Note: This article contains affiliate links. If you click on these links and make a purchase, I may earn a small commission at no extra cost to you. This helps support my research and content. Read my full affiliate disclaimer here.
Replacing a worn or damaged engine mount can markedly improve ride comfort, reduce vibration, and protect drivetrain components in your Dodge Dakota. Choosing the right mount matters because fitment, material construction, and vibration isolation determine how well the mount controls engine movement under torque and road inputs. This guide covers the top shortlisted engine mounts for the Dodge Dakota and explains the evaluation criteria used to pick them, including fitment accuracy and vibration performance. Read on to understand what to look for before you replace a mount.
Looking for other parts? See all Dodge Dakota parts & accessories.
Top Picks at a Glance
| Best Reviewed A top-rated pick with lots of positive feedback | a-partrix Engine Mounts Kit — Front Left and Right for Dodge B150/B250 and Dakota |  |
| Best Quality Built to a higher standard if you want something more solid | Advance Ignition Front Left & Right Engine Motor Mount Set (2 PCS) for 2005-2011 Dodge Dakota 4.7L RWD |  |
| Most Sold A high-volume bestseller chosen again and again | A-Premium 3‑Piece Engine and Transmission Mount Kit for Dodge Ram 2500/3500 5.9L |  |
| Best Value for Money The sweet spot between price and what you get | A-Premium Front Left and Right Engine Motor Mount Kit for Dodge Dakota 4.7L |  |
| Best Overall The best all-around choice for most situations | ONNURI Front Left & Right Engine Motor Mount Set for 2005–2006 Dodge Dakota 4.7L |  |
1. a-partrix Engine Mounts Kit — Front Left and Right for Dodge B150/B250 and Dakota
| Fitment | Dodge B150 1992-1993, B250 1992-1993, Dakota 1987-1996 |
|---|---|
| Quantity | 2 front mounts |
| Material | Steel |
| Exterior | Painted |
This two-piece front engine mount kit from a-partrix replaces the left and right engine mounts on select Dodge B150, B250, and Dakota models. It is typically used when worn mounts cause excessive engine movement, vibration, or drivetrain noise; both sides are swapped in a single service to restore engine stability. The mounts are steel with painted finishes and ship as a matched pair so alignment and mounting points match factory locations for a direct replacement fit. For a reliability-focused buyer the key benefit is restoring firm engine positioning and reducing vibration transmitted to the chassis, which helps prolong drivetrain components and improves ride comfort. Limitations include the basic painted finish rather than premium corrosion-resistant coatings and the listing does not provide extended fitment hardware or detailed torque specs, so professional installation or reference to factory service info is recommended.
Best for: Reliability-focused owners who prioritize restoring factory-level engine stability and reducing vibration in older Dodge Dakotas and related B-series vans.
Less Ideal for: Buyers seeking premium anti-corrosion finishes or those who want a mount kit that includes extra installation hardware or detailed service specifications.
- Sold as a matched left and right pair for simultaneous replacement and consistent alignment
- Steel construction provides sturdy support compared with aged rubber mounts
- Direct-fit design for the listed Dodge B150, B250, and Dakota model years simplifies installation
- Finish is painted rather than a higher-grade corrosion-resistant coating
- Product listing lacks detailed installation torque specs or hardware details
Verdict A straightforward, matched pair of steel front engine mounts that restore engine stability on older Dodge Dakota and B-series vans for buyers focused on reliable, factory-style replacement.
2. Advance Ignition Front Left & Right Engine Motor Mount Set (2 PCS) for 2005-2011 Dodge Dakota 4.7L RWD
| Part Number | TC-M5001 |
|---|---|
| Package Quantity | 2 |
| UPC | 664213947165 |
This Advance Ignition two-piece front motor mount set replaces the left and right front mounts on 2005–2011 Dodge Dakota 4.7L RWD models. It is used to secure the engine, absorb torque, and dampen vibration that would otherwise transfer to the chassis and driveline. The mounts are manufactured and tested to meet factory-spec performance and are promoted as durable through lab and fitment testing. In real-world use they should restore proper engine alignment and reduce the excessive movement that causes driveline strain and premature wear of transmission mounts or universal joints. Installation is a direct replacement for the specified applications and comes as a matched left/right pair to simplify service. Limitations include dependence on correct fitment for RWD 4.7L Dakotas only and the usual need for proper torque and alignment during installation to avoid premature failure. Expect solid, factory-quality performance when these mounts are installed correctly, but plan on professional installation if you are not experienced with engine-support work.
Best for: Performance-oriented Dakota owners who prioritize restoring firm engine placement and minimizing vibration to protect the drivetrain and maintain throttle response.
Less Ideal for: Buyers seeking universal or multi-vehicle mounts or those looking for mounts designed for heavy off-road or racing abuse should consider specialized alternatives.
- Sold as a matched left and right front mount pair for coordinated replacement
- Manufactured and tested to meet factory-spec performance for drivetrain load control
- Direct-fit compatibility with 2005–2011 Dodge Dakota 4.7L RWD models simplifies installation
- Designed to reduce engine vibration and limit torque-induced movement that stresses driveline components
- Compatibility limited to specific RWD 4.7L Dakota and a few related models
- May require professional installation or alignment to ensure longevity
Verdict A factory-quality matched front mount pair that restores engine stability and reduces vibration for 2005–2011 Dodge Dakota 4.7L RWD models when installed properly.
3. A-Premium 3‑Piece Engine and Transmission Mount Kit for Dodge Ram 2500/3500 5.9L
| Set contents | Front left motor mount, front right motor mount, transmission mount |
|---|---|
| Vehicle fitment | Dodge Ram 2500 2005–2008, Ram 3500 2005–2007 with 5.9L L6 |
| Reference numbers | A5410, A5478 and listed OEM part numbers |
| Model number | APEM1003 |
This kit supplies a front left motor mount, a front right motor mount, and a transmission mount designed to fit Dodge Ram 2500 (2005–2008) and Ram 3500 (2005–2007) with the 5.9L inline-six and G56 transmission or aluminum transmission case where specified. It is used to restore proper engine alignment and reduce vibration after worn mounts cause excessive movement or noise. The listing emphasizes rigorous testing and materials intended to meet factory-spec performance, and customer feedback indicates reliable fit and quality similar to OEM units. Practical benefits include replacing all three primary mounts in one purchase to simplify installation and get the truck back to smooth idling and stable shifting. Limitations are that fitment is specific to the listed Ram model years and engine/transmission combinations, and buyers should confirm compatibility with their exact transmission case; the kit carries a one-year unlimited-mileage guarantee but long-term durability compared with higher-end OEM replacements may vary depending on driving conditions.
Best for: Buyers who prioritize minimizing installation hassle and want a risk-averse, factory-replacement style solution for repairing engine movement and vibration on compatible Dodge Ram 2500/3500 trucks.
Less Ideal for: Owners seeking a long-term high-end or performance mount upgrade or those with different Ram years or transmission variants should look for a part specifically matched to their vehicle or a performance-oriented option.
- Three-piece kit replaces both front motor mounts and the transmission mount in one purchase for convenience
- Advertised to meet or exceed factory-spec standards and undergoes durability testing
- Multiple customer reviews report good fitment and build quality comparable to factory parts
- Compatibility is limited to the specified Dodge Ram 2500/3500 model years and 5.9L/G56 transmission combination
- One-year unlimited-mileage guarantee is shorter than some extended warranties offered by other brands
Verdict A convenient, risk-averse three-piece replacement kit for compatible Ram 2500/3500 trucks that aims to restore factory-like engine stability without buying individual mounts.
4. A-Premium Front Left and Right Engine Motor Mount Kit for Dodge Dakota 4.7L
| Fitment | Dodge Dakota 2005-2010 4.7L |
|---|---|
| Package contents | Front Left Mount (A5709) and Front Right Mount (A5708) |
| Manufacturer | PremiumpartsWhosale |
| Manufacturer Part Number | APEM999 |
This A-Premium kit includes the front left and right engine mounts specified for 4.7L Dodge Dakota engines and installs in the factory front positions to replace worn mounts. Typical use is as a direct replacement during routine drivability repairs when vibration, engine movement, or transmission misalignment appears. The mounts claim to be tested to factory-spec standards and come with matching reference numbers for straightforward fitment, which helps simplify selection and installation. In practice the kit brings back firmer engine support and reduces the low-frequency shake and clunking common with failed mounts. Downsides are that the listing provides limited manufacturer detail beyond part numbers and the kit relies on basic hardware—professional installation is recommended to ensure torque and alignment. The seller warranty is standard and helpful, but buyers seeking premium isolation materials or performance-tuned mounts should consider higher-end options.
Best for: Practical buyers who want a straightforward, cost-conscious repair that restores factory engine support and reduces vibration without upgrading to specialty mounts.
Less Ideal for: Drivers looking for performance or noise-isolation upgrades, or those who prioritize premium materials over value should consider specialty or heavy-duty mounts instead.
- Sold as a matched left and right pair for front engine support, simplifying replacement
- Specifically listed for Dodge Dakota 4.7L fitment which reduces guesswork when ordering
- Claims factory-spec testing and quality control to restore original engine stability
- Includes commonly referenced OEM part numbers for easier verification with repair guides
- Limited technical detail about materials and damping characteristics in the listing
- Requires proper installation and torqueing, so DIYers without tools may need a shop
Verdict A budget-friendly, matched front mount pair that restores engine stability on 4.7L Dodge Dakotas without unnecessary complexity.
5. ONNURI Front Left & Right Engine Motor Mount Set for 2005–2006 Dodge Dakota 4.7L
| Fitment | 2005-2006 Dodge Dakota 4.7L |
|---|---|
| Kit contents | 2 Motor Mounts |
| Interchange numbers | A5709, A5708 |
| Part numbers | 3417, 3416, 52013267AC, 52013266AC |
This ONNURI kit includes the front left and right motor mounts engineered to replace the factory pieces on a 2005–2006 Dodge Dakota 4.7L. Installed between the engine and subframe, the steel-and-rubber mounts isolate vibration and hold the engine in proper alignment for daily driving and towing within the truck's normal duties. The parts are listed with common interchange numbers so they match factory attachment points and mounting geometry, which simplifies bolt-on replacement and reduces installation headaches. The rubber sections provide noise and vibration damping for a quieter ride compared with worn mounts, while the steel components deliver the rigidity needed to control engine movement. Limitations to consider are that these are direct replacement mounts rather than performance or heavy-duty upgrades, and long-term durability depends on installation and operating conditions. The kit is practical for restoring factory fit and ride feel without modification, but buyers looking for reinforced or performance mounts should look elsewhere.
Best for: A balanced all-round buyer who wants a straightforward, factory-compatible replacement to restore ride comfort and engine alignment on a 2005–2006 Dodge Dakota 4.7L without specialty upgrades.
Less Ideal for: Drivers seeking reinforced, performance, or heavy-duty mounts for modified engines or commercial towing should consider purpose-built alternatives.
- Includes both left and right front motor mounts for a complete front-end replacement
- Steel-and-rubber construction balances rigidity and vibration isolation
- Matches common interchange numbers for straightforward bolt-on fitment
- Designed to restore factory mounting geometry and reduce engine movement/noise
- Not designed as a heavy-duty or performance upgrade for high-power or heavily modified engines
- Durability can vary with driving conditions and quality of installation
Verdict A straightforward, factory-compatible front motor mount kit that restores ride comfort and engine positioning on a 2005–2006 Dodge Dakota 4.7L without specialty upgrades.
Choosing the Right Dodge Dakota Engine Mount: Key Factors to Consider
Fitment and Compatibility
Accurate fitment matters because engine mounts must align with the trucks factory mounting points and bolt patterns to secure the engine properly. A mount that does not match the Dodge Dakotas specific locations can cause misalignment, added stress on brackets, and premature wear.
When evaluating compatibility, check the mounting orientation and hardware interface. Properly fitting mounts minimize installation adjustments and ensure the engine sits at the intended angle, which affects driveline alignment and vibration characteristics.
Material and Build Quality
Mount materials determine durability and how the mount responds to heat, oil, and mechanical stress. Rubber compounds are common for vibration damping, while hydraulic or multi-material mounts can offer improved NVH control. Higher-quality materials resist deterioration from engine bay conditions and maintain performance over time.
Look for mounts with corrosion-resistant metal brackets and well-bonded rubber or fluid elements. Better build quality reduces the chance of cracking, separation, or fluid leaks that would degrade isolation and require earlier replacement.
Vibration Isolation Performance
The primary job of an engine mount is to control how vibration transmits from the engine to the chassis. Effective isolation reduces idle shake, driveline buzz, and resonance that can be felt through the cabin and steering. Different mount designs trade off firmness for damping; stiffer mounts limit movement but may transmit more high-frequency vibration.
Consider how much vibration you can tolerate versus how much engine movement you need to control. For vehicles used for daily driving, prioritize mounts that balance damping and support. For heavy-load use, mounts that limit movement under torque may be more important.
Durability Under Load
Engine mounts must withstand constant cyclic loading from engine torque, road forces, and thermal cycles. Durability affects how long the mount maintains isolation and structural integrity. Repeated heavy loads can cause rubber to fatigue or bonded interfaces to fail, leading to increased engine movement and noise.
Assess whether the mount construction and materials are specified to handle the expected duty cycle. Reinforced brackets, thicker bonding layers, and robust internal components typically indicate better longevity in demanding conditions.
Ease of Installation
Installation complexity affects whether you can do the replacement yourself or should plan for professional help. Some mounts install with the engine supported on a jack and a few accessible bolts, while others require removing ancillary components or navigating tight spaces. Compatibility with existing hardware reduces the need for additional parts.
Consider whether the mount includes required brackets or hardware, and whether the procedure requires specialty tools. Clear installation orientation and matching bolt patterns shorten install time and lower the chance of incorrect assembly that could compromise performance.
NVH and Driving Use Case
Noise, vibration, and harshness performance should align with how the vehicle is used. A mount optimized for minimal NVH is ideal for street driving and comfort-focused use, while a firmer torque-oriented mount better controls engine movement during towing or spirited driving. The right choice balances comfort and control based on typical usage.
Think about tradeoffs: a softer mount may reduce cabin vibration but allow more engine movement under load, whereas a firmer design reduces movement but can transmit more noise. Match the mount to the Dodge Dakotas common operating conditions.
FAQ
What are the common symptoms of a failing engine mount?
Common signs include increased vibration at idle, noticeable engine movement during acceleration or shifting, and banging or clunking noises when starting or stopping. You may also feel more transmission of engine vibration through the cabin, especially during load changes.
Can I replace an engine mount myself?
Many engine mount replacements are do-it-yourself feasible if you have basic tools and a floor jack to support the engine. Some mounts are more accessible than others; tight spaces or mounts requiring removal of accessories can complicate the job. If you are unsure about safely supporting the engine or torque specs, seek professional assistance.
How long do engine mounts typically last?
Service life varies based on material quality, driving conditions, and exposure to heat and oil. Under normal driving, mounts often last several years, but frequent heavy loads, rough roads, or exposure to fluids can shorten their lifespan. Regular inspection helps catch deterioration before it causes further damage.
Will a worn engine mount cause engine noise?
Yes, worn mounts can increase noise and clunking as the engine moves more within the bay. When mounts no longer isolate vibrations effectively, you may hear more engine harshness or impact noises during shifts and rapid throttle changes.
Does the mount type affect towing and hauling performance?
Mounts that better limit engine movement under torque can improve driveline stability during towing or heavy hauling. A mount chosen for higher load control helps reduce stress on transmission and driveline components when the engine produces strong torque spikes.
How We Chose the Best Dodge Dakota Engine Mount
We focused on engine mounts that provide correct fitment and effective vibration isolation for the Dodge Dakota. Primary evaluation criteria included fitment accuracy to factory locations and bolt patterns, material construction and durability under heat and oil exposure, and the mounts ability to limit engine movement during acceleration and deceleration. We also considered vibration damping performance, since excessive transmission of engine vibration affects comfort and component longevity, and ease of installation for typical DIY or professional replacement. Excluded items included universal or generic mounts that do not match the Dodge Dakotas specific mounting points and any mounts that lacked clear material or specification data. Our shortlist favors mounts that balance durability, NVH control, and straightforward installation for the vehicle in question.
Our full evaluation process is outlined in our review methodology.
Conclusion
When choosing an engine mount for a Dodge Dakota, prioritize fitment accuracy and the mounts vibration isolation characteristics. Balance durability and NVH control against how you use the vehicle, since mounts designed for firmer torque control will feel different from those aimed at cabin comfort. Inspect mounting hardware and installation requirements before you buy, and be prepared to address tradeoffs between ride comfort and engine movement control. Selecting a mount that matches the trucks operating demands will deliver the best long-term performance.
Explore More:
- Check out all Dodge Dakota parts & accessories
- Explore Engine
- Browse all Auto Parts
