Note: This article contains affiliate links. If you click on these links and make a purchase, I may earn a small commission at no extra cost to you. This helps support my research and content. Read my full affiliate disclosure here.
If you drive a GMC Yukon, the oil filter housing is a small part that affects engine cleanliness and leak-free operation. Choosing the right housing matters because a failing unit can cause oil loss, contamination, or engine damage, while a well-made replacement restores secure sealing and simple maintenance.This guide presents seven shortlisted oil filter housings for the GMC Yukon that meet our durability and sealing standards. We evaluated each option for fitment accuracy, build materials, and resistance to common failure modes to help you pick a serviceable, long-term solution.
Looking for other parts? See all GMC Yukon parts & accessories.
Top Picks at a Glance
| Best Reviewed A top-rated pick with lots of positive feedback | MAHLE Original GS33747 Engine Oil Filter Housing Seal Kit |  |
| Most Popular A crowd favorite that many people choose with confidence | Somusen Aluminum Engine Oil Filter Housing Kit with Oil Cooler and Sensors |  |
| Best Quality Built to a higher standard if you want something more solid | APSG Genuine Toyota Oil Filter Housing Cap Kit with Wrench and Crush Washer |  |
| Best Budget The cheapest option that still gets the job done reliably | MOTOKU Engine Oil Filter with Housing Gasket, Bolts & Oil Cooler Seal Set |  |
| Most Sold A high-volume bestseller chosen again and again | YITHSWAY Aluminum Engine Oil Cooler and Filter Housing Adapter (3.6L) |  |
| Best Value for Money The sweet spot between price and what you get | MILIPARTS Aluminum Oil Cooler and Filter Housing Kit |  |
| Best Overall The best all-around choice for most situations | MNJWS Aluminum Oil Filter Housing and Cooler Kit (3.6L Pentastar fitment) |  |
1. MAHLE Original GS33747 Engine Oil Filter Housing Seal Kit
| Brand | MAHLE |
|---|---|
| Model | GS33747 |
| Material | Oe Equivalent |
| Exterior | Machined |
This MAHLE GS33747 seal kit supplies the seals needed to reseal an engine oil filter housing and stop external oil leaks. It is used when replacing a leaking filter housing on engines that share this housing design and is packaged to confirm you have the correct parts before installation. The kit uses OE-equivalent materials and is engineered to meet original-spec sealing performance, which translates to a reliable, long-lasting repair when installed correctly. Buyers should expect a snug, accurate fit and improved leak control compared with worn factory seals. Installation can be involved on some engines and requires proper bolt torques and attention to intake or nearby components during reassembly, so plan time or professional installation if you are not comfortable with detailed engine work. The product does not include detailed fitment instructions for specific trucks so confirm compatibility with your Yukon before purchasing.
Best for: Reliability-focused buyers who prioritize a factory-quality replacement to stop persistent oil leaks and want a durable fix rather than a short-term patch.
Less Ideal for: Drivers seeking a plug-and-play universal part or a DIYer who prefers very simple, quick installations without engine disassembly should consider alternatives or professional help.
- OE-equivalent materials for reliable sealing
- Packaged in a shrink-wrapped tray to ensure correct contents before opening
- Consistent fit reported by users, reducing oil leaks when installed properly
- Installation can be complicated and may require loosening nearby components and correct torque sequence
- Product listing does not include vehicle-specific installation guidance
Verdict A factory-quality replacement seal kit that restores reliable oil-filter-housing sealing but requires careful installation to get the expected longevity.
2. Somusen Aluminum Engine Oil Filter Housing Kit with Oil Cooler and Sensors
| Brand | Somusen |
|---|---|
| Material | Aluminum |
| Thread Size | M16 x 1.5 |
| Automotive Fit Type | Vehicle Specific Fit |
This Somusen kit replaces the common plastic oil filter housing with a single-piece aluminum unit that includes the oil cooler, oil filter and basic sensors. It is intended for direct replacement in compatible vehicles and is typically used when the factory housing cracks or leaks; installation involves draining oil and coolant, swapping gaskets and sensors, and bleeding the cooling system. Notable features include an aluminum construction and a multi-plate oil cooler intended to improve oil cooling compared with plastic housings, plus included gaskets and an oil filter to simplify the repair. In practice the aluminum body reduces the risk of future cracking and coolant/oil cross-contamination, and the integrated cooler can help keep oil temperatures lower under load. Limitations: several buyers reported poor-quality supplied sensors and gaskets and had to fit OEM-quality seals or sensors to clear error codes or stop leaks. Installation can be tedious and may require extra parts and diagnostic checks after fitment to ensure sensor compatibility.
Best for: A convenience-driven buyer who wants a single replacement kit that combines the housing, cooler and filter to minimize separate parts sourcing and simplify the repair process.
Less Ideal for: Owners who prefer a fully factory-spec solution or who cannot tolerate any post-install sensor tuning should consider a factory-quality alternative or professional installation.
- All-aluminum housing reduces risk of cracking compared with factory plastic units
- Includes oil cooler and oil filter so several service items are consolidated into one replacement
- Vehicle-specific design aims for direct bolt-in fit to supported models
- Multi-layer cooler plate design intended to improve oil cooling under load
- Included sensors and gaskets have mixed quality and some buyers needed OEM replacements to avoid error codes
- Not guaranteed to work seamlessly with vehicle sensors without swapping to factory-spec parts
Verdict A cost-effective aluminum upgrade that consolidates the housing, cooler and filter into one unit but often requires OEM-quality sensors or gaskets to ensure trouble-free operation.
3. APSG Genuine Toyota Oil Filter Housing Cap Kit with Wrench and Crush Washer
| Brand | APSG |
|---|---|
| Material | Metal,Plastic |
| Thread Size | M16 x 1.5 |
| Automotive Fit Type | Vehicle Specific Fit |
This kit replaces a plastic oil filter housing cap with a metal housing cap and supplies a matching cap wrench plus a drain plug crush washer. It is typically used during an oil service to swap the original housing cap and prevent the common cracking and leaks associated with plastic caps. The aluminum housing offers greater resistance to impact and heat, and the included wrench is shaped to engage the cap securely, making cap removal and reinstallation easier and more reliable. Buyers will appreciate that the kit is a direct replacement assembly designed for vehicle-specific fitment and that it comes with the small hardware needed to finish an oil change. Limitations to note are that some installations may require swapping or shortening an internal tube or using a different length oil filter depending on vehicle application, and this is a cap kit rather than a full filter element set, so you still need a compatible oil filter and proper torque during installation.
Best for: Performance-oriented buyers who prioritize durable, factory-quality upgrades and want a longer-lasting alternative to plastic housing caps for regular maintenance and spirited driving.
Less Ideal for: If you want a complete filter change kit that includes the filter element or need a universal fit solution for multiple vehicles, this vehicle-specific cap kit is not the best choice.
- Metal housing cap reduces risk of cracking compared with factory plastic caps
- Included APSG cap wrench fits the housing and simplifies removal and installation
- Comes with crush washer so drain plug sealing is addressed during the service
- Direct-fit replacement intended for specific vehicle applications
- May require swapping or modifying the internal metal tube or selecting a different length filter on some vehicles
- Kit does not include the replaceable oil filter element itself
Verdict A durable metal housing cap kit that replaces fragile plastic covers and includes the wrench and crush washer needed for reliable oil service.
4. MOTOKU Engine Oil Filter with Housing Gasket, Bolts & Oil Cooler Seal Set
| Brand | MOTOKU |
|---|---|
| Product Grade | Replacement Part |
| Thread Size | M16 x 1.5 |
| Automotive Fit Type | Vehicle Specific Fit |
This MOTOKU kit bundles an engine oil filter with the housing gasket, mounting bolts and oil cooler seal to provide a one-stop replacement for routine oil service. In practice the kit is used during an oil change to replace the cartridge and refresh the sealing surfaces around the filter housing and oil cooler, reducing the chance of leaks after installation. The listing emphasizes vehicle-specific fit and lists multiple BMW part numbers that it replaces, which makes it straightforward for someone matching parts. The practical benefit is convenience since you get the filter plus the common soft parts that often need replacement at the same time. On the downside the kit is framed for BMW applications and there is limited information about materials or testing, so long-term durability and exact fitment for non-listed vehicles are not documented. Expect a no-frills, cost-focused replacement option best suited to routine maintenance rather than performance or extended service intervals.
Best for: Budget-conscious owners who prioritize low-cost, complete maintenance kits for routine oil changes and prefer buying a set that includes seals and hardware to avoid extra trips for parts.
Less Ideal for: Owners seeking verified compatibility with GMC Yukon or those who need factory-certified or performance-grade filters should look for parts specified for their vehicle.
- Includes filter plus housing gasket, mounting bolts and oil cooler seal for a single service procedure
- Vehicle-specific listing that replaces multiple BMW part numbers to simplify parts matching
- Affordable, complete kit reduces the chance of missed seals or bolts during an oil change
- Documented fitment covers BMW models only and does not list GMC Yukon compatibility
- Manufacturer materials and testing data are not provided, so long-term reliability is uncertain
Verdict A low-cost, all-in-one filter and seal kit aimed at routine maintenance, but it is designed for BMW applications and is not documented for GMC Yukon fitment.
5. YITHSWAY Aluminum Engine Oil Cooler and Filter Housing Adapter (3.6L)
| Material | Aluminum |
|---|---|
| Thread Size | M16 x 1.5 |
| Manufacturer Part Number | 68105583AF |
| Vehicle Service Type | Car |
This aluminum engine oil cooler and filter housing assembly replaces the fragile plastic housing commonly used on 3.6L V6 engines. It combines the cooler, filter housing, oil filter and sensors into a ready-to-install kit with gaskets, O-rings and mounting hardware included, so it is typically used during a coolant/oil service or when a leaking housing needs replacement. The machined aluminum body resists heat and corrosion better than plastic and should reduce the chance of recurring cracks or leaks. Included pressure and temperature sensors and a fresh oil filter simplify installation and get the vehicle back on the road without hunting for additional parts. Important limitations are fitment and verification: this aftermarket part references compatibility with a wide range of domestic models using the 3.6L Pentastar family but you must confirm factory part numbers and sensor connectors for a specific GMC Yukon application before buying. Also aftermarket fit and long-term durability can vary from factory-quality parts even if many users report good results.
Best for: Risk-averse mainstream buyers who prioritize preventing repeat oil leaks and want a heavier duty, drop-in replacement to reduce future maintenance hassles.
Less Ideal for: Buyers seeking an exact factory-sourced OEM replacement or those unwilling to verify part numbers and sensor connector compatibility for their specific Yukon model should consider other options.
- Machined aluminum construction reduces warping and corrosion compared with plastic housings
- Comes as a complete kit with oil filter, sensors, gaskets, O-rings and mounting bolts for straightforward replacement
- Designed for 3.6L V6 engine families where plastic housings commonly fail
- Includes machined exterior and factory-replacement style components to simplify installation
- Aftermarket fit may require verification of connector types and factory part numbers for a GMC Yukon
- Long-term durability versus a factory-quality unit depends on installation torque and cooling system condition
Verdict A practical aluminum upgrade for 3.6L oil filter housings that cuts the risk of repeat leaks but requires confirming fitment for your Yukon.
6. MILIPARTS Aluminum Oil Cooler and Filter Housing Kit
| Manufacturer | MILIPARTS |
|---|---|
| Model | Oil Cooler |
| Exterior | Aluminum |
| Position | Inside |
This MILIPARTS kit replaces the factory-style oil cooler and filter housing with an aluminum assembly designed to reduce warping and improve oil cooling. It is typically used when the original plastic housing cracks or leaks; the kit includes the cooler, gaskets, and sensors to reinstall as a direct replacement. The aluminum construction adds stiffness and extra cooling passages which help keep oil temperatures lower and reduce the risk of recurring leaks caused by heat-related deformation. Buyers report the housing fits like the factory part and can be installed with basic mechanical skills in a home garage. Important limitations are the included seals, which several users found lower quality than OEM and prone to improper seating under pressure, so sourcing stronger replacement O-rings is a wise precaution. Also the part is listed primarily for Chrysler/Dodge/Jeep applications, so confirm vehicle compatibility for GMC Yukon before ordering.
Best for: Practical optimizers who prioritize reliable, longer-lasting repairs and want a cost-effective upgrade over plastic housings to avoid repeated failures and shop visits.
Less Ideal for: Buyers who prefer guaranteed direct fitment for GMC Yukon without cross-referencing part numbers or those who want every seal sourced from the factory parts department should consider OEM-specific options instead.
- Aluminum housing resists warping and improves cooling efficiency compared with plastic assemblies
- Includes oil cooler, gaskets and sensors for a complete replacement installation
- Multiple cooling passages and fins increase heat dissipation for engine oil
- Reports of solid fitment and OEM-quality performance in compatible applications
- Factory-supplied seals have inconsistent quality and may require replacement to prevent leaks
- Catalog fitment targets Chrysler/Dodge/Jeep engines so fit for GMC Yukon must be verified before purchase
Verdict A budget-friendly aluminum upgrade that improves cooling and durability but plan to replace or double-check the included seals and confirm fitment for GMC Yukon before buying.
7. MNJWS Aluminum Oil Filter Housing and Cooler Kit (3.6L Pentastar fitment)
| Material | Aluminum |
|---|---|
| Thread Size | M16 x 1.5 |
| Vehicle Service Type | 3.6L Pentastar-equipped Chrysler/ Dodge/ Jeep/ Ram models |
| Number of Items | 1 |
This MNJWS kit replaces the plastic oil filter housing and integrated oil cooler used on many 3.6L Pentastar engines with a reinforced aluminum assembly. It is supplied as a complete housing kit with gaskets, bolts, and often includes senders and an oil filter so you can swap the unit in one job. The aluminum construction resists warping from heat and should hold up better than the factory plastic housings that commonly develop leaks. Typical use is a direct replacement during repair of an oil leak or as a preventative upgrade where owners want a longer-lived housing. Users report solid fitment, included hardware, and straightforward installation, though some have found an included sensor or the supplied oil filter incompatible and had to reuse their factory sensor or install a different filter. If you plan to have a shop install the part, check sensor fitment first because a noncompatible sender can require extra expense. The kit offers good value versus dealer parts but requires a bit of caution on sensor and filter compatibility.
Best for: Balanced buyers who want a durable, longer-lasting replacement for the common plastic oil filter housing problem and prefer a cost-effective upgrade that they can install or have installed by a trusted mechanic.
Less Ideal for: Buyers who need guaranteed sensor compatibility from the manufacturer or who prefer dealer-sourced replacement parts with full dealership-fit guarantees should consider alternatives.
- Reinforced aluminum construction resists heat and warping compared with factory plastic housings.
- Includes gasket hardware and often an oil filter so it arrives ready for installation.
- Direct-replacement design for 3.6L Pentastar engines simplifies DIY or shop installs.
- Many users report it stops leaks and fits without modification.
- Some supplied sensors or the included oil filter may not match vehicle originals and might need to be replaced.
- Not a factory-brand part so fitment can vary slightly between production runs and require verification before installation.
Verdict A durable, cost-effective aluminum upgrade for 3.6L Pentastar oil filter housings that solves common leak and heat problems but requires checking sensor and filter compatibility before installation.
Choosing the Right GMC Yukon Oil Filter Housing: Key Factors to Consider
Fitment and Bolt Pattern
Correct fitment is essential because the housing must align precisely with the engine block, oil filter thread, and any sensor or breather ports. A housing that matches factory bolt patterns minimizes installation time and avoids stress that can lead to leaks or warping.
When fitment is precise, gasket compression is uniform and sealing surfaces mate as intended. Poor fitment can force tradeoffs during installation, such as over-tightening or using extra sealant, both of which can mask underlying alignment problems and result in premature failure.
Material Strength and Heat Resistance
The housing material must withstand thermal cycling, vibration, and exposure to oil without cracking. Common materials include aluminum and reinforced composites; each has different strengths in heat transfer and resilience. A material that resists deformation helps maintain sealing surface integrity over time.
Consider how the choice of material interacts with your vehicle's operating conditions. Frequent towing, heavy loads, or extended idling raises under-hood temperatures and can accelerate degradation of weaker materials, so choose a housing rated for those stressors.
Gasket and Seal Design
The effectiveness of the gasket or O-ring determines whether the housing will keep oil contained under pressure and temperature changes. Look for housings that provide proper groove geometry, high-quality elastomer materials, and redundancy where possible to reduce the chance of a single-point failure.
A good seal design also accommodates repeated removal and installation during maintenance without losing compressive properties. This reduces the likelihood of oil seepage after filter changes or servicing.
Resistance to Cracking and Fatigue
Cracking is a common failure mode for oil filter housings, often driven by vibration, thermal stress, or impact. Housings with reinforced walls or stress-relief features are less likely to develop hairline fractures that lead to leaks. Manufacturing quality and proper material selection both influence fatigue life.
Inspecting for design features that reduce stress concentrations, such as filleted corners and thicker ribbing around bolt holes, improves long-term reliability. A housing that resists cracking reduces the frequency of unscheduled repairs and oil loss.
Port and Valve Integrity
Many housings include auxiliary ports, bypass valves, or sensor fittings that must maintain pressure integrity. These components are potential leak points if their seats or threads are poorly machined. Reliable valve assembly and well-machined ports prevent oil seepage and maintain correct oil routing.
Consider housings with robust port reinforcement and clear instructions for torque on sensor fittings. Properly seated valves also protect engine oil pressure and filtration performance.
Serviceability and Parts Availability
Ease of service matters because the housing will be accessed during routine oil changes and occasional gasket replacement. A design that allows straightforward access to the filter, seals, and mounting hardware reduces labor time and the risk of damage during maintenance. Replaceable seals and widely available part numbers are practical benefits.
Choose a housing with clear replacement part references and straightforward installation steps. This makes future maintenance simpler and reduces the chance of using improper seals or incorrect torque values.
FAQ
What are common symptoms of a failing oil filter housing on a GMC Yukon?
Common signs include visible oil seepage around the housing, low oil pressure warnings, or an oil smell in the engine bay. You might also notice oil accumulating beneath the vehicle after it has been parked. Often symptoms develop gradually, so periodic visual inspection helps catch issues early.
Can I replace the oil filter housing myself?
Many owners can perform the replacement with basic mechanical skills and proper tools. The task typically involves draining some oil, removing mounting bolts, and transferring sensors and hoses carefully. Follow torque specifications and use the correct gasket or O-ring to ensure a reliable seal.
How important is it to use the correct gasket or seal?
Using the correct gasket or seal is critical because it ensures proper compression and long-term sealing under pressure and heat. An incorrect or degraded seal often leads to leaks even if the housing itself is fine. Replace seals whenever the housing is removed and confirm the material matches the operating conditions.
What causes oil filter housing cracking?
Cracking often results from repeated thermal cycling, mechanical stress from misalignment, or impact damage. Materials that are too thin or designs with stress concentrations are more prone to fatigue cracks. Regular inspection and choosing a housing with reinforced features can reduce this risk.
How do I find the correct part number for my GMC Yukon oil filter housing?
The correct part number depends on your vehicle year and engine configuration, and it is usually listed in manufacturer parts catalogs or service manuals. Check your vehicle identification details and cross-reference official part lists to ensure the housing matches mounting points, ports, and sensor fittings.
How We Chose the Best GMC Yukon Oil Filter Housing
We focused on components specifically intended for the GMC Yukon and evaluated candidates across multiple practical dimensions. Key criteria included fitment accuracy to factory mounting points and bolt patterns, material durability and resistance to cracking under heat cycling, and the quality of sealing interfaces such as gasket and O-ring design. We also considered valve and port integrity to reduce the risk of leaks and the ease of installation for routine maintenance.Additional filters included compatibility with standard oil filter sizes used on the GMC Yukon, resistance to common failure symptoms like oil seepage or pressure loss, and manufacturer support for replacement seals or part numbers. We excluded units that did not provide clear fitment data, lacked reinforced sealing features, or showed reports of early cracking or repeated leak issues. The resulting selections balance reliable sealing, correct fit, and serviceability for GMC Yukon owners.
Our full evaluation process is outlined in our review methodology.
Conclusion
Prioritize fitment accuracy, durable materials, and reliable sealing when choosing a GMC Yukon oil filter housing. Those attributes reduce the chance of leaks, cracking, and repeated repairs while making routine maintenance easier.Balance tradeoffs between material types and serviceability based on how you use the vehicle. If you regularly tow or operate in demanding conditions, favor housings with reinforced construction and robust seal designs to extend service life.
Explore More:
- Check out all GMC Yukon parts & accessories
- Explore Oil Filter Housings Maintenance & Repair Guides
- Explore Engine
- Browse all Auto Parts
