degrade.
Do replacement headlight assemblies require aim adjustment after installation?
Yes, most installations need final aim adjustment to align the beam with factory specifications. Even assemblies that fit correctly can shift during installation. Use the vehicle's aiming screws and follow recommended procedures to set vertical and horizontal aim so the pattern provides good roadway illumination without causing glare.
Are aftermarket assemblies as durable as factory units?
Durability varies by manufacturer and materials used. Well-made aftermarket assemblies can offer comparable longevity if they use quality housings, UV-resistant lenses, and corrosion-resistant hardware. Look for detailed construction information and robust sealing features when assessing durability.
Conclusion
When replacing a Buick Enclave headlight assembly, prioritize correct fitment, optical design, and reliable sealing. These factors have the biggest impact on beam aim, nighttime visibility, and long-term durability.Balance your needs between optical performance and ease of installation. Confirm bulb compatibility and aiming requirements before purchase to avoid surprises during replacement, and choose an assembly that matches the vehicle's mounting and electrical specs for the best outcome.
Explore More:
- Check out all Buick Enclave parts & accessories
- Explore Headlight Assemblies Maintenance & Repair Guides
- Explore Lighting
- Browse all Auto Parts
