Note: This article contains affiliate links. If you click on these links and make a purchase, I may earn a small commission at no extra cost to you. This helps support my research and content. Read my full affiliate disclaimer here.
If your Jeep Grand Cherokee feels rattly, harsh, or shifts more than it used to, the right engine mount can make a noticeable difference in comfort and component longevity. Choosing an appropriate mount affects vibration isolation, drivetrain alignment, and long-term durability. This guide presents a shortlist of the top options for Jeep Grand Cherokee engine mount replacements, chosen for reliable fitment and proven construction. Below we summarize the criteria used to evaluate each mount and guide you toward options that match your vehicle use and driving priorities.
Looking for other parts? See all Jeep Grand Cherokee parts & accessories.
Top Picks at a Glance
1. StanceMagic 3-Piece Engine Mount Set for 2011–2019 Jeep Grand Cherokee RWD (3.6L / 5.7L)
| Compatible vehicles | 2011–2019 Jeep Grand Cherokee RWD |
|---|---|
| Engines | V6 3.6L and V8 5.7L |
| Mount type | Solid / non-hydraulic |
| Materials | Heat-treated steel with rubber bushings |
This StanceMagic kit supplies the three direct-replacement engine/transmission mounts used on RWD Jeep Grand Cherokee models with the 3.6L V6 or 5.7L V8 engine. The mounts are solid, non-hydraulic pieces built from heat-treated steel with rubber bushings to mirror factory function and reduce engine vibration when installed. Typical use is as a like-for-like replacement when OEM mounts are worn and causing excess noise, vibration, or engine movement. The set claims factory-quality fit and includes the two front engine mounts and the triangular transmission mount used on automatic cars. Benefits include straightforward compatibility for the stated years and engines and construction intended to match factory durability. Limitations are that these are solid non-hydraulic mounts, so NVH characteristics may differ slightly from factory hydraulic mounts, and professional installation is recommended since torque specs and proper alignment matter. No installation instructions are included, so buyers should plan for a technician or shop time to ensure a correct, safe replacement.
Best for: Reliability-focused buyers who prioritize restoring factory-level engine stability and minimizing long-term maintenance on a Jeep Grand Cherokee RWD by replacing worn mounts with a direct aftermarket kit.
Less Ideal for: Drivers seeking a softer, factory-hydraulic feel or a do-it-yourselfer without mechanical experience should consider alternatives or plan for professional installation.
- Direct-replacement set matched to the listed Jeep Grand Cherokee RWD 2011–2019 engines
- Heat-treated steel with rubber bushings aimed at factory-like durability
- Includes the specific front left, front right, and triangular transmission mount so no piecemeal ordering
- Solid non-hydraulic design avoids vacuum lines or connections that can fail
- Solid non-hydraulic design can transmit more vibration and feel firmer than factory hydraulic mounts
- No installation instructions included and professional installation is recommended
Verdict A straightforward, reliability-focused replacement kit that restores engine support for 2011–2019 Jeep Grand Cherokee RWD but may feel firmer than hydraulic factory mounts.
2. JAVOUKA Engine and Transmission Mount Kit for Jeep Grand Cherokee 3.6L/5.7L RWD (2011–2019)
| Fitment | Jeep Grand Cherokee 3.6L/5.7L RWD 2011-2019 |
|---|---|
| Included Components | Front left motor mount, front right motor mount, rear transmission mount |
| Finish Type | Powder Coated |
| Unit Count | 3.0 Count |
This JAVOUKA kit replaces the front left, front right engine mounts and the rear transmission mount on Jeep Grand Cherokee 3.6L and 5.7L RWD models from 2011 through 2019. It is intended as a direct replacement to support and secure the engine and transmission, reduce vibration and noise, and restore drivetrain alignment. The mounts are powder coated and come as a three-piece set to simplify sourcing the common failed mount points in this vehicle. In practice the kit is used during routine repairs when worn mounts cause excessive engine movement, vibration in the cabin, or transmission shift issues. Buyers report good fitment for non-OEM parts and improved NVH after installation, though installation can require some effort and basic mechanical tools. The kit offers a value-oriented alternative to factory replacements, but it may need minor adjustments during fitment and will not carry the same factory warranty coverage as dealer parts.
Best for: Buyers who prioritize convenience and want a single, ready-to-install replacement kit to quickly restore a quieter, more stable Grand Cherokee without hunting for individual parts.
Less Ideal for: Shoppers seeking a lifetime factory-quality replacement or who prefer dealer-supported parts with extended warranty options should consider OEM or higher-end alternatives.
- Sold as a complete three-piece kit covering the common engine and transmission mounts for the Jeep Grand Cherokee so you get matching parts in one purchase
- Powder coated finish resists surface corrosion compared with uncoated replacements
- Designed as a direct replacement to simplify installation and avoid sourcing multiple part numbers
- Multiple customer reports note improved vibration isolation and resolved related drivability symptoms
- Fitment is non-OEM so some installations may require minor alignment or additional labor to achieve a perfect fit
- Manufacturer warranty and long-term durability may differ from factory or premium aftermarket mounts
Verdict A convenient, value-focused three-piece mount kit that restores engine stability and comfort for 2011–2019 Grand Cherokees but may require slight fitment adjustments compared with factory parts.
3. ONNURI Engine and Transmission Mount Kit for 3.7L Jeep Commander/Grand Cherokee (3‑piece)
| Fitment | 2006-2010 Jeep Commander 3.7L; 2005-2010 Jeep Grand Cherokee 3.7L |
|---|---|
| Kit contents | 2 motor mounts and 1 transmission mount |
| Part numbers | EM4103, EM4104, EM4153; interchange A5529, A5541, A5620 |
| Brand | ONNURI |
This ONNURI kit supplies the two motor mounts and one transmission mount needed to replace worn mounts on 3.7L Jeep Commander and Grand Cherokee models. Installed as a direct factory-quality replacement, the kit restores engine positioning and reduces vibration and noise transmitted to the chassis. The mounts are made to match the listed interchange and part numbers so fitment is straightforward for a mechanic familiar with these Jeeps. In use the heavier steel construction combined with rubber isolators aims to deliver a smoother idle and firmer load support under acceleration, which helps preserve driveline alignment and reduces strain on adjacent components. Limitations include the fact that these are replacement mounts rather than upgraded performance poly options, so drivers seeking stiffer engine control for track use may prefer aftermarket performance mounts. Also some buyers may expect OEM-branded packaging and documentation, which this kit does not provide.
Best for: Performance-oriented owners who prioritize restoring firm, factory-quality engine support and reduced vibration for daily driving and spirited street use.
Less Ideal for: Drivers looking for race or chassis-stiffening upgrades or those wanting OEM-branded parts and packaging should consider alternatives.
- Three-piece kit includes both motor mounts and the transmission mount for a complete replacement
- Designed to match factory interchange numbers and fitment for 3.7L Jeep Commander and Grand Cherokee
- Steel and rubber construction intended to reduce vibration and restore factory ride quality
- Straightforward fitment that simplifies installation for routine shop or DIY replacement
- Not a performance-oriented poly or solid mount, so it will not dramatically reduce engine movement for aggressive driving
- Packaging and branding differ from factory-branded parts which may concern buyers seeking OEM presentation
Verdict A complete, factory-compatible three-piece mount kit that restores quiet, stable engine support for 3.7L Jeep Commander and Grand Cherokee daily and spirited driving.
4. sherxibo Set of 3 Engine Motor Mounts for 2011–2021 Jeep Grand Cherokee and 2011–2024 Durango
| Unit Count | 3.0 Count |
|---|---|
| Manufacturer | sherxibo |
| Set Name | Set of 3 |
| Model | engine mount |
This sherxibo set supplies the three mounts typically replaced together when vibration or engine movement is noticeable on a Grand Cherokee. The kit includes front left, front right and a rear transmission mount so you can address both engine support and drivetrain torque control in one job. Buyers report straightforward bolt-in fitment for the listed Grand Cherokee years and engines and the mounts appear sturdy for a non-factory replacement. For DIYers the packaged set reduces part-sourcing time and keeps installation consistent across mounting points. Expect the mounts to restore smoother idle and reduce vibration entering the cabin compared with worn originals, but there is some risk of fitment variation on specific submodels so double-check interchange numbers before ordering. This is a value-focused solution: it provides a complete repair at a lower cost than factory-quality parts but lacks the brand assurance and long-term backing of OEM replacements.
Best for: Cost-conscious owners who prioritize fixing vibration and engine movement on a Grand Cherokee without paying OEM prices and who prefer doing the job themselves or having a local shop install an affordable complete kit.
Less Ideal for: Owners seeking a factory-quality, long-term guaranteed replacement or those unwilling to confirm exact interchange numbers before purchase should consider OEM or dealer parts instead.
- Complete three-piece kit replaces front left, front right and rear transmission mount in one purchase
- Designed to fit 2011–2021 Jeep Grand Cherokee 3.6L, 5.7L and 6.4L applications according to listing
- Many user reports of easy, bolt-in installation and immediate reduction in vibration
- Lower cost than factory-quality replacements, making it attractive for budget repairs
- Not marketed as a factory-quality item so long-term durability may be lower than OEM
- Some reviews note occasional fitment mismatch on specific submodels, so verification is necessary
Verdict A practical, wallet-friendly three-piece mount kit that restores engine stability on Grand Cherokees but requires fitment checks and accepts some longevity trade-offs versus factory-quality parts.
5. A-Premium Engine and Transmission Mount Kit for Jeep Grand Cherokee 3.7L (3-piece)
| Unit Count | 3.0 Count |
|---|---|
| Mounting Type | Rubber Mount |
| Manufacturer | PremiumpartsWhosale |
| Manufacturer Part Number | APEM417 |
This A-Premium kit supplies the front left, front right engine mounts and the transmission mount intended as direct replacements for 3.7L Jeep Grand Cherokee (2005–2010) and Commander (2006–2010) automatic transmissions. Each mount uses rubber mounting and the kit is marketed as meeting or exceeding factory specifications after quality control testing. In practical use the set lets you address common vibration and engine movement issues that develop with worn mounts and restores a firmer engine feel and quieter cabin on acceleration and idle. Installation is the usual bolt-on swap for a mechanically competent DIYer or a technician and the included three pieces cover the usual failure points in the engine/transmission support system. Important limitations are that this is an aftermarket kit rather than a factory-brand part and fitment applies only to the specified 3.7L automatic models, so confirm vehicle compatibility before purchase.
Best for: A risk-averse mainstream buyer who prioritizes restoring factory-like ride quality and reducing engine vibration on a 3.7L Jeep Grand Cherokee or Commander with automatic transmission.
Less Ideal for: Buyers seeking a factory-branded mount or those with non-3.7L engines or manual transmissions should consider alternative, vehicle-specific options.
- Three-piece kit covers both engine sides and the transmission mount so multiple worn mounts can be replaced at once
- Designed to match or exceed factory specifications according to the product description
- Rubber mounting reduces engine vibration and helps restore smoother idle and less drivetrain movement
- Includes reference numbers for direct fit verification to the specified Jeep 3.7L automatic models
- Aftermarket part rather than factory-branded so material and long-term durability can vary from OEM
- Fitment is limited to the 3.7L automatic Grand Cherokee and Commander models and is not suitable for other engines or transmissions
Verdict A convenient three-piece replacement kit that restores engine support and reduces vibration for 3.7L Jeep Grand Cherokee and Commander automatics, but it is an aftermarket alternative rather than a factory-branded part.
6. JDMON Engine and Transmission Mount Kit (3-piece) for 2011–2019 Jeep Grand Cherokee RWD
| Applicable Car Models | 2011-2019 Jeep Grand Cherokee RWD 3.6L 5.7L |
|---|---|
| Unit Count | 3.0 Count |
| Included Components | 3Pcs Engine Motor Mount & Transmission Mount Kit |
| Finish Type | Powder Coated |
This JDMON three-piece kit replaces the front motor mounts and rear transmission mount on 2011–2019 Jeep Grand Cherokee RWD 3.6L and 5.7L vehicles. It is intended as a direct-fit replacement for common factory part numbers and is typically used to restore engine stability, reduce vibration and drivetrain shock, and improve cabin comfort after original mounts wear out. The kit combines metal and rubber components with a powder-coated finish for corrosion resistance and durability in everyday driving conditions. Installation should be performed or checked by a professional because alignment and torque specifications matter for longevity. Expect clearer engine feel and less noise compared with worn mounts, though these aftermarket parts may not match exact factory materials or lifetime of premium OEM mounts. The package covers the primary mounts most owners need when tackling a single repair job, making it a practical, cost-conscious option for routine maintenance or restoring ride smoothness on older Grand Cherokees.
Best for: Practical optimizers looking to restore ride comfort and reduce engine vibration on a Jeep Grand Cherokee without overspending on dealer parts. Ideal for owners who prioritize sensible, value-focused repairs that get the vehicle back to a comfortable daily condition.
Less Ideal for: Buyers seeking exact factory-spec performance or the longest possible service life should consider higher-end factory-quality replacements or dealer parts instead.
- Designed to fit 2011–2019 Jeep Grand Cherokee RWD 3.6L and 5.7L for direct replacement of common factory part numbers
- Three-piece kit covers front motor mounts and the rear transmission mount so you can address multiple worn mounts at once
- Powder-coated finish and metal construction improve corrosion resistance and durability compared with plain cast parts
- Aftermarket construction and rubber compound may not match the long-term durability or precise NVH tuning of factory-quality mounts
Verdict A cost-conscious, direct-fit mount kit that fixes common vibration and stability issues on 2011–2019 Jeep Grand Cherokee RWD without the premium price of dealer parts.
7. TRQ 2-Piece Engine Mount Set for 1999–2004 Jeep Grand Cherokee 4.7L
| Fitment | 1999–2004 Jeep Grand Cherokee V8 4.7L |
|---|---|
| Quantity | 2 Piece Engine Mount Set |
| Finish Type | Powder Coated |
| Manufacturer | TRQ |
This TRQ kit supplies two direct-replacement engine mounts intended to restore factory-like engine support on 1999–2004 Jeep Grand Cherokee 4.7L V8 models. Installers will use the mounts to replace worn rubber mounts that cause engine vibration, noise, and drivetrain movement; TRQ advertises pre-assembled components and supplies reference numbers to simplify fit checks. In practice the mounts reduce engine shake and can make the vehicle feel smoother at idle and under load. The powder-coated, machined exterior suggests decent corrosion resistance and reviewers report straightforward installation when following TRQ's DIY videos. Common practical limitations are variability in long-term durability across vehicles and occasional fitment quirks that require retaining some original hardware or adding a small fastener for bracket holes. Buyers doing the job themselves should expect to need standard tools, deep sockets, and an engine-support jack or biasing method. For balanced buyers seeking a reliable aftermarket replacement, this kit offers good value but keep an eye on torque and fit during installation.
Best for: Balanced buyers who want a cost-effective, factory-style replacement that improves drivability without paying OEM prices and who are comfortable doing or supervising a straightforward installation.
Less Ideal for: Buyers seeking a lifetime, heavy-duty performance mount for high-power or off-road modified engines should consider performance-specific mounts instead.
- Direct-fit replacements for the specified 1999–2004 Jeep Grand Cherokee 4.7L V8, simplifying compatibility checks
- Pre-assembled components and available DIY videos that make installation easier for home mechanics
- Powder-coated, machined exterior for improved corrosion resistance and a finished appearance
- Reported to noticeably reduce engine vibration and improve smoothness when installed correctly
- Durability appears variable across some vehicles with isolated reports of premature failure
- May require reusing original fasteners or sourcing a small bolt for a bracket hole in some installations
Verdict A practical, cost-conscious direct-replacement mount set that restores engine stability for 1999–2004 Jeep Grand Cherokee 4.7L owners who want OEM-style performance without OEM pricing.
Choosing the Right Jeep Grand Cherokee Engine Mount: Key Factors to Consider
Material And Hardness
The mount material and its hardness govern how much engine vibration is transmitted to the chassis. Softer elastomers isolate more vibration for a smoother ride but can wear faster under heavy loads or frequent thermal cycling. Stiffer materials reduce movement under torque and are often used for performance or towing applications, but they can increase noise and harshness inside the cabin.
Understanding the tradeoff between isolation and stiffness helps you choose a mount that matches your driving style and load demands. Look for materials specified for oil and heat resistance to ensure longevity.
Fitment Accuracy
Precise fitment to the Jeep Grand Cherokee mounting points ensures correct engine position and reduces installation complications. A mount engineered to match OEM hole patterns and offsets minimizes the need for modification and maintains factory alignment of the drivetrain. Poor fitment can cause stress on adjacent components, misaligned driveshaft angles, or accelerated wear on associated bushings.
Choose mounts with clear vehicle-specific fit information and documented bolt patterns to avoid time-consuming adjustments.
Load Capacity And Reinforcement
Mounts must withstand the static and dynamic loads produced by the engine and transmission, especially during hard acceleration, towing, or spirited driving. Reinforced designs or mounts with additional metal support can resist deformation and extend service life under higher loads. Consider mounts that specify load tolerances or use reinforced housings if you frequently tow or carry heavy loads.
For standard commuting, less aggressively reinforced mounts may provide better vibration isolation, while heavy-duty options trade some comfort for greater structural resilience.
Durability Under Heat And Contaminants
Engine compartments expose mounts to elevated temperatures, oil, coolant, and road contaminants. Materials and bonding processes that resist heat aging and fluid degradation last longer and maintain isolation properties over time. Failure modes often include cracking, delamination, or hardening, which reduce effectiveness and may lead to sudden failure.
Select mounts rated for automotive under-hood environments and with materials formulated to resist common automotive fluids to reduce premature replacement frequency.
Ease Of Installation
Some mounts are straightforward bolt-on replacements, while others require engine support, alignment, or additional hardware. Ease of installation affects labor time and whether you can perform the replacement at home. Designs that align with factory mounting sequences and include necessary bushings or hardware streamline the process.
Consider whether you have access to lifts, proper engine support tools, or whether professional installation is preferable for the mount you choose.
Noise, Vibration, And Harshness (NVH) Performance
NVH performance describes how well a mount isolates vibration and prevents noise transmission into the cabin. Good NVH performance improves comfort and reduces perceived mechanical issues. Different mount designs prioritize either isolation or rigidity; understanding your tolerance for vibration helps determine the right balance.
If quiet daily driving is a priority, prioritize mounts with proven isolation characteristics. If you prioritize drivetrain control over cabin comfort, a stiffer mount may be more suitable.
FAQ
How do I know when my Jeep Grand Cherokee needs a new engine mount?
Common signs include increased engine vibration felt in the cabin, clunking or knocking during acceleration or shifting, and visible engine movement when revving. Inspection may reveal cracked rubber, separation from metal components, or fluid leakage in hydraulic-style mounts. If you notice these symptoms, a professional inspection can confirm whether the mount or related hardware is the cause.
Can I replace an engine mount myself?
Many owners with mechanical experience and basic tools can replace a mount, but it often requires safely supporting the engine and following proper torque sequences. Some mounts are more accessible than others, and certain replacements benefit from a lift or engine hoist. If you are unsure about alignment or do not have the right tools, seek professional installation.
Do different mounts affect towing or performance?
Yes. Stiffer or reinforced mounts generally handle higher torque and towing loads with less deformation, which can improve drivetrain stability under heavy use. Those mounts often transmit more vibration to the cabin. Softer mounts provide better comfort but may compress more under sustained loads. Choose based on your typical towing and driving habits.
How long do engine mounts typically last?
Service life varies with driving conditions, material quality, and exposure to heat and contaminants. Under normal driving, many mounts last several years, but frequent towing, aggressive driving, or persistent fluid exposure can shorten that lifespan. Regular visual inspections and attention to changing vibration or noise patterns help catch wear early.
Are hydraulic or fluid-filled mounts better than solid rubber ones?
Hydraulic or fluid-damped mounts can provide superior vibration isolation at certain frequencies, improving comfort in everyday driving. Solid rubber mounts tend to be simpler and may offer greater durability under extreme loads. The best choice depends on the balance you want between NVH isolation and load-bearing resilience.
How We Chose the Best Jeep Grand Cherokee Engine Mount
We focused on solutions designed specifically for the Jeep Grand Cherokee platform and evaluated each entry across four to six practical criteria relevant to owners and installers. Primary considerations included material composition and hardness, which determine vibration damping and lifespan; fitment accuracy and OEM compatibility, which affect installation time and drivetrain alignment; load capacity and reinforcement, which matter for towing or performance use; and overall durability under heat, oil exposure, and repeated engine torque cycles. We also considered ease of installation and the availability of replacement components or bushings. Products were excluded if they lacked clear fitment data for the Jeep Grand Cherokee, if they used unspecified materials, or if they were intended only for racing use without street-legal durability. The final list favors mounts that balance comfort and durability while supporting common real-world driving and duty cycles.
Our full evaluation process is outlined in our review methodology.
Conclusion
Choosing the right engine mount for a Jeep Grand Cherokee comes down to balancing vibration isolation, load capacity, and durability. Prioritize accurate fitment and materials that resist heat and fluid exposure to maintain alignment and longevity. Consider your driving habits: daily commuters usually benefit from softer mounts for comfort, while towing or performance use favors stiffer, reinforced designs.
Explore More:
- Check out all Jeep Grand Cherokee parts & accessories
- Explore Engine
- Browse all Auto Parts
