Note: This article contains affiliate links. If you click on these links and make a purchase, I may earn a small commission at no extra cost to you. This helps support my research and content. Read my full affiliate disclaimer here.
Getting the right Mitsubishi Lancer wheel hub assembly matters because the hub directly affects wheel alignment, handling, and vehicle safety. Worn or failing hubs can cause vibration, noise, and uneven tire wear, so replacing the hub with a correctly matched unit is essential for dependable everyday driving. This guide highlights seven shortlisted options that meet common fitment and durability expectations. We evaluated each pick on fitment accuracy, bearing life, and build quality so you can make a practical choice. Read on to find the assemblies that best match your Lancer and driving needs.
Looking for other parts? See all Mitsubishi Lancer parts & accessories.
Top Picks at a Glance
| Best Reviewed A top-rated pick with lots of positive feedback | TRQ Rear Wheel Bearing & Hub Assembly Set (2-piece) |  |
| Most Popular A crowd favorite that many people choose with confidence | TRQ Front Wheel Bearing & Hub Assembly Set, 2-Piece |  |
| Best Quality Built to a higher standard if you want something more solid | Detroit Axle Rear Wheel Hub Bearing Assembly (Pair) for Mitsubishi Lancer / Outlander Sport / RVR |  |
| Best Budget The cheapest option that still gets the job done reliably | TRQ 2-Piece Rear Wheel Bearing & Hub Assembly Set for 2002–2007 Mitsubishi Lancer |  |
| Most Sold A high-volume bestseller chosen again and again | MOTOKU Front Wheel Hub Bearing Assembly for Mitsubishi Lancer FWD |  |
| Best Value for Money The sweet spot between price and what you get | TRQ Rear Wheel Bearing and Hub Assembly Set (2‑Piece) for Mitsubishi Lancer/Outlander Rear |  |
| Best Overall The best all-around choice for most situations | Detroit Axle 4pc Front and Rear Wheel Bearing Hub Assembly Kit for 2008–2015 Mitsubishi Lancer (5‑lug) |  |
1. TRQ Rear Wheel Bearing & Hub Assembly Set (2-piece)
| Fitment | Rear assemblies for specified Mitsubishi Lancer model years with rear disc brakes |
|---|---|
| Quantity | 2 Piece |
| Bearing Type | Ball Bearing |
| Exterior | Machined |
This TRQ kit includes two pre-assembled rear wheel hub and bearing units intended as direct-fit replacements for qualifying Mitsubishi Lancer rear disc brake applications. It is typically used to restore wheel mounting, eliminate wheel-end noise or vibration, and regain secure wheel bearing performance during routine repair or after failure. Notable features include machined exterior surfaces, ball-type bearings, and factory-aligned fit that reduce installation time compared with separate bearing and hub swaps. TRQ also supplies DIY installation videos to help independent installers and home mechanics. Practical benefits are straightforward fitment to the listed Lancer model years and the convenience of receiving both left and right rear assemblies in one kit. Important limitations are variable long-term durability reported by some users and occasional fit issues with wheel studs on certain applications, so careful pre-purchase fit confirmation and inspection at install are advisable.
Best for: Reliability-focused buyers who prioritize restoring safe, quiet rear wheel operation on a Mitsubishi Lancer with a practical, do-it-yourself friendly replacement.
Less Ideal for: Drivers seeking premium OE-level longevity who prefer OEM-brand hubs or professional installers who demand matching OE stud specifications may want to consider higher-end alternatives.
- Direct-fit, pre-assembled left and right rear assemblies for quicker installation
- Ball bearing design and machined exterior aimed at reducing noise and vibration
- Includes both rear driver and passenger side units so both sides are replaced together
- TRQ provides step-by-step DIY videos to assist independent installers
- Some customers report early failures or quality control variability on a minority of units
- Wheel stud length or thread pitch may differ from factory on certain applications requiring stud reuse or replacement
Verdict A convenient, budget-conscious direct-fit rear hub and bearing pair for compatible Mitsubishi Lancers that speeds installation but may show variability in long-term durability.
2. TRQ Front Wheel Bearing & Hub Assembly Set, 2-Piece
| Quantity | 2 Piece |
|---|---|
| Bearing Type | Ball Bearing |
| Compatible Lubricant | Grease |
| Exterior | Machined |
This TRQ two-piece kit supplies both front driver and passenger side wheel bearing and hub assemblies as direct-replacement components for compatible Mitsubishi Lancer models. It is typically used to replace noisy or worn front hubs to restore smooth, quiet rolling and proper wheel alignment. Notable features include pre-assembled hub units, ball-type bearings, grease-compatible seals, and machined exteriors that simplify installation and reduce the need for additional machine work. Practical benefits include straightforward direct-fit installation that saves shop time, elimination of wheel-end noise and vibration when the original hubs are failing, and the convenience of replacing both sides at once. Some buyers report occasional quality variation and rare missing hardware out of the box, so careful inspection on receipt is advisable and replacement axle hardware may be required. Long-term durability varies by use and installation technique, so proper torqueing and staking of axle fasteners during install is important to avoid premature failure.
Best for: Practical, convenience-driven owners who value quick, direct-fit repairs and want a ready-to-install front hub pair to reduce shop time and complexity.
Less Ideal for: Owners seeking guaranteed long-term OEM-level longevity for high-mileage or heavy-use Lancer builds should consider higher-tier branded or dealer-sourced hub units instead.
- Sold as a two-piece kit covering both front sides so you replace both hubs at once
- Pre-assembled hub assemblies reduce installation time and eliminate press-fit bearing work
- Ball-bearing design and grease-compatible seals aimed at quiet operation and longevity
- Machined exterior and factory-replacement fit help ensure alignment and mounting ease
- Some buyers reported missing or incomplete hardware in rare shipments
- Quality consistency varies across units which can affect longevity in high-mileage vehicles
Verdict A convenient, direct-fit two-piece front hub and bearing kit for Mitsubishi Lancer owners who want a faster DIY or shop replacement, but inspect parts on arrival due to occasional quality variability.
3. Detroit Axle Rear Wheel Hub Bearing Assembly (Pair) for Mitsubishi Lancer / Outlander Sport / RVR
| Bearing Number | 512382 |
|---|---|
| Lugs | 5 Bolts |
| Flange Type | 4-Bolt Square |
| ABS Type | Encoder |
| Position | Rear Left and Right |
This Detroit Axle kit supplies two rear wheel hub bearing assemblies intended as a direct replacement for the rear left and right positions on compatible Mitsubishi AWD models. Each assembly includes a 5-lug flange with a 4-bolt square mounting pattern and an encoder-style ABS interface, so it is used when replacing worn bearings or noisy hubs and when restoring rear axle stability. The listing highlights high-frequency quenching and premium bearing steel for improved wear and corrosion resistance, and the assemblies are built to match factory fit and function for a straightforward installation. Practical benefits include restored wheel alignment and ABS sensor compatibility without modifying the vehicle, plus reduced vibration and smoother rotation compared with failing bearings. Limitations are typical of aftermarket hub assemblies: careful fit verification is required for model-year fitment and some customers report occasional bent studs from shipping that require replacement before install.
Best for: Performance-oriented buyers who prioritize restoring factory handling and ABS function on Mitsubishi Lancer and related AWD models will appreciate the focus on durability and precise fitment.
Less Ideal for: DIY owners looking for a universal hub for multiple makes or non-AWD conversions should consider vehicle-specific alternatives or a shop-sourced factory replacement.
- Sold as a matched left and right pair for one-step replacement
- Encoder-type ABS interface preserves factory wheel speed sensing
- Manufactured with high-frequency quenching and bearing-grade steel for improved wear resistance
- Designed to match factory fit and mounting pattern for simple installation
- Some units have arrived with bent studs requiring replacement before installation
- Fitment must be confirmed to the exact model and AWD configuration prior to purchase
Verdict A factory-style, performance-minded replacement pair for rear hubs on compatible Mitsubishi AWD models that emphasizes durable bearing steel and direct-fit installation.
4. TRQ 2-Piece Rear Wheel Bearing & Hub Assembly Set for 2002–2007 Mitsubishi Lancer
| Set Name | 2 Piece Rear Wheel Bearing & Hub Assembly Set |
|---|---|
| Bearing Type | Ball Bearing |
| Material | High Carbon Steel |
| Fitment | 2002–2007 Mitsubishi Lancer rear driver and passenger side |
This TRQ two-piece rear wheel bearing and hub assembly set replaces both left and right rear units on 2002–2007 Mitsubishi Lancer models. The assemblies arrive pre-assembled to simplify installation and are intended as direct-fit replacements that save time compared with rebuilding an existing hub. Built with high carbon steel and ball-type bearings, they are commonly used to stop road noise and restore smooth, stable rear-wheel operation. Practical benefits include pre-assembled components that reduce press work and a strong aftermarket reputation with DIY installation videos available from the maker. Expect an affordable option that fits correctly in most Lancer rear knuckles and noticeably reduces whine or rumble when the original bearings are worn. Limitations to consider are variable quality control reported by some buyers and the possibility of missing hardware on rare units, so inspect parts on arrival and have replacement axle nuts or fasteners on hand during installation.
Best for: Budget-conscious Lancer owners who prefer a cost-effective, do-it-yourself repair that restores rear-wheel quietness and function without paying for premium factory replacements.
Less Ideal for: Owners seeking factory-quality longevity or professional shops that require certified OEM-grade parts for warranty-sensitive repairs should consider higher-end alternatives.
- Direct-fit replacements for 2002–2007 Mitsubishi Lancer rear hubs to simplify installation
- Pre-assembled hub and bearing units reduce time and need for pressing bearings
- Made from high carbon steel with ball-type bearings for typical road durability
- Includes both driver and passenger side units so you replace the entire axle pair at once
- Some buyers report inconsistent quality control and occasional missing hardware
- Not all units have proven long-term durability compared with higher-end factory-quality bearings
Verdict A wallet-friendly, pre-assembled rear hub pair that restores rear-wheel quietness on 2002–2007 Mitsubishi Lancer models but check parts on arrival for missing hardware.
5. MOTOKU Front Wheel Hub Bearing Assembly for Mitsubishi Lancer FWD
| Brand | MOTOKU |
|---|---|
| Material | Metal |
| Bearing Type | Plain Bearing |
| Compatible Lubricant | Grease |
This MOTOKU front wheel hub bearing assembly is a one-piece replacement designed to swap into the front of compatible Mitsubishi Lancer FWD models. It arrives as a hub with the bearing preinstalled so installation is mainly pressing and bolting the unit into the steering knuckle, which speeds repairs compared with rebuilding the old hub. The listing emphasizes metal construction and grease-lubricated plain bearing internals. For routine use it restores wheel location, wheel speed sensor alignment where applicable, and the correct mounting surface for the brake rotor and wheel. Buyers report generally accurate fit and good packaging, though some customers flagged inconsistent bearing quality and isolated defective units that produced noise. This product is best when you need a straightforward, budget-friendly replacement hub and are prepared to inspect or replace the bearing if it shows play after installation.
Best for: Risk-averse mainstream buyers who prioritize getting their Mitsubishi Lancer back on the road with a straightforward, off-the-shelf replacement rather than sourcing individual bearings or reman parts.
Less Ideal for: Drivers seeking a premium, long-life upgrade or professional shops that require guaranteed high-end bearing performance should consider branded OE-equivalent or premium hubs instead.
- Supplied as a complete hub assembly so no separate bearing press-fit step is required for most installs
- Fits the Mitsubishi Lancer FWD model years listed for direct replacement
- Metal construction and grease-lubricated bearing for standard road use
- Well packaged for transit according to multiple buyer reports
- Some buyers reported noisy or defective bearings indicating variable quality control
- Not all units match the longevity of higher-end factory-quality hubs
Verdict A budget-friendly, complete front hub assembly for Mitsubishi Lancer FWD that simplifies replacement but may show inconsistent bearing quality.
6. TRQ Rear Wheel Bearing and Hub Assembly Set (2‑Piece) for Mitsubishi Lancer/Outlander Rear
| Fitment | Rear driver and passenger side for select Mitsubishi Lancer (2012–15 SE, 2016–17 AWD) and Outlander (2007–13 5‑passenger AWD) |
|---|---|
| Bearing Type | Ball Bearing |
| Quantity | 2 Piece Kit |
| Compatible Lubricant | Grease |
This TRQ two-piece rear wheel bearing and hub assembly set replaces both rear driver and passenger side units on compatible Mitsubishi Lancer and Outlander models. It arrives pre-assembled so installation is straightforward for a DIYer or a shop, and TRQ provides installation videos to guide the process. The assemblies use ball bearings with grease lubrication and a machined exterior intended to match factory mounting points, which helps restore quietness and stability when highway whine or rumble develops. Most owners report a correct fit and noticeably reduced noise after replacement, making it an effective repair for worn rear hubs. On the downside there are a few reported quality-control failures and inconsistent packaging that required returns, so careful inspection on arrival is sensible. If long-term durability is your highest priority you may prefer a different brand, but for a practical optimizer needing a cost-effective, direct-fit rear hub repair for Mitsubishi Lancer applications this kit balances convenience and value.
Best for: Buyers seeking a cost-conscious, practical replacement that restores rear hub function and quietness on a Mitsubishi Lancer without paying for premium branded options.
Less Ideal for: Drivers prioritizing longest-possible factory-quality longevity or those unwilling to inspect received parts should consider higher-end alternatives or purchasing through a local parts supplier with return support.
- Sold as a two-piece kit covering both rear sides for one convenient repair
- Pre-assembled direct-fit design reduces installation time and need for modifications
- Includes ball bearings with grease lubrication for standard long-life operation
- Brand provides step-by-step installation videos to support DIY fitment on Mitsubishi Lancer rear hubs
- Some customers reported parts arriving damaged or missing hardware requiring returns
- A small number of units showed functional failures under load in isolated reports
Verdict A practical, pre-assembled rear hub kit that restores quiet and fit for Mitsubishi Lancer rear hubs at an accessible price, but inspect parts on arrival due to occasional quality issues.
7. Detroit Axle 4pc Front and Rear Wheel Bearing Hub Assembly Kit for 2008–2015 Mitsubishi Lancer (5‑lug)
| Fitment | 2008–2015 Mitsubishi Lancer AWD |
|---|---|
| Quantity | 4 pieces (front and rear) |
| Lugs | 5 bolt |
| Rear ABS Type | Encoder |
| Front ABS on Hub | No |
This Detroit Axle kit supplies complete front and rear wheel bearing hub assemblies intended to replace the factory units on AWD Mitsubishi Lancer models from 2008–2015. The kit includes four hub assemblies sized for 5‑lug wheels with encoder‑style ABS at the rear and non‑ABS hubs up front, so it covers both sides for a full axle refresh. In real-world use the parts bolt in like typical replacement hubs and reviewers report straightforward installation and immediate improvement in steering feel and wheel stability. The practical benefits are that you get a complete, vehicle‑specific set that avoids mixing individual left/right pieces and lets you do a full-service repair in one job. Limitations to consider are that this is an aftermarket replacement rather than factory parts and some users report variability in long‑term durability across Detroit Axle products, so professional installation and inspection after break‑in miles is advisable. The kit is a sensible option for bringing worn hubs back to solid service without dealer parts sourcing.
Best for: Balanced buyers who want a single, vehicle‑specific hub kit to renew wheel bearings and improve road feel without sourcing individual parts or paying dealer prices.
Less Ideal for: Owners seeking guaranteed OEM long‑term durability or those who prefer dealer parts and support should consider factory‑quality alternatives instead.
- Complete 4‑piece kit covers both front and rear hubs so you can replace all wheel bearings at once.
- Vehicle‑specific fit for 2008–2015 AWD Mitsubishi Lancer reduces part‑matching errors.
- Includes rear encoder ABS compatibility so speed‑sensor signals remain functional.
- Reportedly straightforward installation that restores steering responsiveness and wheel stability.
- Aftermarket construction may not match factory longevity for some high‑mileage or heavy‑use vehicles.
- Front hubs are non‑ABS on the hub requiring compatibility check with vehicle ABS tone rings if applicable.
Verdict A convenient, vehicle‑specific 4‑piece hub kit that restores wheel stability and steering feel for AWD Mitsubishi Lancers, with typical aftermarket durability considerations.
Choosing the Right Mitsubishi Lancer Wheel Hub Assembly: Key Factors to Consider
Exact Fitment and Bolt Pattern
Correct fitment is the most important factor because the hub must match the vehicle's bolt pattern, stud size, and mounting flange dimensions exactly. A hub that does not align precisely can cause wheel runout, vibration, and uneven stress on studs and bearings. Always verify OEM-style mounting measurements and any sensor or tone ring interfaces.
Fitment also affects installation time and the need for additional parts. Choosing an assembly documented for the Mitsubishi Lancer reduces the risk of returns and rework. If fitment documentation is ambiguous, plan for additional verification steps before installation.
Bearing Type and Load Rating
The bearing inside the hub determines how the assembly handles radial and axial loads during driving. Higher load ratings and robust bearing types typically last longer under heavy use or when the vehicle carries loads. Consider the bearing design and whether it matches the vehicle's intended duty cycle, such as daily commuting versus frequent heavy loads.
A hub with a higher-quality bearing can reduce noise and vibration and extend service intervals. Look for clear specifications on bearing dimensions and load capacity rather than vague durability claims.
Sealing and Corrosion Resistance
Effective seals prevent contaminants like water and grit from entering the bearing area, which is crucial for longevity. Corrosion-resistant coatings on the hub and fasteners help maintain structural integrity in wet or salted-road conditions. Poor sealing or inadequate corrosion protection accelerates bearing failure and can lead to premature assembly replacement.
Evaluate the type of grease used, seal design, and any protective finishes when choosing a hub for climates prone to moisture or road salt. Better sealing reduces maintenance frequency.
ABS and Sensor Compatibility
Many Mitsubishi Lancer models use ABS or wheel-speed sensors that rely on a tone ring or integrated sensor mounting. A hub assembly must support these features if the vehicle is equipped. Mismatched or missing sensor interfaces will cause fault codes and disable ABS functions until corrected.
Confirm whether the assembly includes an ABS tone ring, the correct sensor mounting provisions, or requires reuse of the factory tone ring. Clear documentation of sensor compatibility avoids diagnostic headaches after installation.
Mounting Design and Ease of Installation
Mounting design affects how straightforward the replacement will be. Hubs that replicate the OEM mounting orientation and provide pre-installed studs or sealed bearings reduce install time and risk. Consider whether the assembly allows reuse of factory components like seals or requires specific tools for press-fitting.
An assembly that simplifies installation can lower labor and reduce chances of installation errors. Also check for clear torque guidance and whether additional components, such as retainers or circlips, are included or needed.
Manufacturing Tolerances and Vibration Control
Tighter manufacturing tolerances in the hub bore, flange face, and bearing race help minimize runout and vibration. Poor tolerances can lead to steering shimmy, uneven tire wear, and a noisy ride. Look for documentation on concentricity, runout limits, or quality control processes.
Vibration control also depends on balanced construction and consistent bearing preload. Hubs manufactured to closer tolerances typically result in quieter operation and a more stable driving experience.
FAQ
How do I know if my Mitsubishi Lancer wheel hub assembly is failing?
Common signs include a humming or grinding noise from the wheel area, vibration at speed, and uneven tire wear. You might also notice ABS warning lights if the hub includes a sensor interface. A road test and physical inspection of wheel play can help confirm a worn hub.
Can I replace a wheel hub assembly myself on a Mitsubishi Lancer?
Replacing a hub assembly can be a DIY job for someone with mechanical experience and the right tools, such as a torque wrench and possibly a puller or press. The job often involves removing the wheel, brake components, and possibly axle hardware. Follow vehicle-specific torque specs and safety procedures; when in doubt consult a professional.
Should I replace the hub on just one side or both at the same time?
It often depends on condition. If one hub failed due to wear, the opposite side may have similar mileage and wear patterns. Replacing both reduces the chance of uneven performance and future downtime, but many repairs are done on a single affected side when the other shows good service life.
Does a hub assembly replacement require an alignment afterward?
Replacing a hub assembly does not always require a full alignment if suspension geometry is unchanged. However, if components that affect alignment are disturbed or if you notice steering pull or uneven tire wear after installation, a wheel alignment is recommended.
How long does a typical wheel hub assembly last on a Mitsubishi Lancer?
Hub life varies with driving conditions, load, and maintenance. Many last for many tens of thousands of miles under normal driving, while exposure to water, dirt, or heavy loads can shorten service life. Regular inspection for noise or play helps catch issues early.
What should I bring to a shop if I need professional help with hub replacement?
Provide the vehicle year and model details and describe the symptoms you observed, such as noise or vibration. Mention whether the ABS light is on and whether you suspect front or rear hub problems. This information helps technicians diagnose and confirm correct hub fitment quickly.
How We Chose the Best Mitsubishi Lancer Wheel Hub Assembly
To create this list we applied focused, vehicle-specific filters that reflect the most important requirements for Mitsubishi Lancer wheel hub assemblies. Key evaluation criteria included fitment accuracy to ensure correct bolt pattern and sensor interfaces, bearing type and load rating to reflect expected longevity, sealing and corrosion resistance for durability in varied climates, and manufacturing tolerances that affect vibration and noise. We also considered mounting design and ABS tone ring compatibility when applicable, plus materials and corrosion protection for long-term reliability. Products that lacked clear fitment documentation, used unspecified bearing specifications, or omitted critical mounting measurements were excluded. We prioritized assemblies that documented torque-related guidelines and maintenance compatibility. The resulting shortlist balances ease of installation, long-term bearing performance, and reliable fitment for typical Lancer model requirements.
Our full evaluation process is outlined in our review methodology.
Conclusion
Choosing the right Mitsubishi Lancer wheel hub assembly means prioritizing exact fitment, bearing quality, and appropriate sealing for your driving conditions. Pay attention to ABS compatibility and documented mounting dimensions to avoid installation issues. Balance longevity against installation ease and serviceability. By focusing on the factors above you can select an assembly that restores quiet, stable wheel operation and reduces the likelihood of repeat repairs.
Explore More:
- Check out all Mitsubishi Lancer parts & accessories
- Explore Wheels & Tires
- Browse all Auto Parts
