Note: This article contains affiliate links. If you click on these links and make a purchase, I may earn a small commission at no extra cost to you. This helps support my research and content. Read my full affiliate disclaimer here.
Upgrading the exhaust can change how your Dodge Journey breathes and sounds in daily driving and spirited use. Choosing the right Dodge Journey cat-back exhaust system matters because it affects engine backpressure, tone, and long-term durability. This guide covers six shortlisted cat-back exhaust systems chosen for fitment quality and material construction. We evaluated each option on compatibility, build material, and installation effort to help you narrow choices quickly. Read on to see which features matter most and what to expect during installation.
Looking for other parts? See all Dodge Journey parts & accessories.
Top Picks at a Glance
| Best Reviewed A top-rated pick with lots of positive feedback | MBRP S5200AL 3" Cat-Back Single-Side Exhaust System (Aluminized Steel) |  |
| Best Quality Built to a higher standard if you want something more solid | Borla Cat-Back Exhaust System ATAK for 2019–2023 Ram 1500 5.7L |  |
| Best Budget The cheapest option that still gets the job done reliably | MBRP S5236AL 3" Aluminized Steel Single Side Exit Cat-Back Exhaust System |  |
| Most Sold A high-volume bestseller chosen again and again | Flowmaster Outlaw Series Cat-Back Exhaust System (817688) |  |
| Best Value for Money The sweet spot between price and what you get | MBRP Black Series Cat-Back Exhaust System (S5090BLK) |  |
| Best Overall The best all-around choice for most situations | MBRP XP Series 3-inch Dual Split Rear Race Cat-Back Exhaust System |  |
1. MBRP S5200AL 3" Cat-Back Single-Side Exhaust System (Aluminized Steel)
| Installation Type | Clamp-On |
|---|---|
| Finish Type | Aluminized |
| Manufacturer | MBRP |
| OEM Part Number | S5200AL |
The MBRP S5200AL cat-back replaces the stock rear exhaust from the catalytic converter back with a single-side, 3-inch system built from heavy aluminized steel. It is intended for bolt-on installation using clamps and factory hangers so most installs are a one- to two-hour garage job when the midpipe is trimmed per fitment instructions. In use the system opens exhaust flow to yield a deeper, throaty tone and measurable improvements in throttle response and torque; MBRP claims gains in horsepower and a small fuel-economy benefit from reduced backpressure. Notable features are the heavy 16-gauge aluminized construction and a polished stainless tip for a factory-quality appearance without the cost of full stainless. Practical benefits include straightforward install hardware in one box and a design meant to resist seam corrosion better than generic aluminized kits. Limitations are that sound character can be loud for long highway runs and some configurations require cutting and minor fitting work, and aluminized steel will not match stainless for long-term corrosion resistance in very salty environments.
Best for: A reliability-focused buyer who wants a durable, budget-conscious cat-back that improves exhaust flow and drivability without expensive stainless upgrades.
Less Ideal for: Drivers who prioritize ultimate corrosion resistance or a perfectly refined, quiet highway tone should consider higher-end stainless systems or different muffler choices.
- Bolt-on clamp-on design that fits factory hangers for relatively simple installation
- 3-inch pipe size improves exhaust flow for better throttle response and potential horsepower gains
- Heavy 16-gauge aluminized construction with sealed seams for improved corrosion resistance versus cheap aluminized kits
- Aluminized steel is less corrosion-resistant than full stainless in coastal or salted-road conditions
- Some bed/cab configurations require trimming and fitting which adds installation time and effort
- Can produce noticeable drone on highway speeds for some drivers
Verdict A budget-friendly, reliability-minded cat-back that delivers stronger flow and a throaty tone but with aluminized steel trade-offs in long-term corrosion resistance.
2. Borla Cat-Back Exhaust System ATAK for 2019–2023 Ram 1500 5.7L
| Fitment | 2019–2023 Ram 1500 5.7L Crew Cab |
|---|---|
| Material | T-304 Stainless Steel |
| Tip Style | Dual split rear exit single 5" round polished tips |
| Construction | All welded |
This Borla cat-back replaces the factory back half with a full T-304 stainless steel system engineered to deliver the ATAK, aggressive exhaust note while keeping a bolt-on installation. It is designed for 2019–2023 Ram 1500 5.7L crew cab trucks and installs using factory hanger locations and band clamps so most shops can fit it without major modification. The all-welded construction and polished 5-inch tips give a durable, corrosion-resistant finish and an obvious visual upgrade. In practice the system amplifies cold starts and low-rpm burble substantially and settles to a more controlled tone at highway speeds, with users reporting minimal drone in the cabin. Installation can be time consuming if you do it on jack stands because of tight clearances and stubborn hangers, so plan for a proper lift or exhaust-hanger tool. This kit is focused on sound and quality rather than quiet refinement, so expect a pronounced, performance-oriented tone and the need to manage neighborhood noise if you drive early mornings.
Best for: Performance-oriented buyers who prioritize a loud, aggressive exhaust tone and durable materials to match spirited driving and aftermarket upgrades.
Less Ideal for: Drivers who need a quiet, neighborhood-friendly system or those who prefer a mild, factory-like cruising character should consider a less aggressive muffler option.
- T-304 stainless steel construction for corrosion resistance and longevity
- ATAK muffler provides a pronounced, performance-focused exhaust note
- Bolt-on installation using factory hangers and band clamps
- Polished 5-inch dual split rear tips improve rear appearance
- Very aggressive sound that may be too loud for close neighborhoods
- Installation can be difficult without a lift or exhaust-hanger removal tool
Verdict High-quality stainless cat-back built for drivers who want a loud, durable ATAK sound and are willing to accept increased noise and a more involved installation.
3. MBRP S5236AL 3" Aluminized Steel Single Side Exit Cat-Back Exhaust System
| Material | Aluminized steel |
|---|---|
| Pipe diameter | 3 inches |
| Exit style | Single side exit |
| Part number | S5236AL |
This MBRP cat-back system replaces the factory rear section with a 3-inch aluminized steel single side exit that aims to boost torque and horsepower while producing a richer exhaust note. It is intended for bolt-up installation using common hand tools and is typically fitted where a straightforward, cost-conscious upgrade is wanted. The heavy 16-gauge aluminized construction and aluminum-silica seam coating give better corrosion resistance than bare steel while keeping the price low. Buyers can expect a deeper, mellow sound at idle and a fuller tone under throttle without excessive cabin drone. Some customers reported easy assembly and a good fit, though a few received damaged pieces and had to make minor repairs before installation. This system is offered as a practical performance and sound upgrade for owners seeking value rather than premium stainless finishes or top-tier longevity.
Best for: Value-driven owners who prioritize measurable performance and sound improvements on a budget and prefer a practical, no-frills upgrade mindset.
Less Ideal for: Buyers seeking the longest-lasting stainless-steel finish, a showroom appearance, or a completely maintenance-free long-term solution should consider higher-end alternatives.
- Aluminized 16-gauge steel construction offers improved corrosion resistance compared with plain steel at a lower cost than stainless
- Designed to increase torque and horsepower for noticeable but moderate performance gains
- Produces a rich, mellow exhaust note that opens up under acceleration without heavy drone
- Claims straightforward installation with common hand tools for shop or DIY fitment
- Aluminized steel is less durable long-term than stainless steel in harsh climates
- Some units arrived with damaged pieces requiring minor repairs or rework before installation
- Notably heavier and less premium in appearance compared with stainless or polished systems
Verdict A cost-conscious cat-back that gives better sound and modest performance gains with reasonable corrosion protection, but not the longevity of stainless options.
4. Flowmaster Outlaw Series Cat-Back Exhaust System (817688)
| Manufacturer | Flowmaster |
|---|---|
| Model | 817688 |
| Finish Type | Powder Coated |
| Exterior | Painted |
| Item Weight | 51.8 pounds |
This Flowmaster Outlaw cat-back replaces the factory exhaust on a Dodge Journey to deliver a louder, deeper exhaust note and a more aggressive appearance. It is a complete cat-back system that uses stainless-steel construction with powder-coated components and black ceramic tips for a finished look. Typical use is direct replacement and installation under the vehicle to change sound and exhaust flow; shops report the system bolts in with some adjustment but occasional tweaks such as re-clamping or welding tips improve fit and security. The system is built for sound and durability, offering a pronounced rumble on acceleration and noticeable highway presence, though several users note some highway drone. Installation can be time-consuming without a lift and the supplied hardware may be light, so expect to bring stronger fasteners or professional installation if you want a clean, long-lasting fit. The result is a robust, vocal exhaust upgrade for owners seeking a clear change in character rather than subtle refinement.
Best for: Risk-averse mainstream owners of a Dodge Journey who want a reliable, well-known brand upgrade that noticeably increases exhaust character without chasing extreme aftermarket mods.
Less Ideal for: Drivers who prioritize a quiet, stock-like cabin or who need a completely bolt-on, no-adjustment install should consider milder or factory-quality replacements instead.
- Purpose-built cat-back for a more aggressive, deeper exhaust tone
- Stainless steel construction for corrosion resistance and longevity
- Powder-coated finish and black ceramic tips for a factory-quality appearance
- Complete system that replaces both muffler and piping for consistent sound tuning
- Can produce noticeable highway drone for some drivers
- Hardware included with tips and clamps may be undersized or require replacement
- May need adjustment or welding to achieve perfect tip alignment and seal
Verdict A durable, aggressive-sounding cat-back that gives a Dodge Journey a distinct rumble but may require stronger hardware and minor fitment work.
5. MBRP Black Series Cat-Back Exhaust System (S5090BLK)
| Model | S5090BLK |
|---|---|
| Tip Material | T-304 Stainless Steel |
| Tube Diameter | 3" |
| Finish | Black Coated |
This MBRP Black Series cat-back replaces the factory back half of the exhaust to deliver a louder, deeper tone and a bolt-on installation. For a Dodge Journey, the system is used to delete the stock resonator and route exhaust through mandrel-bent 3 inch tubing to reduce restriction and produce a fuller sound under acceleration. Notable features include T-304 stainless steel tips, a black coated finish intended for use in non-salty driving areas, and fully sealed seams to resist corrosion. Real-world benefits are straightforward: easier installation than a full custom system, clear performance-oriented sound, and durable stainless tips that maintain appearance better than mild-steel alternatives. Limitations to keep in mind are the pronounced cabin drone some users report with larger intermediate piping and the black coating’s vulnerability to harsh winter road chemicals, which may fade or peel over time. Fit and tip alignment have occasional variability so check fitment closely before final installation.
Best for: Practical optimizers who want an affordable, bolt-on exhaust that delivers noticeable sound and perceived performance without custom fabrication and who prioritize value over perfect factory-match appearance.
Less Ideal for: People seeking a near-silent or factory-quiet replacement, or owners in salt-belt regions who need a finish guaranteed to withstand winter road chemicals.
- Bolt-on design for straightforward installation without welding
- Mandrel-bent 3" tubing reduces flow restriction for a fuller exhaust note
- T-304 stainless steel tips resist corrosion better than standard plated tips
- Black coated finish offers a stealth look when used in appropriate climates
- Sealed seams to improve rust resistance compared with unfinished systems
- Black coating is not recommended for roads treated with salt or heavy chemicals and may degrade
- 3" intermediate piping can generate noticeable interior drone on some engines
- Some users report tip fitment or finish issues out of the box
Verdict A budget-friendly cat-back that reliably adds a deeper performance tone and easy installation but can produce interior drone and requires care in salty conditions.
6. MBRP XP Series 3-inch Dual Split Rear Race Cat-Back Exhaust System
| Brand | MBRP |
|---|---|
| Series | XP Series |
| Exhaust Type | Cat-back |
| Tip Size | 4.5 inches |
The MBRP XP Series cat-back replaces the factory rear section with mandrel-bent 3-inch tubing and a race-style muffler to increase exhaust flow and give a deeper, more aggressive exhaust note. It is a direct-fit bolt-on system that uses factory hangers and includes clamps and hardware for a relatively straightforward installation on compatible vehicles. The system is built from stamped 16-gauge T409 stainless-style construction designed to resist corrosion and is dyno-developed to improve flow, which can translate to a modest increase in throttle response and efficiency when paired with other bolt-on modifications. Sound tuning is focused on a muscular tone with controlled highway behavior to limit droning. Buyers should note reports of fitment variability and lower-grade weld appearance on some units, and the tips may require alignment or additional fastening for a perfect finish. This is a performance-first cat-back that balances sound and function but demands careful install and alignment to avoid fitment issues.
Best for: A balanced all-round buyer who wants a noticeable sound and measurable flow improvements without major vehicle modification and is willing to spend time on careful installation.
Less Ideal for: Not the best choice for buyers seeking a flawless factory-quality fit straight out of the box or those unwilling to perform minor adjustments during install.
- Mandrel-bent 3-inch tubing improves exhaust flow and reduces backpressure
- Bolt-on design that uses factory hangers and includes all clamps and hardware
- Tuned muffler delivers a deep, aggressive tone with limited highway drone
- Dyno-tested development aimed at modest performance and efficiency gains
- Some owners report inconsistent fitment and alignment issues during installation
- Weld finish and material grade are reportedly below premium competitors
- Exhaust tips may need additional fastening or adjustment to sit correctly
Verdict A performance-oriented, bolt-on cat-back that gives the Dodge Journey a deeper, aggressive tone and better flow if you accept occasional fitment fiddling.
Choosing the Right Dodge Journey Cat-back Exhaust System: Key Factors to Consider
Material and Corrosion Resistance
The pipe and muffler material determine longevity and resistance to road salt and moisture. Stainless steel resists corrosion far better than mild steel, which matters if you drive in wet or coastal conditions.
Construction quality also affects warranty expectations and how long the system retains appearance and structural integrity. Look for thicker wall tubing and welded joints rather than clamped assemblies, as those choices reduce the chance of leaks and failures over time.
Fitment and Exhaust Routing
Accurate fitment ensures the system aligns with factory hangers and avoids clearance issues with underbody components. Proper routing prevents contact with heat-sensitive parts and reduces vibration that can cause wear.
A system designed specifically for the Dodge Journey will typically include all necessary hangers and mounting hardware. Minor variations in model year and trim can matter, so confirm the listed fitment details before purchase to prevent modification needs.
Muffler Design and Sound Profile
Muffler type largely controls the exhaust note, from subtle refinement to a more aggressive tone. Chambered and baffled mufflers provide a deep, throaty sound without excessive drone, while straight-through designs increase volume and rasp.
Consider where and how you drive. A louder setup can feel engaging on open roads but may become fatiguing during long highway trips. Manufacturer sound descriptions, clips, or independent demonstrations help set realistic expectations.
Installation Complexity
Some cat-back systems bolt directly to the factory flange and use existing hangers, allowing a straightforward DIY installation with basic tools. Others require cutting, relocating hangers, or additional clamps and seals that increase labor time.
Evaluate whether you have the tools and space to work safely under the vehicle. If installation instructions are unclear or special tools are needed, plan for professional installation to ensure proper fit and to avoid warranty issues.
Performance Impact and Backpressure
A well-designed cat-back exhaust can reduce backpressure and improve exhaust scavenging, which can translate to smoother power delivery and throttle response. However, gains depend on the rest of the engine setup and are usually modest for naturally aspirated engines.
Balance flow improvements with acceptable sound levels. Extremely free-flowing systems can hurt low-end torque on some engines, so choose a design that complements the Dodge Journey's power characteristics rather than simply maximizing flow.
Hardware, Gaskets, and Warranty
Complete hardware and proper gaskets simplify installation and reduce the risk of leaks. Systems that include new clamps, bolts, and flange gaskets make for a cleaner fit and help avoid sourcing parts separately.
Warranty coverage gives insight into manufacturer confidence and expected lifespan. Check the terms for corrosion and performance coverage and verify what conditions might void the warranty to make an informed long-term choice.
FAQ
Will a cat-back exhaust system fit all Dodge Journey model years?
Fitment often depends on model year and specific configurations such as engine type and rear suspension layout. Many systems are listed for a range of years, but you should confirm the advertised fitment for your exact model year and trim before buying.
How difficult is catback exhaust installation on a Dodge Journey?
Installation difficulty varies by system. Many cat-back systems are bolt-on and can be installed with basic hand tools if you have lift access. Some require cutting or hanger modification, in which case professional installation is recommended to ensure correct alignment and sealing.
Will changing to a different cat-back exhaust affect fuel economy?
A cat-back exhaust can slightly influence efficiency by altering backpressure and exhaust flow. In most cases changes to fuel economy are modest and depend on driving style and engine tuning rather than exhaust alone.
Can I expect a big power gain from a cat-back exhaust?
Power gains from a cat-back system are usually modest on stock engines. The most noticeable changes are in throttle response and exhaust sound. Larger gains typically require complementary modifications such as intake or engine tuning.
What causes exhaust drone and how can I avoid it?
Drone often results from resonance at certain engine speeds and is influenced by muffler design and pipe geometry. Choosing systems with chambered or engineered mufflers and paying attention to inlet and outlet diameters can reduce the risk of drone for highway cruising.
How We Chose the Best Dodge Journey Cat-back Exhaust System
We prioritized items that offer confirmed fitment for the Dodge Journey and that use durable materials suited to road use and varying climates. Key evaluation criteria included material construction and corrosion resistance, exhaust routing and fitment accuracy, muffler design and expected sound profile, installation complexity and hardware completeness, and performance impact in terms of flow and backpressure. We excluded products lacking clear fitment data for the vehicle or those with uncertain material specs. We also filtered out options that required extensive modification beyond bolt-on installation. The final six products represent well-documented cat-back exhaust systems that balance sound, durability, and straightforward installation for Dodge Journey owners.
Our full evaluation process is outlined in our review methodology.
Conclusion
Prioritize systems that list explicit fitment for your Dodge Journey, use durable materials, and include full installation hardware. Decide how much of a sound change you want and weigh that against installation complexity and potential effects on low-end response. Balancing material quality, fitment accuracy, and muffler design will give you the best long-term value. If installation looks beyond your comfort level, factor professional labor into the decision to ensure a sealed and correctly aligned system.
Explore More:
- Check out all Dodge Journey parts & accessories
- Explore Exhaust & Emissions
- Browse all Auto Parts
