Note: This article contains affiliate links. If you click on these links and make a purchase, I may earn a small commission at no extra cost to you. This helps support my research and content. Read my full affiliate disclaimer here.
Choosing the right ball joint for your Ford Fusion matters because worn or failing joints affect steering feel, tire wear, and overall safety. If you drive regularly, replacing compromised suspension components can restore predictable handling and reduce the risk of further drivetrain wear. This guide highlights seven shortlisted ball joints chosen for their fitment, durability, and installation characteristics. Read on to understand the criteria we used and which features matter most so you can find the best option for your Fusion.
Looking for other parts? See all Ford Fusion parts & accessories.
Top Picks at a Glance
| Best Reviewed A top-rated pick with lots of positive feedback | SCITOO 12‑Piece Front Suspension Kit for Toyota Corolla (2009–2013) |  |
| Most Popular A crowd favorite that many people choose with confidence | TRQ Front Lower Control Arm with Ball Joint Set (2-piece) |  |
| Best Quality Built to a higher standard if you want something more solid | SCITOO 10‑Piece Front Suspension Kit with Lower Control Arms and Tie Rod Ends |  |
| Best Budget The cheapest option that still gets the job done reliably | BOXI Front Inner/Outer Tie Rod and Upper Ball Joint Kit for Ford Fusion |  |
| Most Sold A high-volume bestseller chosen again and again | Detroit Axle Front and Rear Suspension Kit for Ford Fusion (2013–2020) |  |
| Best Value for Money The sweet spot between price and what you get | Weonefit Front Lower Control Arm Pair with Ball Joints for Ford Fusion (2013–2017) |  |
| Best Overall The best all-around choice for most situations | Detroit Axle 10-piece Front End Suspension Kit for Ford Fusion and Lincoln MKZ |  |
1. SCITOO 12‑Piece Front Suspension Kit for Toyota Corolla (2009–2013)
| Fit Type | Vehicle Specific Fit |
|---|---|
| Auto Part Position | Front Left |
| Material | Alloy Steel, Stainless Steel |
| Unit Count | 12.0 Count |
This SCITOO 12‑piece front suspension kit bundles the common front-end wear items for a 2009–2013 Toyota Corolla so you can replace multiple parts in one job. The kit includes both lower control arms, lower ball joints, inner and outer tie rod ends with boots, sway bar end links and related components, all pre-greased and finished with an electrophoretic coating intended to resist corrosion. It is typically used when steering becomes noisy, the ride feels harsh over bumps, or steering control is degraded. The practical benefit is convenience and parts compatibility for a Corolla project: you get matching parts that fit the same vehicle and reduce repeat trips to the parts store. Limitations are that this is a generic aftermarket kit for Toyota Corolla only and not specific to Ford Fusion, and installation should be done by a professional to ensure alignment and safety; some buyers may prefer purchasing individual premium-brand components rather than a bundled kit. The finish and pregreased joints help reduce initial break-in work, but long-term durability will depend on driving conditions and installation quality.
Best for: Buyers who own a 2009–2013 Toyota Corolla and want a single-purchase solution to replace most common front suspension and steering components in one job.
Less Ideal for: Owners seeking parts specifically for Ford Fusion or those who prefer selecting individual high-end brand components should look elsewhere.
- Complete 12‑piece kit includes control arms, ball joints, inner and outer tie rod ends, sway bar links and boots for a single front-end repair.
- Components come pre-greased to simplify installation and reduce initial servicing.
- Electrophoretic coating on parts offers corrosion resistance for longer service life.
- Designed as a vehicle specific fit for 2009–2013 Toyota Corolla to improve likelihood of correct fitment.
- Kit is built for Toyota Corolla models and is not compatible with Ford Fusion.
- Bundle approach can mix parts with different expected lifespans so some items may be replaced earlier than others.
- May require professional installation and alignment to ensure safe steering and suspension performance.
Verdict A convenient, pre-greased 12‑piece front suspension kit well suited to 2009–2013 Toyota Corolla owners but not applicable for Ford Fusion replacements.
2. TRQ Front Lower Control Arm with Ball Joint Set (2-piece)
| Fit Type | Vehicle Specific Fit |
|---|---|
| Auto Part Position | Front |
| Material | Alloy Steel, Aluminum |
| Quantity | 2 Piece |
This TRQ kit replaces both front lower forward control arms and includes ball joints preinstalled, so it functions as a ready-to-install direct-fit replacement for affected Ford Fusion models. Typical use is a suspension refresh when worn arms or failing ball joints cause looseness, uneven tire wear, or steering vagueness. Notable features include machined metal construction, a mix of alloy steel and aluminum for strength and weight savings, and pre-assembled ball joints that cut installation time. In practice the parts align to factory mounting points and let you reuse existing mounting hardware in many cases, which simplifies a DIY job or a shop swap. Buyers report improved front-end stability and smoother steering after installation, though quality control is mixed across units so inspect parts on arrival. A small number of customers experienced damaged or incorrect items shipped, and some have reported premature wear on ball joints under heavy use. Expect straightforward fit for the Ford Fusion applications listed but plan a proper post-installation alignment.
Best for: Ford Fusion owners whose front lower control arms or ball joints are worn and who want a direct-fit, replace‑both solution suitable for DIY or shop installation.
Less Ideal for: Those who need a heavy-duty performance upgrade or extended-longevity, high-mileage commercial application should consider specialty aftermarket options or OEM replacements instead.
- Direct-fit replacement for specified Ford Fusion model years so installation lines up with factory mounts
- Comes as a pair including both driver and passenger lower control arms with preinstalled ball joints to save installation time
- Machined exterior and alloy steel/aluminum construction for robust, factory-style strength
- Large vendor support resources and DIY installation videos to guide repairs
- Some customers report receiving incorrect or damaged parts on arrival indicating occasional quality control or packing errors
- A minority of users experienced early ball-joint failure under high-mileage or heavy-use conditions
Verdict For most Ford Fusion owners needing a straightforward front lower control arm and ball joint replacement, this TRQ two-piece set offers an easy direct-fit swap with preinstalled joints, but inspect parts on delivery and budget for alignment.
3. SCITOO 10‑Piece Front Suspension Kit with Lower Control Arms and Tie Rod Ends
| Fitment | 2013–2020 Ford Fusion |
|---|---|
| Includes | Lower control arms with ball joints, inner/outer tie rod ends, front and rear sway bar end links |
| Materials | Alloy Steel, Aluminum, Cast Iron, Stainless Steel |
| Pre-greased | Yes |
| Auto Part Position | Front |
This SCITOO 10‑piece suspension kit supplies the front lower control arms with integrated ball joints, inner and outer tie rod ends, and front and rear sway bar end links specifically for 2013–2020 Ford Fusion vehicles. It is intended as a one‑stop refresh when multiple front suspension components show wear, and the parts arrive pre‑greased so you can install them without additional zerk lubrication. The kit uses a mix of alloy steel, aluminum, cast iron, and stainless steel to balance strength and corrosion resistance, and painted finishes help protect exposed surfaces. For a Fusion owner, the practical benefit is replacing worn ball joints and tie rods in one job which restores steering feel and reduces noise and harshness over bumps. Expect professional installation for proper alignment and safety. Limitations are that the kit is vehicle specific so fitment must be confirmed for your Fusion year and trim, and the set does not include control arm bushings or additional hardware beyond the listed parts, so you may need extra components during installation.
Best for: Ford Fusion owners who need to replace multiple front suspension components at once and prefer a consolidated kit to minimize parts sourcing and downtime.
Less Ideal for: Drivers who only need a single isolated component replaced or those who prefer OEM factory‑branded parts for warranty or dealer service continuity.
- Complete front suspension coverage for a single repair job including lower control arms with ball joints and tie rod ends
- Parts come pre-greased to reduce prep work before installation
- Materials mix (alloy steel, aluminum, cast iron, stainless steel) aimed at durability and corrosion resistance
- Designed for specific model years so incorrect fitment is possible if year/trim not confirmed
- Does not include every possible wear item or alignment hardware needed for installation
Verdict A convenient, pre‑greased front suspension kit for 2013–2020 Ford Fusion that restores steering and ride quality when multiple components have worn out.
4. BOXI Front Inner/Outer Tie Rod and Upper Ball Joint Kit for Ford Fusion
| Position | Front |
|---|---|
| Manufacturer | ShangHai BOXI Auto Parts Co., Ltd. |
| Brand | BOXI |
| OEM Part Number | ES800102 ES800101 EV800531 K500013 |
This BOXI 6-piece kit supplies front inner and outer tie rod ends plus upper ball joints intended as factory-style replacements for Ford Fusion (2006–2012 V6 3.5L) and closely related Lincoln and Mercury models. It is typically used when worn steering and suspension joints cause play, uneven tire wear, or loose steering feel; installers receive a matched set that lets you replace both sides in one job. Notable features include precision tolerances for straightforward installation and components finished to resist corrosion. In practice the kit gives a cost-effective way to restore steering responsiveness and return alignment to spec when combined with a proper alignment afterward. Limitations are that fitment is specific to the listed vehicles and engine application so you must confirm compatibility before ordering, and this aftermarket kit may not carry the same long-term durability claims as higher-end OE replacement brands. Expect a budget-friendly repair solution that gets a tired front end back to serviceable condition when installed correctly.
Best for: Buyers who need an affordable, all-in-one front steering/suspension repair kit to replace worn tie rods and upper ball joints on a compatible Ford Fusion and want to complete both sides in one visit.
Less Ideal for: Owners seeking a long-term premium OEM-level component or those unsure about exact year/engine fitment should consider higher-end parts or verify exact compatibility before purchasing.
- Complete 6-piece kit covers both front left and right tie rods and upper ball joints for a one-job repair.
- Precision tolerances aimed at easier, more accurate installation.
- Polished finish helps resist corrosion and presents a clean appearance.
- Includes manufacturer part numbers for direct replacement matching.
- Compatibility limited to the specified Ford Fusion/Lincoln/Mercury applications and engine variants.
- May not match the long-term durability of premium factory-quality replacement parts.
Verdict A budget-friendly, complete front tie rod and upper ball joint kit for compatible Ford Fusion models that simplifies a two-side steering repair while requiring fitment confirmation.
5. Detroit Axle Front and Rear Suspension Kit for Ford Fusion (2013–2020)
| Compatible vehicles | 2013–2020 Ford Fusion (FWD) |
|---|---|
| Kit contents | Front struts w/coil springs, rear shock absorbers, front lower control arms w/ball joints, sway bar end links, outer/inner tie rod ends |
| Struts | Complete preassembled strut assemblies |
| Position | Front (kit includes front and rear components) |
This Detroit Axle kit supplies everything needed to replace worn suspension on FWD Ford Fusion models from 2013 through 2020, including complete front strut assemblies with coil springs, rear shock absorbers, front lower control arms with ball joints, tie rod ends, and sway bar end links. It is packaged as a vehicle-specific repair kit so a DIYer or a shop can swap all common wear items in one go, which simplifies alignment and restores steering feel. The strut assemblies arrive ready to install, avoiding spring compressors or special prep, and the manufacturer states the components undergo impact and fatigue testing. Buyers report a firmer, more controlled ride after installation, although some feedback warns of a stiffer feel compared with new OEM suspension. Expect improved front-end tightness and the convenience of matched parts, but be prepared to have the vehicle aligned after fitment and accept a firmer ride characteristic versus softer factory-tuned springs.
Best for: Ford Fusion owners who need a full suspension refresh and want a single kit to replace struts, shocks, control arms and related wear parts in one installation.
Less Ideal for: Drivers who prioritize a plush, factory-soft ride or who prefer OEM-branded suspension components should consider factory-quality replacements instead.
- Complete kit covers front struts with coil springs plus rear shocks and steering/suspension wear items so you can replace the whole system at once
- Strut assemblies come preassembled and ready to install, removing the need for spring compression work
- Vehicle-specific fitment for 2013–2020 Ford Fusion FWD simplifies parts matching and reduces compatibility guesswork
- Includes control arms with ball joints and tie rod ends so alignment shops can perform a proper front-end alignment after installation
- Some users report a noticeably firmer ride compared with factory feel
- Build quality and long-term durability received mixed feedback in user reports
Verdict A convenient, vehicle-specific all-in-one suspension kit that restores front-end tightness for Ford Fusion owners but leans toward a firmer ride than factory feel.
6. Weonefit Front Lower Control Arm Pair with Ball Joints for Ford Fusion (2013–2017)
| Fitment | 2013–2017 Ford Fusion |
|---|---|
| Position | Front Lower |
| Unit Count | 2.0 Count |
| OEM Part Number | K623000 K623001, DG9Z3078B DG9Z3079B |
These Weonefit front lower control arms replace the driver and passenger front lower assemblies on 2013–2017 Ford Fusion models and come with integrated ball joints for a one-piece swap. Designed from high-strength steel tubing with solid mounting plates and a rust-resistant coating, the arms aim to restore proper wheel geometry and reduce road vibration that causes steering wander, clunks, and uneven tire wear. Installation is typical for a lower control arm job: remove the old arms, transfer or replace mounting hardware as needed, and torque to factory specifications. The integrated ball joints simplify installation compared with separate-component kits and reduce the chance of mismatched parts. Expect improved ride comfort and steering feel if your Fusion has worn arms or failing ball joints, though you will still need an alignment after replacement. These are aftermarket factory-replacement style parts so finish, fit, and long-term durability can vary from OEM; professional inspection of mounting points and hardware is recommended during installation.
Best for: Ford Fusion owners (2013–2017) who need a straightforward, budget-conscious replacement for worn lower control arms and ball joints to restore steering and ride quality.
Less Ideal for: Owners seeking a direct OEM-manufactured part or a heavy-duty performance upgrade should consider factory or premium aftermarket options instead.
- Sold as a pair covering both driver and passenger lower arms for a complete front-side replacement.
- Integrated ball joints reduce installation steps and risk of mismatched components.
- Constructed from high-strength steel with plated rust-resistant coating for improved corrosion resistance.
- Designed specifically to replace the factory front lower control arms on 2013–2017 Ford Fusion models.
- Aftermarket part may not match OEM finish or long-term durability exactly.
- Requires wheel alignment after installation to correct suspension geometry.
- Some vehicles may need transfer of original mounting hardware or professional installation for best fit.
Verdict A cost-effective, vehicle-specific pair of front lower control arms with integrated ball joints that restore steering and comfort on 2013–2017 Ford Fusion models.
7. Detroit Axle 10-piece Front End Suspension Kit for Ford Fusion and Lincoln MKZ
| Fitment | 2013-2019 Ford Fusion; 2020 Ford Fusion (2.0L); 2013-2020 Lincoln MKZ |
|---|---|
| Kit contents | 2 lower control arms w/ ball joints, 4 tie rod ends (inner and outer), 4 sway bar end links |
| Manufacturer | Detroit Axle |
| Manufacturer Part Number | 10CS501741 |
This Detroit Axle kit bundles the front lower control arms with integrated ball joints plus inner and outer tie rod ends and front/rear sway bar end links into a single replacement set for Ford Fusion models (including 2020 2.0L). It is intended for a factory-replacement, driveability-focused repair when multiple front-end components are worn. Installation is typical of a front suspension job: remove the old control arms and ends, press or bolt in the new assemblies, and torque to factory spec. The notable conveniences are the direct-fit design for Fusion chassis and the included ball joints already pressed into the lower control arms, which saves time compared with buying individual parts. Materials and reinforced structure aim to resist corrosion and impact, and customer feedback shows many owners get improved ride quality and correct fit. Limitations to consider are occasional reports of dimensional interference—some users noted issues with shock clearance or early ball joint wear—so check fit and inspect mating shock mounts at installation. This kit is best when you want a comprehensive front-end refresh rather than a single-part repair on a Ford Fusion.
Best for: Ford Fusion owners (2013–2020, 2020 2.0L) needing a full front-end suspension refresh who prefer a single, matched kit to replace multiple worn components at once.
Less Ideal for: Drivers who only need one replacement component or who prefer factory dealership parts and service should consider buying individual parts or OEM sources instead.
- Complete kit replaces both lower control arms, inner and outer tie rods, and sway bar end links for a one-stop front-end repair
- Lower control arms include preinstalled ball joints to reduce press-in labor and simplify installation
- Direct-fit design for Ford Fusion models aiming to match factory mounting points and alignment geometry
- Premium alloy construction and reinforced structure intended to resist wear and extend service life
- Some users reported interference between the control arm shock mount and shock body requiring modification or attention during install
- A few reports indicate premature ball joint wear on long-term installs, so longevity may vary
- As a multi-piece kit, replacing only a single failed component may be less cost-efficient than buying that part alone
Verdict A convenient, direct-fit full front suspension kit for Ford Fusion owners who want to replace ball joints and related front-end parts in one job, but inspect shock clearance and accept some variability in long-term durability.
Choosing the Right Ford Fusion Ball Joint: Key Factors to Consider
Fitment and Vehicle Compatibility
Ensuring correct fitment for your Ford Fusion is the first priority because ball joints must match the vehicle's year, trim, and suspension configuration. Even within a single model, differences in front-end design or steering components can require different ball joint types, so verifying compatibility prevents installation issues and potential safety risks.
Knowing whether a part is designed for the Fusion's specific front suspension geometry reduces the chance of premature wear and ensures proper alignment. Fitment information also affects how you plan the replacement, including whether special tools or minor suspension disassembly will be necessary.
Upper Vs Lower Ball Joint Placement
Understanding whether you need an upper ball joint, a lower ball joint, or both helps you choose the right parts and avoid unnecessary purchases. Upper and lower ball joints often experience different loads and wear patterns, so selecting the correct location-specific component matters for durability and handling.
Deciding on the correct placement also influences labor planning. Some vehicles make one position easier to access than the other, which affects installation time and whether you can perform the job at home or should seek professional service.
Construction Quality and Materials
The materials and build quality directly impact longevity and performance. Components made from higher-grade steel, with hardened bearings and corrosion-resistant coatings, generally withstand road stresses better and resist rust in climates that use road salt or experience moisture.
Robust construction also reduces the likelihood of premature failure that can affect steering precision and tire wear. When planning a replacement, consider how construction quality aligns with your driving conditions and expected service life to balance cost and durability.
Greaseability and Sealed Designs
Ball joints are offered as maintenance-free sealed units or as serviceable, greaseable designs. Greaseable units allow periodic lubrication, which can extend service life if you maintain the suspension regularly. Sealed units eliminate the need for maintenance and reduce the chance of contamination but must be replaced when worn.
Choosing between these designs affects long-term ownership costs and maintenance routines. If you prefer low-maintenance parts or cannot access the grease fittings easily, sealed units may be preferable. If you perform routine undercar maintenance, greaseable joints can be a cost-effective choice.
Compatibility with Alignment and Suspension Geometry
A replacement ball joint must maintain proper suspension geometry to preserve correct wheel alignment and handling behavior. Differences in joint height, stud location, or mounting style can alter camber or caster settings, which in turn affect tire wear and steering feel.
Selecting parts designed to match the original equipment geometry reduces the need for additional suspension modifications. After installation, plan for a professional alignment to verify geometry and ensure safe, predictable handling.
Included Hardware and Repair Kit Options
Some ball joint purchases come as a single part, while others are sold as a ball joint kit that includes mounting hardware, bushings, or new control arm fasteners. Kits simplify the repair process by providing all necessary components and reducing the risk of reusing worn or incompatible hardware.
Choosing a kit can save time and ensure a more complete repair, especially if mounting hardware is corroded or single-use. However, evaluate what is included to confirm it matches your Fusion's needs and to avoid buying duplicate items you do not require.
FAQ
How do I know if a Ford Fusion ball joint needs replacing?
Common signs include unusual clunking or popping from the front suspension, uneven tire wear, steering that feels loose or wanders, and vibration at low speeds. A visual inspection may show torn dust boots or excessive movement when the wheel is lifted and the joint is manipulated. Because symptoms can overlap with other suspension issues, a mechanic often confirms diagnosis with a hands-on check.
Should I replace upper ball joints, lower ball joints, or both on my Ford Fusion?
Which joints to replace depends on where wear is present. Often one side or one position shows more wear, but mechanics sometimes recommend replacing both joints on the same axle for balanced handling and even wear. The decision usually depends on inspection findings, vehicle age, and overall suspension condition.
What is included in a ball joint kit for a Ford Fusion and when is it useful?
A ball joint kit typically includes the ball joint itself plus hardware such as nuts, cotter pins, and sometimes a grease fitting or mounting bolts. Kits are useful when the original fasteners are corroded or worn, or when you want all necessary parts for a complete, reliable installation. Using a kit can simplify the repair and reduce the chance of missing components.
Can I do a ball joint replacement on a Ford Fusion myself?
A DIY replacement is possible for someone with intermediate mechanical skills and the right tools, such as a ball joint press, jack stands, and torque wrench. The job requires safe vehicle support and correct torque on suspension fasteners. If you lack tools or experience, professional installation reduces risk and ensures alignment is maintained.
How long do ball joints typically last on a Ford Fusion?
Ball joint lifespan varies with driving conditions, mileage, and maintenance. They often last many tens of thousands of miles under normal use but may wear faster with frequent rough-road driving or exposure to corrosion. Regular inspections during service intervals help catch wear early and avoid secondary suspension damage.
Will replacing ball joints affect wheel alignment on my Ford Fusion?
Replacing ball joints can change suspension geometry enough to affect alignment, especially if control arm bushings are also worn or if ball joints were heavily worn. It is common practice to check and, if necessary, correct alignment after ball joint service to ensure even tire wear and predictable handling.
How We Chose the Best Ford Fusion Ball Joint
To create this list we focused on criteria that directly affect real-world performance and long-term reliability in a Ford Fusion. Primary filters included correct vehicle fitment and model-year coverage to ensure safe compatibility, construction materials and corrosion protection to assess durability in varied climates, and ball joint design and sealing to evaluate dust and moisture resistance. We also prioritized ease of installation and whether the part supports standard replacement procedures without extensive alignment work. Additional considerations were warranty coverage and user feedback on longevity. Items were excluded if they lacked clear Ford Fusion fitment information, used ambiguous materials specifications, or required extensive vehicle modification for installation. The final selection balances fitment confidence, build quality, and installation practicality for typical Fusion owners.
Our full evaluation process is outlined in our review methodology.
Conclusion
When choosing a Ford Fusion ball joint, prioritize correct fitment for your model year, durable construction, and a sealing or lubrication design that matches your maintenance preferences. Factor in installation complexity and whether the joint is position-specific to avoid unnecessary labor. Balancing these considerations will help you restore steering precision and suspension stability while minimizing future service needs.
Explore More:
- Check out all Ford Fusion parts & accessories
- Explore Suspension & Steering
- Browse all Auto Parts
