Note: This article contains affiliate links. If you click on these links and make a purchase, I may earn a small commission at no extra cost to you. This helps support my research and content. Read my full affiliate disclosure here.
If you want a firmer, lower stance for your Dodge Charger, choosing the right lowering springs matters for handling, ride comfort, and tire wear. The right springs change the car's center of gravity and suspension behavior, so selecting springs that match your driving habits and vehicle setup is important. This guide covers six shortlisted lowering springs that represent common approaches to lowering the Charger. We evaluated each option for expected drop height, ride quality, durability, and ease of installation. Read on to see which characteristics to prioritize based on how you plan to use your Charger.
Looking for other parts? See all Dodge Charger parts & accessories.
Top Picks at a Glance
| Best overall The best all-around choice for most situations | D2 Pro Lowering Springs for 2005–2010 Dodge Charger / Chrysler 300 (lower) |  |
| Best quality Built to a higher standard if you want something more solid | Eibach PRO-KIT Suspension Lowering Spring Kit for Dodge Charger |  |
| Best Value The sweet spot between price and what you get | Touring Tech Lowering Springs — Performance Series for 2011+ Dodge Charger / 300C RWD |  |
| Best budget The cheapest option that still gets the job done reliably | maXpeedingrods Lowering Springs for Dodge Charger RWD (2011–2023) |  |
| Highest Rated A top-rated pick with lots of positive feedback | Eibach Pro-Kit Performance Lowering Springs (28105.140) for Dodge Charger V6 |  |
| Best Seller A high-volume bestseller chosen again and again | Godspeed Traction-S Lowering Springs for Dodge Charger R/T SRT (2015–2021) |  |
1. D2 Pro Lowering Springs for 2005–2010 Dodge Charger / Chrysler 300 (lower)
| Fitment | 2005–2010 Charger / 300 |
|---|---|
| Material | High tensile chrome silicon steel |
| Manufacturing | Cold-wound and heat-treated |
| Spring design | Progressive-rate coils |
| Certification | ISO 9001 with TUV approval |
These D2 Pro lowering springs are a direct-fit replacement for the lower springs on 2005–2010 Dodge Charger and Chrysler 300 applications and are engineered to lower the vehicle while sharpening handling. Made from high-tensile chrome silicon steel with cold-wound, heat-treated manufacture and a corrosion-resistant finish, they use progressive-rate coils to reduce body roll and improve corner stability without turning the ride into a track-only setup. Typical use is as a one-time suspension upgrade: install the springs (front and rear lower springs) to drop ride height, lower the center of gravity, and achieve a more aggressive stance with improved road response. Practical benefits include a noticeable reduction in body lean, bench-tested spring-rate consistency, and ISO 9001/TUV manufacturing credentials that suggest quality control. Limitations are typical of lowering springs: a firmer ride over bumps, possible rubbing on larger wheel/tire setups, and the need to check alignment and bump stops after installation. Professional installation or proper tools are recommended for safe, correct fitment on the Charger/300 platforms.
Best for: Balanced owners who want a noticeable visual drop and improved handling on a Dodge Charger/300 without committing to full coilovers, prioritizing a mix of daily usability and sportier road manners.
Less Ideal for: Drivers seeking maximum track performance or adjustable ride height should consider coilovers or a dedicated performance suspension instead.
- Direct factory-quality replacement fitment for 2005–2010 Dodge Charger/300 lowers installation.
- Progressive-rate coil design improves cornering and reduces body roll without extreme harshness.
- Cold-wound, heat-treated chrome silicon steel construction for consistent spring rates and longevity.
- Durable corrosion-resistant finish and production in an ISO 9001/TUV facility indicate controlled manufacturing quality.
- Will produce a firmer ride compared with stock springs, especially over rough roads.
- May cause rubbing with aggressive wheel and tire combinations and can require trim or spacers.
- Installation requires proper tools and alignment adjustment after fitting to avoid uneven tire wear.
Verdict: A well-made, direct-fit lowering spring set that sharpens handling and stance on 2005–2010 Dodge Charger/300 models while keeping the setup practical for daily use.
2. Eibach PRO-KIT Suspension Lowering Spring Kit for Dodge Charger
| Model | PRO-KIT |
|---|---|
| Compatibility | Dodge Charger 2015-2024 |
| Quantity | 4 Coil Springs |
| Finish | Powder Coat |
The Eibach PRO-KIT lowering spring kit replaces the factory springs with progressive-rate coils designed to lower the Dodge Charger and sharpen handling. Installation is typical for spring swaps and is usually done with a spring compressor and strut disassembly or by a shop. The kit’s progressive spring design and powder coat finish aim to preserve ride quality while reducing body roll and front-end dive under braking, which benefits spirited driving and cornering stability. These springs are sold as a complete four-coil set sized for Charger fitment, so they address front and rear balance at once. Limitations to expect are a firmer ride compared with stock, and installation requires proper alignment afterward to avoid uneven tire wear. This kit does not include dampers, so owners seeking the best performance pairing should consider upgraded shocks or struts to match the firmer spring rates.
Best for: Performance-oriented buyers who prioritize sharper handling and reduced body roll on a Dodge Charger and want a factory-quality lowering spring designed for spirited driving.
Less Ideal for: Buyers seeking a softer daily-driven ride or those unwilling to follow up with alignment and possible damper upgrades should consider other options or a full shock and spring package.
- Progressive-rate coil design improves cornering stability and reduces body roll.
- Complete four-spring kit provides matched front and rear lowering for balanced handling.
- Durable red powder coat finish protects against corrosion and road wear.
- Designed specifically for Dodge Charger 2015–2024 fitment for straightforward compatibility.
- Will produce a noticeably firmer ride compared with factory springs.
- Does not include shocks or struts, so suspension dampers may need upgrade to optimize performance.
Verdict: A performance-focused lowering spring kit that sharpens Charger handling but requires acceptance of a firmer ride and possible damper upgrades.
3. Touring Tech Lowering Springs — Performance Series for 2011+ Dodge Charger / 300C RWD
| Fitment | 2011+ Charger / 300C RWD |
|---|---|
| Material | 55 chrome silicon steel |
| Includes | Front and rear lowering springs |
| Manufacturer | Touring Tech |
| Part number | TT-G212 |
These Touring Tech Performance Series lowering springs replace the factory coil springs to lower the ride height and sharpen the Charger/300C appearance and handling. They are made from high-tensile 55 chrome silicon steel with a protective coating and engineered as a direct-fit replacement for 2011+ Charger and 300C RWD models. In real-world use the springs deliver a noticeable drop in stance with many buyers reporting improved body control and a firmer but still compliant ride when paired with compatible shocks or struts. Installation is straightforward for a shop or experienced DIYer but alignment after fitment is required to avoid uneven tire wear. Some users report inconsistent fitment or uneven rear sag on specific vehicles so confirm fitment for your exact trim before buying. These springs come with a lifetime unlimited mileage warranty which gives extra peace of mind, and they are best when combined with refreshed dampers for predictable handling and tire clearance.
Best for: Practical optimizers who want a cost-effective way to lower a 2011+ Charger or compatible 300C for better looks and crisper handling without chasing top-tier performance parts.
Less Ideal for: Buyers seeking precise, track-focused suspension tuning or those unwilling to verify exact trim fitment and budget for new dampers and alignment after installation.
- Direct-fit design for 2011+ Charger and 300C RWD simplifies installation
- Made from 55 chrome silicon steel for higher tensile strength than many factory springs
- Protective coating reduces corrosion risk over time
- Provides a lower stance with improved body control when paired with appropriate dampers
- Some reports of inconsistent fitment and uneven rear sag on certain vehicles
- May require fresh shocks or struts to avoid a firmer or bouncy ride if paired with worn dampers
Verdict: A durable, direct-fit lowering spring kit that gives 2011+ Charger and 300C RWD models a lower stance and improved everyday handling at a practical price.
4. maXpeedingrods Lowering Springs for Dodge Charger RWD (2011–2023)
| Fitment | Dodge Charger RWD 2011-2023; Chrysler 300 RWD 2011-2023 |
|---|---|
| Material | SAE 9254 cold-wound steel |
| Front spring rate | 4 kg/mm (224 lbs/in) |
| Rear spring rate | 5 kg/mm (280 lbs/in) |
These maXpeedingrods lowering springs are a direct-fit replacement for rear-wheel-drive Dodge Charger (2011–2023) and Chrysler 300 models, engineered to drop the front and rear ride height for a sportier stance and firmer handling. Made from SAE 9254 high-tensile cold-wound steel with a corrosion-resistant coating, they are designed to resist salt and moisture and were tested for fatigue and salt spray durability. With front and rear spring rates specified, the set tightens body roll and improves cornering responsiveness while remaining compatible with factory and aftermarket shocks for straightforward bolt-on installation. Practical benefits include improved road feel, a lower center of gravity, and an affordable alternative to pricier performance springs. Limitations to consider are the fixed lowering amount and spring rates which may change ride comfort on very rough roads, and the need to check shock condition because worn shocks can reduce the expected handling gains. Professional installation and alignment are recommended to ensure proper suspension geometry after fitment.
Best for: Budget-conscious Charger owners who want a straightforward way to lower ride height and improve handling without spending on premium brands or full coilover systems.
Less Ideal for: Drivers seeking fully adjustable suspension, extreme track-focused lowering, or those unwilling to have any change to ride firmness should look at adjustable systems instead.
- Direct-fit for Dodge Charger RWD 2011–2023 to simplify installation
- High-tensile SAE 9254 steel with anti-corrosion coating for durability
- Tested for fatigue and salt spray to demonstrate longevity
- Compatible with factory and aftermarket shocks so no major modifications required
- Fixed spring rates and lowering amount may reduce comfort over very rough roads
- Requires inspection or replacement of worn shocks to realize handling benefits
Verdict: A cost-effective, corrosion-resistant lowering spring set that sharpens handling and stance for RWD Dodge Chargers while keeping installation simple.
5. Eibach Pro-Kit Performance Lowering Springs (28105.140) for Dodge Charger V6
| Model | 28105.140 |
|---|---|
| Brand | Eibach |
| Lowers vehicle | 1.0 inch – 1.5 inch |
| Special Features | Progressive spring design for improved ride and handling |
These Eibach Pro-Kit lowering springs replace the factory springs to lower a Dodge Charger V6 roughly 1.0 to 1.5 inches, tightening body roll and sharpening turn-in without a radical ride penalty. They are typically used by owners who want a subtle, factory-quality drop and more confident handling for everyday driving and spirited cornering. The progressive spring design smooths small bumps while still offering firmer support under heavy cornering, which helps braking and reduces body lean. Installation requires a standard spring swap and an alignment afterward; some Chargers may need camber adjustment hardware to center the steering wheel after fitment. The springs work well with existing shocks if those are in good condition, but pairing with fresh or performance shocks will extract the best handling. Expect a slightly firmer ride and potential clearance considerations with very large wheels or extreme wheel/tire setups.
Best for: Reliability-focused buyers who want a modest, well-engineered lowering solution that improves handling and durability while maintaining daily drivability.
Less Ideal for: Owners seeking an aggressive drop, track-only suspension, or who want a plush, factory-soft ride should consider other options.
- Designed to lower the vehicle 1.0–1.5 inches for improved handling and a cleaner stance
- Progressive spring design balances everyday ride comfort with sportier control during cornering
- Reputable aftermarket brand with a long track record on Charger applications
- May produce a firmer ride compared with stock springs, especially on rough roads
- Can require alignment and in some Charger setups an aftermarket camber kit to correct steering wheel position
Verdict: A dependable, modest lowering kit that tightens Charger V6 handling and stance while preserving daily comfort.
6. Godspeed Traction-S Lowering Springs for Dodge Charger R/T SRT (2015–2021)
| Fitment | Dodge Charger R/T SRT RWD (LD) 2015-2021 |
|---|---|
| Avg. Drop (F/R) | 0.8" / 1.3" |
| Spring Rate (F/R) | 4.08 kg/mm / 5.62 kg/mm |
| Material | SAE 9254 spring wire |
| Coating | Powder coat finish |
These Godspeed Traction-S lowering springs are designed to drop the ride height of Dodge Charger R/T and SRT RWD (2015–2021) models that do not have Nivomat shocks, delivering modest front and rear lowering while keeping a daily-friendly ride. The springs are cold wound from SAE 9254 wire and heat treated to resist sag, then powder coated for corrosion protection. In practice they provide quicker turn-in, firmer body control and improved cornering compared with factory springs, and they are intended to work with factory shocks or better with upgraded performance shocks. Installation is a direct-fit swap and the advertised drop (about 0.8 inches front, 1.3 inches rear) should improve stance without excessive rubbing for most stock-wheel setups. Important limitations: they are not compatible with Nivomat-equipped models unless you also swap to regular shocks and accept a warning light, and ride firmness will increase compared with stock which may be noticeable on rough roads. Build quality looks solid but you should pair them with appropriate alignment and possibly shock upgrades for best results.
Best for: A safety-conscious Charger owner who wants a modest, reliable lowering and better on-road handling without extreme ride changes, and who prioritizes factory-like compatibility and durability.
Less Ideal for: Drivers seeking aggressive drop heights, the plushest possible ride, or those who do not want to modify or replace Nivomat-equipped suspension components.
- Cold-wound SAE 9254 spring wire with heat treatment for improved durability and reduced sag over time
- Powder coat finish helps resist corrosion and extends service life
- Designed to maintain a comfortable daily ride while lowering for improved handling and appearance
- Direct-fit for 2015–2021 Dodge Charger R/T and SRT RWD models without Nivomat, simplifying installation
- Not compatible with Nivomat shock systems without swapping to regular shocks which can trigger a dashboard warning light
- May increase ride firmness and transmit more road imperfections compared with stock springs
Verdict: Solid, durable lowering springs that give the Dodge Charger a firmer, better-handling stance without extreme drop or daily-ride compromise.
Choosing the Right Dodge Charger Lowering Springs: Key Factors to Consider
Drop Height
Drop height determines how much lower your Charger will sit compared with stock ride height. A modest drop often improves handling and reduces body roll while preserving daily drivability, whereas an aggressive drop can improve looks and cornering but may introduce scraping, reduced suspension travel, and altered bump behavior. Consider the expected drop for front and rear separately to maintain proper rake and avoid negative handling consequences. Think about your regular driving surfaces; deeper drops increase the risk of bottoming out on speed bumps and uneven pavement.
Spring Rate and Ride Quality
Spring rate affects how the car responds to inputs, how quickly it settles after bumps, and how it transfers weight during cornering. Higher spring rates generally yield crisper handling and less body roll but can result in a harsher ride on rough roads. Match spring rate to your driving style: choose more compliant rates for comfort and daily use, or stiffer rates if you prioritize spirited driving or track days. Also consider whether the springs use linear or progressive profiles, as progressive springs can offer a compromise between comfort and performance.
Fitment Accuracy and Compatibility
Proper fitment ensures springs seat correctly and work with the Charger's suspension geometry. Incorrect lengths or rates can cause preload issues, faulty ride height, and accelerated wear on related components such as shocks, control arms, and bushings. Verify that the springs are specified for your Charger's model year and trim to avoid clearance problems. Consider whether rear springs are matched to the front to maintain balanced handling and appropriate rear ride height under load.
Durability and Corrosion Resistance
Springs are exposed to road salt, moisture, and debris, so finish and material quality matter for long-term performance. Coatings that resist chipping and corrosion will preserve spring integrity and appearance over time, reducing the chance of failure or uneven sagging. Look for springs made from proven spring steel with robust surface treatments. Durability is especially important if you drive in climates with winter conditions or near coastal areas where salt exposure is common.
Effect on Handling and Alignment Needs
Lowering springs change suspension geometry, which can affect camber, toe, and overall alignment. These changes influence tire wear, steering responsiveness, and cornering behavior. Some lowering heights induce negative camber that improves grip in corners but increases inner tire wear. Plan to have a professional alignment after installation to correct for geometry shifts. Understand that very low setups may require additional alignment adjustments or components such as adjustable camber plates to achieve optimal handling.
Installation and Maintenance
Installation complexity varies by design and whether additional tools or parts are needed. Some springs are straightforward drop-in replacements, while others may need disassembly of struts or spring compressors, which raises safety considerations. Factor in whether you will install the springs yourself or use a shop. Also consider ongoing maintenance, such as periodic checks for sag, noise, or corrosion, and the potential need to replace related components like shocks if they are not rated for the new spring rates.
How We Chose the Best Dodge Charger Lowering Springs
We focused on lowering springs designed specifically for the Dodge Charger and compared options across criteria that affect everyday drivability and longevity. Key evaluation points included targeted drop height ranges to ensure realistic appearance and handling changes for this model, spring rate consistency to assess expected responsiveness and control, material and coating quality to predict corrosion resistance, and fitment accuracy to avoid clearance or alignment problems. We also considered ride comfort tradeoffs to reflect street driving versus performance-focused setups, and the ease of installation for owners who may do the work themselves or prefer simple shop installs. We excluded generic, one-size-fits-all springs and any components intended solely for track-only use. Products that required additional suspension components to function as intended were also filtered out. The final list emphasizes options that balance improved handling, correct ride height, and reliable durability for the Dodge Charger platform.
Our full evaluation process is outlined in our review methodology.
FAQ
How much do lowering springs lower a Dodge Charger?
Lowering springs typically drop a Dodge Charger between about 1 and 2.5 inches, depending on the spring specification and whether front and rear rates are matched. Exact drop varies by model year and suspension trim, and it often depends on installed tire and wheel sizes as well. Expect measurable changes to ride height and handling, and plan for alignment after installation.
Can I install lowering springs myself?
You can install lowering springs yourself if you have the right tools and experience with suspension work, including spring compressors and safe jacking procedures. Many owners prefer to have a professional perform the install to avoid safety risks and to ensure proper seating. Regardless of who installs them, an alignment is usually necessary afterward.
Will lowering springs affect ride comfort?
Yes. Lowering springs often use higher spring rates and reduced travel, which generally produces a firmer ride. The degree of comfort change depends on the spring rate and the spring profile. Progressive springs can soften small-bump responses while still improving cornering for many street-driven Chargers.
Do I need to replace shocks when adding lowering springs?
It depends. If the existing shocks are worn or not rated for the new spring rates and lowered ride height, replacing them is advisable to maintain control and damping performance. New shocks or valving tuned for the lowered height will preserve handling and reduce premature wear on suspension parts.
Are lowered springs safe for daily driving?
Lowered springs can be safe for daily driving when the drop is moderate and the springs are matched to appropriate shock absorbers. Consider local road conditions, curb and ramp clearances, and potential changes to headlight aim. Proper installation and alignment help ensure predictable behavior in everyday driving.
Conclusion
Choosing the right lowering springs for a Dodge Charger is about balancing the desired look, improved handling, and acceptable ride comfort. Prioritize realistic drop heights, spring rates that match your driving style, and durable finishes to avoid premature issues. Plan for proper fitment checks, an alignment after installation, and potential shock upgrades if needed. By focusing on those tradeoffs you can pick a setup that enhances driving dynamics without compromising daily usability.
Explore More:
- Check out all Dodge Charger parts & accessories
- Explore Lowering Springs Maintenance & Repair Guides
- Explore Suspension & Steering
- Browse all Auto Parts
