Note: This article contains affiliate links. If you click on these links and make a purchase, I may earn a small commission at no extra cost to you. This helps support my research and content. Read my full affiliate disclosure here.
If your Mitsubishi Eclipse shows ABS warnings or inconsistent braking feel, the right ABS wheel speed sensor can make a big difference in safety and drivability. You want a sensor that provides accurate wheel-speed data, mounts securely, and produces stable signals under real-world driving conditions.This guide covers our shortlisted top picks for the Mitsubishi Eclipse, chosen for their fitment accuracy, signal stability, and build reliability. We evaluated installation ease and durability as part of the selection process. Read on to understand the key criteria and what to prioritize when replacing a sensor.
Looking for other parts? See all Mitsubishi Eclipse parts & accessories.
Top Picks at a Glance
| Best Overall The best all-around choice for most situations | Garage-Pro ABS Wheel Speed Sensor Set for Mitsubishi Eclipse (2006–2012) |  |
| Best Quality Built to a higher standard if you want something more solid | A-Premium ABS Wheel Speed Sensor 2-Piece Set for 2006–2008 Mitsubishi Eclipse (Rear Left & Right) |  |
| Best Value The sweet spot between price and what you get | Motoforti ABS Wheel Speed Sensor Kit for Mitsubishi Eclipse (2009–2012) Rear Left and Right |  |
| Best budget The cheapest option that still gets the job done reliably | Holstein Parts ABS Wheel Speed Sensor (Front Left) |  |
| Highest Rated A top-rated pick with lots of positive feedback | A-Premium ABS Wheel Speed Sensor – Front Left Driver Side for Mitsubishi Eclipse |  |
| Most Popular A crowd favorite that many people choose with confidence | A-Premium ABS Wheel Speed Sensor for Mitsubishi Eclipse (Front Right) |  |
| Best Seller A high-volume bestseller chosen again and again | Holstein Parts ABS Wheel Speed Sensor (Front Right) |  |
1. Garage-Pro ABS Wheel Speed Sensor Set for Mitsubishi Eclipse (2006–2012)
| Specific Uses For Product | automotive |
|---|---|
| Output Type | Push-Pull |
| Material Type | Ceramic, Plastic, Stainless Steel |
| Part Interchange Info | ALS1817, MN113196, ALS1827, MN113195 |
This Garage-Pro replacement set supplies two ABS wheel speed sensors matched to the 2006–2012 Mitsubishi Eclipse to restore accurate wheel-speed input for the ABS and traction control systems. Installation is the typical direct-swap process used on factory-style sensors: unplug the old sensor, unbolt it from the hub, fit the new sensor and reconnect the wiring. The sensors use ceramic, plastic, and stainless steel components and come as paired pieces with common interchange numbers for straightforward parts matching. For drivers this delivers practical benefits: corrected ABS behavior, prevention of ABS fault codes, and a lower-cost alternative to dealer parts. The set is marketed as a factory-fit replacement and includes part interchange info to help confirm fitment. Limitations are that this is an aftermarket budget brand so long-term durability versus higher-end or OEM sensors may vary and professional diagnosis is recommended if underlying wiring or wheel bearing damage caused the original failure.
Best for: Balanced buyers who want an affordable, ready-to-install replacement to restore ABS and traction control functionality on a 2006–2012 Mitsubishi Eclipse without overpaying for dealer parts.
Less Ideal for: Drivers seeking guaranteed long-term lifespan from premium or OEM-branded sensors or those who need sensors with documented calibration data for performance applications should consider higher-end alternatives.
- Sold as a matched pair to replace both front or rear sensors at once
- Listed to specifically fit 2006–2012 Mitsubishi Eclipse for easier part matching
- Uses stainless steel components where exposed to road conditions
- Includes common interchange numbers to simplify verification before purchase
- Aftermarket budget brand so long-term durability can be less predictable than higher-end or factory parts
- No detailed performance or calibration data provided
Verdict: A practical, vehicle-specific two-sensor replacement set that restores ABS function on 2006–2012 Mitsubishi Eclipse models at a budget-friendly price.
2. A-Premium ABS Wheel Speed Sensor 2-Piece Set for 2006–2008 Mitsubishi Eclipse (Rear Left & Right)
| Compatible Models | Mitsubishi Eclipse 2006-2008 (Convertible/Coupe/Hatchback) |
|---|---|
| Location | Rear Left and Right |
| Connector Pins | 2 Pins |
| Mounting Type | Flange Mount |
| Material Type | Acrylonitrile Butadiene Styrene |
This A-Premium two-piece ABS wheel speed sensor set replaces the rear left and right sensors on 2006–2008 Mitsubishi Eclipse models and is intended to restore accurate wheel-speed input to the vehicle ABS and traction control systems. Installation is flange-mounted with a two-pin connector and is used whenever a faulty sensor causes ABS, traction control warnings, or uneven braking behavior. The sensors are made from ABS plastic, come factory-style in-line connectors, and are advertised as 100% performance tested to meet or exceed OEM standards, which should yield stable output signals and responsive readings. Practical benefits include direct replacement fitment and simplified wiring compatibility for the Eclipse rear hubs, plus a one-year unlimited-mileage parts guarantee for peace of mind. Limitations are that the parts are aftermarket components rather than factory-branded units and durability will depend on installation and local driving conditions.
Best for: Performance-oriented owners who prioritize restoring precise ABS and traction control behavior on a Mitsubishi Eclipse and want a ready-to-install, performance-tested replacement.
Less Ideal for: Customers seeking a factory-branded OEM sensor or extended warranty beyond one year should consider alternative factory-sourced or manufacturer-backed options.
- Direct rear left and right fit for 2006–2008 Mitsubishi Eclipse rear hubs
- Two-pin connector and flange mount match factory-style attachment for straightforward replacement
- Advertised 100% performance testing and OEM-spec compliance for stable signal output
- Includes a one-year unlimited-mileage parts guarantee
- Aftermarket brand rather than factory-branded sensor which may differ in long-term durability
Verdict: A-Premium provides a performance-tested, direct-fit rear sensor pair to quickly restore accurate ABS wheel-speed input on 2006–2008 Mitsubishi Eclipse models.
3. Motoforti ABS Wheel Speed Sensor Kit for Mitsubishi Eclipse (2009–2012) Rear Left and Right
| Vehicle Fit | Mitsubishi Eclipse 2009-2012 |
|---|---|
| OE Number | 4670A359/MN113198 |
| Placement | Rear Left and Right |
| Pin Count | 2 Pins |
| Material Type | Metal, Plastic, Rubber |
This Motoforti ABS wheel speed sensor kit replaces the rear left and right sensors on Mitsubishi Eclipse 2009–2012 models and provides wheel-speed signal input to the vehicle ABS controller. The kit includes two sensors with two-pin connectors and uses plastic, metal, and rubber components intended to withstand road exposure. Installation is straightforward for a competent DIYer: remove the wheel, unplug the old sensor, and plug in the replacement before reassembling. In use the sensor supplies the rapid wheel-speed measurement the ABS system needs for proper braking response and traction control operation. As a non-factory replacement, it aims to balance cost with acceptable fit and function rather than matching factory parts exactly. Buyers should check fitment against the OE numbers listed and be prepared for basic wiring or mounting differences that may require minor adjustments during installation.
Best for: Practical owners focused on keeping repair costs low while restoring ABS functionality without seeking an exact factory part match.
Less Ideal for: Those who require exact factory-spec replacements or extended manufacturer-backed warranties should consider OEM sensors or dealer-sourced units instead.
- Vehicle-specific fit for Mitsubishi Eclipse 2009–2012 rear left and right positions
- Includes both rear sensors in one set for convenient replacement
- Uses common plastic and metal construction to resist typical road conditions
- Simple remove-and-replace installation suitable for DIY mechanics
- Non-factory aftermarket part so fit or connector details may differ from factory sensors
- Limited manufacturer information and no stated warranty details
Verdict: A budget-minded, vehicle-specific replacement kit that restores rear ABS speed sensing on Mitsubishi Eclipse 2009–2012 models without the premium cost of factory parts.
4. Holstein Parts ABS Wheel Speed Sensor (Front Left)
| Position | Front Left |
|---|---|
| Material | Acrylonitrile Butadiene Styrene, Plastic |
| Manufacturer Part Number | 2ABS0702 |
| OEM Part Number | MN113195 |
This Holstein front-left ABS wheel speed sensor is a direct factory-quality replacement intended for Mitsubishi Eclipse models from the mid-2000s. It replaces a failed sensor to restore accurate wheel-speed data for the ABS and traction systems, and is installed in the wheel knuckle area using the vehicle's existing mounting points and connector. Notable features include reinforced plastic housings for durability, OEM-style connectors and terminals for a water-tight electrical connection, and included grommets and clips to match factory routing for a straightforward, low-friction install. For a budget-focused buyer this sensor delivers the core functions you need without extras, and the packaged anti-static bag protects the electronics during storage and shipping. Limitations are that it is sold individually so you must buy the correct side, and as an aftermarket alternative it may differ slightly in finish from factory originals even though fit and function are engineered to match. Verify exact fitment with your Eclipse trim and year before installing.
Best for: Budget-conscious Mitsubishi Eclipse owners who prioritize restoring ABS and traction operation at a low cost and who prefer straightforward, no-frills replacement parts.
Less Ideal for: Drivers seeking brand-new OEM parts with identical cosmetic finish or those who want matched pairs supplied together should consider alternative sources.
- Direct factory-quality replacement designed to restore ABS and traction control function
- Reinforced plastic housing for resistance to elements and everyday road conditions
- OEM-style connectors and terminals for a secure, water-tight electrical connection
- Includes grommets and wire clips to match factory mounting and routing for easier installation
- Sold individually so you must purchase the correct wheel side separately
- Aftermarket finish may differ slightly from the original part
Verdict: A no-frills, budget-friendly front-left ABS sensor that aims to restore factory-level ABS function on compatible Mitsubishi Eclipse models.
5. A-Premium ABS Wheel Speed Sensor – Front Left Driver Side for Mitsubishi Eclipse
| Compatible Models | Mitsubishi Eclipse 2006-2012 |
|---|---|
| Location | Front Left Driver Side |
| Connector Pins | 2 Pins |
| Mounting Type | Flange Mount |
| Material Type | Acrylonitrile Butadiene Styrene |
This A-Premium ABS wheel speed sensor is a direct-fit replacement for the front left driver side on 2006–2012 Mitsubishi Eclipse models. It measures wheel speed and sends an electrical signal to the vehicle's ABS control module, restoring proper anti-lock brake and stability control function after a failed sensor. The part includes a two-pin connector and a molded harness for straightforward installation and comes with pre-coated mounting brackets that match factory attachment points. Built from ABS plastic and factory-style mounting, it is tested for performance and intended to meet or exceed factory specifications, which helps ensure reliable readings and predictable braking behavior. Limitations include the generic aftermarket branding and dependence on correct vehicle selection for a true direct fit, so verify reference numbers before ordering. For owners seeking a dependable, budget-friendly replacement sensor to return ABS operation to normal, this unit is a practical option.
Best for: Reliability-focused owners who prioritize restoring factory braking and stability performance with an affordable, tested replacement part.
Less Ideal for: Buyers seeking original manufacturer parts or those who prefer a branded OEM sensor from the vehicle dealer for strict parts traceability.
- Direct-fit design for Mitsubishi Eclipse 2006–2012 front left location
- Includes molded wire harness and 2-pin connector for plug-and-play replacement
- Factory-style flange mount and coated brackets simplify installation
- Manufacturer states 100% performance testing and claims to meet or exceed factory specifications
- Aftermarket branding rather than known OEM supplier
- Fit and connector compatibility depend on exact vehicle configuration and should be confirmed
Verdict: A cost-effective, tested direct-fit replacement sensor to restore ABS and stability control on Mitsubishi Eclipse front left wheel assemblies.
6. A-Premium ABS Wheel Speed Sensor for Mitsubishi Eclipse (Front Right)
| Compatible Models | Mitsubishi Eclipse 2006-2012 |
|---|---|
| Location | Front Right Passenger Side |
| Connector Pins | 2 Pins |
| Mounting Type | Flange Mount |
| Output Type | Push-Pull |
This A-Premium ABS wheel speed sensor is a direct-fit replacement for the front right passenger side of Mitsubishi Eclipse models from 2006 through 2012. It reads wheel speed and sends that signal to the ABS control module via a two-pin connector and flange mount, and the listing notes a tested push-pull output and full performance testing. Typical use is as a like-for-like repair when a faulty sensor triggers ABS or traction-control faults or causes inconsistent speed readings. The sensor includes a wire harness for 2011–2012 models and arrives as a 100 percent new component made from ABS plastic with coated mounting hardware shown in images. Practical benefits are easy installation for owners doing a DIY swap and restored braking and stability system function without needing calibration. Limitations are standard for aftermarket sensors: material is plastic rather than metal in places and long-term durability depends on driving conditions and installation quality.
Best for: Convenience-driven buyers who want a simple, ready-to-install replacement to fix ABS or traction-control warnings quickly without sourcing OEM parts.
Less Ideal for: Buyers seeking a premium, long-life factory replacement or those needing sensors for other vehicles or different wheel positions should consider alternative parts.
- Direct-fit design for 2006–2012 Mitsubishi Eclipse front right position, simplifying replacement.
- Includes wire harness for 2011–2012 models so fewer extra parts are needed for those years.
- Factory-spec compatible connector and mounting style for straightforward installation.
- Sold as a new, performance-tested component to restore ABS and traction system signals.
- Constructed with ABS plastic and aftermarket components which may not match the longevity of higher-end OEM units.
- Limited vehicle fitment only for Mitsubishi Eclipse 2006–2012 front right side.
Verdict: A straightforward, direct-fit ABS wheel speed sensor that gets a Mitsubishi Eclipse back to normal ABS and traction operation with minimal fuss.
7. Holstein Parts ABS Wheel Speed Sensor (Front Right)
| Vehicle position | Front right |
|---|---|
| Material | Reinforced plastic housing |
| Manufacturer part number | 2ABS1759 |
| OEM part number | MN113196 |
This Holstein Parts ABS wheel speed sensor replaces a factory unit to restore the anti-lock braking and wheel-speed monitoring functions on compatible Mitsubishi Eclipse vehicles. It is used in the front-right wheel location and installs like a factory part, with OE-style connector, grommet, and wire clip to ease routing and mounting. The sensor housing is reinforced plastic for corrosion and impact resistance, and the wiring harness includes a protective sleeve on select SKUs to reduce abrasion and kinking. Practical benefits include a straightforward install for DIYers or technicians and a design intended to match the original fit and electrical connection so the ABS system operates normally after replacement. Limitations to note are that fitment is specific to select Eclipse model years and trims so you must verify compatibility, and as an aftermarket alternative it may differ slightly in finish from factory parts though function is intended to match.
Best for: Risk-averse mainstream buyers who prioritize a reliable, factory-compatible replacement to maintain ABS function and avoid warranty-risking modifications.
Less Ideal for: Buyers seeking a universal sensor for multiple vehicle models or high-performance specialty sensors should consider alternatives designed for broader fitment or enhanced performance.
- Designed as a direct factory-quality replacement for fit, form, and function
- OE-style connector and included grommet and wire clip simplify installation
- Reinforced plastic housing resists corrosion and road exposure
- Protective sleeve on the wire harness (select numbers) reduces abrasion risk
- Fitment limited to specific Mitsubishi Eclipse years and trims so verification is required
- Appearance and finish may differ slightly from the original factory unit
Verdict: A straightforward, factory-quality front-right ABS speed sensor for Mitsubishi Eclipse owners who want a dependable OEM-style replacement.
Choosing the Right Mitsubishi Eclipse ABS Wheel Speed Sensor: Key Factors to Consider
Fitment and Connector Compatibility
Correct fitment and connector match are essential because a sensor that does not physically align or electrically mate with the Eclipse harness will cause faults or require modification. Confirming the sensor's mounting style, flange dimensions, and connector type reduces installation time and the risk of intermittent contact.
A sensor that matches OEM geometry usually seats properly in the hub or knuckle and keeps the sensing air gap consistent. Even small misalignments can change the magnetic field or trigger wheel speed discrepancies, so accurate fitment is a primary selection factor.
Signal Quality and Noise Rejection
The ABS module depends on a steady, clean electrical signal to calculate wheel speed. Sensors with good signal quality and built-in noise rejection produce clearer pulses and reduce false readings.
Choose sensors designed to minimize electromagnetic interference and provide consistent amplitude across speeds. Better signal quality reduces the chance of ABS warning lights, erratic braking, or diagnostic codes related to speed sensor inputs.
Durability and Environmental Sealing
Wheel speed sensors operate in harsh environments with moisture, salt, and road debris, so durable housings and proper seals are critical. A well-sealed sensor resists corrosion of the magnetic or electronic elements and prevents water ingress that can short the circuitry.
Materials and protective coatings affect long-term reliability. Consider sensors with robust casings, reinforced cable jackets, and proven seals to minimize failures caused by exposure to the elements.
Mounting Hardware and Ease of Installation
Sensors that include compatible mounting hardware and straightforward instructions simplify replacement and reduce the chance of installation errors. Properly sized bolts, clips, or brackets ensure the sensor sits at the correct depth and angle relative to the tone ring or reluctor.
Ease of installation affects total repair time and the likelihood of achieving the correct sensor gap. If a sensor requires special adapters or modifications, it can introduce variability in performance and should be approached cautiously.
Electrical Resistance and Output Characteristics
Understanding a sensor's electrical resistance and output type helps ensure compatibility with the vehicle's ABS module. Different sensor designs produce varying voltage or frequency outputs at given wheel speeds, and the module expects signals within a certain range.
Matching output characteristics prevents misinterpretation of wheel speed by the ABS unit and reduces the risk of fault codes. If technical specifications are available, compare them to known ranges for the Mitsubishi Eclipse application.
Longevity and Maintenance Considerations
Consider expected lifespan and whether the sensor design allows easy inspection or replacement during routine maintenance. Sensors that tolerate common maintenance tasks, such as cleaning around the mounting area, tend to last longer.
Also evaluate whether replacement cables or seals are available if the harness sustains damage. Factoring in longevity helps avoid frequent rework and keeps the ABS system functioning reliably over time.
How We Chose the Best Mitsubishi Eclipse ABS Wheel Speed Sensor
We focused on criteria that matter for the Mitsubishi Eclipse application and for restoring reliable ABS operation. Primary filters included precise vehicle fitment and connector compatibility, because correct mating prevents installation issues and intermittent faults. Signal fidelity and noise rejection were evaluated to ensure the sensor supplies clean speed data to the ABS module during varied driving conditions. Mechanical robustness and sealing were considered to avoid premature failure from road debris and moisture. Installation complexity and availability of compatible mounting hardware were factored to reflect real-world replacement scenarios. We also looked at expected lifespan based on materials and design rather than brand claims.We excluded units without explicit fitment information for the Mitsubishi Eclipse, sensors lacking manufacturer technical specifications, and parts that require extensive vehicle-specific modifications. The resulting list prioritizes sensors that meet strict fitment, electrical, and durability requirements for this vehicle.
Our full evaluation process is outlined in our review methodology.
FAQ
What are common symptoms of a failing ABS wheel speed sensor on a Mitsubishi Eclipse?
Typical symptoms include an illuminated ABS warning light, inconsistent braking feel, or traction control behaving erratically. You may also notice diagnostic trouble codes related to wheel speed inputs. These signs often appear intermittently before a complete failure, so early attention can prevent loss of ABS functionality.
Where is the ABS wheel speed sensor located on the Mitsubishi Eclipse?
The sensors are mounted at each wheel hub or near the wheel bearing assembly, positioned to read the tone ring or reluctor teeth. Location can vary slightly by model year, but they are generally accessible from the wheel well once the wheel and any splash shields are removed.
Can I perform an ABS sensor wiring test myself?
Basic wiring checks like continuity and resistance measurements are often possible with a multimeter and some mechanical access. You can inspect the connector for corrosion, test for proper resistance values, and check for damaged wiring. More advanced signal tests require an oscilloscope or diagnostic scanner to view waveform quality under rotation.
What causes an ABS sensor code like P0500 to appear?
Codes pointing to vehicle speed sensor faults often stem from a weak or missing speed signal, damaged wiring, poor connector contact, or a physically degraded sensor. Debris on the tone ring or missing reluctor teeth can also cause erroneous readings that trigger codes. Diagnosis should confirm whether the issue is electrical, mechanical, or sensor-related.
Is it better to replace the wheel speed sensor or attempt to repair it?
Repairing wiring or connectors can resolve issues when the sensor itself is still sound. However, if the sensor shows internal corrosion, intermittent output, or physical damage, replacement is usually more reliable. Consider the age of the sensor and accessibility when deciding between repair and replacement.
How long should a properly installed ABS wheel speed sensor last on the Mitsubishi Eclipse?
A well-made and properly installed sensor typically lasts many years under normal driving conditions, but longevity depends on exposure to road salt, moisture, and physical impacts. Routine inspections during brake service can catch early signs of wear and extend service life by addressing mounting or routing issues promptly.
Conclusion
When choosing an ABS wheel speed sensor for a Mitsubishi Eclipse, prioritize correct fitment, clean signal output, and robust environmental sealing. These factors have the most direct impact on ABS reliability and the likelihood of recurring faults.Balance ease of installation and long-term durability against any minor tradeoffs in connector or mounting design. Focusing on the electrical and mechanical compatibility with the Eclipse will help restore predictable ABS and traction control performance.
Explore More:
- Check out all Mitsubishi Eclipse parts & accessories
- Explore ABS Wheel Speed Sensors Maintenance & Repair Guides
- Explore Electrical System
- Browse all Auto Parts
