Note: This article contains affiliate links. If you click on these links and make a purchase, I may earn a small commission at no extra cost to you. This helps support my research and content. Read my full affiliate disclaimer here.
If your Mitsubishi Eclipse is showing rough idling, poor throttle response, or inconsistent starts, the fuel injectors are a common place to look. Choosing the right fuel injector matters because it directly affects fuel delivery, engine efficiency, and drivability. This guide highlights the top shortlisted picks for Mitsubishi Eclipse fuel injector replacements and explains the key criteria used to evaluate them. We focused on measurable aspects like flow consistency and spray pattern precision to narrow the options. Read on to see the top choices and the factors that should guide your selection.
Looking for other parts? See all Mitsubishi Eclipse parts & accessories.
Top Picks at a Glance
| Best Reviewed A top-rated pick with lots of positive feedback | Pjvmvo CDH210 Fuel Injector Set (Set of 4) |  |
| Most Popular A crowd favorite that many people choose with confidence | HiSport Fuel Injector 0280158020 — 6‑Pack |  |
| Best Quality Built to a higher standard if you want something more solid | NECATUO Set of 4 Fuel Injectors (Replaces 15710-65D00) |  |
| Best Budget The cheapest option that still gets the job done reliably | Zxyculture Fuel Injector (replacement FJ344 / CDH-210) |  |
| Most Sold A high-volume bestseller chosen again and again | Kacrik 4PCS Fuel Injectors 1465A500 (8-hole) for Mitsubishi Eclipse Cross 1.5L |  |
| Best Value for Money The sweet spot between price and what you get | AUTOKAY Fuel Injector Flow-Matched Set (CDH-210) – Set of 4 |  |
| Best Overall The best all-around choice for most situations | Bosch 62410 Fuel Injector — Single |  |
1. Pjvmvo CDH210 Fuel Injector Set (Set of 4)
| Material | Metal |
|---|---|
| Inlet Connection Type | Barb |
| Outlet Connection Type | Barb |
| Number of Ports | 4 |
These Pjvmvo CDH210 injectors are sold as a set of four direct-fit replacements designed to restore fuel delivery where original units have failed. They install like factory replacements and come with O-rings and gaskets, which makes them a straightforward swap for compatible engines. The listing and user reports emphasize flow testing and balancing during manufacture, which translates to consistent spray patterns and stable idle when installed. Practical benefits include maintaining OEM duty cycle and pulse-width behavior so engine management continues to meter fuel without ECU recalibration, and buyers report successful use on Yamaha outboards and compatible 1.8L applications. Limitations are that fitment must be confirmed for each vehicle model before purchase and these are aftermarket parts rather than factory-brand units, so long-term durability can vary compared with dealer replacements. Also the listing references specific replacement numbers rather than broad vehicle compatibility, so confirm the match to your Mitsubishi Eclipse engine before installation.
Best for: Reliability-minded owners looking for a practical, tested replacement to restore fuel delivery without modifying engine controls or chasing performance gains.
Less Ideal for: Drivers seeking performance upgrades or custom tuning solutions should consider performance injectors or professional calibration instead of a direct replacement set.
- Direct-fit set of four designed to replace specific factory injectors for plug-and-play installation
- Includes O-rings and gaskets to simplify installation and reduce need for extra parts
- Units are flow tested and balanced to promote consistent spray patterns and smooth idle
- Maintains OEM-style duty cycle and pulse width so no ECU tuning is typically required
- Aftermarket part rather than factory-brand so long-term durability may differ from dealer units
- Product listing emphasizes specific replacement numbers so you must verify exact fitment for your engine
Verdict A practical, flow-tested direct-replacement injector set that restores factory-style fuel delivery when the correct fitment for your Eclipse is confirmed.
2. HiSport Fuel Injector 0280158020 — 6‑Pack
| Material | Metal, Plastic |
|---|---|
| Number of Ports | 4 |
| Inlet/Outlet Connection Type | National Pipe Tapered |
| Manufacturer Part Number | HSFI58020-6PCS |
This HiSport kit supplies six replacement fuel injectors sold as the 0280158020 direct-fit option. Each injector is metal and composite-plastic construction with a four‑hole spray pattern and is intended to restore injector function when originals are clogged or failing. Typical use is a full-bank replacement during an intake-rail or maintenance service to return even fuel delivery and smoother starting in colder conditions. The listing emphasizes factory-quality seals and pre-shipment testing, which aims to reduce early leakage and installation issues. Buyers report straightforward fitment and noticeable drivability improvements when installed correctly, though there are mixed reports about long-term consistency and some units triggering injector-circuit faults after installation. This product is practical for budget-conscious repairs or restoring performance quickly, but results can vary by vehicle and installation quality, so plan to verify compatibility and run post-install diagnostics after fitting.
Best for: Convenience-driven buyers who want an affordable, ready-made set to replace an entire bank quickly and get their vehicle back to reliable operation without hunting for individual injectors.
Less Ideal for: Drivers seeking guaranteed long-term OEM-level durability or those who need a calibrated performance injector for tuning should consider higher-end or brand-specific options instead.
- Sold as a complete six-pack for replacing a full bank at once
- Direct replacement for part number 0280158020 to simplify fitment checks
- Four‑hole injector design for smoother spray and improved cold starts
- Manufacturer claims factory‑style seals and warehouse testing before shipping
- Some buyers report early failures or injector circuit fault codes after installation
- Fitment and long-term consistency can vary between vehicles and installations
Verdict A budget-friendly six-pack that makes a fast full-bank replacement easy, but expect variable long-term reliability compared with higher-end or factory-specific injectors.
3. NECATUO Set of 4 Fuel Injectors (Replaces 15710-65D00)
| Material | Composite |
|---|---|
| Exterior Finish | Composite with Rubber O-Rings |
| Inlet Connection Type | Compression |
| Outlet Connection Type | Fuel Injector Connector |
| Number of Ports | 8 |
This NECATUO set supplies four fuel injectors intended as direct replacements for the referenced part number. Installers typically use the kit to restore even fuel delivery and engine smoothness when symptoms like rough idle, poor acceleration, or power loss indicate worn injectors. The injectors are made from corrosion-resistant composite material and use high-temperature viton O-rings to improve sealing and longevity in a marine or automotive environment. Reviews and included spec references indicate the parts match factory-length mounting and deliver consistent flow and spray pattern, which helps the engine run smoothly without error codes. The kit ships with all four injectors together, which is convenient when replacing multiple cylinders at once. Limitations are that the listing relies on exact part-number compatibility so you must confirm the injector cross-reference for your Mitsubishi Eclipse engine before buying, and this aftermarket unit may differ in long-term durability compared with higher-cost factory-brand injectors.
Best for: Performance-oriented owners seeking to restore or maintain smooth power delivery who prioritize consistent fuel spray and matched injector flow across cylinders.
Less Ideal for: Buyers who prefer dealer-sourced factory-brand injectors for guaranteed long-term OEM backing or those unwilling to verify exact part-number compatibility for their Eclipse engine.
- Sold as a matched four-piece set for replacing multiple cylinders at once
- Composite, corrosion-resistant construction with high-temp viton O-rings for improved sealing
- Designed to match referenced factory part numbers and mounting length for direct fit
- Multiple user reports of even spray pattern and steady fuel delivery out of the box
- Compatibility depends on exact part-number match so fitment must be verified for the Eclipse
- Aftermarket construction may not match long-term durability of higher-priced factory-brand injectors
Verdict A matched four-piece aftermarket injector kit that aims for factory-spec fit and even fuel delivery, but confirm part-number compatibility with your Mitsubishi Eclipse before purchasing.
4. Zxyculture Fuel Injector (replacement FJ344 / CDH-210)
| Manufacturer Part Number | FJ344 |
|---|---|
| Item model number | CDH-210 |
| Exterior | Stainless Steel |
| Compatible Engines | 3.0L (listed for Mitsubishi Eclipse) |
This Zxyculture fuel injector is an aftermarket replacement offered to restore fuel delivery on Mitsubishi Eclipse 3.0L models where the factory injector (FJ344/CDH-210) is required. It installs in place of the original injector and is designed to match the factory fit and spray pattern so the engine regains smooth idle, throttle response, and consistent fuel flow. For a budget repair it brings practical benefits: stainless steel exterior for corrosion resistance, claimed precision machining to maintain atomization, and a user-friendly design that keeps installation straightforward for a competent DIYer or a shop doing a single-injector swap. Limitations are typical of low-cost aftermarket parts: long-term durability versus a higher-quality factory replacement is uncertain, and the listing relies on cross-reference part numbers so you must confirm exact compatibility with your Eclipse before buying. Expect a cost-effective way to get your 3.0L Eclipse running again, but plan to monitor performance and consider OEM or higher-end options if longevity is critical.
Best for: Budget-conscious owners replacing a single failing injector on a Mitsubishi Eclipse 3.0L who prioritize low upfront cost and quick restoration of drivability.
Less Ideal for: Drivers seeking a long-term, warranty-backed factory-quality replacement or those restoring high-value vehicles should consider OEM or premium injectors instead.
- Made as a direct replacement for the FJ344/CDH-210 injector used on 3.0L Mitsubishi Eclipse engines
- Stainless steel exterior for improved corrosion resistance in engine bay conditions
- Designed for straightforward installation to simplify DIY replacement or quick shop service
- Aftermarket construction with limited long-term durability data compared with factory-quality injectors
- Compatibility must be verified against your vehicle part numbers rather than assumed from model listing
Verdict A low-cost, direct-fit aftermarket injector to get a Mitsubishi Eclipse 3.0L back on the road quickly, but consider OEM alternatives if durability is a priority.
5. Kacrik 4PCS Fuel Injectors 1465A500 (8-hole) for Mitsubishi Eclipse Cross 1.5L
| Compatible vehicle | Mitsubishi Eclipse Cross 1.5L (4B40) |
|---|---|
| Part numbers | 1465A500, 1465A500/577, EAT342 |
| Number of injection holes | 8 |
| Electrical terminals | 2 blade terminals |
These Kacrik fuel injectors are sold as a 4‑piece set intended to replace the factory injectors on the Mitsubishi Eclipse Cross 1.5L (4B40). They are described as direct plug‑in replacements with an 8‑hole nozzle pattern and two‑terminal blade connector for a standard 12‑volt automotive fuel system. In everyday use they restore fuel delivery after original injectors wear or clog, and the plug‑and‑play design means installation can be handled by a competent DIYer or a technician without modification. The product emphasizes compatibility with the Eclipse Cross lineup and lists common OEM part numbers for cross reference. Practical benefits include quick replacement of misfiring or fuel-starved cylinders and restoring drivability and fuel economy. Limitations to note are that this is an aftermarket part from a smaller brand, so long‑term durability and flow matching to the factory set may vary and professional testing or calibration is recommended when replacing all four injectors to ensure even performance across cylinders.
Best for: Risk‑averse mainstream buyers looking to restore reliable drivability on a Mitsubishi Eclipse Cross 1.5L without complex upgrades and preferring a direct replacement approach.
Less Ideal for: Drivers seeking performance tuning, precise high‑flow upgrades, or injectors with verified flow testing and long aftermarket track record should consider established performance brands or professional remanufactured options.
- Direct plug‑in design marketed for Mitsubishi Eclipse Cross 1.5L for straightforward installation
- 8‑hole nozzle pattern for finer fuel atomization compared with single‑hole injectors
- Sold as a matched 4‑piece set so all cylinders can be replaced at once
- Includes common OEM part numbers for easier cross‑referencing during fitment checks
- Aftermarket brand with limited long‑term reliability data compared with factory or well‑established aftermarket suppliers
- No detailed flow rate or calibration data provided which can affect engine balance if not matched
Verdict A budget-friendly direct-fit injector set for restoring stock drivability on a Mitsubishi Eclipse Cross 1.5L, but consider verified flow-matched or established-brand options for long-term certainty.
6. AUTOKAY Fuel Injector Flow-Matched Set (CDH-210) – Set of 4
| Replace Part Number | 68V-8A360-00-00 / CDH-210 |
|---|---|
| Fits Models | Mitsubishi Eclipse 2000-2005 |
| Number Of Pieces | 4 |
| Material | Brass, Stainless Steel |
These AUTOKAY injectors are sold as a flow-matched set of four intended to replace several OEM part numbers, including fitment for Mitsubishi Eclipse models from 2000–2005. They install like a factory replacement and are typically used to restore proper fuel delivery when the original injectors are clogged, leaking, or out of specification. Notable features include flow matching across the set to balance cylinders and inlet/outlet barb connections suitable for the original fuel rail plumbing. In practice buyers report quick installation and noticeably improved idle and power when the old injectors were problematic. Because these are refurbished or aftermarket units, quality control can vary so occasional failures, minor flow inconsistency, or missing engine-side seals have been reported. They are an economical way to get the engine running well again compared with dealer-priced replacement injectors but you should inspect seals and test flow where possible before long trips. Use with proper installation practices and reuse or replace the engine-side seals as needed.
Best for: Practical optimizers looking to restore engine performance on a budget and willing to do basic checks and reuse minor parts to avoid dealer costs.
Less Ideal for: Users who need guaranteed, new factory-quality injectors with full accessory seals and vendor testing or who cannot accept any risk of variability in refurbished parts.
- Flow-matched set reduces cylinder imbalance compared with mixed injectors.
- Direct-fit design for listed 2000–2005 Mitsubishi Eclipse engines simplifies installation.
- Lower cost alternative to dealer-sourced injectors for the same part numbers.
- Includes four injectors so a full-bank replacement is possible in one purchase.
- Aftermarket/refurbished nature leads to variable quality control and occasional nonfunctional units.
- Some buyers report one injector with slightly different flow which may require bench testing or swapping.
- Engine-side seals are not consistently included so separate seal purchase or reuse of original seals may be necessary.
Verdict A budget-friendly, flow-matched replacement set for Mitsubishi Eclipse owners who want to restore performance but who accept some variability versus new factory-quality injectors.
7. Bosch 62410 Fuel Injector — Single
| Material | Metal, Plastic |
|---|---|
| Inlet Connection Type | Barb |
| Outlet Connection Type | Barb |
| Number of Ports | 2 |
| Specification Met | OEM |
This Bosch 62410 is a single‑unit fuel injector engineered to match factory fit and spray characteristics for compatible engines. It is typically used as a direct replacement when an injector is leaking, clogged, or causing rough idle or fuel trim codes; installation is straightforward because Bosch includes the required seals and o‑rings. The injector is manufactured with corrosion‑resistant alloy internals and a plastic exterior to withstand ethanol blends and deliver consistent spray patterns that improve warm‑start performance, fuel economy, and drivability. Real‑world benefits include predictable throttle response and fewer emissions-related issues compared with worn injectors. Some buyers report variability in longevity when sourced from third‑party sellers, so verifying authenticity matters. Also this listing is a single injector, so replacing a full bank or set will require multiple purchases and added labor. For a Mitsubishi Eclipse, confirm engine and part compatibility before buying to ensure correct fitment.
Best for: Balanced buyers seeking a reliable, factory-quality injector replacement for maintenance or repair on their Mitsubishi Eclipse who prioritize consistent drivability and emissions performance.
Less Ideal for: Drivers looking for a complete multi-cylinder repair kit in one purchase or those who prefer remanufactured or performance aftermarket injectors tuned for modified engines.
- Factory-quality replacement with precision flow rates and original spray pattern
- Includes seals and o-rings so the injector is ready to install out of the box
- Built with corrosion-resistant materials and rated for ethanol fuel compatibility
- Designed to improve warm-start performance, fuel economy, and drivability
- Sold as a single injector so replacing multiple cylinders requires multiple purchases
- Authenticity can vary when not bought from verified Bosch channels, which can affect reliability
Verdict A factory-quality single replacement injector that restores OEM spray and drivability for compatible Mitsubishi Eclipse engines, but you must buy per cylinder and confirm exact fit.
Choosing the Right Mitsubishi Eclipse Fuel Injector: Key Factors to Consider
Flow Rate and Calibration
Flow rate determines how much fuel each injector delivers at a given pressure and plays a central role in air/fuel ratio control. Choosing an injector with the correct calibrated flow ensures the engine runs neither too lean nor too rich, which affects power, emissions, and fuel economy.
Mismatched flow rates can force ECU compensation that leads to drivability issues. Look for injectors with tight manufacturing tolerances and clear flow specifications. If you plan any engine modifications, pick injectors whose flow rate matches the altered fueling requirements to avoid prolonged tuning work.
Spray Pattern and Atomization
Spray pattern impacts how well fuel mixes with incoming air. Good atomization creates a fine mist that burns more completely, improving throttle response and reducing unburned fuel residues. The right spray pattern also supports smooth idle and consistent power delivery across the rev range.
Inspectors and service literature often note pattern type and angle; choose injectors whose spray characteristics suit the intake design and combustion chamber shape of the Mitsubishi Eclipse engine to maximize efficiency.
Electrical Connector and Impedance
Compatibility with the vehicle s wiring harness is essential for reliable operation. The injector s electrical connector shape, pin layout, and impedance should match the Mitsubishi Eclipse s original equipment to prevent misfires or ECU errors.
Low-impedance and high-impedance injectors behave differently with driving circuitry and can affect dwell times and current draw. Confirming impedance and connector type avoids the need for adapters or aftermarket driver modules.
Seals, Materials, and Corrosion Resistance
Seals and housing materials determine how well an injector resists fuel contaminants and environmental corrosion. High-quality O-rings and corrosion-resistant metals extend service life and reduce the chance of leaks that cause performance loss or smell of fuel.
Consider injectors with nitrile or Viton seals where appropriate for ethanol-blended fuels. Robust construction is especially important if the vehicle sees varied climates or infrequent use, which can accelerate seal degradation.
Serviceability and Maintenance
Some injectors are designed to be easily removed and serviced, while others are more or less disposable. Serviceable injectors that are compatible with common cleaning procedures can save money over time and restore performance without full replacement.
Evaluate how accessible the injectors are in the Eclipse engine bay and whether recommended cleaning methods align with your maintenance routine. Factory-style replacements that accept standard servicing tools and cleaning kits provide flexibility for long-term care.
Fitment and Installation Ease
Proper fitment minimizes installation time and reduces the risk of fuel leaks or electrical faults. Exact O-ring sizes, mounting dimensions, and rail fit are all relevant for a straightforward swap into a Mitsubishi Eclipse.
Choose injectors that specify vehicle compatibility or provide clear fitment data to avoid modification. Installation-friendly designs reduce the chance of cross-threading, damaged seals, or connector strain, helping ensure a reliable repair.
FAQ
What symptoms suggest a fuel injector is failing in a Mitsubishi Eclipse?
Failing injectors often cause rough idling, hesitation during acceleration, or reduced fuel economy. You may notice a misfire code on the dashboard or an uneven idle speed. Less common signs include strong fuel odor or hard starting, which usually appear as problems worsen.
Can I clean fuel injectors instead of replacing them?
Cleaning can restore performance for injectors clogged by deposits and is often effective for moderate fouling. Professional ultrasonic cleaning or fuel system cleaners can help, but severely worn or damaged injectors usually need replacement. Testing helps determine whether cleaning will be sufficient.
How do technicians test fuel injectors?
Technicians typically test injectors for electrical continuity, resistance, and leakage, and they may measure flow rates on a bench tester. Dynamic tests using an oscilloscope or injector pulse tool can reveal timing or response issues. Testing helps pinpoint whether a unit is clogged, leaking, or electrically faulty.
What causes fuel injector leaks and what are the signs?
Leaks often stem from degraded seals, damaged O-rings, or corrosion in the injector body. Symptoms include fuel odor, visible wetness around the injector or rail, and poor engine performance from inconsistent fuel delivery. Prompt attention is important to avoid fire risk and further engine damage.
Should I upgrade to higher-performance injectors?
Upgrading can be useful if you have engine modifications that demand greater fuel flow. However, larger injectors often require recalibration of fueling and may affect drivability at low loads. Evaluate whether gains in peak power justify additional tuning and supporting modifications.
How We Chose the Best Mitsubishi Eclipse Fuel Injector
We compiled this list by focusing on criteria that directly affect engine performance and long-term reliability in the Mitsubishi Eclipse. Primary filters included flow rate accuracy, spray pattern quality, and electrical connector compatibility to ensure consistent fuel delivery and proper atomization. Durability factors such as corrosion-resistant materials, robust seals, and recommended maintenance intervals were considered to reduce failure risk. Ease of installation and fitment for the Eclipse were evaluated to minimize installation time and reduce the chance of leaks. We also reviewed manufacturers' stated calibration tolerances and test protocols to judge consistency across units. Exclusions: we omitted units that lacked clear specifications, had no stated compatibility with the Mitsubishi Eclipse, or lacked basic durability details. The result is a shortlist of injectors that meet practical fit and performance standards for real-world use.
Our full evaluation process is outlined in our review methodology.
Conclusion
Selecting the right fuel injector for your Mitsubishi Eclipse comes down to matching flow rate, spray pattern, and electrical compatibility with your engine s needs. Prioritize injectors with clear specifications, durable seals, and fitment data that align with the Eclipse to reduce installation issues and long-term problems. Balance performance goals against serviceability and maintenance expectations. If deposits are the main concern, consider serviceable units or professional cleaning; for persistent electrical or mechanical failures, replacement with properly specified injectors is the more reliable solution.
Explore More:
- Check out all Mitsubishi Eclipse parts & accessories
- Explore Fuel System
- Browse all Auto Parts
